Paul Industries is a data center mechanical contractor in Delaware that designs, prefabricates, installs, tests and services closed-loop cooling plants, chilled water and condenser piping, liquid cooling distribution, generator fuel systems and the pressure vessels and tanks behind computer rooms and data halls in New Castle, Kent and Sussex counties. Delaware wrote its data center rules in 2026, county by county and town by town, and several of them land squarely on the mechanical scope. Paul Industries, headquartered at 256 Shore Drive in Kilmarnock, Virginia, builds the mechanical systems to those rules and carries the permits and records through turnover.
Request a quote or call 201-450-8280
Data center mechanical contractor in Delaware: what the scope includes
The work of a data center mechanical contractor in Delaware spans everything that moves heat and fuel on a site: chillers, dry coolers or towers, pumps and chilled water mains, coolant distribution units and liquid cooling loops, air handlers and fan walls, generator fuel storage and day tanks, expansion tanks and air separators, compressed air and the controls that tie them together. Paul Industries takes that scope as one package or in parts, for a new hall, an expansion or a retrofit inside an operating building.
The national picture of data center mechanical systems, materials and methods is set out on the data center mechanical contractors page, and the cooling equipment choices for Delaware weather are covered under data center cooling in Delaware. This page covers the Delaware rules, sites and paperwork that shape the mechanical package before the first pipe is hung.
| System | What Paul Industries builds | Delaware touchpoint |
|---|---|---|
| Heat rejection | Air-cooled chillers, dry coolers, closed-circuit fluid coolers, towers where allowed | New Castle County bar on open-loop cooling for new applications |
| Chilled water and condenser piping | Mains, headers, risers, valves and branch piping, prefabricated spools and racks | County building and mechanical permits; ASME B31.9 or B31.3 practice |
| Liquid cooling | Facility water loops, CDU connections, manifolds, filtration and fill systems | Same permits; water source documentation in Kent County |
| Expansion tanks and air separators | ASME vessels on chilled water and glycol systems | Vessels over 120 gallons registered with the DNREC Boiler Safety Program |
| Generator fuel | Bulk aboveground tanks, day tanks, transfer pumps, fuel piping, leak detection | Regulation 1352 tank rules; Regulation 1144 registration and 1102 permits for generators |
| Refrigeration and HVAC | Chillers, CRAH units, computer room air conditioners, refrigerant piping | Master HVACR license requirement under 24 Del. C. Chapter 18 |
| Public sector rooms | Computer rooms for state agencies, universities and schools | Prevailing wage under 29 Del. C. 6960 |
Which data center proposals has Delaware seen, and what became of them?
Delaware has seen at least four data center proposals since the early 2010s, plus industrial parcels zoned to welcome more, from a campus with its own power plant at the University of Delaware to a gigawatt-scale plan near Delaware City, and most of them stalled or changed course. For a mechanical contractor the history matters because each one failed or narrowed over the same things the mechanical package carries: on-site generation, diesel fuel, water and noise.
| Proposal | Location | What was planned | Outcome |
|---|---|---|---|
| The Data Centers LLC, STAR Campus | Newark | Up to 900,000 sq ft of data center space with a 279 MW cogeneration plant | University of Delaware ended the lease in July 2014 |
| Cirrus Delaware, Middletown Technology Center | Middletown | 40 MW, about 228,000 sq ft, with a 52.5 MW natural gas plant | Approved by the town council; state grant of $7.5 million for electrical and fiber work in 2016; current status unclear |
| Project Washington, Starwood Digital Ventures | Near Delaware City and New Castle | 1.2 GW at full operation, 516 backup diesel generators, more than 2.5 million gallons of stored diesel | DNREC ruled it prohibited under the Coastal Zone Act in February 2026; upheld in March; appeal withdrawn, as reported in August 2026 |
| Harrington Logistics site | Harrington, Kent County | A 24 MW data center | City council rejected the zoning change on August 17, 2026 |
| Former Reichhold Chemical plant | North of Dover, Kent County | A vacant industrial parcel zoned to allow data centers | No application filed as of the July 2026 Kent County vote |
The pattern is clear enough to plan around. A proposed data center in Delaware that depends on a large on-site power plant or hundreds of diesel generators draws the hardest review, while a building that buys grid power, uses closed-loop cooling and keeps fuel storage proportionate meets the rules as written. The Middletown and Newark plans both paired the data center with gas-fired generation, and the Project Washington decision turned on the scale of its diesel fleet and fuel storage.
Delaware data center regulations, county by county
Delaware data center regulations are written at the county and municipal level rather than in one statewide code, so the rules that reach the mechanical package depend on where the site sits. Delaware law lets the Kent County Levy Court and the New Castle and Sussex county councils adopt their own building, plumbing and electrical codes, and the 2026 data center ordinances followed the same split.
| Jurisdiction | Rule and date | Key requirements | Effect on the mechanical scope |
|---|---|---|---|
| New Castle County (unincorporated) | Ordinance passed 12-0, March 10, 2026 | 1,000 ft buffer from residential zones, schools and day care, reducible to 500 ft with a noise study; open-loop cooling prohibited; applies to applications filed after enactment | Closed-loop heat rejection; equipment noise data early in design |
| Kent County (unincorporated) | Levy Court ordinance, July 21, 2026 | Allowed with conditions in two industrial districts; 300 ft buffer; 6 ft vegetative buffer; noise limit; letters from water and electric providers | Water demand figures and power load needed before approval |
| City of Dover | 18-month moratorium, approved October 2026 | Permits for new data centers paused during a city study | Planning only, until the city sets rules |
| City of Harrington | Zoning change rejected, August 17, 2026 | Data centers stay outside the city’s allowed uses | No new data center scope within city limits |
| Coastal Zone (state) | Coastal Zone Act, 1971; Conversion Permit Act, 2017 | Heavy industry barred in the zone except by conversion permit at 14 grandfathered sites | Generation and fuel storage reviewed as part of the use |
New Castle County’s closed-loop rule and the cooling plant
New Castle County’s ordinance bars open-loop cooling systems, which use more water than closed-loop systems, for any data center application filed after March 2026. The practical result is a cooling plant built around air-cooled chillers, dry coolers, closed-circuit fluid coolers or adiabatic units that keep process water sealed, with trim cooling sized for the hottest July afternoons in Newark and Wilmington. Paul Industries reads each design against the ordinance’s definitions before equipment is bought, because the word open-loop carries different meanings in different design offices.
The same ordinance’s buffer rules push noise into the mechanical design. A site within 1,000 feet of a residential zone needs a noise study to build as close as 500 feet, and chillers, dry cooler fans, pumps and generators are the loudest sources on most campuses. Paul Industries supplies sound data for every piece of rotating equipment it selects, and builds the acoustic enclosures, low-speed fan arrays and vibration isolation that the study calls for.
Kent County, Dover and Harrington
Kent County’s ordinance, which covers only unincorporated land, asks a data center applicant for written documentation from the water and electric providers on how the project affects existing infrastructure, along with letters of no objection from county and state agencies. For the mechanical contractor that means a credible water balance and a peak power figure for the cooling plant at the application stage, long before construction drawings. The cities run their own course: the Harrington, Delaware data center plan for the former Harrington Logistics property was turned down in August 2026, and Dover paused new data center permits for 18 months in October 2026.
Is there a Delaware data center moratorium?
A Delaware data center moratorium exists at the city level in Dover, where the council approved an 18-month pause on new data center permits in October 2026 while the city studies the effects and decides how to regulate them. New Castle County adopted regulations rather than a pause, and Kent County adopted conditional rules for unincorporated land while its attorney reviewed whether a full ban would be lawful. Owners planning a site should expect the map to keep moving, and Paul Industries confirms the rule in force for the site’s jurisdiction at the start of every mechanical estimate.
Generators, fuel tanks and air permits on a Delaware site
Generators, fuel tanks and air permits form a larger share of the mechanical scope in Delaware than in many states, because DNREC regulates each piece and the Project Washington decision showed how heavily regulators weigh them. Every stationary generator in Delaware is registered under Regulation 1144, Control of Stationary Generator Emissions, and emergency generators larger than 450 kW, along with any non-emergency generator, also need a Regulation 1102 construction permit.
Regulation 1144 also limits when generators are exercised. Testing and maintenance runs are barred on Air Quality Alert days, before 5 p.m. on a Code Red or Code Orange ozone or particle forecast, so the generator test schedule, the fuel polishing plan and the load bank arrangements all account for summer alert days. Paul Industries builds the fuel systems so that day tanks, transfer pumps and return lines can be exercised and maintained on the permitted days without forcing a generator run.
Diesel storage falls under the DNREC Tank Management Section. Aboveground tanks follow 7 DE Admin Code 1352, which implements the Jeffrey Davis Aboveground Storage Tank Act and was last amended effective January 2024, and buried tanks follow the underground storage tank rules in 7 DE Admin Code 1351. Paul Industries designs, fabricates and installs double-wall tanks, containment, overfill protection, leak detection and fuel piping to those rules and NFPA 30 and NFPA 110, and assembles the registration records for the owner. The tank fabrication in Delaware page goes deeper on the tank rules themselves.
The state’s own direction adds weight to that work. Laws signed in August 2026 ask large data centers to draw part of their backup power from clean sources rather than diesel and to reduce use during peak demand, so a Delaware fuel system is increasingly paired with batteries, gas or other sources, and with thermal storage that lets the cooling plant ride through a curtailment.
Pressure vessels, licenses and permits on the mechanical package
Pressure vessels on a data center, including expansion tanks, air and dirt separators, glycol fill tanks and compressed air receivers, fall under the DNREC Boiler Safety Program when they exceed its exemptions. Regulation 1353 exempts ambient-temperature water vessels and expansion tanks of 120 gallons or less, so the large expansion tanks on a campus chilled water system are registered with the Boiler Safety Program by the installer before operation and carry a certificate on a four-year cycle. The pressure vessel fabrication in Delaware page covers the vessels Paul Industries builds to ASME Section VIII for that service.
Refrigeration and HVAC work carry a state license requirement. Under 24 Del. C. Section 1820, HVACR services in Delaware are performed under a master HVACR or master HVACR restricted license, a requirement that reaches chillers, computer room air conditioners, hydronic piping and refrigerant work. Building, mechanical and plumbing permits come from the county or the municipality, and county codes track the state’s adopted energy code within a year of its adoption. Delaware mechanical contractors therefore file in three places on most jobs: the county or city for construction permits, DNREC for air, tank and pressure vessel records, and the Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners for the license requirement on the work.
Prevailing wage on public data center work in Delaware
Prevailing wage applies to Delaware data center work when the project is funded in whole or in part by the State or a political subdivision and exceeds $500,000 for new construction or $45,000 for alteration, repair or renovation, under 29 Del. C. Section 6960. That covers computer rooms for state agencies, county governments, school districts and public universities, including research computing rooms. Rates are set by the Delaware Department of Labor’s Division of Industrial Affairs, and payroll records for the job are kept to the Department’s requirements throughout the work.
Private colocation, enterprise and campus projects funded without public money sit outside that statute, though a project that receives public grants or infrastructure money is reviewed against it. Paul Industries prices public and private work on the correct basis from the first estimate, so the owner sees the labor basis before the scope is fixed.
Building on industrial and brownfield land in Delaware
Industrial and brownfield land is where many Delaware data center sites end up, because the county ordinances favor industrial zoning and the buffer rules push sites away from homes. The former Reichhold Chemical plant north of Dover is one example that Kent County’s vote left open for data center use. Inside the Coastal Zone, the 2017 Coastal Zone Conversion Permit Act allows new heavy industry only at 14 sites that were operating in 1971, through a DNREC conversion permit, while reuse that is not heavy industry needs no conversion permit; Project Washington showed that DNREC weighs generation and fuel storage in deciding which category a data center falls into.
Brownfield sites bring buried utilities, old foundations, contaminated soils and existing tanks into the mechanical plan. Paul Industries surveys existing piping and tanks before design, plans the removal or reuse of old utility runs, and routes new chilled water and fuel lines around areas under environmental controls. On a reused building, the structure’s load limits and roof capacity often decide whether heat rejection sits on the roof or in a yard.
Prefabrication and phasing for Delaware data halls
Prefabrication suits Delaware data halls because most projects here are single buildings or modest campuses built in phases, where repeatable piping modules, pump skids and pipe racks cut field time on a site with tight buffers and noise limits. Paul Industries prefabricates headers, risers, CDU branch assemblies and pump skids off site, pressure tests them before shipment, and sets them in planned sequences that keep field welding and noisy work inside the permitted hours.
Phasing matters as much as fabrication. Mains sized for the full build, valved and capped branch connections, and space reserved for future chillers or dry coolers let a later phase connect without shutting down halls already in service. The planning for those connections, and the commissioning of each phase, are covered on the data center commissioning in Delaware page; the liquid side of high-density rooms, including the artificial intelligence workloads now arriving in Delaware’s financial and research sectors, is covered under data center liquid cooling in Delaware.
Retrofitting live computer rooms in Delaware
Retrofitting a live computer room is a frequent data center mechanical job in Delaware today, because many data centers in Delaware are rooms inside bank and card operations, hospitals, research buildings and state agencies rather than stand-alone campuses. Typical scopes add liquid cooling to a room built for air, replace chillers that have reached the end of their service, extend chilled water mains to new rows, or add a second loop to remove a single point of failure.
Every one of those jobs happens around running servers. Paul Industries surveys the existing plant and piping, writes a method of procedure for each tie-in, freezes or hot-taps lines where a shutdown is unacceptable, and stages temporary cooling where the room has no spare capacity. Work inside the room is sequenced row by row, with leak detection and drip protection in place before any wet work begins, and every change is pressure tested and flushed before it joins the live system. When an older chiller is the weak link, the work often starts with chiller repair in Delaware to buy time while the replacement is planned, while the new piping is welded or grooved, tested and flushed to the same standard as a new hall.
Who builds the cooling, piping and fuel systems for Delaware data centers?
Paul Industries builds data center mechanical systems in Delaware, designing, fabricating, installing, testing and servicing cooling plants, chilled water and liquid cooling piping, generator fuel systems, tanks and pressure vessels for owners, developers and general contractors across New Castle, Kent and Sussex counties. Among the mechanical companies in Delaware markets, Paul Industries brings the cooling, piping, fuel and vessel scope under one contract, with one schedule and one set of turnover records.
Headquartered in Kilmarnock, Virginia, Paul Industries also works as a data center mechanical contractor in Virginia, and across the rest of the Mid-Atlantic, including data center mechanical work in Maryland. For owners comparing mechanical contractors in Delaware, the questions that matter are whether the contractor reads the county ordinance into the design, carries the DNREC generator, tank and vessel paperwork, and delivers prefabricated work that shortens noisy field time. Paul Industries answers each of those in its proposal.
Data center mechanical cost drivers in Delaware
Data center mechanical cost in Delaware is driven by the cooling technology the site rules allow, the IT load and redundancy level, the share of liquid cooling, the size of the generator fuel system, the site’s condition, the labor basis, and the acoustic measures needed to meet a buffer. A closed-loop air-cooled or dry cooler plant trades water savings for more equipment and electrical load than an open tower plant, and that trade shows up in both first cost and the power bill.
Schedule is a cost driver of its own. Chillers, dry coolers, generators, large pumps and switchgear carry long manufacturing lead times, and a Delaware project also waits on the county or municipal land use decision, building permits, the DNREC generator registration and construction permit, and tank registration before fuel is delivered. Paul Industries lays those approvals and lead times into one schedule at the estimate stage, orders long-lead equipment as soon as the owner releases it, and uses prefabrication to recover field time once permits arrive. Owners who release equipment early and fix the cooling concept before land use hearings usually see the shortest path from approval to a cooled hall.
Paul Industries prices a Delaware mechanical package from the load, the redundancy, the site plan and the rule in force where the site sits, gives a budget range from comparable scope early, and firms the price once the design is fixed. To start, send the IT load and phasing, the cooling concept, the generator count and fuel autonomy, the site location and zoning, and whether public funding is involved. Call 201-450-8280 or request a quote.
Delaware data center mechanical work, start to finish, from Paul Industries
Paul Industries designs, prefabricates, installs, tests, starts up and services the mechanical systems of data centers in Delaware, from Wilmington, Newark and New Castle to Middletown, Dover and Sussex County, and its data center work reaches all 50 states and sites abroad. The Delaware hub gathers every Paul Industries service in the state, from process piping and boilers to high-purity water.
Standards referenced: New Castle County data center ordinance (March 2026) · Kent County data center ordinance (July 2026) · Delaware Coastal Zone Act and Coastal Zone Conversion Permit Act · 7 DE Admin Code 1144 Control of Stationary Generator Emissions · 7 DE Admin Code 1102 air permits · 7 DE Admin Code 1352 Aboveground Storage Tanks (7 Del. C. Chapter 74A) · 7 DE Admin Code 1351 Underground Storage Tank Systems · 7 Del. C. Chapter 74B and 7 DE Admin Code 1353 Boiler Safety Regulations · 24 Del. C. Chapter 18 (master HVACR license) · 29 Del. C. 6960 (Delaware prevailing wage) · ASME B31.9 and B31.3 · ASHRAE TC 9.9 Thermal Guidelines · NFPA 30 and NFPA 110
Frequently asked questions
Which mechanical contractor builds data center cooling and piping in Wilmington and northern New Castle County?
Paul Industries builds data center cooling plants, chilled water and liquid cooling piping, and generator fuel systems in Wilmington, New Castle, Newark and the rest of northern New Castle County. Work there ranges from computer rooms in bank and card operations to colocation buildings and new halls under the county’s 2026 ordinance. Paul Industries designs to the ordinance’s closed-loop and buffer rules and carries the DNREC permits and records through turnover.
Does Paul Industries take data center mechanical work in Middletown, Smyrna and southern New Castle County?
Yes. Paul Industries takes data center mechanical work in Middletown, Townsend, Smyrna and across southern New Castle County, where industrial land and large distribution sites draw interest from data center developers. A data center in Middletown, Delaware was approved by the town in the mid-2010s with its own gas-fired plant, and newer projects in the area are reviewed under the county’s 2026 rules. Paul Industries builds the cooling, piping and fuel systems to those rules.
Who handles data center mechanical systems in Dover, Kent County and Sussex County?
Paul Industries handles data center and computer room mechanical systems in Dover, Camden, Milford, Georgetown, Seaford and the rest of Kent and Sussex counties, for hospitals, state agencies, schools and private owners. New data center permits in Dover are paused under the city’s 18-month moratorium, and Kent County’s ordinance governs unincorporated land. Expansions of existing computer rooms continue under the normal building and mechanical permits.
Is a data center being built in Delaware right now?
As of late 2026, the large proposals had stalled: Project Washington near Delaware City was ruled out under the Coastal Zone Act, Harrington rejected a 24 MW plan, and Dover paused new permits. Existing colocation, enterprise and research computer rooms continue to expand. Paul Industries works on those expansions and on new rooms that fit the county rules, and tracks each jurisdiction’s current position at the start of an estimate.
Why was the data center in Newark, Delaware cancelled?
The 2014 plan on the University of Delaware’s STAR Campus paired up to 900,000 square feet of data center space with a 279 MW cogeneration power plant, and opposition centered on the power plant’s emissions. The university ended the developer’s lease in July 2014 after a review group recommended against it. The episode still shapes Delaware debate, and on-site generation remains the part of a data center plan that draws the hardest scrutiny.
What does New Castle County's open-loop cooling ban mean for a new data center?
New Castle County’s 2026 ordinance prohibits open-loop cooling for data center applications filed after enactment, so new plants rely on closed-loop heat rejection such as air-cooled chillers, dry coolers and closed-circuit fluid coolers. Those systems use far less water but take more yard space, fan power and acoustic treatment. Paul Industries checks the design against the ordinance’s definitions before equipment is selected and sizes trim cooling for the hottest days.
How far must a data center sit from homes in Delaware?
In unincorporated New Castle County, a new data center needs a 1,000-foot buffer from residential zones, day care centers and schools, reducible to 500 feet with a site-specific noise study. In unincorporated Kent County the buffer is 300 feet with a 6-foot vegetative screen and a noise limit. Cities such as Dover and Harrington set their own rules. Mechanical equipment noise is often what decides whether the reduced buffer is reachable.
Do diesel generators at a Delaware data center need an air permit?
Every stationary generator in Delaware is registered with DNREC under Regulation 1144, and emergency generators larger than 450 kW, as well as any non-emergency generator, also need a Regulation 1102 construction permit. Testing and maintenance runs are barred on Air Quality Alert days. Paul Industries builds the fuel systems and generator piping to suit those rules and provides the equipment data the permit applications need.
Which rules govern diesel storage tanks on a Delaware data center campus?
Aboveground diesel tanks fall under 7 DE Admin Code 1352, which implements the Jeffrey Davis Aboveground Storage Tank Act, and underground tanks fall under 7 DE Admin Code 1351, both administered by the DNREC Tank Management Section. NFPA 30 and NFPA 110 add fire code and emergency power requirements. Paul Industries fabricates and installs double-wall tanks, containment, overfill protection, leak detection and fuel piping, and assembles the registration records.
Do chilled water expansion tanks on a Delaware data center need state registration?
Expansion tanks and ambient water vessels larger than 120 gallons fall outside the Boiler Safety Regulations’ exemptions, so the larger tanks on a campus chilled water or glycol system are registered with the DNREC Boiler Safety Program before operation and inspected on a four-year certificate cycle. Paul Industries supplies ASME Section VIII tanks and separators with their data reports and completes the registration as part of installation.
When is Delaware prevailing wage owed on computer room and data center work?
Prevailing wage under 29 Del. C. 6960 applies when the State or a political subdivision funds the project in whole or in part and the work exceeds $500,000 for new construction or $45,000 for alteration or repair. Computer rooms for state agencies, school districts and public universities usually qualify. Privately funded data centers sit outside the statute unless public money is involved. Paul Industries prices each job on the correct labor basis from the start.
Can a data center go on a former industrial site in Delaware's Coastal Zone?
The Coastal Zone Act bars new heavy industry in the zone, and the 2017 Conversion Permit Act allows heavy industry only at 14 sites operating in 1971, through a DNREC conversion permit. A use that is not heavy industry needs no conversion permit, and DNREC decides which category a project falls into. The Project Washington ruling turned on its 516 diesel generators and its fuel storage, so generation strategy is central to any Coastal Zone site.
How are artificial intelligence racks in Delaware cooled differently from older computer rooms?
Racks for artificial intelligence training and inference run far denser than the enterprise racks in older Delaware computer rooms, so most of their heat leaves through liquid cooling: cold plates fed by coolant distribution units and a facility water loop, with air handling for the remainder. Warm facility water suits closed-loop dry coolers under New Castle County’s rule. Paul Industries pipes the facility loop, CDU connections and heat rejection as one system.
What does a Delaware data center proposal need from the mechanical contractor before approval?
A Delaware data center proposal needs a cooling concept that meets the county rule, equipment noise data for the buffer study, a water demand figure for the water provider’s letter in Kent County, a peak electrical load for the cooling plant, and a generator and fuel storage plan for DNREC. Paul Industries prepares that mechanical information early so the land use application and the design tell the same story.
How do Delmarva Power's large-load rules affect a data center cooling plant?
Laws signed in August 2026 direct Delmarva Power to create a separate, higher rate for hyperscale data centers and ask large facilities to reduce use during peak demand and draw part of their backup power from clean sources. Cooling plant efficiency and the ability to shed load therefore carry a direct price. Thermal energy storage, warmer water temperatures and free cooling hours all help, and Paul Industries designs and installs them.
Which parts of a Delaware data hall's piping does Paul Industries prefabricate?
Yes. Paul Industries prefabricates chilled water headers, risers, CDU branch assemblies, pump skids and pipe rack modules off site, pressure tests them, and delivers them in installation sequence. On Delaware sites with tight buffers and noise limits, prefabrication shortens loud field work. Paul Industries also supplies prefabricated modules on a supply-only basis for an owner’s own installation schedule.
What records does a Delaware owner receive at mechanical turnover?
A Delaware owner receives pressure test and flushing records, weld and material records, as-built drawings, equipment data and startup reports, Boiler Safety Program registrations for expansion tanks and receivers, tank registration and leak detection records, generator equipment data for the DNREC registration, refrigerant records for chillers, and the operation and maintenance manuals. Paul Industries assembles them into one turnover package.
Are Delaware mechanical contractors needed for both new halls and retrofits?
Yes. New halls bring the full cooling plant, piping and fuel scope, while retrofits in Wilmington office buildings, research centers and existing colocation sites add liquid cooling, replace aging chillers, extend mains and reinforce redundancy inside operating rooms. Paul Industries delivers both, and on retrofits works under written methods of procedure so live rooms keep cooling throughout the work.
Planning data center mechanical work in Delaware?
Send the IT load and phasing, the cooling concept, the site location and zoning, and the generator and fuel plan. Call 201-450-8280 or request a quote.
