Paul Industries provides validation and commissioning in Tennessee for sterile injectable, medical device, pharmaceutical, nuclear and food plants: commissioning, installation, operational and performance qualification, and the turnover packages that let a quality unit release a system. Paul Industries commissions and qualifies the utilities and process systems it builds and those already in a plant: purified water and water for injection, clean steam, CIP and SIP, cleanroom HVAC, autoclaves, process skids and controls. Headquartered at 256 Shore Drive in Kilmarnock, Virginia, Paul Industries takes qualification work at sites across Tennessee.
Request a quote or call 201-450-8280
What validation and commissioning in Tennessee covers now
Validation and commissioning in Tennessee covers a life sciences base that leans toward medical devices and sterile manufacturing: the state’s Department of Economic and Community Development reports more than 2,900 healthcare and life sciences companies and 36,800 employees, more than $4.5 billion of medical equipment and supplies exported in 2024, and twenty years as the Southeast’s leader in medical equipment and supplies exports. It also ranks Tennessee first in the Southeast for employment in surgical appliance and supplies manufacturing. Those plants qualify equipment under FDA’s device and drug regulations, and the utilities that serve them are commissioned under the building codes and the state’s boiler and pressure vessel law.
The national approach to commissioning, qualification and validation is described on the validation and commissioning page. This page covers what changes in Tennessee: the plants now being built and expanded, the state records that belong in an installation qualification, the 2025 code adoption and how qualification programs run across the state’s regions. Companies named here are market facts only.
Pharmaceutical companies in Tennessee and the device makers beside them
Pharmaceutical companies in Tennessee are fewer than the state’s device makers but include sterile manufacturing that needs full qualification, and the state economic development department highlights one case: a Nashville-based contract development and manufacturing organization focused on sterile injectable medicines, which renovated its Elm Hill Pike site and, as of January 2024, was building an additional facility for multiple high-speed manufacturing lines. Pharmaceutical companies in Nashville, Tennessee of that kind run aseptic filling, water for injection, clean steam and isolators, every one of which is qualified before a batch is released.
Medical device companies in Tennessee are expanding at the same time. In July 2026 Medacta International announced that it would move its US headquarters from Franklin to Spring Hill and co-locate its US manufacturing hub there in stages, and in September 2026 Siemens Healthineers announced a $43.6 million expansion of its PET detector research and production site in Rockford, Blount County. Device plants qualify machining centers, cleaning and passivation lines, packaging sealers, sterilizers and cleanrooms, and pharmaceutical manufacturing in Tennessee shares their utilities: purified water, compressed air and HVAC.
| Region | Plants | Systems typically qualified |
|---|---|---|
| Nashville and Davidson County | Sterile injectable contract manufacturing, hospital systems, life sciences research | WFI and clean steam, isolators and filling lines, autoclaves, cleanroom HVAC, environmental monitoring |
| Spring Hill, Franklin and Maury County | Orthopedic and medical device manufacturing | Machining and cleaning lines, passivation, packaging sealers, cleanrooms, purified water |
| Knoxville, Blount County and Oak Ridge | Imaging component production, nuclear fuel and research facilities | Controlled environments, process gas systems, inspection equipment, quality program documentation |
| Memphis and Shelby County | Device makers, hospital systems and temperature-controlled distribution | Warehouse and cold room temperature mapping, sterilizers, purified water, compressed gases |
| Chattanooga, the Tri-Cities and Jackson | Chemical, nutraceutical, food and packaging plants with regulated lines | CIP and SIP, process skids, controls and data integrity, clean utilities |
Medical device companies, Memphis, TN and West Tennessee sites
For medical device companies, Memphis, TN and West Tennessee sites qualify under the Quality Management System Regulation, which since February 2, 2026 has incorporated ISO 13485 into 21 CFR Part 820. Equipment and process validation, software validation and the controls over production and process changes now read through ISO 13485’s language. Paul Industries qualifies the utilities and equipment those plants depend on, from purified water and compressed air to sterilizers, cleaning lines and controlled storage, with protocols written for the device regulation rather than borrowed from drug practice.
Commissioning vs qualification vs validation: the difference in a Tennessee project
The difference between commissioning and qualification is purpose and audience: commissioning proves that a system is installed and works as designed for the engineering team, while qualification proves, under the quality unit’s control, that the aspects of the system critical to product quality meet predefined requirements. Validation is the wider proof that a process, cleaning method or computerized system consistently produces the intended result, and it rests on qualified equipment and utilities.
| Activity | Question answered | Owner of the approval | Typical Tennessee examples |
|---|---|---|---|
| Commissioning | Is the system installed correctly and does it work as designed? | Engineering and the commissioning lead | HVAC balancing, pump and control checks, boiler and chiller startup, energy code commissioning |
| Installation qualification (IQ) | Is the critical system installed as specified, with its records? | Quality unit | WFI loop materials and welds, autoclave documents and state certificate, instrument calibration |
| Operational qualification (OQ) | Does it operate within its specified ranges, including alarms and failure modes? | Quality unit | Sterilizer cycles, isolator decontamination, loop temperatures and flows, alarm tests |
| Performance qualification (PQ) | Does it perform consistently in actual use? | Quality unit | Water sampling over weeks, cleanroom performance with people, sterilizer loads |
| Process and cleaning validation | Does the process consistently make acceptable product, and does cleaning work? | Quality unit and process owners | Fill runs, residue limits after CIP, device cleaning and passivation lines |
Commissioning vs qualification vs validation matters to scheduling because a science- and risk-based program, along the lines of ASTM E2500 and the ISPE Baseline Guide on commissioning and qualification, lets well-documented commissioning tests stand in for repeated qualification tests when the quality unit approves the approach in advance. Paul Industries writes commissioning protocols to the standard a quality unit can accept, which shortens qualification on Tennessee projects that follow that model.
When is IQ OQ PQ required, and who is responsible for it?
IQ, OQ and PQ are required when a system can affect product quality in a regulated plant: equipment, utilities and computerized systems used in drug manufacturing under 21 CFR 211, and production equipment and processes under the device regulation where results cannot be fully verified by later inspection. Water for injection, purified water, clean steam, compressed gases in product contact, sterilizers, cleanrooms and their HVAC, filling and packaging equipment, and process control systems are routinely qualified. Building heating, comfort cooling and plumbing are commissioned and documented under good engineering practice instead.
Who is responsible for IQ OQ PQ divides cleanly: the manufacturer’s quality unit owns the program, approves protocols and reports, and decides on release, while the contractor or vendor executes the testing, documents results and corrects deviations within its scope. Paul Industries writes and executes protocols for the systems it builds, works under the owner’s validation master plan and change control, and hands over executed protocols with every deviation closed.
Tennessee state records that belong in an installation qualification
Tennessee state records belong in an installation qualification because the state’s boiler law counts unfired pressure vessels as boilers (T.C.A. 68-122-102), so jacketed vessels, autoclaves, steam-heated sterilizers, pressure filter housings and receivers above 15 psig and 5 cubic feet carry state registration and certificates. An IQ for such a vessel should include the ASME Manufacturer’s Data Report, the National Board registration, the state registration tag number, the inspection certificate with its expiration date, and the relief valve data.
The statute’s 2023 autoclave exclusion is narrow. It covers vessels within an autoclave that sterilizes reusable medical or dental equipment for a health care licensee and is FDA regulated, which describes a hospital or clinic sterilizer rather than a production autoclave in a drug or device plant. A pure steam generator heated by plant steam above 15 psig can also fall within the rules’ definition of an unfired steam boiler. Paul Industries checks each pressure item against the statute during IQ planning, so the inspection certificate is on file before OQ begins, and keeps the certificate renewal dates in the turnover package so requalification and recertification stay aligned.
Turnover packages a Tennessee quality unit can accept
A turnover package is the bridge between construction and qualification, and a weak one is the most common reason an IQ stalls. Paul Industries assembles it system by system: drawings marked to as-built condition, material certificates traced to heat numbers, weld logs with welder and procedure identification, borescope and examination records, pressure test and passivation reports, instrument calibration certificates traceable to national standards, vendor manuals and spare parts lists, and the state inspection certificates for pressure equipment. Each document is reviewed against the system’s requirements before handover, gaps are closed or recorded as deviations, and the package is indexed so the quality unit can verify any item in minutes. Owners who receive the package in that form can run IQ as verification rather than as an investigation.
Is commissioning required by code in Tennessee buildings?
Commissioning is required by code for many Tennessee commercial buildings through the 2021 International Energy Conservation Code, which the State Fire Marshal’s Office adopted for commercial buildings effective April 17, 2025 with Tennessee modifications that include its commissioning provisions. Exempt jurisdictions such as Nashville and Davidson County, Memphis, Knoxville, Franklin, Spring Hill and Oak Ridge apply the edition and amendments they have adopted, so the energy code commissioning scope depends on the site.
Code commissioning covers mechanical, service water heating and lighting control systems and produces a commissioning report for the building owner; it does not replace GMP qualification, but its functional tests and balancing reports feed the IQ and OQ for HVAC serving classified areas. Paul Industries plans the two together so energy code commissioning and GMP qualification share test data instead of repeating it.
Commissioning and qualification of pharmaceutical facilities, step by step
Commissioning and qualification of pharmaceutical facilities follows a sequence from user requirements to release, and each step depends on the quality of the one before it. Paul Industries runs the sequence for the systems in its scope and fits into the owner’s program for the rest.
- User requirements and system classification: the owner states what each system must do, and a system impact assessment decides which systems need qualification.
- Risk assessment and design review: critical aspects are identified and the design is reviewed against them before construction.
- Factory and site acceptance testing: vendor and site tests are planned so their results can be leveraged where the quality unit approves.
- Construction turnover: weld logs, material certificates, pressure tests, passivation records, calibration and as-builts are verified and indexed.
- Commissioning: startup, functional testing, balancing and control checks under engineering control.
- IQ, OQ and PQ: protocols approved by the quality unit, executed with deviations recorded and closed.
- Release and handover: summary report, system release, maintenance and calibration programs active, and change control in force.
Water, clean steam and utilities on Tennessee sites
Water for injection and purified water loops are the systems most often on the critical path of a Tennessee qualification, because PQ needs weeks of sampling across use points before the water can be released for production. Paul Industries builds and qualifies high-purity water systems in Tennessee, with orbital weld logs, slope verification, passivation records and dead-leg checks in the IQ, sanitization and flow tests in the OQ, and a sampling plan that covers every use point through PQ. Clean steam generators and distribution are qualified for steam quality and condensate tests at the points of use, and CIP and SIP systems in Tennessee are qualified for coverage, temperature and conductivity before cleaning validation begins.
Cleanrooms, HVAC and environmental monitoring
Cleanrooms are qualified to ISO 14644 with airflow, pressure cascade, particle counts, recovery and filter integrity tests, first at rest and then in operation with people and equipment working. Summer humidity makes humidity control a seasonal test point, so qualification plans often add a summer data set for areas with humidity limits. Paul Industries builds and qualifies cleanrooms in Tennessee and ties their monitoring system into the computerized system validation program.
Qualification tests for common Tennessee utility systems
Qualification tests for utility systems follow a common pattern of installation checks, operating challenges and performance evidence, and the table shows what Paul Industries typically includes for the systems Tennessee plants qualify most often. Acceptance criteria come from the user requirements, the applicable compendial or ISO standard and the owner’s specifications.
| System | IQ checks | OQ tests | PQ evidence |
|---|---|---|---|
| Water for injection and purified water | Materials, orbital weld logs, slope, dead legs, passivation, instruments | Flow and velocity, temperature control, sanitization cycle, alarms | Chemical and microbial sampling at every use point over the sampling phases |
| Clean steam | Generator documents, state certificate where it applies, traps and sample points | Pressure control, condensate removal, alarms | Steam quality tests and condensate meeting the water specification |
| Autoclave or sterilizer | ASME data report, state certificate, door interlocks, calibration | Empty chamber distribution, vacuum and leak tests, cycle sequence | Loaded heat penetration and biological indicator studies |
| Cleanroom and HVAC | Filters, ductwork, pressure sensors, balancing report | Airflow, pressure cascade, filter integrity, recovery | Particle counts and monitoring in operation |
| Compressed air and nitrogen | Materials, filters, dryers, sample points | Pressure, dew point, alarms | Particles, moisture, oil and microbial results at use points |
| CIP and SIP | Spray device coverage design, instruments, valves, slope | Riboflavin coverage, flow, temperature, conductivity, timing | Cleaning validation runs with residue and microbial results |
Temperature mapping through a Tennessee summer
Temperature mapping in Tennessee is planned around summer heat and winter cold, because a warehouse or cold room that holds its range in April can drift near roof decks, dock doors and exterior walls in July. Mapping studies place calibrated loggers in a three-dimensional grid, run long enough to capture daily cycles, door openings and defrost events, and identify the hot and cold spots where permanent monitoring probes belong. Many sites map empty and loaded, and repeat in summer and winter where the building envelope makes seasonal differences likely.
Paul Industries designs the mapping protocol with the owner’s quality unit, places and retrieves loggers, analyzes the data against the storage limits, and recommends corrective work when an area fails, whether that is airflow changes, added insulation, door discipline or more refrigeration capacity. Storage areas for sterile products, devices and temperature-sensitive medicines are then remapped after significant changes to racking, HVAC or use.
Computerized systems and data integrity at Tennessee plants
Computerized systems that control or record GMP data at Tennessee plants are validated under 21 CFR Part 11 and the device and drug regulations, usually following a risk-based approach such as GAMP 5. Validation covers user access and roles, audit trails that cannot be switched off, electronic signatures, time synchronization, data backup and restore, alarm management and the configuration baseline. Process controllers on skids, building management systems that monitor classified areas, environmental monitoring systems and laboratory instruments all fall in scope when their data support release decisions.
Paul Industries tests data integrity during OQ: it confirms that audit trails capture changes with user and time, that operators cannot delete records, that a power loss does not lose batch data, and that restored backups match the originals. Configuration is frozen at the end of OQ and every later change goes through the owner’s change control.
Requalification and change control at operating Tennessee plants
Requalification at an operating Tennessee plant is triggered by change, by periodic review, or by trends that suggest drift, and its scope follows the risk the change carries. Replacing a pump with an identical model may need only documented installation checks, while relocating a sterilizer, adding a use point to a water loop or changing control software calls for targeted OQ and PQ. Paul Industries assesses each change with the owner’s quality unit, writes the change-specific protocol, executes it during the planned outage and updates the system documentation so the next periodic review starts from accurate records.
Periodic review is where incomplete records from earlier projects surface. When an existing system’s installation records are missing, Paul Industries reconstructs them by walkdown, material identification, borescope and documentation search, then runs a retrospective IQ so the system’s qualified state rests on evidence again.
What does validation and commissioning cost for a Tennessee project?
The cost of validation and commissioning for a Tennessee project depends on the number and complexity of systems, how many are GMP critical, the quality of the construction turnover records, the extent to which commissioning tests can be leveraged, and the length of PQ sampling. A purified water loop with weeks of sampling, an isolator with decontamination cycle development, and a building management system with data integrity testing each carry very different effort, and poor turnover records add reconstruction time before IQ can start.
Paul Industries prices qualification work from the system list, the owner’s validation master plan or protocol templates, and the construction documents available. A budget range from comparable systems comes first, then a firm price once the protocol scope is agreed. Owners can buy qualification on its own, or as part of a design-build or complete installation contract where Paul Industries builds and qualifies the system together.
Who tests, commissions and qualifies plant systems in Tennessee?
Paul Industries tests, commissions and qualifies plant systems in Tennessee: water for injection and purified water, clean steam, CIP and SIP, cleanrooms and their HVAC, autoclaves and sterilizers, process vessels and skids, compressed gases, controls and data systems. Among validation service providers working in the state, Paul Industries also designs, builds and installs many of the systems it qualifies, which keeps construction records, commissioning and qualification consistent under one contract.
With headquarters at 256 Shore Drive in Kilmarnock, Virginia, and earlier homes as a company formerly based in northern New Jersey, then Pennsylvania, Paul Industries qualifies systems as an East Coast contractor. Validation and commissioning in Virginia is its headquarters-state service; its North Carolina CQV page covers the Triangle’s biomanufacturing build-out; and it qualifies systems for plants in all 50 states and at sites abroad through its international work. Device manufacturers will find more on the medical device industry page.
Commissioning and qualification from Paul Industries across Tennessee
Paul Industries commissions and qualifies Tennessee systems from user requirements to release, with state pressure vessel records in the IQ and data integrity tested in the OQ. The systems it qualifies are often the ones it builds: process piping in Tennessee, pressure vessel fabrication in Tennessee, industrial welding services in Tennessee and the steam plants kept running by boiler repair in Tennessee, with the state overview on the Tennessee page. Send the system list and your validation master plan to request a quote, or call 201-450-8280.
Standards referenced: 21 CFR Parts 210 and 211 · 21 CFR Part 11 · 21 CFR Part 820 (QMSR) and ISO 13485 · FDA Guidance: Process Validation, General Principles and Practices (2011) · ASTM E2500 · ISPE Baseline Guide Volume 5, Commissioning and Qualification · ISPE GAMP 5 · ISO 14644 · T.C.A. 68-122 and Rule 0800-03-03 · 2021 International Energy Conservation Code as adopted in Tennessee
Frequently asked questions
Who provides commissioning and qualification for sterile injectable plants in Nashville?
Paul Industries provides commissioning and qualification for sterile injectable and life sciences plants in Nashville and Davidson County: water for injection, clean steam, autoclaves, isolators, cleanroom HVAC and environmental monitoring. Protocols are written to the owner’s validation master plan, and deviations are closed before release so the site can move to process validation on schedule.
Does Paul Industries qualify device manufacturing systems in Spring Hill and Franklin?
Paul Industries qualifies machining coolant and cleaning lines, passivation, purified water, compressed air, packaging sealers and cleanrooms for device manufacturers in Spring Hill, Franklin and Maury County. Medacta’s planned US manufacturing hub in Spring Hill is one sign of that demand. Protocols follow the device regulation and ISO 13485 language.
Who handles qualification work in Knoxville, Blount County and Oak Ridge?
Paul Industries handles qualification and commissioning in Knoxville, Blount County and Oak Ridge for device component production, research facilities and controlled manufacturing spaces. Plants there with nuclear or national security owners add quality program flow-downs, which Paul Industries builds into its protocols and turnover records.
Does Paul Industries map warehouses and cold rooms in Memphis?
Paul Industries temperature-maps warehouses, cold rooms and freezers for device makers, hospital systems and distribution sites in Memphis and Shelby County, with summer and winter studies where seasonal swings matter. Mapping identifies hot and cold spots, sets monitoring probe locations and supports the site’s storage qualification.
Is there a list of pharmaceutical companies in Tennessee that are building new plants?
The state’s Department of Economic and Community Development publishes life sciences announcements, including the sterile injectable contract manufacturer expanding in Nashville and device makers such as Medacta in Spring Hill and Siemens Healthineers in Rockford. Paul Industries follows those projects and qualifies systems for sites of every size.
Does an autoclave in a Tennessee plant need a state certificate before it is qualified?
A production autoclave whose chamber or jacket exceeds 15 psig and 5 cubic feet is an unfired pressure vessel under Tennessee law and carries a state inspection certificate. The statute’s exclusion for autoclaves covers sterilizers of reusable medical or dental equipment for health care licensees. Paul Industries files the certificate in the IQ before OQ cycles begin.
How long does qualification take for a new Tennessee sterile manufacturing area?
Qualification of a new sterile area usually runs from construction turnover through commissioning, IQ, OQ and PQ over several months, with water system PQ sampling and cleanroom performance qualification often setting the pace. Leveraging commissioning data and closing construction records early are the two largest schedule savers.
Can factory acceptance tests count toward qualification in Tennessee?
Factory acceptance tests can count toward qualification when the quality unit approves the approach beforehand, the tests are executed to approved protocols with traceable instruments, and the system is shipped and installed without changes that would invalidate the results. Paul Industries plans FAT and SAT with that leverage in mind.
What data integrity checks are part of OQ at Tennessee plants?
OQ data integrity checks confirm user roles and access, audit trails that record who changed what and when, electronic signature controls, time synchronization, alarm handling, data backup and restore, and protection against deletion or overwriting. Paul Industries challenges each control and records evidence in the executed protocol.
What does FDA's QMSR change for Tennessee device plants qualifying equipment?
Since February 2, 2026, FDA’s Quality Management System Regulation has incorporated ISO 13485 into 21 CFR Part 820, so equipment qualification, process validation and change control at device plants are read through ISO 13485’s requirements. Paul Industries aligns protocol language and records with that framework.
How is a cleanroom requalified at an operating Tennessee plant?
Cleanroom requalification repeats airflow, pressure differential, filter integrity and particle count tests at the frequency the site’s program and ISO 14644 set, and after changes to HVAC, layout or room use. Paul Industries schedules testing around production shifts and reports against the room’s classification.
What triggers requalification after a change at a Tennessee plant?
Requalification is triggered when a change can affect a qualified system’s critical aspects: replacing components with different ones, relocating equipment, adding use points, changing software or setpoints, or a trend that shows drift. The quality unit assesses each change, and Paul Industries executes the resulting protocol.
Can Paul Industries qualify systems that another builder installed?
Paul Industries qualifies existing and vendor-built systems in Tennessee plants, starting with a document review and walkdown to confirm what is installed. Where records are incomplete, it reconstructs them by inspection and testing before a retrospective IQ, then proceeds to OQ and PQ under the owner’s program.
How much does validation and commissioning cost for a Tennessee system?
Cost depends on system count and complexity, GMP criticality, turnover record quality, how much commissioning data can be leveraged and the length of PQ sampling. Paul Industries gives a budget range from comparable systems once it has the system list and the owner’s protocol approach, then a firm price on agreed scope.
Which food and nutraceutical lines in Tennessee need validation?
Food plants validate critical control points such as pasteurization, retort processes and allergen cleaning under their food safety plans, while dietary supplement plants follow FDA’s current good manufacturing practice for supplements. Paul Industries commissions and verifies CIP, pasteurizers and temperature-critical equipment to those programs without drug-level paperwork.
What should a Tennessee site send to start a validation and commissioning proposal?
Send the system list, user requirements or design documents, the validation master plan or protocol templates, the construction turnover records available, the target release dates and any regulatory commitments. Paul Industries returns a scope, a schedule and a budget range, then a firm price once the protocol approach is agreed.
Commissioning or qualifying a system in Tennessee?
Send the system list, your validation master plan and the release date the site needs. Call 201-450-8280 or request a quote.
