Paul Industries is a US process equipment contractor for Austria that engineers and fabricates skids, pressure vessels, tanks, sanitary piping and complete process systems for Austrian pharmaceutical, biotech, chemical and food plants, ships them by sea to Hamburg or Koper and on by rail, and installs, starts up and commissions them at the plant or supervises the installation. Each pressure part is designed and recorded to the Pressure Equipment Directive as Austria applies it through the Druckgeraetegesetz, with German-language instructions and electrical design for 230/400 V at 50 Hz. Austrian projects are led from Paul’s Kilmarnock, Virginia headquarters.
Request a quote or call 201-450-8280
What a US process equipment contractor for Austria takes on
A US process equipment contractor for Austria takes on more than fabrication, because a landlocked destination adds a rail or barge leg, and Austrian law adds an inspection by an authorised boiler inspection body before higher-hazard equipment starts trial operation. Paul Industries plans both from the start. The equipment covers purified water and WFI systems, clean steam generators, bioreactor and media systems, pump and dosing skids, pressure vessels and sanitary process piping, delivered as tested modules.
Austrian buyers choose from three routes. Under supply with supervision, the equipment is designed, built, tested and shipped by Paul, whose engineers then supervise setting, tie-ins and start-up. A design-build contract extends to the process and utility design for the room or building. Complete installation keeps Paul responsible from unloading through qualification, so the plant accepts a running system with signed records. The international overview shows the full list of countries Paul serves.
Pharmaceutical companies in Austria and their biologics, plasma and antibiotic plants
Pharmaceutical companies in Austria run large biologics, plasma fractionation and antibiotic sites, and each buys water systems, clean utilities, bioprocess equipment and CIP circuits on a large scale. The pharmaceutical industry in Austria is part of a life sciences sector that the national Life Science Report 2024 put at 1,174 companies, about 40 billion euros in revenue and about 73,400 employees. Boehringer Ingelheim opened its Large Scale Cell Culture plant in Vienna on 6 October 2021, an investment of more than 700 million euros with 185,000 litres of bioreactor capacity and about 500 jobs.
Austrian pharmaceutical companies and the international groups producing in the country both lean toward biologics and blood products. Takeda employs about 4,500 people in Austria at sites in Vienna, Linz and Orth an der Donau, centred on plasma-derived therapies. Octapharma runs its Vienna plant with about 1,500 staff after a 200 million euro expansion. Plasma fractionation calls for jacketed process tanks, chilled glycol, filtration and validated cleaning, the work covered on the biotech industry page.
Pharmaceutical companies in Vienna and biotech in Vienna
Pharmaceutical companies in Vienna form the core of the country’s life sciences cluster: the city’s life sciences agency counts 646 companies with more than 49,000 employees. Biotech in Vienna spans commercial biologics production, plasma products and a deep pool of early-stage developers whose first clinical manufacturing suites need small bioreactor trains, media and buffer preparation, purified water and clean steam. Biotech companies in Austria that move from clinical to commercial supply often step up to stainless systems at that point, which is where a fabricated, documented skid replaces single-use benches.
Tyrol: antibiotics and biologics at Kundl and Schaftenau
Tyrol hosts the Kundl and Schaftenau sites in the Inn valley. Sandoz opened a 150 million euro penicillin production plant at Kundl on 10 November 2023, supported with public funding to keep antibiotic production in Europe. Novartis announced about 500 million euros for biologics in Tyrol in February 2024, and its new biologics plant at Kundl opened in October 2025. Fermentation, recovery and purification of antibiotics need large fermenters, solvent recovery, crystallization and drying, while biologics need the cell culture, purification and clean utility systems described on the pharmaceutical industry page.
Biologics and plasma process systems for Austrian plants
Biologics and plasma process systems for Austrian plants share a set of utilities and process skids that Paul Industries designs as one package, so that water, steam, cleaning and process equipment are qualified against the same user requirements. A cell culture plant needs media and buffer preparation vessels, hold tanks, transfer panels and harvest equipment; a plasma fractionation plant needs cold processing tanks with chilled jackets, precipitation and filtration steps, and solvent and ethanol handling rated for explosive atmospheres. Both run on purified water, water for injections, clean steam and clean-in-place circuits.
Design decisions on these systems are made early and are hard to change later. Vessel jackets, agitators and spray devices are sized for the cleaning cycle as well as for the process. Distribution loops are laid out without dead legs, with sloped lines and drain points that pass riboflavin coverage and drainability tests. Steam-in-place paths are planned so every product-contact surface reaches sterilizing temperature, with temperature mapping points designed into the piping. Paul fixes those details in the design qualification so the factory test in the United States and the site qualification in Austria check the same requirements.
Working inside an operating Austrian GMP plant
Installation work inside an operating Austrian GMP plant runs under the site’s permit-to-work system, its gowning and segregation rules and its change control procedures. Paul prepares method statements, risk assessments and lifting plans in German for approval before the crates arrive, coordinates tie-ins with the plant’s production schedule, and keeps weld logs, pressure test records and as-installed markups in the plant’s own document format. Where a new system connects to an existing validated loop, Paul writes the change documentation and the requalification tests with the plant’s quality unit, so the existing system returns to service with its validated state confirmed.
Chemical companies in Austria and food and beverage processors
Chemical companies in Austria concentrate at Linz on the Danube and at Schwechat outside Vienna, where refining, polymers, fertilizers and specialty chemicals share utilities and logistics. The Chemiepark Linz hosts Borealis, the nitrogen fertilizer and melamine producer LAT Nitrogen, the crop protection maker Nufarm and a Takeda plant. At Schwechat, the OMV refinery processes about 9.6 million tonnes of crude oil a year, and Borealis announced in September 2025 an investment of more than 100 million euros in polymer compounding there. Those plants buy pressure vessels, heat exchanger packages, chemical dosing and ATEX-rated skids, covered on the chemical manufacturing page.
Austrian food and beverage plants add hygienic process work. AGRANA produces sugar at Tulln, corn starch at Aschach and bioethanol at Pischelsdorf, and beverage fillers in Vorarlberg run high-speed lines that depend on CIP, water treatment and product cooling. Pharmaceutical manufacturing companies in Austria and food producers share the same need for drainable stainless piping, sanitary pumps and validated cleaning.
Which rules apply to pressure equipment in Austria?
Pressure equipment in Austria is governed by the Druckgeraetegesetz (DGG), Federal Law Gazette I No. 161/2015, which implements the Pressure Equipment Directive 2014/68/EU, and by the Duale Druckgeraeteverordnung (DDGV) of 2016, which sets out the detailed rules for pressure equipment and simple pressure vessels. The old Kesselgesetz expired on 19 April 2016, when the main DGG provisions took effect. A US-built vessel is therefore classified, assessed under the module for its category, CE marked and supplied with an EU declaration of conformity, exactly as for any EU member state.
Austrian law adds a language requirement: section 9 of the DGG calls for instructions and safety information in German when equipment is to be put into service in Austria, and importers and distributors carry the same duty. Paul Industries supplies the operating, maintenance and safety documents in German, with English copies for engineering staff.
The DGUeW-V: inspections before and during operation
The Druckgeraeteueberwachungsverordnung (DGUeW-V), Federal Law Gazette II No. 420/2004 as amended in 2015, sets the inspections pressure equipment needs once it is installed. For higher-hazard equipment, a Kesselpruefstelle, an authorised boiler and pressure equipment inspection body, carries out the first operational inspection when trial operation begins. That inspection checks the documentation and marking, the installation, the external condition and the function of the equipment. Lower-hazard equipment is checked periodically by a competent person at intervals the operator sets from the manufacturer’s instructions.
| Inspection | Equipment | Interval or timing | What Paul builds in |
|---|---|---|---|
| First operational inspection | Higher-hazard pressure equipment | At the start of trial operation | German documents, declaration of conformity, marking and installation records in one indexed file |
| External inspection | Pressure vessels, inspection level 1 | Every 3 years | Visible nameplates, accessible safety valves and level devices |
| Internal inspection and pressure test | Pressure vessels, inspection level 1 | Every 12 years | Manways or inspection openings, drains, test connections and blind flanges |
| External, internal and main inspection | Steam boilers at inspection level 2 | Yearly, every 3 years and every 9 years | Access to burner safety devices, water level controls and boiler internals |
| Re-inspection | Equipment relocated or out of service for more than a year | Before restart | Records that let the inspection body confirm condition quickly |
| Periodic check | Lower-hazard equipment | Set by the operator from the manufacturer’s instructions | Recommended intervals written into the German manual |
The inspection level assigned to each item sets its cycle, so Paul records the classification and the recommended inspection points in the manual and on the drawings. Plants that move a skid from another site into Austria should expect the re-inspection rule to apply.
Machinery and electrical rules for Austrian plants
Machinery and electrical rules for Austrian plants follow the EU texts, with Austrian electrical installation practice set by OVE E 8101. Skids with drives fall under the Maschinen-Sicherheitsverordnung 2010, Austria’s implementation of the Machinery Directive 2006/42/EC, and from 20 January 2027 new machinery follows Regulation (EU) 2023/1230 in place of the directive. Control panels follow IEC 60204-1. Under the Elektrotechnikgesetz and the Elektrotechnikverordnung 2020, applying OVE E 8101:2019 gives a presumption that the installation meets the statutory safety requirements.
What is the voltage in Austria?
Austria supplies electricity at 230/400 V and 50 Hz, so three-phase industrial equipment runs at 400 V between phases with 230 V to neutral. Voltage in Austria vs USA plants changes two things on a skid: motors and drives move from 480 V or 208 V to 400 V, and pumps selected on 60 Hz curves turn about 17 percent slower at 50 Hz, losing flow and head. The voltage in Austria also sets heater ratings and control transformer taps. Paul selects motors, pumps and drives on 50 Hz data and builds panels to IEC practice with metric conductor sizes.
GMP inspection by BASG and AGES
The Federal Office for Safety in Health Care (BASG) is the competent authority for drug manufacturing in Austria, and inspectors from AGES Medicines Market Surveillance carry out GMP inspections on its behalf. Austrian manufacturers work under the Arzneimittelbetriebsordnung 2009 and EU GMP, and Austria has taken part in the PIC Scheme since November 1999. Water for injections and purified water follow the European Pharmacopoeia, and sterile products follow EU GMP Annex 1, including its contamination control strategy. Paul writes the user requirement specification and design qualification, then runs commissioning and validation on site with IQ and OQ records in the plant’s format.
Shipping to Austria from USA East Coast ports
Shipping to Austria from USA East Coast ports always combines an ocean leg to a seaport with a rail, road or river leg inland, because Austria has no coastline. Hamburg handled 308,000 TEU of Austrian container traffic in 2024 and runs about 40 container trains a week to Vienna, while the Slovenian port of Koper handled 6.85 million tonnes for Austria in 2021, including 232,000 TEU. Rotterdam and Bremerhaven serve Austrian cargo too. Paul chooses the gateway from the sailing, the plant location and the crate sizes.
| Gateway | Inland leg | Suited to | Point to check |
|---|---|---|---|
| Hamburg or Bremerhaven | Container train to Vienna, Linz or Enns terminals, then truck | Containerized skids and spools for plants in Vienna, Lower Austria and Upper Austria | Rail terminal handling of heavy containers and flat racks |
| Koper | Rail or truck through Slovenia into southern and western Austria | Plants in Styria, Carinthia and Tyrol | Alpine road gradients and tunnel clearances for oversized crates |
| Rotterdam or Antwerp | Rail, or barge on the Rhine, Main and Danube for heavy pieces | Large vessels and columns for Danube sites such as Linz and Vienna | Danube water levels in late summer |
| Any gateway, oversized load | Abnormal road transport under a provincial permit | Pieces too wide or tall for rail | Permit lead time and the weekend truck ban |
How to ship to Austria from USA ports with heavy equipment depends on the piece. The Danube carries project cargo: a 380 tonne reactor has left Linz by barge for Antwerp, and the Port of Vienna handles project shipments. Abnormal road transports need a permit from the governor of the province where the trip starts or enters Austria, and trucks over 7.5 tonnes are barred from Saturday 15:00 to midnight and on Sundays and public holidays from midnight to 22:00. Paul plans the route against the heaviest and widest crate before freezing the skid design.
Preparing equipment for the rail and transshipment legs
Equipment bound for Austria is handled more often than equipment bound for a coastal plant: loaded at the US port, discharged at Hamburg or Koper, lifted onto a rail wagon, lifted again at an inland terminal and finally set at the plant. Each lift and each shunting impact is a load case the crate and the skid frame have to survive. Paul designs skid frames with lifting points rated for the full crated weight, braces tall vessels and instrument stands against longitudinal shock, and fits shock and tilt indicators so the receiving team can see at once whether a crate was mishandled. Polished sanitary surfaces are capped and wrapped, rotating equipment is locked, and every crate is marked in German and English with weights, centres of gravity and lifting points.
Crate dimensions are also checked against the rail loading gauge on the chosen route and against the door and floor loading of the receiving building. A module that fits a high cube container and the plant’s door opening avoids the cost and permits of an abnormal road transport altogether, so the module split is decided at design stage rather than at shipping.
Customs, import VAT and Incoterms for an Austrian delivery
Austria applies the EU common customs tariff, and the Zollamt Oesterreich, the single national customs office since 1 January 2021, clears imports and collects import VAT at the standard rate of 20 percent. Duty on process equipment follows its tariff classification. When equipment is cleared at Hamburg or Koper and moved on under transit procedures, the Incoterm sets who arranges each step. Under EXW, FCA, CIF or DAP the Austrian buyer imports the goods; under DDP Paul handles clearance and lists duty and VAT as separate lines.
How an Austrian project with Paul Industries is organized
An Austrian project with Paul Industries is organized in eight stages, from a code and route review to service after the first operational inspection. The table shows each stage and the record it leaves.
| Stage | Work carried out | Record for the plant |
|---|---|---|
| 1. Code and route review | PED categories, DGUeW-V hazard classification, German documentation, gateway port and inland route | Code basis, classification list, transport study |
| 2. Design | Metric design to EN 13445 or ASME with PED assessment, 400 V electrical design, crate envelope for rail | P&IDs, general arrangement and calculations for approval |
| 3. Fabrication | Orbital and manual welding, assembly, wiring and passivation | Weld logs, NDT, surface finish and passivation records |
| 4. Factory acceptance test | Pressure, function and control tests, attended or by video | Signed FAT report |
| 5. Shipping | ISPM 15 crating, ocean freight, rail or barge leg, transit customs | Shipping file and crate drawings |
| 6. Installation or supervision | Setting and tie-ins at the Austrian plant | Installation records for the first operational inspection |
| 7. Start-up and qualification | Trial operation, Kesselpruefstelle inspection where required, SAT, IQ and OQ | Executed protocols and start-up report |
| 8. Handover and service | Training, German manuals, spare parts and service plan | As-built drawings, inspection calendar |
Who builds process systems for plants in Austria?
Paul Industries builds process systems for plants in Austria, from a single clean steam generator or CIP skid to complete water, bioprocess, tank and piping systems for pharmaceutical, biotech, chemical and food producers. Paul engineers the system, fabricates it in the United States, tests it, ships it through Hamburg, Koper or Rotterdam, and installs, starts up and commissions it at the Austrian plant or supervises the installation. The German documents and the records for the first operational inspection come from the team that built the equipment. Neighbouring markets are covered on the Germany page and the Switzerland page.
What drives the cost of a process equipment project in Austria?
The delivered cost of a process equipment project in Austria depends on the inland route, crating, code and inspection work, GMP documentation, import costs under the Incoterm and the installation route. Paul shows each as its own line in a quote in US dollars.
- Inland route. A container train from Hamburg costs less than an abnormal road transport, and Danube barges suit heavy pieces when water levels allow.
- Crating. Rail handling and transshipment call for robust ISPM 15 crates, shock indicators and preservation of polished surfaces.
- Code and inspection work. Notified body involvement for PED Category II to IV items, German documentation and preparation for the Kesselpruefstelle inspection add engineering hours.
- GMP documentation. Biologics and sterile plants need URS, design qualification and IQ and OQ protocols written to EU GMP.
- Import costs. The importer pays EU duty by tariff line plus 20 percent import VAT unless the order is DDP.
- Installation route. Supervision uses fewer Paul site hours, while complete installation keeps start-up and qualification with the builder.
Paul offers a budget range from comparable scope first, then a firm price when the scope, route and delivery term are fixed.
Paul Industries for Austrian pharmaceutical, biotech and chemical plants
Paul Industries, formerly based in northern New Jersey, then Pennsylvania, and today headquartered at 256 Shore Drive, Kilmarnock, Virginia, accepts Austrian process equipment projects next to its work in every US state. Paul engineers, fabricates, tests, ships, installs and commissions skids, vessels, tanks, piping and complete systems for Austrian biologics, plasma, antibiotic, chemical and food plants, built to the Pressure Equipment Directive and the DGG, documented in German and wired for 230/400 V. Send the scope, the plant address and your preferred Incoterm to request a quote.
Standards referenced: Pressure Equipment Directive 2014/68/EU · Druckgeraetegesetz (DGG), BGBl. I Nr. 161/2015 · Duale Druckgeraeteverordnung (DDGV), BGBl. II Nr. 59/2016 · Druckgeraeteueberwachungsverordnung (DGUeW-V), BGBl. II Nr. 420/2004 · Maschinen-Sicherheitsverordnung 2010 · Machinery Directive 2006/42/EC · Elektrotechnikverordnung 2020 · OVE E 8101:2019 · IEC 60204-1 · EN 13445 · EN 13480 · Arzneimittelbetriebsordnung 2009 · EU GMP Annex 1 · European Pharmacopoeia · Incoterms 2020 · ISPM 15
Frequently asked questions
Does a US-built vessel need CE marking for a plant in Austria?
A US-built vessel needs CE marking for an Austrian plant whenever it falls in Categories I to IV of the Pressure Equipment Directive, which Austria applies through the Druckgeraetegesetz. Equipment below Category I is built to sound engineering practice without the mark. Paul Industries classifies every pressure part during design, completes the conformity assessment for its category and supplies the declaration of conformity with the vessel.
Which documents does the Kesselpruefstelle review when trial operation starts?
At the first operational inspection the Kesselpruefstelle checks the documentation and marking, the installation, the external condition and the function of the equipment when trial operation begins. Missing German instructions or an incomplete declaration of conformity delay start-up. Paul Industries assembles the German documents, test records and installation records in one indexed file before the inspector arrives.
Are German operating instructions mandatory for pressure equipment in Austria?
Section 9 of the Druckgeraetegesetz requires instructions and safety information in German for pressure equipment put into service in Austria, and the duty extends to importers and distributors. Machinery manuals follow the same language principle under the machinery rules. Paul Industries supplies operating, maintenance and safety documents in German, with English copies for engineers who prefer them.
What is the voltage in Austria for a skid motor and panel?
Austrian plants supply 400 V three-phase with 230 V to neutral at 50 Hz, so skid motors are wound for 400 V, pumps are chosen on 50 Hz curves and control transformers are tapped for 230 V. Panels follow IEC 60204-1 with metric conductor sizes. Paul Industries confirms the supply at the plant’s distribution board and wires the skid to match.
How long does shipping from USA to Austria take?
Carrier data puts the US East Coast to Hamburg or Bremerhaven crossing at about 9 to 12 days port to port, before the rail leg to Vienna, Linz or Enns, customs and delivery to the plant. Routes through Koper or Rotterdam and barge legs on the Danube take longer. Paul Industries books the full door-to-door route once crate sizes are fixed and plans the factory test against the sailing.
Which pharmaceutical companies in Vienna buy process systems?
Vienna’s drug producers include large-scale biologics manufacturing at Boehringer Ingelheim, plasma products at Takeda and Octapharma, and a large number of developers moving toward clinical and commercial production. Those plants buy WFI and purified water systems, clean steam, bioreactor and media skids, CIP and process tanks. Paul Industries builds that equipment to EU GMP and installs and qualifies it on site.
Can Paul Industries deliver WFI loops and clean steam to Inn valley sites such as Kundl?
Paul Industries designs, builds and qualifies WFI stills or membrane trains, hot and ambient distribution loops and clean steam generators for antibiotic and biologics producers in the Inn valley, Kundl and Schaftenau included. Water quality is set against the European Pharmacopoeia, sterile design against EU GMP Annex 1, and stills and exchangers are classified under the directive. Module sizes are fixed only after the Alpine road leg has been surveyed.
Can Paul Industries supply ATEX-rated skids to chemical plants in Linz or Schwechat?
Paul Industries designs and fabricates chemical dosing, transfer and heat exchanger skids rated for explosive atmospheres for chemical and refining sites in Linz and Schwechat. Motors, instruments and enclosures are selected for the zone classification under the ATEX Directive, and pressure parts follow the Pressure Equipment Directive. Paul ships the skids, sets them and commissions them on site.
Can a heavy vessel reach a Danube plant by barge?
Heavy vessels reach Danube plants by barge through the Rhine, Main and Danube waterway, and the Port of Linz has shipped a 380 tonne reactor to Antwerp the same way. Low water in late summer limits barge draught, so delivery windows are checked against the season. Paul Industries designs large vessels with lifting lugs, saddles and transport frames suited to barge and crane handling.
Which permits are needed to move an oversized skid by road in Austria?
An oversized or overweight skid moves on Austrian roads under an abnormal transport permit from the governor of the province where the trip starts or enters Austria, with route conditions set in the permit. Trucks over 7.5 tonnes also observe the weekend ban from Saturday afternoon to Sunday night. Paul Industries applies the route limits to the crate design and schedules deliveries around them.
How is Austrian import VAT settled on a US shipment?
Austrian import VAT, charged at 20 percent, is collected by the Zollamt Oesterreich from whoever imports the goods, and a VAT-registered plant normally reclaims it as input tax. With EXW, FCA, CIF or DAP terms that party is the Austrian plant. With DDP, Paul Industries takes on clearance, duty and the VAT payment and shows each as its own figure, giving the finance team the full landed cost.
What inspection cycle applies to an Austrian pressure vessel under the DGUeW-V?
Pressure vessels at inspection level 1 under the DGUeW-V receive an external inspection every three years and an internal inspection and pressure test every twelve years, while steam boilers follow shorter cycles. The inspection level depends on the equipment’s hazard. Paul Industries records the classification in the documentation and builds access, drains and test connections into each vessel so inspections fit planned shutdowns.
Do biotech companies in Austria buy stainless systems from US fabricators?
Biotech companies in Austria buy process equipment internationally and choose on design, documentation and delivery rather than on where the equipment was built. A US-built media preparation skid, buffer hold system or WFI loop is accepted once it meets the Pressure Equipment Directive, the machinery rules and EU GMP. Paul Industries builds to all three and qualifies the system at the Austrian plant.
Can Austrian engineers attend the factory acceptance test?
Austrian engineers, QA reviewers and the plant’s project lead are welcome at the shop test in the United States, or they follow it remotely on video with live readings. Witness points are agreed in the protocol beforehand. Paul Industries schedules pressure tests, control sequences and documentation review so a visiting team covers the critical items in one trip and signs the protocol before crating.
Which gateway port suits a plant in Graz or Carinthia?
Plants in Graz, elsewhere in Styria and in Carinthia often receive equipment through Koper on the Adriatic, with rail or road through Slovenia, while plants in Vienna and Upper Austria more often use Hamburg and a container train. The choice depends on the sailing, the crate size and the final road leg. Paul Industries compares both routes before booking.
What should an Austrian plant send to receive a price from Paul Industries?
An Austrian plant receives a price from Paul Industries by sending the process requirements or P&IDs, the plant address and unloading conditions, the available utilities, the GMP classification if any, the preferred design code, the delivery term and whether Paul installs or supervises. Paul then returns a code review, a transport study and a budget range in US dollars, and later a fixed contract price.
Planning process equipment for a plant in Austria?
Share the process, the Austrian plant address and the delivery term you want, and Paul Industries will map the route, the inspection steps and an indicative budget. Call 201-450-8280 or request a quote.
