Paul Industries is a Southwest process equipment contractor that designs, fabricates, installs, commissions and services process piping, water systems, pressure vessels and plant utilities for semiconductor fabs, refineries, data centers and manufacturers in Texas, Oklahoma, New Mexico, Arizona, Nevada, Utah and Colorado. The East Coast contractor keeps its headquarters at 256 Shore Drive in Kilmarnock, Virginia, and was formerly based in northern New Jersey, then Pennsylvania. Southwest owners buy engineering, fabrication, installation and service from it under one contract. Call 201-450-8280 or request a quote.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Southwest states Texas, Oklahoma, New Mexico, Arizona, Nevada, Utah, Colorado
Industrial power 5.43 cents/kWh (NM) to 8.64 (NV); US average 8.13 (EIA, 2024)
Texas refining 34 refineries, about 6.13 million barrels a day, 33.8 percent of US capacity (EIA, January 2026)
Arizona chips TSMC's planned north Phoenix investment now $265 billion
Reviewed November 2026

Why a Southwest process equipment contractor designs around water, heat and altitude

A Southwest process equipment contractor designs around three conditions that set the region apart: scarce water, desert heat and, across much of Colorado, Utah, New Mexico and northern Arizona, high elevation. Every fab, refinery, data center or food plant in these seven states has to make its water go further, reject heat into very hot and dry air, and size pumps, boilers and vessels for thinner air.

Paul Industries carries that work from first layout to long-term service. It engineers process and utility systems, prefabricates skids, spools, tanks and ASME vessels off site, sets and connects them in the field, pressure tests and commissions them, and keeps servicing them after startup. Buyers choose supply-only delivery of documented equipment, design-build from a performance target, or complete installation through turnover.

The seven Southwest states and the plants that buy process systems

The seven Southwest states range from the largest refining base in the country to fast-growing chip, data center and mining regions, and four of them priced industrial power below the 2024 US average. Below, each state appears with the plant types behind most of its process spending, the average price its industrial customers paid for electricity in 2024 according to EIA, and a link to its Paul Industries page.

Process industries and 2024 industrial power prices in the seven Southwest states
StatePlants that drive process workAverage industrial price, cents/kWh, 2024Paul Industries page
TexasRefining and petrochemicals, semiconductor fabs in Sherman and Taylor, LNG, food, data centers6.12Texas refining, chip and food plants
OklahomaFive refineries, oil and gas processing, data centers, food5.84Oklahoma refining and gas processing
New MexicoPermian oil and gas, an advanced packaging fab in Rio Rancho, a refinery, dairy and food5.43New Mexico oil field and packaging plants
ArizonaSemiconductor fabs in north Phoenix and Chandler, chip packaging, copper mining, data centers, food7.90Arizona fab and water reuse work
NevadaData centers and battery production at the Tahoe-Reno Industrial Center, gold and lithium mining8.64Nevada data center and mining systems
UtahDietary supplements, five refineries, food, data centers7.86Utah supplement and refinery projects
ColoradoBiomanufacturing on the Front Range, brewing, food, two refineries8.62Colorado biotech and brewing plants

New Mexico’s 5.43 cents per kilowatt-hour and Nevada’s 8.64 frame the spread. A 1 MW load running 8,760 hours costs about $475,668 a year in New Mexico and $756,864 in Nevada, against $712,188 at the US average, so energy recovery pays back faster in Nevada and Colorado than in Oklahoma or New Mexico.

Where Southwest manufacturing and energy plants concentrate

Southwest manufacturing and energy plants concentrate in five clusters: semiconductors in Arizona and Texas, refining and gas processing from the Texas Gulf Coast through the Permian and Oklahoma, data centers and mining in Nevada, supplements and food in Utah, and biomanufacturing and brewing in Colorado. Every company and site named in this section appears as a public market fact, to show where process demand is building.

Semiconductor companies in Arizona

Semiconductor companies in Arizona are adding wafer and packaging capacity at a scale few states have seen. TSMC raised its planned investment in north Phoenix to $265 billion in July 2026; its first fab is in production and the second is targeted for 2027. Intel’s Ocotillo campus in Chandler runs Fab 52 on its 18A process, and Amkor broke ground in Peoria in October 2025 on an advanced packaging campus targeted to start production in early 2028. Semiconductor manufacturing in Arizona also draws chemical, gas and equipment suppliers who build their own plants around the fabs.

Semiconductor plants in Arizona are water and utility plants as much as they are clean rooms. Each fab needs ultrapure water carried through distribution components that meet SEMI F57, high-purity chemical and gas distribution, process cooling water, exhaust abatement and large wastewater and reclaim systems. TSMC broke ground in 2025 on an industrial water reclamation plant for its Phoenix site, and every supplier around it faces the same pressure to recycle.

Semiconductor companies in Texas

Semiconductor companies in Texas are adding capacity north and east of Austin and north of Dallas. Texas Instruments started production at its first Sherman fab, SM1, on December 17, 2025, and Samsung’s Taylor fab has entered trial production with volume output targeted for 2027. Those fabs buy the same ultrapure water, chemical distribution and cooling systems as Arizona’s, with Texas heat and humidity on the cooling side.

Refineries in Texas and Oklahoma

Refineries in Texas made up 33.8 percent of US crude distillation capacity on January 1, 2026, according to EIA: 34 operable plants with about 6.13 million barrels a day. Most stand on the Gulf Coast, and the rest serve inland markets from the Panhandle, West Texas and El Paso. Oil refineries in Oklahoma add five plants and about 543,800 barrels a day, Utah has five refineries around Salt Lake City, Colorado two and New Mexico one.

Oil refineries in Texas and across the region rely on process piping to ASME B31.3, pressure vessels and columns, shell and tube exchangers, fired heaters, storage tanks and steam systems, and most of that equipment can be opened only in a planned turnaround. New Mexico, the second largest crude-producing state with about 15 percent of US output in 2024, and the Permian side of West Texas add gas processing plants, compressor stations and produced water handling.

Data centers in Nevada and across the desert

Data centers in Nevada cluster at the Tahoe-Reno Industrial Center in Storey County, home to Switch’s Citadel campus, Google facilities and Tesla’s Gigafactory Nevada, where Vantage announced a campus of about $3 billion in 2025. Phoenix, Dallas and the Front Range host further campuses. Desert data centers face the hardest cooling trade in the industry: evaporative cooling saves power but uses water, while dry and adiabatic coolers save water but need more fan energy and larger heat exchangers.

Nevada also mines about two-thirds of US gold, and Thacker Pass in Humboldt County is under construction toward lithium carbonate production in late 2027. Mills, leach circuits and lithium plants need slurry and process piping, tanks, thickeners, reagent systems and steam.

Supplement manufacturers in Utah

Supplement manufacturers in Utah make up a large nutraceutical cluster, and the industry itself puts its Utah output at about $16 billion a year. Those plants run blending, granulation, encapsulation and liquid lines under FDA’s dietary supplement cGMP rule, and they buy purified water, sanitary piping, dust collection, compressed air treated for product contact and HVAC that holds humidity steady for capsules and tablets.

Biotech companies in Colorado and the Front Range brewing base

Biotech companies in Colorado cluster along the Front Range from Boulder to Aurora’s Anschutz Medical Campus, and Agilent is building a $725 million nucleic acid therapeutics plant in Frederick. Molson Coors runs one of the largest single-site breweries in the world in Golden. Both sectors buy sanitary process piping, CIP, glycol cooling and steam, and at Denver’s altitude of 5,280 feet atmospheric pressure is about 12 psia, so water boils near 202 F, which changes sterilizer cycles, pump suction margins and vent sizing.

Southwest industry clusters and the systems Paul Industries builds for them
ClusterWhereProcess systems
Semiconductor fabs and packagingNorth Phoenix, Chandler and Peoria, AZ; Sherman and Taylor, TX; Rio Rancho, NMUltrapure water, chemical and gas distribution, process cooling water, wastewater reclaim, exhaust abatement
RefiningTexas, Oklahoma, Utah, Colorado, New MexicoASME B31.3 piping, exchangers, pressure vessels, tanks, steam, turnaround repairs
Oil and gas processingPermian Basin of Texas and New Mexico, OklahomaGas plant piping, separators, compressor station piping, produced water treatment
Data centersStorey County, NV; Phoenix; Dallas; the Front RangeChiller plants, dry and adiabatic coolers, cooling towers, liquid cooling distribution
Mining and lithiumNorthern Nevada, ArizonaSlurry and process piping, tanks, reagent systems, steam and water treatment
Supplements and foodUtah, Texas, Colorado, ArizonaPurified water, sanitary piping, CIP, dust collection, compressed air
Biomanufacturing and brewingBoulder, Aurora, Frederick and Golden, COClean utilities, BPE tubing, CIP, glycol cooling, steam and condensate

How do boiler, tank and building rules compare across the Southwest?

Boiler, tank and building rules across the Southwest are set state by state, and the differences shape permits and inspection schedules from the first design review. Oklahoma inspects even low-pressure boilers every year, Nevada inspects unfired pressure vessels every four years, and Texas and Arizona leave commercial building codes to their cities while Oklahoma, New Mexico and Utah enforce state codes. Every Southwest drawing set Paul Industries issues names the boiler, tank and building rules for that exact site, and the turnover records follow the same list.

Boiler law, building code and storage tank rules in the seven Southwest states
StateBoilers and pressure vesselsCommercial building codePetroleum tanks
TexasHealth and Safety Code Chapter 755, Texas Department of Licensing and Regulation; certificate inspections every 12, 24 or 36 months by boiler typeNo statewide commercial code; Texas LGC 214.216 makes the IBC as it stood on May 1, 2012 the municipal commercial code, with city amendmentsTCEQ, 30 TAC Chapter 334; aboveground tanks over 1,100 gallons holding motor fuel are registered
OklahomaOAC 380:25, Oklahoma Department of Labor; power and low-pressure boilers yearly, pressure vessels externally every 3 yearsOklahoma Uniform Building Code Commission, 2024 IBC effective September 14, 2026Corporation Commission, Petroleum Storage Tank Division, OAC 165:25 and 165:26
New Mexico14.9.4 NMAC, Construction Industries Division; high-pressure boilers yearly, low-pressure every 24 months2021 New Mexico Commercial Building Code (14.7.2 NMAC), effective July 14, 2023Environment Department, Petroleum Storage Tank Bureau, 20.5 NMAC for underground and aboveground tanks
ArizonaA.R.S. Title 23, Chapter 2, Article 8 and A.A.C. R20-5-401 et seq., ADOSH Boiler Safety Section; power boilers every 12 months, low-pressure steam every 24Set by each city or countyADEQ, A.A.C. Title 18, Chapter 12, for underground tanks
NevadaNRS and NAC 455C, Division of Industrial Relations, Mechanical Compliance Section; power boilers internally each year with an external about six months later, unfired vessels every 4 yearsSet by each city or countyNDEP, NAC 459.9921 et seq., for underground tanks
UtahUtah Code Title 34A, Chapter 7 and R616-2, Utah Labor Commission; most pressure vessels every 48 monthsUtah State Construction Code (Title 15A), on the 2021 IBC since July 1, 2025DEQ Division of Environmental Response and Remediation, R311, plus rules for certain aboveground petroleum tanks since 2021
Colorado7 CCR 1101-5, Division of Oil and Public Safety; power boilers yearly, low-pressure boilers every 2 yearsSet by each city or county, with a 2021 IECC minimum whenever a jurisdiction updates its codesDivision of Oil and Public Safety, 7 CCR 1101-14, for underground and aboveground tanks

Two rows change plans the most. A Texas plant outside city limits has no municipal building code to follow, so Paul Industries agrees the design basis with the owner and its insurer before drawings start. A Colorado or New Mexico tank farm is permitted under a single petroleum tank rule that covers both underground and aboveground tanks, so secondary containment, overfill and leak detection for the whole farm go through one agency.

Who builds process systems in the Southwest?

Paul Industries builds process systems in the Southwest for semiconductor, refining, gas processing, data center, mining, supplement, biotech, brewing and food plants in all seven states. It is an East Coast contractor headquartered in Kilmarnock, Virginia, and one contract carries the engineering, fabrication, equipment supply, installation, testing, startup, service and repair for every Southwest site.

Owners with operations in several states gain the most. A chip supplier with plants in Chandler and Sherman, or a refiner with sites in Oklahoma and Utah, works with one project team, one weld procedure qualification set and one records package, while each state’s boiler, building and tank requirements are written into the scope for its own site.

Southwest services Paul Industries delivers, with the page for each

Southwest services Paul Industries delivers center on water, cooling, piping and pressure equipment. The scopes Southwest plants ask for most often are:

Designing process cooling for desert heat

Process cooling for desert heat is designed around very high dry-bulb temperatures paired with low wet-bulb temperatures. ASHRAE’s design data put Phoenix’s 0.4 percent cooling condition at about 110 F dry bulb with a mean coincident wet bulb near 70 F, a gap of about 40 degrees that makes evaporative cooling unusually effective and air-cooled equipment unusually stressed.

Paul Industries weighs that trade for each plant. Cooling towers give the lowest condenser water temperatures and the best chiller efficiency, but they consume water and concentrate dissolved solids that need treatment and blowdown. Dry coolers and air-cooled chillers save water but lose capacity on the hottest afternoons, so they need larger coils, derated compressors or adiabatic precooling. Hybrid systems run dry for most of the year and add evaporation only at peak, and Paul Industries sizes pumps, piping and controls so the switchover holds process temperatures steady.

Outdoor equipment in the desert also needs sun and dust protection. Insulation jackets resist ultraviolet light, electrical enclosures are shaded or cooled, intake filters on coolers and compressors are sized for dust storms, and plastic piping is kept out of direct sun or rated for it.

Working inside refineries and fabs that keep running

Refineries and fabs in the Southwest keep producing while most project work goes on around them, so access, permits and isolation planning matter as much as the equipment. In a refinery, hot work permits, gas testing, blinding lists and unit isolation sequences set the pace, and Paul Industries builds them into the schedule with operations before work starts at a unit. In a fab, construction happens beside production tools whose downtime is very expensive, so tie-ins to ultrapure water, chemical and exhaust systems are staged as short, rehearsed events with contamination control and particle testing before the system returns to service.

Paul Industries uses the same preparation for both: detailed walkdowns, isolation and tie-in packages written for each connection, spools prefabricated and cleaned off site, and test records completed before the owner signs the system back into production.

Water scarcity and reuse in Southwest plant design

Water scarcity drives Southwest plant design more than any other single factor. The Colorado River supplies Arizona, Nevada, Utah, Colorado and New Mexico, and the 2007 guidelines that have shared its shortages run through 2026, with the rules that follow still setting how future cuts fall on each state.

Paul Industries designs reuse into the process from the start. Reverse osmosis reject can feed cooling tower makeup, cooling tower blowdown can be treated and returned, fab rinse water can be segregated by contamination level and reclaimed, and zero liquid discharge systems concentrate the last stream into solids. Each step adds equipment, chemistry and operating cost, and Paul Industries runs those numbers against the plant’s water rights and permit limits.

How much does a Southwest process project cost?

A Southwest process project costs what its scope, materials, water and cooling design, documentation and schedule require. The largest swing factors in this region are water treatment and reuse scope, cooling system choice and whether the work falls in a refinery turnaround or a running fab.

What drives the cost of process work in a Southwest plant
Cost driverEffect in the SouthwestWhat to send for a firm price
Water reuse levelEach added reclaim or concentration stage adds membranes, pumps and chemistryWater source analysis, permit limits and recovery target
Cooling choiceTowers cost less to build but use water; dry and hybrid systems cost more and save itHeat load, process temperature and water budget
Material and purityUltrapure and BPE systems need PVDF, high-purity polymers or electropolished stainlessP&IDs, purity specification and owner standards
Turnaround or live plantRefinery and gas plant work concentrates into short, crowded outagesTurnaround dates and the list of equipment to open
AltitudeThinner air derates fans, burners and engines and lowers pump suction marginSite elevation and equipment data sheets
Permit pathOklahoma, New Mexico and Utah review against a state code; Texas, Arizona, Nevada and Colorado cities review their ownStreet address, county and any permit number on file

Early in a Southwest project Paul Industries prices a budget range from similar finished jobs; the number becomes fixed when drawings, a walkdown of the site and the dates are settled.

What to expect from Southwest industrial contractors

Southwest industrial contractors are expected to deliver code-documented work into very different plants, often for the same owner, and plant engineers comparing industrial contractors in Texas or industrial contractors in Arizona look for the same four things: one welding and testing program from ultrapure polymer to carbon steel, working knowledge of each state’s boiler and tank rules, records their quality and safety teams accept, and service that continues after startup. Paul Industries provides all four under one agreement, with one project manager, one schedule and one set of test records.

The Southwest within an all-50-state contract

Paul Industries works in every state and at plants abroad, so an owner with sites in Arizona, Ohio and Mexico keeps one firm and one records format across all of them. The service area page sets out coverage by state, and the international projects page covers crating, export shipping and commissioning at overseas plants.

Plan your Southwest project with Paul Industries

Paul Industries is the Southwest process equipment contractor for owners who want water, cooling, piping and pressure systems designed, fabricated, installed, tested and serviced under one accountable contract, from Houston to Reno. Send the site, the duty the system has to meet, drawings or photos and your build or turnaround window, and Paul Industries will answer with scope, schedule assumptions and a budget range. Call 201-450-8280 or request a quote.

Standards referenced: ASME Boiler and Pressure Vessel Code · National Board Inspection Code · ASME B31.3 · ASME B31.1 · ASME BPE · SEMI F57 · ASHRAE Handbook of Fundamentals · Texas Health and Safety Code Chapter 755 · OAC 380:25 · 14.9.4 NMAC · A.A.C. R20-5-401 et seq. · NAC 455C · Utah Admin. Code R616-2 · 7 CCR 1101-5 · Tex. Loc. Gov't Code 214.216 · 14.7.2 NMAC · Utah Code Title 15A · 30 TAC Chapter 334 · OAC 165:25 and 165:26 · 20.5 NMAC · 7 CCR 1101-14

Frequently asked questions

How many refineries in Texas are operating?

EIA counted 34 operable refineries in Texas on January 1, 2026, with about 6.13 million barrels a day of crude distillation capacity, 33.8 percent of the US total. Paul Industries fabricates and installs process piping, pressure vessels, exchangers and tanks for Texas refineries and plans repair scope around each unit’s turnaround.

Where are the oil refineries in Texas?

Most Texas refineries stand on the Gulf Coast, in Port Arthur, Beaumont and Baytown, the refineries in Texas City, and Corpus Christi, close to crude pipelines, ports and petrochemical customers. Inland plants serve the Panhandle, West Texas and El Paso markets. Paul Industries takes piping, vessel, exchanger and tank work at refineries in both groups.

What are the largest refineries in Texas?

EIA lists Motiva’s Port Arthur refinery, at about 656,000 barrels a day, as the largest in the United States, and Marathon’s Galveston Bay refinery in Texas City at about 631,000. Plants of that size run many units on staggered turnaround cycles, and Paul Industries plans B31.3 piping, vessel and exchanger repairs for each window.

How many oil refineries in Oklahoma are there?

EIA counted five operable refineries in Oklahoma on January 1, 2026, with about 543,800 barrels a day of crude capacity. Their boilers fall under OAC 380:25, which calls for yearly inspection of power and low-pressure boilers. Paul Industries repairs and replaces piping, vessels and exchangers at Oklahoma refineries and gas plants.

Which semiconductor companies in Texas are building fabs?

Texas Instruments began production at its Sherman fab, SM1, in December 2025, and Samsung’s Taylor fab is in trial production with volume targeted for 2027. Their suppliers build gas, chemical and materials plants around them. Paul Industries designs and installs ultrapure water, chemical distribution, process cooling and wastewater systems for that supply chain.

Who installs ultrapure water systems for semiconductor plants in Arizona?

Paul Industries designs, fabricates and installs ultrapure water systems, high-purity polymer distribution, reclaim and wastewater treatment for semiconductor plants in Arizona and for the chemical and gas suppliers around them. Systems are built with components that meet SEMI F57 and turned over with particle, TOC and resistivity test records.

Who builds cooling for data centers in Nevada?

Paul Industries builds chiller plants, dry and adiabatic coolers, cooling towers and liquid cooling distribution for data centers in Nevada, including campuses at the Tahoe-Reno Industrial Center in Storey County. Designs balance water use against fan energy for northern Nevada’s dry climate, and commissioning runs level by level to the owner’s plan.

Do biotech companies in Colorado need altitude adjustments in their process equipment?

Colorado plants at Front Range elevations work with atmospheric pressure near 12 psia, so water boils near 202 F. That shifts autoclave and sterilizer cycles, reduces pump suction margin and changes relief and vent sizing. Paul Industries designs clean utilities, BPE tubing and steam systems for Colorado biotech plants with those corrections built in.

What do supplement manufacturers in Utah need from a process contractor?

Supplement manufacturers in Utah need purified water, sanitary process piping, CIP for liquid lines, dust collection for blending and encapsulation rooms, compressed air treated for product contact and humidity control for capsules and tablets. Paul Industries designs and installs those systems to FDA’s dietary supplement cGMP rule and documents them for audits.

How are boilers inspected in Nevada?

Nevada inspects boilers and pressure vessels under NAC 455C through the Division of Industrial Relations, Mechanical Compliance Section. Power boilers receive an internal inspection each year with an external inspection about six months later, hot water heating boilers every two years and unfired pressure vessels every four. Paul Industries installs and repairs equipment to those rules.

Does Texas have a statewide building code for industrial plants?

Texas has no statewide commercial building code. Texas LGC 214.216 makes the IBC as it stood on May 1, 2012 the commercial code inside cities, which may amend it, and sites outside city limits follow the owner’s design basis and insurer requirements. Paul Industries confirms which applies before design begins.

Which agency regulates storage tanks in New Mexico and Colorado?

New Mexico regulates petroleum tanks through the Environment Department’s Petroleum Storage Tank Bureau under 20.5 NMAC, and Colorado through the Division of Oil and Public Safety under 7 CCR 1101-14. Both rules cover underground and aboveground tanks. Paul Industries builds tank farms, dikes and transfer piping to whichever of the two rules governs the site and files the records that agency asks for.

Is Paul Industries one of the Southwest industrial contractors that works in Arizona and Texas?

Paul Industries takes process projects across Arizona and Texas for fabs, refineries, gas plants, data centers and food plants, from Phoenix and Chandler to Houston, Dallas and the Permian Basin. The company is headquartered in Kilmarnock, Virginia and carries Southwest work under the contract it uses in all 50 states.

Why do desert plants mix cooling towers with dry coolers?

Desert plants mix towers and dry coolers to balance water and power. Cooling towers make the coldest water and keep chillers efficient but consume and concentrate water, while dry coolers save water but lose capacity on the hottest afternoons. Paul Industries designs hybrid systems that run dry most of the year and add evaporation at peak.

What does a Southwest water reuse system include?

A Southwest water reuse system usually combines pretreatment, reverse osmosis, recovery of RO reject for cooling tower makeup, side-stream treatment of tower blowdown and, where permits demand it, a zero liquid discharge stage. Paul Industries designs, builds and starts up each step and reports recovery and water quality at turnover.

Does Paul Industries work at Permian Basin gas plants in New Mexico?

Paul Industries fabricates and installs gas plant piping to ASME B31.3, separators, pressure vessels, compressor station piping and produced water treatment for operators in the New Mexico and West Texas Permian Basin. New Mexico boilers fall under 14.9.4 NMAC, and Paul Industries documents installations for the Construction Industries Division.

Does Paul Industries ship code vessels and skids to Southwest job sites?

Paul Industries ships ASME Section VIII vessels, process skids, spool packages and tanks to Southwest job sites as supply-only orders, pressure tested and documented with nameplates, manufacturer’s data reports and National Board registration. Installation, startup and service join the order whenever the owner asks.

What does a Southwest process project cost?

Southwest project cost depends on water reuse scope, cooling choice, material and purity, documentation and whether the work lands in a turnaround. Paul Industries offers a budget figure from comparable completed work early, then a fixed price after drawings, a site walk and the schedule are agreed. Send P&IDs, water analysis and dates to start.

Have a project at a Southwest plant or fab?

Send the site, the duty the system must meet, drawings or photos and your build or turnaround window. Call 201-450-8280 or request a quote.