Paul Industries designs, builds, installs, tests and services ultrapure water systems in Maryland for cell therapy and biotech sites on the I-270 corridor, federal and university research laboratories, semiconductor and photonics cleanrooms, and power and process plants, from Rockville and Gaithersburg to Frederick, Baltimore and College Park. With headquarters at 256 Shore Drive in Kilmarnock, Virginia, Paul Industries accepts ultrapure water projects throughout Maryland and the rest of the country. Maryland’s feedwater differs sharply from one supply to the next, and the treatment train is designed around that difference.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
WSSC Potomac feed Hardness 154 mg/L, alkalinity 83 mg/L (2025 yearly averages)
WSSC Patuxent feed Hardness 70 mg/L, alkalinity 38 mg/L (2025 yearly averages)
Baltimore supply Loch Raven, Liberty and Prettyboy reservoirs; Susquehanna for drought
Electric rate Maryland industrial average 10.01 cents/kWh in 2024; US 8.13 (EIA)
Reviewed November 2026

Where are ultrapure water systems in Maryland used?

Ultrapure water systems in Maryland serve four kinds of users: biotech and cell therapy manufacturers along the I-270 corridor and in Frederick County, federal research campuses such as NIH in Bethesda, NIST in Gaithersburg and the FDA’s White Oak campus in Silver Spring, university laboratories and nanofabrication cleanrooms in Baltimore and College Park, and process and power plants that need demineralized makeup water. Each user sets its own quality target, and the plant that meets one target can fall short of another.

The I-270 corridor gives the clearest picture of current demand. AstraZeneca’s $300 million cell therapy manufacturing facility in Rockville, an 84,264 square foot building at the Alexandria Center for Life Science at Shady Grove, was set up initially to make T-cell therapies for clinical trials, and Kite’s cell therapy manufacturing site sits on a 20-acre parcel in Urbana, Frederick County. Sites like these run Water for Injection and Purified Water systems for product contact, and they also run ultrapure loops for laboratories, analytical instruments, media preparation support and cleanroom services. Pharmaceutical water generation and distribution under USP is covered on high-purity water systems in Maryland; this page covers the ultrapure side.

Maryland ultrapure water users and the quality targets they work to
UserWhere in MarylandWhat the water doesTypical reference
Cell therapy and biotechRockville, Gaithersburg, Germantown, Frederick CountyLaboratory and analytical water, cleanroom support, feed to Purified Water and WFI generationUSP conductivity and TOC; site specifications for endotoxin and bacteria
Federal research campusesBethesda, Gaithersburg, Silver SpringReagent water for analytical chemistry, cell culture and metrologyASTM D1193 reagent water grades
University labs and nanofabricationBaltimore, College ParkWafer rinsing, wet benches, instrument feedSEMI F63 and ASTM D5127 for electronics-grade water
Semiconductor, photonics and defense electronicsBaltimore region, Montgomery CountyRinse and process water in cleanroomsSEMI F63 targets near 18.2 megohm-cm and low-ppb TOC
Power and campus plantsStatewideDemineralized makeup for high-pressure boilers and steam cyclesPlant and boiler manufacturer limits on silica and conductivity

What is ultrapure water used for in a Maryland cell therapy site?

Ultrapure water in a Maryland cell therapy site is used for laboratory and quality control testing, analytical instruments, glassware and parts final rinses, cleanroom support services, and as the feed that downstream Purified Water and Water for Injection generators polish further. Cell therapy processes often run on single-use equipment with purchased media, which shrinks the volume of product-contact water, but the laboratories and support services around them still draw steadily all day.

That pattern shapes the design. Demand is moderate and spread across many points, often in several buildings on a leased life science campus, so a central treatment plant feeding a recirculating loop with point-of-use polishers usually beats a scatter of benchtop units. Microbial control carries as much weight as resistivity, because endotoxin and bacteria matter to cell culture while trace metals rarely do. Paul Industries designs the loop for continuous circulation, sanitization without opening the system, and sample points at the places quality teams actually test, and installs it in buildings that remain in use, coordinating with the cleanroom work described on cleanrooms in Maryland.

How does Maryland feedwater change the treatment train?

Maryland feedwater changes the treatment train because the state’s main public supplies differ in hardness, alkalinity and chloride, and in some cases a single county draws on two very different rivers. The front end of an ultrapure water system, softening or antiscalant, carbon or bisulfite for disinfectant removal, and the reverse osmosis recovery the plant can reach, is sized from the feedwater a site will actually receive.

WSSC Water, which serves most of Montgomery and Prince George’s counties, runs two filtration plants. Its 2025 tap water analysis shows the Potomac plant averaging 154 milligrams per liter of hardness, 83 of alkalinity, 51 of chloride and 22 of sodium, against 70, 38, 43 and 16 at the Patuxent plant. Residual chlorine averaged 2.0 milligrams per liter from the Potomac plant and 1.3 from the Patuxent plant. A reverse osmosis train designed only for the softer Patuxent water can scale at high recovery when the harder Potomac supply reaches it, so Paul Industries designs Montgomery and Prince George’s systems for the harder case and confirms which plant feeds the site with samples taken at the building.

Baltimore City’s supply comes from Loch Raven and Liberty reservoirs, with Prettyboy Reservoir resupplying Loch Raven, treated at the Montebello and Ashburton filtration plants and delivered to the city and parts of five surrounding counties. The Susquehanna River serves as an emergency source in severe drought, and river water differs from reservoir water in hardness, organics and temperature, so a Baltimore-area plant is checked for what a switch would do to its pretreatment and RO performance. Sites on wells, common on the Eastern Shore and in Southern Maryland, need a full groundwater analysis including iron, manganese, silica and hardness before the train is fixed.

Maryland feedwater and its effect on ultrapure water pretreatment
SupplyKey figuresPretreatment concernDesign response
WSSC Water, Potomac plantHardness 154 mg/L, alkalinity 83, chloride 51 (2025 averages)Calcium carbonate scaling on RO; higher chloride load on EDISoftening or antiscalant sized for this feed; recovery set conservatively
WSSC Water, Patuxent plantHardness 70 mg/L, alkalinity 38, chloride 43 (2025 averages)Lower scaling risk; same disinfectant removal needsHigher RO recovery possible if the site never sees Potomac water
Baltimore City systemLoch Raven, Liberty and Prettyboy reservoirs; Susquehanna in droughtSeasonal organics and temperature; change of character during a source switchCarbon and RO sized with margin; online TOC and conductivity on the feed
Wells, Eastern Shore and Southern MarylandSite specificIron, manganese, silica and hardnessOxidation and filtration ahead of softening; silica-limited RO recovery

Winter adds one more variable. WSSC Water has convened a Salt Summit on road salt reaching its source water, and winter runoff can raise chloride and sodium in river supplies, which raises the ionic load on reverse osmosis and electrodeionization. Paul Industries trends feed conductivity through the year and sizes EDI and polishing resin with that seasonal margin.

Ultrapure water system design for Maryland sites

Ultrapure water system design for a Maryland site starts from three inputs: the feedwater analysis, the quality the most demanding user needs at its point of use, and the demand profile across the day and the week. From those, the train usually runs from multimedia or cartridge filtration through softening or antiscalant, carbon or sodium bisulfite to remove the disinfectant, double-pass reverse osmosis, continuous electrodeionization and storage, then into an ultrapure water polishing system of 185 nanometer ultraviolet for organics, polishing ion exchange and final ultrafiltration or submicron filtration on the recirculating loop.

Stages of an ultrapure water system on Maryland feedwater
StagePurposeMaryland design note
FiltrationRemoves particles and turbidityWells may need iron and manganese removal first
Softening or antiscalantProtects RO membranes from scaleSized for the harder Potomac case in WSSC territory
Carbon or bisulfiteRemoves residual disinfectant that damages membranesDose and contact time set from measured residual at the building
Double-pass RORemoves most dissolved solids, organics and bacteriaRecovery limited by hardness and silica in the feed
ElectrodeionizationPolishes ions continuously without chemical regenerationMargin for winter chloride and sodium rises
Storage and nitrogen blanketBuffers demand, limits carbon dioxide pickupVessel sizing set by lab and production peaks
UV, polishing resin and final filtrationReduces TOC, removes trace ions and particlesMatches the point-of-use target for each user group
Recirculating loopDelivers water at constant quality to every pointVelocity and return temperature held for microbial control

Loop material follows the user. Semiconductor and analytical loops usually run in PVDF or other high-purity polymers welded to avoid crevices, while pharmaceutical and biotech loops that need hot or chemical sanitization often run in electropolished 316L stainless steel to ASME BPE, joined by orbital welding and passivated before use. Stainless loops in Maryland facilities are installed and documented with the practices described on sanitary process piping in Maryland and passivation services in Maryland.

Laboratory ultrapure water system or a central plant?

A laboratory ultrapure water system at each bench suits a single lab with modest demand, while a central plant feeding a building loop suits research buildings, cores and campuses where dozens of labs draw water through the day. Maryland’s federal and university research buildings, with many labs under one roof, usually reach the point where a central reverse osmosis and EDI plant feeding point-of-use polishers costs less to run and maintain than a fleet of independent units.

The central approach also gives one place to monitor ultrapure water quality: conductivity, TOC and bacteria trended at the plant and at the loop return, with alarms that reach facilities staff before a researcher notices a problem. Point-of-use polishers then bring the water to the grade each lab needs, from ASTM D1193 reagent water for general chemistry to very low TOC water for trace analysis. Paul Industries designs the central plant, the loop and the point-of-use connections together, so each lab’s polisher receives water it can finish rather than water it struggles with.

Ultrapure water production for fabs, photonics and nanofabrication

Ultrapure water production for semiconductor, photonics and nanofabrication work in Maryland aims at the electronics-grade targets in SEMI F63 and ASTM D5127, with resistivity at or near the 18.2 megohm-cm theoretical limit at 25 degrees Celsius and TOC in the low parts per billion. Maryland’s fabrication cleanrooms are mostly research and specialty facilities, such as university nanofabrication centers and photonics and defense electronics labs around Baltimore and Montgomery County, rather than high-volume commercial fabs, so flows are smaller but the quality target is the same.

At research scale the hard part is holding quality at low and variable flow. A wet bench may draw heavily for an hour and then sit idle, so the loop has to keep moving at velocity, the UV and polishing stages need constant flow to perform, and dissolved oxygen and particle counts have to be monitored at the points that matter. Paul Industries builds these loops with zero-dead-leg tool connections, online particle and TOC monitoring where the target calls for it, and tie-in points for future tools, so a new tool connects without draining the system. The New York page covers large-fab scale for comparison: ultrapure water systems in New York.

How are Maryland ultrapure loops kept free of bacteria?

Maryland ultrapure loops are kept free of bacteria by design first and sanitization second: water that never stops moving, a loop with no dead legs, ultraviolet treatment and submicron or ultrafiltration on the supply, and a sanitization method chosen when the loop material is chosen. Bacteria that settle in a stagnant branch form biofilm, and biofilm sheds organics and endotoxin into water that otherwise tests at full resistivity.

Velocity is the first defense. Paul Industries sizes loop pumps and pipe so the return leg keeps turbulent flow even when every point of use is open, and fits a back-pressure valve at the return so pressure stays positive at the far end of the building. Points of use connect with zero-static or short-branch valves, and future tool or lab connections are capped close to the main run rather than left as long empty branches.

Sanitization follows the material. Stainless loops at cell therapy and biotech sites take hot water at 80 degrees Celsius or more, or clean steam where the design allows, while polymer loops in labs and fabs use ozone, hydrogen peroxide or peracetic acid at concentrations the material tolerates, followed by a rinse until conductivity and TOC return to baseline. Paul Industries writes the sanitization procedure with the system, sets its frequency from bacteria trends rather than the calendar alone, and records each sanitization so a quality reviewer can match results to events.

What a Maryland ultrapure water system measures, where and why
ParameterWhere it is measuredWhy it matters
Resistivity or conductivityAfter EDI, after polishing, loop returnFirst sign of resin exhaustion or a membrane breach
Total organic carbonLoop supply and return; feed in Baltimore-area plantsTracks UV performance and organics in the feed
Bacteria and endotoxinSample valves at points of use and the returnShows biofilm before it reaches cell culture or product
ParticlesAfter final filtration on electronics loopsProtects wafer and photonics processes
Dissolved oxygenLoop supply for oxidation-sensitive processesControls surface oxidation on silicon and metals
Feed conductivity and residual chlorineAhead of carbon and ROCatches seasonal salt and disinfectant changes in WSSC and Baltimore water
Flow, pressure and temperatureLoop return and pump dischargeConfirms velocity and positive pressure at the far end

Every instrument feeds a trend, and the trends are what make the data useful. Paul Industries ties analyzers to the building management or plant control system with alarm limits set below the action limits, so facilities staff see a slow drift in resistivity or TOC days before a user sees a failed result, and the records needed for an audit or an investigation are already stored.

Demineralized water for Maryland power and campus plants

Demineralized water for Maryland power and campus plants is a close relative of ultrapure water: high-pressure boilers, steam turbines and some cogeneration plants need makeup water with very low conductivity and silica, because silica carried with steam deposits on turbine blades and dissolved solids concentrate in the boiler. University and hospital central plants that run high-pressure steam, and industrial plants with their own power generation, use reverse osmosis followed by electrodeionization or mixed-bed ion exchange to make it.

The treatment train looks like the front half of a laboratory ultrapure plant, with the polishing focused on silica and sodium rather than TOC and bacteria. Paul Industries designs and installs these makeup systems with silica and conductivity monitoring at the outlet, sizes storage to cover boiler blowdown and startup demand, and ties the system to the boiler controls so the drum receives only water inside its silica and conductivity limits. The heating side of the plant is served alongside it through the same contract.

Expanding an ultrapure water system in an operating Maryland building

Expanding an ultrapure water system in an operating Maryland building means adding capacity or new loop branches while the existing users keep drawing water, which calls for hot taps or brief planned shutdowns, temporary supply where the outage would stop work, and sanitization and qualification of the new section before it joins the loop. Life science buildings on leased campuses add landlord rules on shutdowns, roof penetrations and shared utility rooms.

Paul Industries prefabricates loop sections and skids off site, installs isolation valves at tie-in points during short planned outages, flushes and sanitizes the new section separately, and tests it for conductivity, TOC and bacteria before opening it to the main loop. For regulated sites, the change is documented and qualified with the approach described on validation and commissioning in Maryland, and wider piping changes follow process piping in Maryland. Storage vessels and heat exchangers in the plant usually fall outside Maryland’s pressure vessel inspection program when they operate at 15 psig or less, or hold water within 300 psig and 210 degrees Fahrenheit, but pressurized media and carbon vessels above those limits are checked against the state rules before installation.

Who installs ultrapure water systems in Maryland?

Paul Industries installs ultrapure water systems in Maryland, taking work in Rockville, Gaithersburg, Germantown and Bethesda, in Frederick and Urbana, in Baltimore, Columbia and Howard County, in College Park and Prince George’s County, around Aberdeen and Harford County, in Annapolis, Salisbury and the Eastern Shore, and in Southern Maryland. Headquartered in Kilmarnock, Virginia, Paul Industries is an East Coast contractor that also takes ultrapure water work in all 50 states.

The full treatment train and loop are designed, fabricated, supplied, installed, tested, started up, serviced, repaired and maintained by Paul Industries, under supply-only, design-build or complete installation contracts. The national overview of ultrapure water is on ultrapure water systems, filtration stages on high-purity water filtration, and the headquarters-state page on ultrapure water systems in Virginia.

What does an ultrapure water system cost in Maryland?

The cost of an ultrapure water system in Maryland is set by the flow rate and quality target, the feedwater, the number of passes and polishing stages, loop length and material, the number of points of use, monitoring instruments, sanitization method, and the work needed to install in an occupied building. A small laboratory plant and a fab-grade loop with online particle and TOC analyzers sit far apart, and the loop and its connections often cost as much as the treatment train.

Ultrapure water cost also continues after startup. Membranes, resin, UV lamps and filters are replaced on schedules set by feed quality, and pumps run around the clock to keep the loop moving. As an illustration, 30 kilowatts of continuous pump and UV load uses 262,800 kilowatt-hours a year, or about $26,300 at Maryland’s 2024 average industrial electricity price of 10.01 cents per kilowatt-hour (EIA). Paul Industries gives a budget range from comparable systems once flow, quality and loop layout are known, and a firm price after the feedwater analysis and site survey.

The route chosen also moves the number. Supply-only suits a site that wants a skid-mounted treatment train delivered, tested and ready to connect; design-build suits a research building or cell therapy suite where the loop, points of use and monitoring must be designed around the space; and complete installation covers everything from pretreatment to the last point-of-use valve, with startup, sanitization and test records. Paul Industries prices each route on the same scope sheet, so an owner can compare them line by line.

Ultrapure water from Paul Industries in Maryland

Paul Industries builds and services ultrapure water systems for Maryland biotech and cell therapy sites, federal and university laboratories, fabrication cleanrooms and plants, from feedwater analysis and design through installation, sanitization, testing and service. Send the required quality at point of use, the flow and number of points, the building’s water supply or a recent feedwater analysis, and drawings of the space. Call 201-450-8280 or request a quote. Other water, piping and process services offered statewide are listed under Maryland.

Standards referenced: SEMI F63 · ASTM D5127 · ASTM D1193 · USP <645> Water Conductivity · USP <643> Total Organic Carbon · USP <1231> Water for Pharmaceutical Purposes · ASME BPE · ISPE Baseline Guide: Water and Steam Systems · Maryland Boiler and Pressure Vessel Safety Act (Public Safety Article, Title 12, Subtitle 9)

Frequently asked questions

Which contractor builds ultrapure water systems for biotech sites in Rockville, Gaithersburg and Germantown?

Paul Industries builds ultrapure water systems for biotech and cell therapy sites in Rockville, Gaithersburg and Germantown on the I-270 corridor. Most of these buildings sit in WSSC Water territory, so Paul Industries designs pretreatment for the harder Potomac supply and confirms the feed with samples at the building. Loops are built for continuous circulation, sanitization without opening the system and sampling where quality teams test.

Does Paul Industries install ultrapure water systems at Baltimore research buildings and plants?

Paul Industries installs ultrapure water systems in Baltimore City, Baltimore County, Columbia and Howard County, including research buildings, university laboratories and manufacturers on the Baltimore City water system. Pretreatment there is sized with margin for seasonal changes in reservoir water and for a possible switch to the Susquehanna River during severe drought. Send the building’s recent water analysis and the point-of-use quality to start.

Who builds ultrapure water systems in Frederick, Urbana and the rest of Frederick County?

Paul Industries builds ultrapure water systems in Frederick, Urbana and across Frederick County, where cell therapy manufacturing and biologics operations sit alongside the county’s growing data center campus. Each design starts from a site feedwater analysis, because supplies in the county vary by source, and includes the loop, polishing, monitoring and qualification records a regulated site needs.

Does Paul Industries take ultrapure water work in College Park, Annapolis and Southern Maryland?

Yes. Paul Industries takes ultrapure water work in College Park and Prince George’s County, in Annapolis and Anne Arundel County, and in Southern Maryland, for university laboratories, nanofabrication cleanrooms, government buildings and plants. Sites on wells in Southern Maryland need iron, manganese and silica tested before the train is fixed, while College Park sites on WSSC supply are designed for the harder Potomac feed.

Why does a Montgomery County site need to know which WSSC plant feeds it?

WSSC Water’s 2025 averages show hardness of 154 milligrams per liter from the Potomac plant against 70 from the Patuxent plant, with alkalinity of 83 against 38. A reverse osmosis train tuned for the softer water can scale at high recovery when harder water arrives. Designing for the Potomac case, or confirming with repeated building samples, protects membranes and sets realistic recovery.

Does chlorine in Maryland tap water affect an ultrapure water plant?

Residual disinfectant damages polyamide RO membranes, so every Maryland ultrapure plant on municipal water removes it ahead of the membranes. WSSC Water’s 2025 report shows residual chlorine averaging 2.0 milligrams per liter from its Potomac plant and 1.3 from its Patuxent plant. Carbon contact time or bisulfite dose is set from the residual measured at the building, with an oxidation-reduction or chlorine monitor protecting the RO.

What happens to a Baltimore ultrapure plant if the city switches to Susquehanna River water?

Baltimore uses the Susquehanna River as an emergency source in severe drought, and river water can differ from reservoir water in hardness, organics and temperature. A plant designed with margin in softening, carbon and RO handles the change; one running at its limits may scale membranes or lose TOC performance. Paul Industries reviews the pretreatment against a source switch and adds online feed monitoring where it is missing.

What is the ultrapure water quality target for a Maryland university nanofabrication lab?

Electronics-grade work follows SEMI F63 and ASTM D5127, with resistivity at or near 18.2 megohm-cm at 25 degrees Celsius and TOC in the low parts per billion, plus particle, dissolved oxygen and metals limits set by the processes in use. Research labs often run lower flows than commercial fabs, so the loop design focuses on holding those targets at low and variable draw.

What sets an ultrapure water system price in Maryland?

An ultrapure water system price in Maryland depends on flow and quality target, feedwater chemistry, the number of RO passes and polishing stages, loop length and material, points of use, online instruments, sanitization method and installation conditions in the building. Paul Industries gives a budget range from comparable systems early, then a firm price after the feedwater analysis and site survey.

Can a lab building in Bethesda or Silver Spring replace benchtop units with a central ultrapure plant?

Yes, and many multi-lab buildings save on consumables and maintenance by doing so. A central RO and EDI plant feeds a recirculating loop, and point-of-use polishers at each lab finish the water to the grade it needs. Paul Industries sizes the plant from current and expected lab demand, routes the loop through existing ceilings and risers, and phases the changeover lab by lab.

How is a new loop branch qualified before it joins a running Maryland system?

The branch is installed behind isolation valves set during a short planned outage, then flushed, sanitized and tested on its own for conductivity, TOC and bacteria before the valves open to the main loop. Regulated sites add a change record, test protocol and summary report. Paul Industries plans the tie-in so the existing users lose water for the shortest possible window.

Which loop material should a Maryland cell therapy site choose?

Cell therapy and biotech sites that sanitize with hot water or chemicals usually choose electropolished 316L stainless steel to ASME BPE, orbital welded and passivated, because it tolerates heat and repeated sanitization. Laboratory and electronics loops often use PVDF, which leaches very little and suits ozone or chemical sanitization. Paul Industries matches the material to the sanitization plan and the most demanding user.

Does road salt affect Maryland ultrapure water systems in winter?

Winter runoff can raise chloride and sodium in river supplies, and WSSC Water has held a Salt Summit on road salt reaching its source water. Higher ionic load means more work for reverse osmosis and electrodeionization and faster exhaustion of polishing resin. Paul Industries trends feed conductivity across the year and sizes EDI and resin with winter margin.

Can an ultrapure water system serve both laboratories and a Purified Water generator in Maryland?

One pretreatment and RO train can feed both an ultrapure laboratory loop and a USP Purified Water or WFI generator, which saves space and equipment at life science sites. The pharmaceutical branch needs its own qualified generation, storage and distribution under USP, and the shared front end is documented as part of that system. Paul Industries designs the split so each branch meets its own target.

What does an ultrapure water service contract cover in Maryland?

An ultrapure water service contract covers scheduled replacement of membranes, resin, UV lamps and filters, instrument calibration, sanitization, review of conductivity, TOC and bacteria trends, and repairs to pumps, valves and controls. Paul Industries sets intervals from the site’s feedwater and demand, so consumables are changed on evidence and the loop stays at quality between visits.

How long does it take to build an ultrapure water system for a Maryland lab building?

Timing depends on equipment lead times, loop length, building access and the qualification the site needs. Skid-mounted treatment trains are often fabricated while loop piping is installed, and testing and sanitization follow mechanical completion. Paul Industries sets the schedule after the design review and site survey, with tie-ins planned around the building’s research or production calendar.

What should a Maryland site send to get an ultrapure water system quoted?

Send the quality target at each point of use, flow and peak demand, number and location of points, a recent feedwater analysis or the name of the water supplier, drawings of the plant space and loop route, and any qualification requirements. Paul Industries returns a budget range from comparable systems, then a firm price once the feedwater and site conditions are confirmed.

Planning an ultrapure water system in Maryland?

Send the point-of-use quality, flow, number of points and a recent feedwater analysis. Call 201-450-8280 or request a quote.