Paul Industries builds process-equipment and sanitary-piping systems for regulated manufacturing across twelve industries, from pharmaceutical, biotech and medical device through dairy, meat and poultry, distilling and cannabis extraction. As a single-source contractor with 30+ years of cGMP/FDA-compliant experience, we design, fabricate, install, and validate the water systems, cleanrooms, CIP/SIP, sanitary piping, tanks, and process equipment each industry depends on — across the United States.
Industries we serve
Every regulated industry has its own standards, materials, and validation demands. We tailor the design, equipment, and documentation to yours — under one accountable contract.
Building or upgrading a regulated facility?
Tell us your industry, systems, and standards — a Paul Industries engineer will follow up to scope your project.
Request a Project Quote or call 201-450-8280Frequently asked questions
Which industries does Paul Industries serve?
Pharmaceutical and biotechnology manufacturing, medical devices and diagnostics, cosmetics, dietary supplements, and food and beverage processing. The engineering overlaps heavily across them, because a sanitary loop is a sanitary loop. What diverges sharply is the evidence regime, and that is where the cost separates. A pharmaceutical system carries qualification and change control for its whole life; a food system built to 3-A Sanitary Standards is verified largely on cleanability and visual criteria.
Does Paul Industries only work with pharmaceutical companies?
No, and assuming pharmaceutical standards apply everywhere is how projects get over-specified. Cosmetics manufacture generally falls under ISO 22716 good manufacturing practice, dietary supplements under 21 CFR 111, food and beverage under 3-A Sanitary Standards, and medical devices under ISO 13485 and 21 CFR 820. None of those require compendial water or electropolished ASME BPE surfaces the way a parenteral drug does, and specifying them anyway adds cost an auditor will never ask about.
What do these industries have in common?
They all rely on high-purity water, sanitary process piping, controlled environments, and reliable cleaning, and most operate under cGMP or comparable good-manufacturing standards. That shared need for clean, cleanable, documented process systems is exactly what Paul Industries builds and validates.
How does Paul tailor systems to different industries?
Paul scales water grade, surface finish, cleanroom classification, and validation depth to each industry’s requirements, WFI and heavy validation for injectable pharma, purified water and Part 111 controls for nutraceuticals, 3-A hygienic design for food and beverage. The engineering fits the regulatory context. Call 201-450-8280.
Do different industries follow different standards?
Yes. Pharmaceutical and biotech follow cGMP with USP and ASME BPE, cosmetics often follow ISO 22716, food and beverage follow 3-A and FDA food-safety rules, and dietary supplements follow 21 CFR Part 111. Paul builds and documents to the standards that apply to your industry.
Can Paul Industries serve my industry if it’s not listed?
If your operation needs high-purity water, sanitary piping, cleanrooms, or validated process utilities, Paul can likely help even if your exact sector isn’t named. The underlying engineering, sanitary, cleanable, documented systems, transfers across regulated manufacturing. Call 201-450-8280 to discuss your application.
What does Paul build for the pharmaceutical industry?
High purity water systems producing USP Purified Water and Water for Injection with their distribution loops, clean steam generation, sanitary process piping to ASME BPE, cleanrooms and controlled environments, CIP and SIP systems, autoclave installation and qualification, passivation and derouging, and the installation and operational qualification that makes all of it defensible. In practice a large share of the work is modification of running plant rather than greenfield construction.
What does Paul build for the biotech industry?
Much the same systems as pharmaceutical, with the emphasis shifted downstream. Bioreactor and fermenter interconnects, media and buffer preparation vessels, buffer hold systems, single-use assembly integration alongside cleanable stainless, and the water capacity to support them, which in a monoclonal antibody facility is driven by downstream buffer demand rather than by the bioreactor. Endotoxin control becomes a design constraint rather than a monitoring afterthought, since it is heat-stable and survives sanitization.
What does Paul build for food and beverage manufacturers?
Process water, sanitary piping and tanks built to 3-A Sanitary Standards rather than ASME BPE, CIP and COP systems, heat exchangers, and clean steam where sterilization is genuinely required. The cleaning problem differs from pharmaceutical work in a way that matters: the dominant risk is usually allergen carryover rather than active ingredient residue, so acceptance is verified with allergen-specific test methods rather than by conductivity or total organic carbon on a final rinse.
Does Paul Industries serve all these industries nationwide?
Yes, and the practical question for a multi-site manufacturer is consistency rather than coverage. Where each plant engages a different contractor, weld documentation formats, passivation certificate scopes and qualification protocols diverge, and a corporate quality group ends up reconciling them during an inspection. Working to one written procedure with the same verification tests and record format across sites removes that, and makes condition trending comparable between plants rather than a set of incompatible local records.
Why does industry experience matter for a process contractor?
Each industry carries its own standards, water grades, and validation expectations, so a contractor that understands the regulatory context builds the right system the first time. Paul’s cross-industry experience means the design fits your compliance framework rather than forcing a generic template onto it. Call 201-450-8280.
How is a cosmetic project different from a pharmaceutical project?
Cosmetic projects often center on purified water and ISO 22716 practices without injectable-grade requirements, while pharmaceutical projects may require WFI and extensive validation. Paul matches the water grade, finish, and documentation to each, so you don’t overbuild or underbuild. Call 201-450-8280.
Does Paul serve medical-device manufacturers?
Yes, and device work is where over-specification is most common. ISO 13485 and 21 CFR 820 require that processes be validated and product contact surfaces be suitably clean and non-contaminating; they do not mandate ASME BPE or compendial water. A 316L line to ASME B31.3 Normal fluid service with a documented mechanical finish frequently satisfies the requirement at roughly 40 percent less per linear foot. Where passivation is a product operation on implants, ASTM F86 applies rather than A967.
Can one contractor really cover so many industries?
The systems are more alike than the industries are. A sanitary loop, a CIP circuit and a clean steam header are engineered the same way whether the product is a vaccine or a sauce; the hydraulics, drainability and weld quality do not change. What changes is the documentation and the acceptance criteria, and that is a matter of knowing which regulation binds. The genuine risk is the reverse of the question: a contractor who applies pharmaceutical standards to everything, and charges for it.
How do I find what Paul builds for my specific industry?
Visit the page for your industry, pharmaceutical, biotech, cosmetic, food and beverage, or nutraceutical, to see the systems Paul builds and the standards it works to, then call to scope your project. Each page details the water, piping, cleaning, and validation that sector needs. Call 201-450-8280.
How do I start a project for my industry?
Tell us the product and the regulation you operate under first, because those two determine the specification more than the equipment list does. Then send what you have: isometrics or a layout, the fluids and their service conditions, existing utility capacity, your shutdown window, and the documentation you require at turnover. If the specification in front of you carries requirements your regulation does not actually impose, we will say so before pricing it rather than after.
Request a project quote
Tell us about your system, media, and standards — a Paul Industries engineer will follow up to scope your project.