Paul Industries provides chiller repair in Virginia from its headquarters at 256 Shore Drive, Kilmarnock, diagnosing and repairing centrifugal, screw and scroll chillers at manufacturing plants, hospitals, universities and data centers across the Commonwealth. Virginia’s long, humid cooling season, an aging stock of R-22 and R-123 machines, and the EPA’s 2026 leak repair rule make each repair a decision about the next ten years as well as the next week. Paul Industries repairs, overhauls, retrofits and replaces chillers, and supplies and installs replacement equipment where repair no longer makes sense.
Request a quote or call 201-450-8280
What does chiller repair in Virginia involve?
Chiller repair in Virginia covers fault diagnosis, refrigerant leak location and repair, compressor and motor work, tube cleaning and eddy current testing, control and starter repair, and the records the EPA now requires for leaks, on machines that typically carry cooling load from late spring into autumn and, in data centers and hospitals, all year. The work on a given visit depends on the machine type and the fault, but the Virginia context changes three things: how hard the chiller has been working, which refrigerant rules apply to it, and when in the year the repair can be scheduled without losing cooling.
The national picture of faults, symptoms and repair methods is set out on the chiller repair page. This page goes into what is particular to Virginia: the climate the machines run in, the buildings they serve, the refrigerant they hold and the decisions owners in the Commonwealth face in 2026 and after.
How Virginia’s cooling season loads a chiller
Virginia’s cooling season loads a chiller with both heat and humidity, because most of the state east of the Blue Ridge, along with the southern Shenandoah and Roanoke valleys, has a humid subtropical climate. Richmond’s July normals are a 90 degree Fahrenheit high and a 69 degree low (NOAA, 1991 to 2020), and a 69 degree night in humid air still asks the chiller to remove moisture from outdoor air brought into the building. The latent load is why Virginia chillers often run through the night in July and August, and why run hours pile up faster than in a dry climate with similar daytime temperatures.
Humidity also limits what a cooling tower can do. A tower cools condenser water toward the outdoor wet bulb temperature, not the dry bulb, so on humid afternoons the condenser water comes back warmer, the compressor works against a higher lift, and every fouled tube or weak tower fan shows up as high head pressure. The mountains in the west are cooler and less humid, which shortens the season there but brings freezing nights that matter for machines left full of water in winter.
| Region | Typical condition | What it does to the chiller | Repair and service emphasis |
|---|---|---|---|
| Hampton Roads and the Eastern Shore | Humid summers, salt-laden air near the water | Corrosion of air-cooled condenser coils, fin loss, electrical enclosure corrosion | Coil inspection and coating, enclosure sealing, refrigerant leak checks at corroded joints |
| Richmond, Petersburg and Hopewell | Hot, humid summers and heavy process loads | High condenser water temperature, long run hours, condenser tube fouling | Tube cleaning, tower performance, oil analysis and vibration trending |
| Northern Virginia | Humid summers plus year-round data center and office loads | Few opportunities to take machines offline; high run hours on every unit | Repairs staged one machine at a time with redundancy confirmed first |
| Shenandoah Valley, Roanoke and Lynchburg | Shorter season, colder winters | Freeze risk in idle evaporators and outdoor piping | Winter layup or glycol protection, spring startup checks |
| Southside and Charlottesville | Humid summers, campus and plant central plants | Peak loads during summer sessions and production runs | Overhauls in the shoulder months, controls tuning for part load |
Why do chillers surge in a Virginia summer?
Centrifugal chillers surge when the compressor cannot produce enough pressure rise to push refrigerant gas into the condenser, so the flow momentarily reverses through the impeller, and Virginia summers bring on the conditions that cause it: warm condenser water on humid days combined with light load at night. Surge sounds like a loud, repeated whoosh or bang from the compressor, and repeated surging damages bearings, seals and the impeller itself.
The usual causes are a condenser water supply temperature that is too high for the load, fouled condenser tubes that raise the condensing pressure, non-condensable gases in a low-pressure machine, a tower that cannot hold its setpoint, or controls that let the machine run at very low load against high lift. Paul Industries diagnoses surge by trending condenser and evaporator approach temperatures, checking purge records, measuring tower approach on the hot afternoons when surge occurs, and reviewing the control settings for minimum load and condenser water reset. The fix may be tube cleaning, tower repair, a purge repair or a control change rather than compressor work, and the compressor is opened only when the data point to it.
Which Virginia buildings run their chillers hardest?
Hospitals, data centers, manufacturing plants and university central plants run their chillers hardest in Virginia, because their loads continue through the night, through the shoulder seasons and, in many cases, through the winter. Each building type also limits when a machine can be taken out of service, which shapes how a repair is planned.
| Building type | Cooling profile | How the repair is planned |
|---|---|---|
| Hospitals and medical centers | Around the clock; surgical suites and labs hold tight temperature and humidity limits | Backup capacity confirmed before shutdown; temporary cooling for critical areas where redundancy is thin |
| Data centers | Year-round load, redundant machines | One unit at a time under a written method of procedure, with redundancy verified at each step |
| Pharmaceutical and chemical plants | Process cooling plus space conditioning; validated areas | Repairs timed to production shutdowns; change records for validated systems |
| University central plants | Campus loops serving dozens of buildings; summer sessions and research labs | Overhauls in winter and spring; staged so the loop keeps its minimum capacity |
| Office and government buildings | Daytime peak, weekend setback | Weekend or shoulder-season outages; temporary chillers only for long jobs |
| Food and beverage plants | Process water and glycol loads tied to production | Repairs between production runs; glycol strength checked at the same visit |
HVAC chiller repair at Virginia hospitals
For hospitals, HVAC chiller repair is often the most delicate case, because the same plant serves comfort cooling and areas where temperature and humidity limits are part of infection control: operating rooms, sterile processing, pharmacies and isolation rooms. Before a machine is isolated, Paul Industries checks the remaining capacity against the expected load for the outage window, confirms that air handlers serving critical areas can hold their setpoints on the reduced plant, and connects temporary cooling where that margin is thin. The repaired machine is run under load and its safeties tested before it rejoins the plant.
Industrial chiller repair in Virginia plants
Industrial chiller repair in Virginia plants follows the production calendar. Pharmaceutical plants in Petersburg and Albemarle County, chemical plants along the James, and food and beverage plants in the Shenandoah Valley all have cooling loads tied to batches or lines, and a chiller fault can stop product, not just comfort. Paul Industries plans repairs into scheduled shutdowns wherever possible, carries likely parts for the planned window, and, for validated areas, provides the change and test records that the plant’s quality system needs to close the work. Process machines that serve a single line are covered on the process chillers page.
Commercial chiller repair in Virginia offices, campuses and government buildings
Commercial chiller repair in Virginia office towers, government buildings and campuses follows weekends, holidays and the shoulder months, when the building can ride on reduced capacity. Larger repairs are scheduled for late autumn through early spring, and temporary chillers are brought in only where a repair will outlast the cool weather.
Refrigerant rules for Virginia chiller owners under the AIM Act
The American Innovation and Manufacturing (AIM) Act shapes chiller repair decisions in Virginia through three EPA programs: the phasedown of HFC production and imports, the Technology Transitions limits on refrigerants in new equipment, and the 2024 Emissions Reduction and Reclamation rule, whose leak repair requirements took effect on January 1, 2026. Older HCFC machines sit under a separate phaseout that is reaching its end.
The phasedown caps HFC production and consumption at 60 percent of the baseline from 2024 through 2028, 30 percent from 2029 through 2033, and 15 percent from 2036, an 85 percent reduction. Existing chillers can keep running on HFCs such as R-134a and be serviced with them, but supply tightens step by step. New comfort-cooling chillers manufactured, imported or installed from January 1, 2025 must use refrigerants with a global warming potential below 700, and industrial process chillers with leaving fluid at or above minus 30 degrees Celsius followed on January 1, 2026.
| Refrigerant | Typical machines | Regulatory status | Repair implication |
|---|---|---|---|
| R-22 (HCFC) | Older screw and reciprocating machines | Production and import ended January 1, 2020; existing systems may keep running on reclaimed supply | Repair for short horizons; plan retrofit or replacement before a major failure |
| R-123 (HCFC) | Low-pressure centrifugal chillers | Import allowances end in 2030; reclaimed R-123 may still service existing machines | Leak tightness and purge performance protect a shrinking supply; plan the long-term path now |
| R-134a (HFC) | Centrifugal and screw chillers built over the last three decades | Exchange value 1,430; phasedown caps tighten in 2029 and 2036 | Repairable and serviceable; leak repair rule applies at 15 pounds or more |
| R-410A (HFC blend) | Scroll chillers and smaller air-cooled units | Exchange value 2,088; new comfort chillers limited to GWP below 700 | Repairable; a replacement chiller will use a different refrigerant |
| Lower-GWP HFOs and blends | New and recently installed chillers | Meet the GWP limits for new equipment | Technicians need training on the specific refrigerant and its safety class |
The leak repair rule is the part that changes day-to-day service. From January 1, 2026, owners of appliances holding 15 pounds or more of an HFC refrigerant must calculate a leak rate each time refrigerant is added. Comfort-cooling machines are held to a 10 percent annual leak rate threshold, industrial process refrigeration to 30 percent and commercial refrigeration to 20 percent; once a machine exceeds its threshold, the leak must be repaired within 30 days, or 120 days when an industrial process shutdown is needed, and confirmed with initial and follow-up verification tests. Paul Industries keeps those calculations and test records with each repair, so the owner’s file shows the leak rate, the repair and the verification together.
Repair or replace: the decision for a Virginia chiller
The repair or replace decision for a Virginia chiller turns on five things: the refrigerant the machine holds, the condition of the compressor and heat exchanger tubes, the efficiency gap against a new machine at Virginia electricity prices, the leak history under the new EPA rule, and whether the building can tolerate the outage a replacement needs. A sound chiller with a repairable fault and a current refrigerant usually earns its repair; a machine with failing tubes, an HCFC charge and a rising leak rate usually does not.
| Factor | Points toward repair | Points toward replacement |
|---|---|---|
| Refrigerant | R-134a or a current low-GWP refrigerant | R-22, or R-123 with no plan for supply after 2030 |
| Compressor | Fault confined to a component such as a bearing, seal or vane actuator | Repeat failures, damaged impeller or rotors, motor rewound before |
| Tubes | Eddy current shows limited wall loss; few tubes plugged | Widespread pitting or wall loss; plugging near the design allowance |
| Leak history | One identifiable leak, repaired and verified | Repeated leak rate exceedances under the 2026 rule |
| Efficiency | Measured performance close to the original rating | Large gap to a new machine across Virginia’s long run hours |
| Capacity | Load unchanged since installation | Load has grown or shrunk, leaving the machine poorly matched |
Energy is where Virginia’s long season matters most. As an illustration, a 500-ton chiller that runs the equivalent of 3,000 full-load hours a year and improves from 0.75 to 0.55 kilowatts per ton after replacement saves about 300,000 kilowatt-hours a year, or roughly $27,000 at Virginia’s 2024 average industrial price of 8.99 cents per kilowatt-hour (EIA). The figure is an example with stated assumptions; Paul Industries runs the same calculation on the owner’s own trend data, tonnage and electric rate before recommending either path.
Tube cleaning and eddy current testing on Virginia machines
Tube cleaning and eddy current testing are the two heat exchanger services that most often restore a Virginia chiller’s capacity and tell the owner how much life the machine has left. Condenser tubes on open cooling tower systems collect scale, silt and biological growth, and the warm, humid summers that keep towers running also favor biological fouling. Fouled tubes raise condensing pressure, cut capacity and, in centrifugal machines, push the compressor toward surge.
Paul Industries cleans condenser and evaporator tubes mechanically with rotating brushes, or chemically where scale is too hard to brush, then tests a sample or all of the tubes by eddy current. Eddy current testing measures wall loss, pitting and cracking from inside each tube, and the results decide whether tubes are plugged, the bundle is retubed, or the chiller is replaced. Recurring fouling points back to the tower and its water, so the same visit often leads to cooling tower repair or a review of cooling tower water treatment. Plate and shell-and-tube exchangers elsewhere on the loop are covered by heat exchanger repair.
Chiller maintenance requirements for Virginia facilities
Chiller maintenance requirements for Virginia facilities come from three sources: the manufacturer’s maintenance schedule, the EPA leak rate and recordkeeping rules for refrigerant, and the building code that governed the installation, which for current work is the 2021 Virginia Mechanical Code, effective January 18, 2024, with its refrigeration requirements drawing on ASHRAE 15. ASHRAE/ACCA 180 sets out a standard practice for inspecting and maintaining commercial HVAC equipment that many owners adopt as their written program.
| When | Task | Why it matters in Virginia |
|---|---|---|
| Every refrigerant addition | Leak rate calculation and record | Required from January 1, 2026 for HFC systems of 15 pounds or more |
| Daily or by monitoring system | Pressures, temperatures, approaches, oil levels, purge run time | Rising approach on humid days is the earliest warning of fouling |
| Before the cooling season | Tube inspection or cleaning, tower startup, controls and safeties check | Sets the machine up for months of high-lift operation |
| Annually | Oil analysis, vibration readings, refrigerant analysis, starter and motor checks | Finds compressor wear before it becomes a summer failure |
| Every several years | Eddy current testing; compressor inspection or overhaul per manufacturer hours | High annual run hours bring these intervals around sooner |
| Before winter (idle machines) | Drain or protect evaporators and outdoor piping | Freeze damage in the Valley, Roanoke and the mountains |
Paul Industries offers that program as scheduled chiller service in Virginia under service contracts, with refrigerant analysis judged against AHRI 700 purity limits where reclaimed refrigerant is in use.
How is cooling kept on during a summer chiller repair?
Cooling is kept on during a summer chiller repair in Virginia by one of three means: running the remaining machines harder while the faulty one is out, shifting load away from noncritical areas, or connecting a temporary chiller to the plant. The choice depends on how much margin the plant has on a humid afternoon, not on an average day, so the first step is a load estimate for the hottest hours of the planned repair window.
Where temporary cooling is needed, the connection points decide how quickly it can be put to work. Plants with valved, capped connections on the chilled water headers can take a rental machine with hoses and a short electrical tie-in; plants without them need a cut-in, which is best done once and left in place. Paul Industries installs permanent temporary-cooling connections during a repair or overhaul when a plant lacks them, so the next summer outage starts with the hardest part already done. The temporary machine needs its own power source, a level pad within hose reach, and, for water-cooled rentals, a condenser water arrangement, all of which are planned before the original chiller is opened.
After the repair, the returning machine is started on load, its approaches and pressures are compared with the readings taken before the fault, and the temporary unit is removed only when the repaired chiller has carried the afternoon peak.
Who services chillers in Virginia?
Paul Industries services chillers in Virginia from its headquarters at 256 Shore Drive in Kilmarnock, taking chiller repair, overhaul, retrofit and replacement work from Hampton Roads and Richmond to Northern Virginia, Charlottesville, Lynchburg, Roanoke, the Shenandoah Valley, Petersburg and Southside, and in all 50 states. Paul Industries works on centrifugal, screw and scroll machines of the major makes, including Trane chiller repair, York chiller repair and Carrier chiller repair.
Because the same contract can cover the machine, the tower, the pumps and the piping around them, one diagnosis follows the fault wherever it sits. The piping side is described on process piping in Virginia, and heating plants on the same campus on boiler repair in Virginia. For data center plants, repairs are planned with the redundancy rules described on data center mechanical contractor in Virginia.
Chiller repair pricing in Virginia: what moves the number
The cost of chiller repair in Virginia is driven by the fault and the parts it needs, the machine’s size and type, refrigerant recovery and recharge, access and rigging, whether temporary cooling is needed during the outage, and the time of year the work must be done. A bearing or control repair is a small fraction of a compressor rebuild, and a compressor rebuild is a fraction of a replacement, which also brings rigging, electrical and piping work.
Refrigerant has become a cost line of its own. HCFC refrigerants now come from reclaimed supply, and HFC prices respond to each step of the phasedown, so a large leak on an older machine can cost more in refrigerant than in labor. Paul Industries prices repairs after diagnosis, with the refrigerant quantity, parts and labor shown separately, and gives a budget range for replacement alongside any major repair so the owner can compare the two.
Chiller repair and replacement from Paul Industries in Virginia
Paul Industries is a Virginia-based contractor, headquartered in Kilmarnock on the Northern Neck, that repairs, overhauls, retrofits, maintains, supplies and installs chillers for plants, hospitals, universities, data centers and commercial buildings across the Commonwealth. For a repair, send the chiller make, model and serial number, the refrigerant and charge, the alarm history and recent operating logs; for a replacement study, add the load profile and electric rate. Call 201-450-8280 or request a quote. The Virginia page lists the process, water and piping work Paul Industries delivers across its home state.
Standards referenced: EPA AIM Act HFC phasedown (40 CFR Part 84) · EPA Emissions Reduction and Reclamation rule, 40 CFR 84.106 · EPA Technology Transitions rule · Clean Air Act Section 608 · 2021 Virginia Mechanical Code · Virginia Uniform Statewide Building Code · ASHRAE 15 · ASHRAE/ACCA 180 · AHRI 700
Frequently asked questions
Who handles chiller repair in Richmond, Petersburg and Hopewell?
Paul Industries handles chiller repair in Richmond, Petersburg, Hopewell, Henrico and Chesterfield from its headquarters in Kilmarnock, Virginia. Plants and hospitals in the Richmond region run long, humid summers, so condenser tube fouling, high head pressure and surge on centrifugal machines are frequent repairs there. Send the chiller make, model, refrigerant and recent alarm history, and Paul Industries scopes the diagnosis and repair.
Does Paul Industries provide chiller repair in Northern Virginia data centers and offices?
Yes. Paul Industries provides chiller repair in Northern Virginia for data centers, office buildings, government facilities and campuses in Loudoun, Fairfax, Prince William and Arlington. Data center chillers are repaired one unit at a time under a written method of procedure, with redundancy confirmed before each machine is isolated, so the plant keeps its design capacity while the work proceeds.
Who provides chiller repair in Virginia Beach, Norfolk and the rest of Hampton Roads?
Paul Industries provides chiller repair in Virginia Beach, chiller repair in Norfolk, and service in Chesapeake, Newport News, Hampton and Suffolk. Coastal machines face salt air, which corrodes air-cooled condenser coils, fins and electrical enclosures, and corroded brazed joints are a common source of refrigerant leaks. Inspections there cover coil condition and coatings as well as the refrigeration circuit.
Who installs chillers when a Virginia repair turns into a replacement?
Paul Industries installs the replacement as well. When a diagnosis shows a chiller is not worth repairing, Paul Industries supplies the new machine or installs an owner-furnished one, handles refrigerant recovery from the old unit, rigging, piping and electrical connections, startup and the records for the new refrigerant. Keeping the repair and the replacement under one contractor means the diagnosis that justified replacement also sets the scope of the new installation.
How much does it cost to replace a chiller in a Virginia facility?
Replacement cost depends on tonnage, machine type, refrigerant, rigging access, electrical changes, piping modifications and whether temporary cooling is needed during the changeover. Removal and refrigerant recovery from the old machine add to the total. Paul Industries prepares a budget range from comparable scope once the tonnage and site conditions are known, and a firm price after a site survey of access, structure and electrical service.
Can an R-22 chiller still be repaired in Virginia?
Yes. EPA ended production and import of R-22 on January 1, 2020, but it does not require existing R-22 equipment to be retired, and reclaimed R-22 may still be used for service. The question is cost and risk: reclaimed refrigerant is limited, a large leak is expensive to recharge, and parts for older machines get harder to source. Paul Industries repairs R-22 machines and prices a retrofit or replacement alongside, so the owner sees both paths.
What does the EPA leak repair rule require of a Virginia chiller owner from 2026?
From January 1, 2026, owners of appliances holding 15 pounds or more of an HFC refrigerant must calculate a leak rate every time refrigerant is added. If the rate exceeds 10 percent for comfort cooling or 30 percent for industrial process refrigeration, the leak must be repaired within 30 days, or 120 days where an industrial process shutdown is needed, then confirmed by initial and follow-up verification tests. Records are kept for each step.
Do new chillers installed in Virginia have to use low-GWP refrigerants?
Yes, for most new equipment. Under EPA’s Technology Transitions rule, new comfort-cooling chillers manufactured, imported or installed from January 1, 2025 must use refrigerants with a global warming potential below 700. Industrial process chillers with leaving fluid at or above minus 30 degrees Celsius followed on January 1, 2026. Existing chillers are unaffected and can keep running and being serviced on their current refrigerant.
What happens to R-123 centrifugal chillers as the HCFC phaseout ends in 2030?
EPA’s import allowances for virgin R-123 end in 2030, after which existing machines rely on recovered, reclaimed and previously produced refrigerant. Low-pressure centrifugal machines can run for many years if they stay tight, so leak repair and purge maintenance protect both the machine and its refrigerant supply. Owners with several R-123 machines are wise to set a replacement or retrofit sequence now, so changes happen on a schedule rather than after a failure.
Why does a chiller run all night during a Virginia summer?
Humidity keeps it running. Richmond’s July normal low is 69 degrees Fahrenheit, and outdoor air at that temperature in a humid climate still carries moisture that the cooling system must remove before it enters the building. Hospitals, labs, data centers and plants also have internal loads that do not fall at night. Long run hours are normal, but they bring compressor overhaul and tube inspection intervals around faster than manufacturer schedules based on lighter duty assume.
How do salt air and coastal conditions affect chillers in Hampton Roads?
Salt-laden air corrodes aluminum fins, copper tubes and steel cabinets on air-cooled chillers, and corrosion at brazed joints and fin-to-tube contact cuts capacity and causes leaks. Coil coatings, regular fresh-water rinsing, sealed electrical enclosures and inspection of joints slow the damage. Paul Industries inspects coil condition during each service visit near the coast and recommends coil replacement or recoating before a corroded coil starts leaking refrigerant.
When should a Virginia chiller be overhauled?
Late autumn through early spring suits most Virginia buildings, because cooling loads are lowest and a machine can be taken out of service with the least risk. Universities often prefer the period between the end of the summer session and the next spring, and plants schedule around production shutdowns. Data centers and hospitals with year-round load overhaul one machine at a time in any month, with redundancy confirmed before each machine comes offline.
What do eddy current results tell a Virginia plant about its condenser tubes?
Eddy current testing measures wall loss, pitting and cracks inside each tube, so the plant learns how many tubes are near failure and whether the damage is spread across the bundle or concentrated. A few bad tubes are plugged. Widespread wall loss means retubing or replacement, because one tube failure on a water-cooled machine lets water into the refrigerant circuit, an expensive repair. Trending results over successive tests shows how fast the bundle is wearing.
How much do Virginia power prices weigh in a chiller repair or replace decision?
Virginia’s 2024 average industrial electricity price was 8.99 cents per kilowatt-hour, against 8.13 nationally (EIA), and Virginia chillers run long seasons. That combination makes the efficiency gap between an old machine and a new one worth calculating. Paul Industries uses the owner’s tonnage, run hours and actual rate to estimate annual savings, then compares them with the cost difference between repair and replacement before recommending either.
Can a hospital chiller be repaired without losing cooling to surgical suites?
Usually, yes. The repair is planned around the hospital’s backup capacity: the remaining machines are checked, the load during the outage is estimated, and temporary cooling is connected for critical areas where redundancy is thin. Work proceeds under the hospital’s own outage and infection control procedures, and the machine is tested before it rejoins the plant. Paul Industries plans the outage with the facility team before the machine is isolated.
What should a Virginia facility send to get a chiller repair priced?
Send the chiller make, model and serial number, the refrigerant type and charge, the alarm or fault history, recent operating logs with pressures and temperatures, the last service report and any refrigerant addition records. For coastal and older machines, photos of the condenser coils or nameplate help. Paul Industries uses that information to plan the diagnostic visit, then prices the repair with parts, refrigerant and labor shown separately.
What does chiller service in Virginia include under a Paul Industries contract?
Paul Industries offers scheduled service covering seasonal startup and shutdown, operating log review, leak rate records under the 2026 EPA rule, oil and refrigerant analysis, vibration readings, tube cleaning and periodic eddy current testing. Contracts can include the cooling towers, pumps and water treatment that serve the chillers, so one program covers the whole plant.
How should chillers be laid up for winter in the Shenandoah Valley and Roanoke?
Machines that sit idle over winter should have their evaporators and any outdoor piping drained or protected with glycol, because a frozen tube bundle splits and lets water into the refrigerant circuit. Control power is often left on to run crankcase or oil heaters. In spring, Paul Industries refills, checks refrigerant charge and safeties, and starts the machine under load before the first warm spell.
Can a university central plant keep running while one chiller is rebuilt?
In most cases, yes. Central plants are designed with several machines, and a rebuild in the cooler months uses the capacity margin that exists when campus loads drop. The plan confirms that the remaining chillers, pumps and towers can carry the expected load, including research buildings with year-round cooling, and sets a fallback if the weather turns warm. Paul Industries stages the rebuild to fit that window.
Need a chiller repaired somewhere in Virginia?
Send the chiller make, model and serial number, the refrigerant, the alarm history and recent operating logs. Call 201-450-8280 or request a quote.
