Paul Industries is a US process equipment contractor for Poland that designs and fabricates pressure vessels, process skids, tanks and complete process systems for Polish plants, tests them in the United States, ships them to Gdansk or Gdynia, and then sets, starts and commissions them at the plant or supervises that site work. Each pressure part reaches Poland with its Pressure Equipment Directive documents, the technical description and operating manual that UDT registration asks for, instructions in Polish, and electrical design for 50 Hz, 230/400 V power. Paul Industries quotes Polish projects in US dollars from its headquarters at 256 Shore Drive, Kilmarnock, Virginia.
Request a quote or call 201-450-8280
What a US process equipment contractor for Poland takes on
A US process equipment contractor for Poland takes on the full arc of a project for a Polish plant: process engineering, fabrication with traceable materials, the factory acceptance test, export packing and freight, and the site work that ends with a system cleared for operation by the technical inspection authority. Paul Industries handles that arc for pharmaceutical, chemical, battery, dairy and food plants. Typical scopes include pressure vessels and reactors, metering and transfer skids, pharmaceutical water systems, process cooling systems and complete turnkey lines under one control system.
Polish plants contract in one of three ways. Supply plus site supervision means Paul builds, tests and delivers the equipment and then directs the setting, connection and first run in Poland. Design-build extends Paul’s scope to utilities and layout around the new line. Complete installation keeps Paul responsible on site through the UDT acceptance test, start-up and qualification. For the full set of countries Paul works in, see the international overview; this page deals with Polish inspection law, plant power, the Baltic shipping lane and customs.
Pharmaceutical companies in Poland and where they manufacture
Pharmaceutical companies in Poland combine large domestic generic producers with the plants of multinational groups, and their manufacturing sites buy water systems, solvent recovery, reactors and clean utilities. Polpharma, a Polish-owned group and one of the Polish pharmaceutical companies with its own API production, makes most of its active substances at its API plant in Starogard Gdanski, south of Gdansk, and runs a parenteral forms plant in the Polpharma Technology Park on the same town’s edge. Plants of that kind need reactor trains, solvent handling, purified water and the sterile utilities that injectable production depends on.
Pharmaceutical manufacturing companies in Poland answer to the Chief Pharmaceutical Inspectorate, known by its Polish initials GIF, which joined the Pharmaceutical Inspection Co-operation Scheme in January 2006. The inspectorate’s GMP findings carry weight abroad as well: in December 2013 the US FDA and the Polish inspectorate agreed to exchange the results of GMP inspections. For a plant buying new equipment, that means qualification documents written to EU GMP, with Annex 1 governing sterile work, and records that any PIC/S inspector can follow. Paul delivers that package for pharmaceutical plants and executes it on site through validation and commissioning.
Chemical companies in Poland and the heavy process market
Chemical companies in Poland run large, integrated process sites, starting with Orlen’s Plock refinery, the country’s largest at about 276,000 barrels a day, which sits alongside the group’s petrochemical units. The Grupa Azoty group runs nitrogen and chemical plants at Tarnow, Pulawy, Police and Kedzierzyn-Kozle, and its Polimery Police polypropylene project north of Szczecin was built with Hyundai Engineering. These chemical plants in Poland buy pressure vessels, heat exchangers, reactor skids and chemical process equipment built to recognized pressure codes and documented for UDT.
The chemical industry in Poland now shares the market with battery manufacturing. LG Energy Solution’s plant at Biskupice Podgorne near Wroclaw, established in 2016, is described by the Polish trade agency as the largest battery manufacturer in Poland and in Europe. Cell plants depend on dry rooms, solvent recovery for electrode coating, chilled water and process cooling, all of which carry pressure parts and controls that fall under the same inspection rules. Polish dairies and food plants add sanitary tanks, CIP and dairy processing systems to the list.
What is UDT in Poland, and how does it treat a US-built vessel?
UDT, Poland’s Office of Technical Inspection, is the state body that supervises pressure equipment, lifting equipment and other technical devices in use, under the Act on Technical Inspection of 21 December 2000. The Pressure Equipment Directive, transposed by the Minister of Development’s regulation of 11 July 2016, governs how a vessel is designed, built and CE marked; UDT’s role starts when the plant wants to operate it. A vessel built and assessed in the United States to the directive is treated like any other once it reaches Poland: it is reported to UDT, examined, and either cleared for operation or held until the documentation is complete.
UDT assigns each device one of three forms of supervision: full, limited or simplified. The form depends on the type of device, its pressure, its volume or diameter, and the fluid it holds. Under full supervision the operator needs a UDT decision permitting operation before first use, and UDT carries out periodic examinations afterwards. Under simplified supervision no decision is issued. The detailed technical conditions for pressure equipment sit in the regulation of 17 December 2021, published as Dz.U. 2022 item 68, which also sets what goes in the technical description and the operating manual.
Registering new equipment with UDT
Registration of a new device under full supervision follows a fixed sequence. The operator submits a written application to the UDT branch responsible for the site, attaching two sets of documentation for each device in the installation. A UDT inspector then examines the device in a ready-to-operate condition, known as the acceptance examination, issues a report, and grants the decision permitting operation when the result is positive. Each device receives its own inspection book, the record that follows it through every later examination. UDT also checks that the people operating supervised devices hold the required qualification certificates.
The documentation is where a US-built skid either sails through or stalls. Paul prepares, for every device under supervision, the declaration of conformity, the technical description, design calculations, material certificates, weld and NDT records, the pressure test report, safety valve data and the operating manual, in Polish, arranged so the plant can submit both required sets without rework. Conformity assessment records under the Polish regulation are kept in Polish or another language the notified body accepts, so Paul supplies Polish translations alongside the English originals.
Forms of supervision and examination intervals
Examination intervals under UDT supervision vary by device type, and UDT publishes them for each category. Two examples show the range. A compressed air receiver in a compressor set above 3,000 bar-litres falls under full supervision with an external examination every three years and an internal examination every nine; between 800 and 3,000 bar-litres it needs the external examination only. Process piping carrying gas or vapour above 0.5 bar in large diameters faces an external examination every year, a main inspection every three years and a pressure test every six.
| Device | Form of supervision | External | Internal or main | Pressure test |
|---|---|---|---|---|
| Air receiver in compressor set, 800 to 3,000 bar-litres | Full | 3 years | None set | None set |
| Air receiver in compressor set, above 3,000 bar-litres | Full | 3 years | 9 years | None set |
| Process piping, gas or vapour, DN above 350 | Full | 1 year | 3 years | 6 years |
| Ammonia refrigeration piping, DN above 25 | Full | 2 years | None set | None set |
| Refrigeration piping, other refrigerants, DN above 25 | Full | 4 years | None set | None set |
Those intervals shape the design. A vessel that UDT will open every few years needs manways and nozzles that the plant reaches from a platform, and a piping system scheduled for pressure tests needs vents, drains and test connections built in. Paul lays out every supervised device with its examination in mind, so the plant meets UDT dates with short outages.
Design codes Polish plants name: EN 13445, EN 13480 and ASME
Design codes on Polish projects come from the plant’s own engineering standard as much as from the law. The Pressure Equipment Directive sets essential safety requirements rather than a single calculation method, so a vessel designed with ASME Section VIII calculations, or with the harmonised European standard EN 13445, can meet the directive once its materials, welding, testing and conformity assessment satisfy the directive’s requirements. Piping follows the same logic, with EN 13480 as the harmonised European standard and ASME B31.3 as the American process piping code. Paul designs to whichever code the plant’s specification names, states the code on the drawings and in the technical file, and aligns material grades, flange standards and weld procedures with it from the start, which avoids late changes when the UDT inspector reviews the documentation.
Material choice carries its own Polish detail. European material standards and certificates to EN 10204 type 3.1 are the norm on Polish sites, so Paul orders plate, pipe and fittings with those certificates and records heat numbers on the weld maps. Flanges are specified to EN 1092-1 where the plant’s piping follows European dimensions, or to ASME B16.5 where the plant uses American class ratings, and the choice is fixed in the first design review so every mating flange on the site matches. Gaskets, bolting and instrument connections follow the same decision. The result is equipment that a Polish maintenance team repairs with parts bought in Poland, and a documentation set that a UDT inspector reads without asking for conversions.
Polish-language documents and machinery rules
Polish law on conformity assessment and market surveillance, the Act of 13 April 2016, requires a product’s instructions and safety information to be attached in Polish, written clearly and legibly, with fines for manufacturers and importers who leave them out. Skids with motors and controls also follow the Machinery Directive, which the Machinery Regulation (EU) 2023/1230 replaces from 20 January 2027, along with the Low Voltage and EMC directives and, for solvent or hydrogen areas, the ATEX Directive. Paul writes manuals, warning labels and the skid’s operating instructions in Polish, with English copies, and records the European declarations for every bought-out component.
Voltage in Poland and electrical design for a Polish plant
The voltage in Poland is 230 V single-phase and 400 V three-phase at 50 Hz, in line with the rest of the European Union. Comparing voltage in Poland vs USA, both numbers change: US plants commonly run three-phase motors at 480 V and 60 Hz, so a US-standard skid needs motors rated for 400 V, 50 Hz, and its pumps and fans must be selected on 50 Hz curves, since they turn about a sixth slower than at 60 Hz. The 3 phase voltage in Poland also changes heater element ratings and transformer taps on the panel.
Installation inside the plant follows the PN-HD 60364 series, the Polish adoption of the European low-voltage installation rules, and the plant’s own electrical standard. Paul designs panel feeders, cable sizes, protective earthing and motor control for the site’s single-line diagram, and specifies IEC-rated components throughout so spares are available from Polish distributors after handover.
| Topic | US default | Polish plant | How Paul delivers it |
|---|---|---|---|
| Supply | 480 V, 60 Hz | 400 V, 50 Hz | Motors, drives and heaters rated for the Polish supply |
| Pump and fan duty | Selected at 60 Hz speed | About a sixth slower at 50 Hz | Selections made on 50 Hz curves before fabrication |
| Pressure equipment in use | State jurisdiction rules | UDT supervision and decision to operate | Two documentation sets per device, ready for UDT |
| Language | English | Polish instructions and safety information | Polish manuals and labels with English copies |
| Drawings | Inches and psi | Millimetres, bar and DN sizes | Metric drawings from the first revision |
Shipping to Poland from USA East Coast ports
Shipping to Poland from USA East Coast ports ends at Gdansk or Gdynia on the Baltic, and published services for the crossing run from about three and a half weeks on a weekly New York to Gdynia service to an average near seven weeks on routings with several transfers. Gdansk also gained a weekly MSC service linking it with Bremerhaven, New York and Charleston, which shortens the trip for equipment that fits its rotation. Paul confirms the sailing before the factory acceptance test date is fixed.
Gdansk is the country’s main container gateway. Its container terminals handled nearly 2.8 million TEU in 2025, up 23 percent on the previous year, almost all of it through the deep-water Baltic Hub, whose new T3 terminal added 1.5 million TEU of annual capacity in 2025. Gdynia handles additional container and breakbulk traffic. For plants in Starogard Gdanski or Plock, the truck leg from Gdansk is short; equipment for Wroclaw, Krakow or the south moves by road or rail across the country, and Paul checks crate heights and weights against that route before modules are sized.
Customs, VAT and Incoterms for equipment entering Poland
Customs clearance in Poland runs through the National Revenue Administration, KAS, with declarations filed electronically on the PUESC platform. The importer registers for an EORI number, the equipment is classified under the EU common tariff, and import VAT at the 23 percent standard rate is charged on the customs value plus duty. Polish VAT law also lets qualifying registered importers settle import VAT in their VAT return instead of paying it at clearance. Poland uses the zloty, and Paul quotes in US dollars.
Under Incoterms 2020, Polish buyers with their own freight arrangements often take delivery FCA at the US port; plants that want the voyage and inland leg handled for them choose DAP at the plant gate, and DDP puts duty and VAT into Paul’s delivered price. Crates are built from ISPM 15 heat-treated timber, each marked to match the packing list, and stainless equipment is sealed with desiccant for the Baltic winter. Sister projects in Germany and Sweden often use the same North Sea and Baltic services.
How a Polish project with Paul Industries is organized
A Polish project with Paul Industries is organized in nine steps, and the first two fix the PED categories, the UDT supervision form for each device, the Polish documents and the delivery route. The table lists the steps and the record each one hands to the Polish plant.
| Step | Activity | What the Polish plant receives |
|---|---|---|
| 1. Scope and regulatory review | Process duty, utilities, PED category and UDT form of supervision per device | Device list with supervision form and expected intervals |
| 2. Engineering | P&IDs, layout, 400 V, 50 Hz electrical design | Metric drawings with examination access shown |
| 3. US fabrication | Welding, assembly, panel building, instrument installation | Material certificates, weld maps, NDT records |
| 4. Factory acceptance test | Pressure test, interlocks and sequences, attended on site or by video link | Signed FAT report for the UDT file |
| 5. Documentation sets | Two UDT sets per supervised device, Polish manuals and labels | Application-ready packages for the UDT branch |
| 6. Packing and freight | ISPM 15 crates, sailing to Gdansk or Gdynia, inland haul | Packing list, invoice and certificate of origin |
| 7. Installation or supervision | Setting, tie-ins, electrical connection, readiness for UDT acceptance | Installation record for the acceptance examination |
| 8. Start-up and qualification | Flushing, first runs, SAT, IQ and OQ | Executed protocols for GMP sites |
| 9. Handover and service | Training, spares, service plan aligned with UDT dates | Polish instructions, spares list, inspection book data |
Step 5 is the one that most often decides a Polish schedule. A complete pair of documentation sets lets the UDT branch schedule the acceptance examination as soon as the equipment is set, so start-up follows without waiting on paperwork. Paul prepares the sets during fabrication, in parallel with the welding and testing, rather than after the equipment ships. The same files feed the inspection book and the plant’s maintenance system, so the dates of the first periodic examinations are known on the day the decision to operate is issued, and the plant plans its first outages around them.
Who builds process systems for plants in Poland?
Paul Industries builds process systems for plants in Poland, from compressed air receivers and dosing skids to complete reactor trains, purified water and WFI systems, CIP and process cooling, and carries each one through factory testing, freight, installation, UDT acceptance, start-up and qualification. Engineering, US fabrication, the directive and UDT paperwork, and after-sales service all remain Paul’s responsibility. Plants in Gdansk and Pomerania, Plock, Warsaw, Wroclaw, Krakow, Pulawy and Szczecin have one contractor answerable from the first review to the last service call.
What drives the cost of process equipment delivered to Poland?
The delivered cost of process equipment for a Polish plant depends on five factors on top of the equipment: Baltic freight and the inland leg, export crating, PED and UDT documentation in Polish, import charges under the chosen Incoterm, and the installation scope. Paul’s quote separates each one.
- Freight. Direct Baltic sailings and container-sized skids keep the sea leg lean, while oversize modules for southern Poland add flat racks, road permits and escorts.
- Crating. Winter crossings and long storage at the receiving plant call for sealed wrap and heavier preservation on polished stainless equipment.
- Documentation. Conformity assessment for higher PED categories, two UDT sets per device and Polish translation add engineering hours.
- Import charges. Under FCA or DAP the Polish importer pays duty and 23 percent VAT; under DDP Paul carries them.
- Installation scope. Supervision uses fewer Paul site days; complete installation hands Paul the setting, UDT acceptance readiness, start-up and qualification.
Paul sends a budget range from similar work first and a fixed price once drawings, supervision forms and delivery terms are confirmed.
Paul Industries for Polish process plants
Paul Industries designs, fabricates, tests, ships, installs and commissions process equipment for pharmaceutical, chemical, battery, dairy and food plants in Poland from its headquarters at 256 Shore Drive, Kilmarnock, Virginia. Every supervised device arrives with two complete documentation sets for UDT, Polish instructions and wiring for 400 V, 50 Hz power, and each project finishes with signed qualification records and a maintenance schedule. Tell us the duty, the Polish site and the Incoterm you want through request a quote.
Standards referenced: Pressure Equipment Directive 2014/68/EU · Polish Act on Technical Inspection of 21 December 2000 · Regulation of 17 December 2021 on technical inspection conditions for pressure equipment (Dz.U. 2022 item 68) · Regulation of 11 July 2016 on requirements for pressure equipment (Dz.U. 2016 item 1036) · Machinery Directive 2006/42/EC · Machinery Regulation (EU) 2023/1230 · Low Voltage Directive 2014/35/EU · ATEX Directive 2014/34/EU · PN-HD 60364 · EN 13445 · EN 13480 · EU GMP Annex 1 · Incoterms 2020 · ISPM 15
Frequently asked questions
Which pharmaceutical companies in Poland run API and injectable plants?
Polpharma makes most of its active pharmaceutical ingredients at its API plant in Starogard Gdanski and runs a parenteral forms plant in the technology park in the same town. Other domestic and multinational groups run tablet, liquid and sterile plants elsewhere in the country. Paul Industries builds reactor skids, solvent handling, purified water and WFI systems for plants of that kind, documented for UDT and EU GMP.
What is UDT in Poland, and does a new skid need its approval?
UDT is Poland’s Office of Technical Inspection, which supervises pressure equipment in use under the Act on Technical Inspection of 2000. Devices under full supervision need a UDT decision permitting operation, granted after an acceptance examination at the site. Paul Industries prepares the two documentation sets per device, in Polish, so the plant’s application to the UDT branch is complete when the skid arrives.
Which supply should a skid for a Polish factory be wired for?
Poland uses 230 V single-phase and 400 V three-phase power at 50 Hz. Large plants receive power at medium voltage and step it down on site, so the plant’s single-line diagram sets the feeder for new equipment. Paul Industries designs motors, drives, heaters and panels for 400 V, 50 Hz and to the PN-HD 60364 installation rules.
How many weeks should a Polish plant allow for the Atlantic and Baltic crossing?
Published services run from about three and a half weeks on a weekly New York to Gdynia service to an average near seven weeks on routings with several transfers. Gdansk also has a direct weekly MSC loop calling at New York and Charleston. Inland haulage and customs add days. Paul Industries confirms the sailing before setting the factory acceptance test date.
Who builds pressure vessels for chemical plants in Plock and Pulawy?
Paul Industries designs and fabricates pressure vessels, heat exchangers, reactor skids and process piping for chemical plants in Poland, including the refinery and petrochemical area of Plock and the nitrogen plants at Pulawy. Each vessel is built and documented to the Pressure Equipment Directive and prepared for UDT registration; Paul then sets and starts it at the plant or directs that work.
Can Paul Industries supply process cooling to battery plants near Wroclaw?
Paul Industries designs, builds and installs chilled water, process cooling, solvent handling and utility skids for battery manufacturing in Poland, including the Wroclaw region. Pressure parts are documented to the Pressure Equipment Directive and arranged for UDT supervision where it applies. Paul ships the equipment through Gdansk, hauls it south, and starts it up at the plant.
How often does UDT examine a compressed air receiver?
A compressed air receiver in a compressor set above 3,000 bar-litres is under full UDT supervision, with an external examination every three years and an internal examination every nine. Receivers between 800 and 3,000 bar-litres need the three-yearly external examination. Paul Industries designs inspection openings and isolation valves so those examinations run with short shutdowns.
Are instructions in Polish required for imported process equipment?
The Polish Act of 13 April 2016 on conformity assessment and market surveillance requires instructions and safety information to accompany a product in Polish, written clearly and legibly, and it sets fines for missing them. Paul Industries supplies the operating manual, safety instructions and warning labels in Polish, with English copies for the plant’s engineers.
Voltage in Poland vs USA: which parts of a US skid change?
A US-standard skid built for 480 V, 60 Hz power changes in three places for Poland: motors and heaters move to 400 V ratings, pumps and fans are reselected because they run about a sixth slower at 50 Hz, and control components move to IEC ratings. Paul Industries makes those selections at the design stage and tests the panel before it ships.
Who supervises GMP for pharmaceutical manufacturing companies in Poland?
The Chief Pharmaceutical Inspectorate, GIF, inspects drug manufacturers in Poland and has been a member of the Pharmaceutical Inspection Co-operation Scheme since January 2006. Its inspectors apply EU GMP, with Annex 1 for sterile products. Paul Industries writes qualification documents to those rules and executes IQ and OQ on Polish sites.
Which Polish port suits a plant in Starogard Gdanski or Plock?
Gdansk suits both. Starogard Gdanski lies a short drive south of the port, and Plock is reached by road through central Poland. Gdansk’s Baltic Hub handled almost all of the port’s container traffic in 2025, and Gdynia handles additional container and breakbulk cargo. Paul Industries picks the port by sailing, crate size and inland route.
Which party settles the 23 percent VAT when a skid clears customs in Gdansk?
The importer pays import VAT at the 23 percent standard rate on the customs value plus duty, and qualifying registered importers settle it in their VAT return. Under FCA, CIF or DAP the Polish buyer is the importer. On a DDP order Paul Industries takes on clearance and pays duty and VAT, listing each charge on its own line of the landed price.
What documents go to the UDT branch for a new pressure vessel?
The plant files a written application with two sets of documentation for each device, typically the declaration of conformity, technical description, design calculations, material certificates, weld and NDT records, pressure test report, safety valve data and operating manual. Paul Industries prepares both sets during fabrication, in Polish with English originals.
Do chemical companies in Poland accept ASME-designed vessels?
Polish plants accept vessels designed with ASME calculations when the equipment is assessed and CE marked under the Pressure Equipment Directive, since the directive governs placing it on the market. Some plant standards name EN 13445 instead. Paul Industries designs to the code the plant names and documents the vessel to the directive and UDT requirements.
Can Polish engineers witness the factory acceptance test?
Engineers from Polish plants attend the test in the United States, follow it on a live video link, or combine both. Because the Polish working day starts well before the American one, Paul Industries puts witnessed test points early in the US day. The signed report becomes part of the UDT documentation set.
Who installs dairy and food process lines in eastern Poland?
Paul Industries designs, ships and installs sanitary tanks, CIP systems, pasteurizer skids and process piping for dairies and food plants in Poland, including the dairy regions of the east. Sanitary pressure parts are documented to the Pressure Equipment Directive and prepared for UDT where supervision applies. Paul installs the line or supervises its installation and starts it up.
How should a Polish plant prepare a request for a price?
The most useful request includes the process duty, P&IDs or a process outline, the plant address, the available utilities, the plant’s engineering standards, any GMP grade, the preferred Incoterm and the installation scope. Paul Industries replies with the expected UDT supervision forms, a freight plan and a budget range in US dollars, then fixes the price once scope is agreed.
Planning process equipment for a plant in Poland?
Send the process duty, the plant location in Poland and the delivery term you prefer, and Paul Industries will set out the UDT supervision forms, the Baltic route and an opening figure in dollars. Call 201-450-8280 or request a quote.
