Paul Industries is a single-source contractor that designs, fabricates, installs, validates, and maintains process-equipment and sanitary piping systems for pharmaceutical, biotech, cosmetic, nutraceutical, and food & beverage manufacturing facilities across the United States. With more than 30 years of cGMP/FDA-compliant experience, we cover the full project lifecycle — engineering, skid fabrication, orbital-welded installation, IQ/OQ/PQ validation, and preventive maintenance — under one accountable contract.

Not sure which service fits? Describe the problem and we will tell you how we would handle it. Request a project quote or call 201-450-8280.

Industries servedPharmaceutical · biotech · cosmetic · nutraceutical · food & beverage
Service areaNationwide (all 50 states)
Full scopeDesign → fabrication → installation → commissioning → validation → maintenance
StandardsASME B31.3 · ASME BPE-2022 · cGMP / 21 CFR 211 · ISO 14644 · IQ/OQ/PQ

Process-equipment & piping services

Each capability below can be delivered on its own or bundled into a turnkey project managed end-to-end by Paul Industries. Because design, fabrication, installation, and validation sit under one contract, you get a single point of accountability instead of coordinating separate engineers, mechanical contractors, and validation firms.

Water systems and treatment

High-Purity Water Systems (USP, WFI, RO/DI)USP purified water, water-for-injection (WFI), RO/EDI, and distillation systems with sanitary distribution loops, ozone or hot-water sanitization, and full IQ/OQ/PQ.Read →Ultrapure Water SystemsUltrapure water systems explained: the treatment train, 18.2 megohm-cm resistivity, TOC, loop piping and sanitization, and how Paul builds and services it.Read →Oil Water SeparatorsOil water separator types, sizing, compressor condensate units, tanks, discharge rules and maintenance, and how Paul designs, installs and cleans them.Read →Industrial DI Water SystemsWhat an industrial DI water system is, how it works, two-bed vs mixed bed, sizing, piping and maintenance, and how Paul builds and services it.Read →Industrial Water TreatmentIndustrial water treatment systems designed, installed and serviced: raw water filtration, softening, RO/DI, boiler, cooling and wastewater pretreatment.Read →Commercial Water SoftenersCommercial water softener systems sized, installed, serviced and repaired: how softening works, sizing, duplex tanks, regeneration and troubleshooting.Read →Boiler Water TreatmentBoiler water treatment systems and deaerators installed and serviced: makeup pretreatment, deaerator types, water chemistry, blowdown and condensate.Read →DeaeratorsDeaerator installation, piping, inspection and repair for boiler feedwater: how a deaerator works, tray vs spray types, pressure, sizing and cracking.Read →Process FiltrationCartridge, micro-, ultra-, and rotary filtration integrated into high-purity water, product, and utility systems.Read →Industrial HVACMakeup air, process exhaust, air handlers, controls and cleanroom HVAC for production and lab buildings.Read →Chilled Water SystemsHow a chilled water system works: chillers, pumps, piping, primary-secondary and variable primary flow, insulation, flushing, treatment and maintenance.Read →Cooling Tower Water TreatmentMakeup treatment, chemical feed, conductivity-controlled blowdown, side stream filtration and Legionella control for evaporative cooling towers.Read →High-Purity Water FiltrationFiltration within PW and WFI systems — RO, ultrafiltration, 0.2-µm sterilizing and endotoxin-reducing filters, integrity-tested and validated.Read →

Data center systems

Chillers and cooling

Heat ExchangersSanitary and industrial heat exchanger installation, replacement, and service for heating, cooling, and thermal control of process fluids.Read →Plate Heat ExchangersPlate heat exchanger and plate and frame heat exchanger service: gasket replacement, cleaning, leak testing, repair and installation for process and HVAC.Read →Heat Exchanger RepairHeat exchanger repair for shell and tube and tubular units: failure causes, leak finding, chemical cleaning, repair vs replace and a maintenance schedule.Read →Process ChillersProcess chiller and cooling-system installation paired with preventive-maintenance contracts to protect uptime.Read →Chiller RepairChiller repair for air-cooled, water-cooled and glycol chillers: symptoms, compressor and leak repair, overhauls, repair vs replace and replacement scope.Read →Carrier Chiller RepairCarrier chiller repair for 19XR, 19XRV, 23XRV, 30XA, 30HX, 30RB and 30RAP units: oil faults, alarm logic, tube work, maintenance and overhaul decisions.Read →Trane Chiller RepairTrane chiller repair for CenTraVac, Series R and CGAM machines: nameplates, purge and oil faults, latched diagnostics, maintenance, rebuild or replacement.Read →York Chiller RepairYork chiller repair for YK, YT, YD, YMC2, YVAA, YCIV, YLAA and YCAL machines: model numbers, fault messages, oil systems, maintenance and overhauls.Read →Ammonia RefrigerationAmmonia refrigeration system design, installation, repair and maintenance for food, dairy and cold storage plants, with the cycle and PSM rules explained.Read →Cooling Tower RepairCooling tower repair, rebuild, replacement and installation: fans, gearboxes, fill, basins and leaks, plus what drives cost, from Paul Industries.Read →Process Cooling SystemsWhat a process cooling system does, how to define the load and choose an arrangement, and how Paul Industries designs, installs and services the plant.Read →Closed Loop Cooling SystemsA closed loop cooling system explained: how it works, open vs closed, water use, design and upkeep, and how Paul designs, installs and services them.Read →Glycol Cooling SystemsHow a glycol cooling system works, how much glycol to use, design, piping, flushing, maintenance and leaks, and how we install and repair industrial loops.Read →Cooling Tower Cleaning, Maintenance & RepairCooling tower cleaning, disinfection, maintenance and repair: basins, fill, fans, gearboxes, motors, leaks and Legionella response.Read →

Piping, welding and fabrication

ElectropolishingElectropolishing stainless steel tube, fittings, tanks and vessels to ASME BPE SF4 to SF6 surface finishes.Read →Sanitary Process Piping (ASME BPE)Hygienic, orbital-welded stainless process piping built to ASME BPE and B31.3 — electropolished, passivated, and documented weld-by-weld for cGMP traceability.Read →Stainless Steel PipingStainless steel piping and fittings fabricated, welded and installed: 304 vs 316, pipe vs tubing, schedules, pressure ratings, passivation and cost drivers.Read →Industrial WeldingIndustrial welding services for plants and commercial facilities: field, turnaround, structural and pipe welding to AWS and ASME codes, in all 50 states.Read →Stainless Steel FabricationCustom stainless skids, frames, platforms, tanks and sanitary spools fabricated to drawing in 304L and 316L.Read →Structural Steel FabricationStructural steel fabrication and erection for plants: pipe racks, platforms, mezzanines, stairs and skid frames, designed, welded and set in all 50 states.Read →Pressure Vessel FabricationPressure vessel fabrication to ASME Section VIII: design inputs, materials, welding, NDE, hydrostatic test, nameplate, data reports, NBIC repair and cost.Read →Industrial PlumbingProcess water, trench drains, acid waste, backflow protection and emergency eyewash and shower systems for plants.Read →Medical Gas PipingMedical gas piping designed, installed, brazed, tested and maintained to NFPA 99: materials, sizing, color code, tests and verification through sign-off.Read →Pipe FabricationPipe fabrication in carbon steel and stainless: drawings, cutting, fit-up, welding, examination, testing and installation of fabricated piping to ASME codeRead →Steam PipingSteam piping and condensate systems designed, installed and repaired: sizing, materials, B31.1 vs B31.3 vs B31.9, drainage, expansion and insulation.Read →Mechanical InsulationMechanical insulation for plants and buildings: pipe insulation types, jacketing, code thickness, corrosion control and repair from Paul Industries.Read →Heat TracingHeat tracing for plant piping, tanks and instruments: electric and steam types, design inputs, controls, testing, and how Paul installs and services them.Read →Hot Tapping & Line StoppingTie-ins to live water, steam, chilled water, gas and process lines without draining or shutting down the system.Read →Hydrostatic TestingHydrostatic testing of process, utility and sanitary piping, vessels and tanks: test pressure by ASME code, procedure, water quality, pneumatic tests, records.Read →Compressed Air PipingCompressed air piping designed and installed for plants: loop layouts, drops and drains, sizing, aluminum vs steel vs copper, why PVC is unsafe, leaks.Read →Tank FabricationCustom tank fabrication in stainless and carbon steel: shop-built vs field erected, API 650 and ASME design, jackets, welding, hydro testing and installation.Read →Process Piping ContractorDesign, shop fabrication, orbital welding, field installation, and testing of ASME B31.3 / BPE process and high-purity piping.Read →Process Piping (overview)Broad overview of process piping for regulated manufacturing — materials, ASME B31.3 vs BPE, welding, fabrication, and install — routing to our specialized services.Read →

Cleanrooms, CIP and process systems

CleanroomsISO 14644-classified modular and stick-built cleanrooms with HEPA-filtered HVAC, controlled pressurization, and full commissioning for pharma, biotech, and cosmetic production.Read →CIP / SIP / COP SystemsAutomated clean-in-place, sterilize-in-place, and clean-out-of-place systems — skid design, installation, controls integration, and validation for repeatable cGMP cleaning.Read →Bioreactor InstallationSetting, rigging, and process tie-in of single-use and stainless bioreactors and fermenters, including utility connections, piping, and commissioning.Read →Process & Storage TanksRigging and installation of jacketed, agitated, and storage vessels with sanitary nozzles, mixers, and instrumentation tied into your process.Read →Autoclaves & SterilizersInstallation, utility hook-up, and validation of autoclaves, sterilizers, and washers — combining mechanical install and IQ/OQ/PQ in one scope.Read →Industrial Tank CleaningIndustrial tank cleaning for process, storage and water tanks: methods, OSHA confined space entry, waste, inspection and repair, in all 50 states.Read →Turnkey Process SystemsSingle-source engineering, procurement, construction, commissioning, and validation for complete process suites — the hub that ties every capability above together.Read →Pump SkidsPump skid design, fabrication, testing and installation: skid types, NPSH, base plates, piping layout, grouting and maintenance for process loops.Read →Validation & Commissioning (IQ/OQ/PQ)Commissioning and qualification with your installation or on systems already running, documented and proven by one team.Read →Cleanroom ContractorTurnkey cleanroom design-build for GMP manufacturing — ISO 5–8 envelope, HVAC/HEPA, process utilities, and IQ/OQ/PQ validation, nationwide.Read →Passivation ServicesShop and field passivation of stainless sanitary systems to ASTM A967/A380 — nitric or citric chemistry with verification and documentation.Read →

Repair, maintenance and shutdowns

Steam TrapsSteam trap types, selection and sizing, ultrasonic testing, plant-wide trap surveys, repair, replacement and monitoring.Read →Boiler InstallationCommercial and industrial steam and hot water boilers set, piped, started and inspected, from trim and stacks to the first jurisdictional inspection.Read →Boiler RepairBoiler repair for commercial and industrial plants: leaks, retubing, burners, controls, safety tests and same-day emergency response in all 50 states.Read →Hydro BlastingHydro blasting for tube bundles, tanks, pipes and steel: pressure ranges, nozzles, safety, waste water and cost drivers, and how Paul Industries does it.Read →Fire Pump MaintenanceFire pump maintenance, testing, repair and installation to NFPA 25 and NFPA 20: schedules, checklists, costs and records, in all 50 states.Read →Industrial Valve RepairIndustrial valve repair for gate, ball, check, control and relief valves: testing, rebuilds, packing, records, cost and replacement in all 50 states.Read →Gearbox RepairGearbox repair for plants: helical, bevel, worm, planetary and cooling tower reducers. Teardown, rebuild, alignment, startup and emergency service.Read →Air Compressor RepairAir compressor repair for rotary screw, reciprocating and centrifugal machines: troubleshooting, rebuilds, dryers, leaks, cost and same-day service.Read →Vacuum Pump RepairVacuum pump repair for rotary vane, liquid ring and dry pumps: symptoms, rebuild vs replacement, maintenance schedules and how Paul restores your vacuum.Read →Industrial Pump RepairIndustrial pump repair for plants: failure symptoms, centrifugal overhauls, seals, alignment, test criteria and maintenance, in the field or the shop.Read →Industrial Maintenance ServicesIndustrial maintenance services for process piping, steam, compressed air, chillers, cooling towers, water systems and tanks: types, contracts and KPIs.Read →

Electrical, controls and building trades

Standards referenced: ASME BPE · ASME B31.3 · ISO 14644-1 · ASTM A967 · ASME Boiler and Pressure Vessel Code · 21 CFR 211 · ASTM A380 · 3-A Sanitary Standards · EU GMP Annex 1 (EudraLex Vol. 4)

Frequently asked questions

What services does Paul Industries offer?

Paul Industries offers high-purity water systems, sanitary process piping, orbital welding, passivation, CIP/SIP, clean steam, cleanrooms, tanks and vessels, bioreactors, autoclaves, filtration, heat exchangers, turnkey process systems, validation (IQ/OQ/PQ), emergency repair, preventive maintenance, and shutdown/turnaround, all as one accountable single-source contractor. Call 201-450-8280.

Does Paul Industries only build systems, or also service them?

Both. We build complete systems and we service them. Most pharmaceutical process work is modification and maintenance of running plant rather than greenfield construction: tie-ins to existing loops, derouging campaigns, dead leg remediation, cleanroom recertification, CIP circuit additions and preventive programs. That work is a different discipline from new build, because the shutdown window governs and line clearing, hot work permitting and requalification routinely consume more of it than the physical work does.

What does single-source service mean?

Single-source means Paul runs design, fabrication, installation, and validation as one scope instead of splitting it across separate firms. One party is accountable for the outcome, so there is no gap between a designer, an installer, and a validator. It keeps engineering and documentation consistent. Call 201-450-8280.

What high-purity water services does Paul provide?

Design, fabrication, installation and qualification of USP Purified Water and Water for Injection systems: pretreatment, generation by distillation or membrane production, storage, distribution loops with points of use, and sanitization by hot circulation or ozone. Then the work that keeps them compliant, meaning three phase qualification sampling, passivation and derouging, dead leg remediation, and excursion investigation when a loop fails a microbial or endotoxin limit. We also handle clean steam generation, which sits downstream of the same Purified Water supply.

What sanitary piping services does Paul offer?

Routing design for drainability and cleanability, shop prefabrication of spools, orbital welding with procedures qualified to ASME Section IX against ASME BPE, borescope inspection, material traceability to mill heat numbers, pressure testing, passivation to ASTM A967, and the weld map and turnover package that makes all of it auditable. We work in 316L to ASME BPE where the fluid requires it and to ASME B31.3 where it does not, and in corrosion-resistant alloys or fluoropolymer-lined pipe for aggressive chemical service.

Does Paul Industries provide validation services?

Yes, and we spell out everything that covers, because the word is used loosely. Installation and operational qualification of the systems we build and of existing systems, executed against protocols your quality unit approves. Three phase sampling programs for water systems, including investigation of excursions found during execution. Cleaning validation with analytical method development and recovery studies from coupons of your actual contact surfaces. SIP lethality mapping and autoclave thermal mapping. What stays with you is protocol approval and product release, which cannot be delegated.

What cleanroom services does Paul offer?

Envelope and mechanical construction for classified and controlled environments, pressure cascade design across the whole suite rather than room by room, air balancing, and certification to ISO 14644 with recovery and envelope integrity testing. Then the services that penetrate the envelope, which is where cleanroom projects usually go wrong: process piping, water points of use, clean steam and CIP connections, each a classification and cascade risk. We also handle periodic reclassification, annually or twice yearly depending on class.

What CIP and SIP services does Paul provide?

Skid specification and supply, distribution routing and circuit design, tie-ins to vessels and process equipment, steam-in-place piping with the slope and trap placement that decides whether cycles pass, cycle development for each circuit, and cleaning validation protocols and execution. We also assess the question most often skipped, which is whether your existing water and steam capacity can meet peak CIP demand alongside normal process draw, since loops sized before CIP was contemplated frequently cannot.

Does Paul offer emergency repair?

Yes. Paul provides nationwide emergency repair for high-purity water, sanitary piping, CIP/SIP, and clean steam failures that threaten or halt production, with same-day response and the work documented for your quality system. For an urgent failure, call 201-450-8280.

What maintenance services does Paul provide?

Programs built around inspection and trending rather than reactive callouts. Annual borescope examination at named locations compared against commissioning baselines, with dissolved iron, conductivity and total organic carbon trended so rouging is caught before it is visible. Filter integrity testing on schedule. Steam trap surveys, since a failed trap is the usual cause of a SIP cold spot. Verification that sanitization reaches temperature at the far end of the loop rather than only at the skid. Valve diaphragm and seal replacement on defined intervals.

How do the services fit together as turnkey delivery?

Turnkey delivery means Paul takes a project from design through fabrication, installation, and validation as one accountable scope, so the water, piping, cleanrooms, and utilities are engineered to work together and handed over qualified. Single-source turnkey removes vendor interfaces. Call 201-450-8280.

What standards do Paul’s services meet?

ASME BPE for bioprocessing pipework and surface finish, ASME B31.3 for pressure piping design with its fluid service categories, ASME Section IX for welder and procedure qualification, ASTM A967 for passivation and ASTM A380 for cleaning and descaling, ISO 14644 for cleanrooms, EN 285 for clean steam quality, and the USP and European Pharmacopoeia monographs for compendial water. The governing quality framework is 21 CFR 211, with EU GMP Annex 1 for sterile manufacture supplied into Europe and 3-A Sanitary Standards for food processing.

Can Paul Industries deliver all these services nationwide?

Yes, all 50 states, at your plant for planned projects and same-day emergency response. We work nationwide with dates confirmed at quotation, and a large share of the work is prefabricated before crews start on site. That model suits planned projects, shutdowns, turnarounds and emergency repairs alike. For emergency attendance Paul Industries commits to reaching your plant the same day, and we confirm the arrival time at the first call so you can plan around it.

Which service do I need for my project?

It depends on your goal: a new system needs design through validation, a failure needs emergency repair, an aging system benefits from preventive maintenance, and consolidated offline work fits a shutdown/turnaround. Paul can advise which scope fits your situation. Call 201-450-8280.

How much do Paul’s services cost?

Cost depends on scope, capacity, materials, cleanroom classification, and validation depth, so services are quoted per project rather than by fixed price. Single-source delivery gives a clearer total because design, fabrication, installation, and validation are priced together. Call 201-450-8280 for a scoped quote.

How do I request a service or start a project?

Send what determines the design, and ask for a budget range from comparable scope if that is what you need first. For piping that means isometrics, the fluid and its service conditions, and the fluid service category and surface finish you believe apply. For water, the grade, daily and peak demand, point count and a feed water analysis. For cleanrooms, what will happen in the room and the shell constraints. In every case tell us your shutdown window and the documentation package you require, and whether supplier qualification is needed before award.

Which service comes first on a new facility project?

Engineering and process design, because the water system specification, cleanroom classification and piping standard determine almost everything downstream. Starting with equipment selection before the specification is settled is the most common source of rework.

What is the difference between process piping and sanitary process piping?

Process piping covers the mechanical systems that move fluids under ASME B31.3. Sanitary process piping adds product-contact requirements: surface finish, drainability, dead leg limits, orbital welding and full traceability, generally to ASME BPE. The pressure design rules still apply underneath.

Does Paul Industries fabricate skids or only install them?

Both. Skids are fabricated and then installed, which is the point of a single-source scope, because the party that built the skid is the party that ties it in and supports its qualification. That removes the gap where a supplied skid and a site installation meet.

What does validation and commissioning cover as a service?

Installation qualification, operational qualification and performance qualification execution for the systems delivered, along with the documentation that underpins them. It is scoped alongside the build so that the evidence is produced as the work proceeds rather than reconstructed afterwards.

When is an emergency repair service the right call?

When a failure has stopped production or put a system outside its validated state and the priority is a controlled, documented return to service. The difference from a general mechanical repair is that the repair itself has to leave behind evidence the quality organisation can accept.

What does a preventive maintenance service contract cover?

Scheduled inspection and servicing of the process systems, water loops, CIP circuits and cleanrooms, with the records kept in a form the site can use during an inspection. The value is usually in catching drift in water quality or pressure differentials before it becomes a deviation.

What is dead leg elimination and when is it needed?

It is targeted remedial work to remove or shorten branches where stagnant fluid sits, usually triggered by a microbial excursion, an audit observation or a remediation commitment. It combines survey, redesign of the affected branch, installation and requalification of the affected section.

What does an FDA 483 water system remediation involve?

Investigating what the observation actually points at, correcting the design or operational cause, and producing evidence the correction works. That frequently means dead leg removal, slope correction, passivation or derouging, and sampling to demonstrate recovery, all inside a documented response timeline.

How are these services scoped together on one project?

As a single accountable scope covering design, fabrication, installation, passivation and qualification, so that no interface between them is left to another party. That is the difference between buying services and buying an outcome.