Paul Industries is a US process equipment contractor for Jamaica that designs, fabricates and commissions 50 Hz process skids, steam boilers and distribution, heat exchangers, fermentation and storage tanks, water treatment and cooling systems for rum distilleries, breweries, food and poultry plants, alumina refineries and energy sites, and ships them to Kingston. Jamaica runs its grid at 50 Hz, unlike the United States, so Paul builds every motor, drive and compressor for the Jamaican supply before the equipment leaves the factory, and documents it in English. Every system is installed and brought on line by Paul, or set under Paul’s supervision, and the company directs Jamaican work from its headquarters at 256 Shore Drive, Kilmarnock, Virginia; it was formerly based in northern New Jersey and then Pennsylvania.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Supply 50 Hz; 415/240 V star or 220 V delta three-phase
Electrical code JS 316:2017, application document for NFPA 70
Boilers Factories Act and Factories Regulations 1961
Main ports Kingston Freeport Terminal, Montego Bay, Port Esquivel
Language English
Reviewed November 2026

What one contract covers with a US process equipment contractor for Jamaica

A single contract with a US process equipment contractor for Jamaica covers the engineering, fabrication, factory testing, export packing, shipment and start-up of process systems for Jamaican plants, with one set of records at the end. Paul Industries builds the equipment Jamaican plants order most: steam and condensate systems for distilleries and food plants, heat exchangers for fermentation, pasteurizing and refinery service, fabricated tanks for molasses, wash and spirit storage, industrial water treatment for boiler feed and process water, and process chillers for brewing, poultry and dairy lines.

Jamaican owners pick from three routes. Supply with supervision fits a plant whose own expansion schedule is already running, with Paul directing how its equipment is placed, connected and proven. Design-build adds the plant room, utility runs and controls around the new equipment. Complete installation gives Paul every task from the Kingston quay to the performance run. Whatever the route, the plant receives English manuals, as-built drawings and a single service contact. The international projects page shows the other countries where Paul delivers systems.

Jamaica manufacturing industry: which plants buy process systems?

The Jamaica manufacturing industry that buys process systems centers on rum and spirits, beer and beverages, food and poultry processing, sugar, bauxite and alumina, and petroleum refining and power. Mining and quarrying alone produced about 45 percent of domestic export revenue in 2024, and food and drink plants around Kingston, St Catherine and Clarendon account for many of the island’s process sites. Each of these sectors runs on steam, cooling water, refrigeration, tanks and pumps, and many are replacing or upgrading equipment after Hurricane Melissa, the Category 5 storm that came ashore on the south-west coast on 28 October 2025.

Jamaican parishes, their process plants and the systems Paul supplies
Parish or areaPlantsSystems Paul Industries builds
Kingston and St AndrewBrewing, food canning, petroleum refining, beveragesGlycol chillers, CIP, retort steam, heat exchangers, tank farms
St CatherinePoultry processing, rum at Worthy Park, sugar, alumina at EwartonAmmonia refrigeration, scalding water and steam, process water, slurry pumps
ClarendonAlumina refining, rum, food processingHeat exchangers, pressure vessels, cooling water, caustic service piping
St ElizabethRum distilling at Appleton Estate, food processingFermentation and spirit tanks, steam boilers, effluent treatment
Trelawny and the north coastRum at Hampden Estate, hotels and resort utilitiesPot still utilities, water treatment, chilled water
Westmoreland and Montego BaySugar at Frome, food plants, free zone tenantsBoiler feed systems, evaporator support, process cooling

Rum distilleries and breweries

Rum, Jamaica’s signature spirit, is made at Appleton Estate in St Elizabeth, Hampden Estate in Trelawny and Worthy Park in St Catherine, among others, from molasses fermented in open or closed vessels and distilled in pot and column stills. Distilleries buy fermentation and storage tanks, wash and dunder handling, heat exchangers, steam boilers and distribution, cooling water and effluent treatment. Red Stripe is brewed on Spanish Town Road in Kingston, where brewing calls for glycol chillers, CIP, CO2 handling and bright beer tanks. Paul’s distilling and brewing page explains how those systems connect.

Food, poultry and sugar processing

Food processing in Jamaica spans canning in Kingston and plants at Denbigh in Clarendon, Hounslow in St Elizabeth and Savanna-la-Mar, alongside poultry processing at Spring Village in St Catherine, which moved to on-site LNG power in 2025. Sugar factories still operating include Frome in Westmoreland and Worthy Park in St Catherine. These plants order retort and blanching steam, ammonia and glycol refrigeration, CIP, wash water treatment and wastewater systems, covered on Paul’s food and beverage and meat and poultry pages.

Alumina, refining and power

Two alumina refineries operate in Jamaica, Jamalco in Clarendon and Windalco at Ewarton in St Catherine, and both use the Bayer process, with digesters, heat exchangers, flash tanks, slurry pumps and large cooling water systems in caustic service. Petrojam runs a hydroskimming refinery in Kingston with a design capacity of about 36,000 barrels a day. Paul fabricates pressure vessels, heat exchanger bundles, pipe spools and pump skids for those duties, described on its oil and gas page.

Rebuilding and hardening plants after Hurricane Melissa

Plants in St Elizabeth, Westmoreland and the south-west took the heaviest damage from Hurricane Melissa, and the rum industry reported a double-digit drop in expected output for the 2025 to 2026 season. Repair and replacement work at those sites goes beyond like-for-like swaps: owners are moving electrical gear above flood levels, replacing corroded skids with stainless or hot-dip galvanized frames, adding standby generation and fuel systems, and choosing equipment that restarts cleanly after a long outage. Paul designs replacement systems with those goals written into the specification, including raised panels, sealed motor enclosures, restart sequences in the controls and anchorage checked against the owner’s wind loads.

Jamaica voltage and frequency: what changes on a US-built skid?

Jamaica voltage and frequency differ from US practice in the most important respect: the JPS grid runs at 50 Hz, while American equipment is built for 60 Hz. For anyone asking what is the voltage in Jamaica, the JPS tariff gives single-phase service at 110 V or 110/220 V and three-phase service at 220 V delta or 415/240 V star, with commercial customers of 25 kVA and more on power service and large plants taking primary supply at 6.9, 12, 13.8 or 24 kV. JPS lists 415/220 V as its standard pad-mount transformer voltage, and 480 V service is absent from the tariff.

Asked is Jamaica 110 or 220 volt, the accurate answer is both, since the two exist on the same service, but the frequency drives the engineering. An induction motor on 50 Hz turns at five-sixths of its 60 Hz speed, so a centrifugal pump delivers about five-sixths of the flow and roughly 70 percent of the head it gave on 60 Hz, fans and compressors lose capacity in a similar way, and transformers and solenoids designed only for 60 Hz overheat. Paul selects motors rated for 50 Hz at the Jamaica 3 phase voltage the plant takes, resizes pumps and impellers to meet duty at 50 Hz speeds, and specifies drives, contactors and control transformers rated for 50 Hz service.

US 60 Hz practice set against Jamaican supply and rules
ItemTypical US designWhat a Jamaican plant needs
Frequency60 Hz50 Hz; motors, pumps, fans and compressors selected for 50 Hz speed
Three-phase voltage208 or 480 V415/240 V star or 220 V delta, confirmed at the plant transformer
Single-phase120 V110 V or 110/220 V
Electrical codeNFPA 70JS 316:2017 application document for NFPA 70; certificate of compliance before JPS connects
Boilers and receiversASME code, state inspectionFactories Act and Factories Regulations 1961, examination and test reports to the Ministry of Labour
Buildings and structuresIBC and ASCE 7Building Act 2018 and the National Building Code, based on the IBC

Jamaica voltage same as US? Converters, VFDs and 50 Hz motors

Jamaica voltage same as US practice holds only loosely for single-phase outlets, and three-phase power and frequency differ, so a US-built skid needs engineering rather than an adapter. A Jamaica voltage converter suits a laptop or a small appliance, while a process skid needs motors and drives rated for 50 Hz from the start. Variable frequency drives fed from 50 Hz power can run a motor at 60 Hz speed when the motor and load allow, and Paul uses that method selectively, for example to hold a pump curve, while sizing the drive input for the Jamaican supply.

The Jamaica electrical code and the certificate of compliance

The Jamaica electrical code is built on NFPA 70: the Bureau of Standards Jamaica publishes JS 316:2017 as the Jamaican application document for the National Electrical Code and its administrative provisions. Under the Electricity Act 2015 and the regulations of 2020, the Government Electrical Regulator oversees electrical work, and since November 2021 an electrical inspector chosen through the regulator’s portal issues the certificate of compliance that JPS requires before it connects an installation. Paul delivers single-line diagrams, panel schedules, test results and nameplate data that the inspector reviews.

Which Jamaican rules apply to boilers, buildings, standards and medicines?

Steam boilers, steam receivers and air receivers in Jamaican factories come under the Factories Act and the Factories Regulations of 1961, enforced by the Occupational Safety and Health Department of the Ministry of Labour and Social Security. The Department registers factories after an inspection, with a registration certificate valid for three years, and it issues report forms for the examination and testing of steam boilers and of steam and air receivers. A new occupational safety and health bill has been under review since 2017 and has yet to pass. Paul builds boilers and receivers to the ASME code and delivers the data reports, hydrostatic test records and nameplate data those reports draw on.

Boiler certificate renewal, Jamaica’s Factories Regulations and the plant file

Boiler certificate renewal under Jamaica’s Factories Regulations depends on a current examination and test report for each steam boiler and receiver, prepared on the Ministry’s forms. A plant that keeps the original design data, the hydrostatic test record and the repair history ready makes each renewal faster and clearer. Paul hands over that history in one binder with every boiler or receiver it supplies, and records later repairs and tests in the same format.

Buildings follow the Building Act 2018, in force since 15 January 2019, with the municipal corporation in each parish acting as the building authority. The Jamaica building code under that act is the International Building Code adopted with standards declared by the Bureau of Standards Jamaica. Hurricane and seismic loads shape outdoor equipment, so Paul designs tank anchorage, skid frames, pipe supports and cooling tower structures to the loads the owner’s engineer sets.

Standards and conformity sit with two bodies. The Bureau of Standards Jamaica writes national standards, and the National Compliance and Regulatory Authority, set up under an act passed in 2023, enforces compulsory standards on imports and goods in trade. Test reports from laboratories under the ILAC mutual recognition arrangement are accepted, which is how Paul’s material and instrument certificates are documented.

Pharmaceutical companies in Jamaica operate under the Food and Drugs Act of 1964 and the Food and Drugs Regulations of 1975, administered by the Standards and Regulation Division of the Ministry of Health and Wellness, which registers most drugs and health products before import or sale. Plants making medicines or nutraceuticals on the island need purified water, clean utilities and documented qualification, which Paul delivers under its validation and commissioning service.

Special economic zones in Jamaica and how equipment enters them

Special economic zones in Jamaica operate under the Special Economic Zones Act, in force since 1 August 2016, which replaced the earlier export free zones law and set corporate income tax for approved zone businesses at 12.5 percent. The Jamaica Special Economic Zone Authority, JSEZA, approves zones and the businesses in them, and the Port Authority of Jamaica is developing the Caymanas zone of about 700 acres in St Catherine. Equipment for an approved zone business enters under the zone’s customs treatment, so Paul matches invoices, packing lists and crate marks to the developer and occupant approvals the buyer holds.

Freight shipping to Jamaica from US East Coast ports

Freight shipping to Jamaica from US East Coast ports is a short ocean leg, with forwarders quoting about 4 to 7 days from Miami to Kingston port to port. Jamaica ports for process equipment are Kingston, where Kingston Freeport Terminal has been run by a CMA CGM-led concession since 2016 with 15.5 meters of draught, Montego Bay on the north coast, and Port Esquivel in St Catherine, which serves the alumina trade. For most plants, the Jamaica port Kingston terminal is the entry point, followed by a road haul to the parish.

Shipping to Jamaica from Florida, whether from Miami, Port Everglades or Jacksonville, runs on frequent Caribbean loops, while shipping to Jamaica from New York calls at other ports on the way and suits equipment built or bought in the Northeast. For shipping to Jamaica from US ports in general, Paul picks the port by sailing schedule and by the size of the heaviest module. Shipping to Jamaica from Miami offers frequent sailings for container cargo, which helps when a plant needs a module timed to a crop season or an outage.

Container shipping to Jamaica covers most skids and panels: a 40-foot high cube box offers roughly 12 meters of length, 2.35 meters of width and 2.69 meters of height inside, and Paul designs to that envelope where the process allows. Cargo shipping to Jamaica for wide tanks, heat exchanger shells and still sections uses flat racks or breakbulk. International shipping to Jamaica is quoted under Incoterms 2020, FCA at a US port or DAP at the plant, with ISPM 15 treated wood throughout. Air freight shipping to Jamaica through Kingston or Montego Bay suits urgent spare parts such as drive boards, seals and sensors, which Paul packs and lists separately.

Jamaica customs, import duty rates and GCT

Jamaica customs is run by the Jamaica Customs Agency through ASYCUDA World, and the United States has no free trade agreement with Jamaica, so US-built equipment pays the CARICOM Common External Tariff rate for its heading. Jamaica import duty rates therefore vary by tariff heading, and buyers asking how much is customs duty in Jamaica need the heading for each component. On the CIF value, importers also pay the General Consumption Tax at 15 percent, the Environmental Levy at 0.5 percent, the Standards Compliance Fee at 0.3 percent and stamp duty. Jamaica import requirements include the commercial invoice, packing list, bill of lading and any permits for regulated goods. Paul lists each item by heading so the customs agent the importer appoints files the entry cleanly.

How a Jamaican project with Paul Industries runs

Paul Industries runs a Jamaican project in nine stages, and the first two lock in the 50 Hz equipment selection, the plant voltage, the customs treatment and the documents the Factories Act and the electrical inspector need. Each stage and its output appear below.

Stages of a Jamaican process equipment project
StageActivityDeliverable to the plant
1. ScopeProcess duty, 50 Hz supply and voltage, zone status, wind and seismic loadsScope statement and governing codes
2. DesignFlow diagrams, equipment sizing at 50 Hz speeds, NFPA 70 panel designApproved drawings and data sheets
3. BuildWelding, fitting, wiring and instrument calibration in the United StatesMill certificates, weld maps, calibration sheets
4. Factory testHydrostatic, functional and control tests with 50 Hz test power where neededSigned test report and open items list
5. ExportPacking, sailing to Kingston or Montego Bay, customs entryInvoice, packing list, bill of lading, origin statement
6. Site workPaul places, connects and wires the equipment or supervises that workInstallation records and marked-up drawings
7. Start-upFlushing, boiler firing, refrigeration charge, loop tuningStart-up report and test data
8. AcceptancePerformance run, electrical inspection support documents, qualification where requiredAcceptance certificate and executed protocols
9. HandoverOperator training, spares, maintenance scheduleEnglish manuals and as-built package

After handover, Paul keeps the plant’s records and supports it with service visits, spare parts and repairs on the systems it supplied. Each turnover package lists recommended spares by part number with 50 Hz ratings marked, so a replacement motor or drive ordered later matches the Jamaican supply. Maintenance schedules follow the crop and production calendar the plant gives Paul, with boiler and receiver examinations placed ahead of the Ministry’s report dates.

Who builds process systems for plants in Jamaica?

Paul Industries builds process systems for plants in Jamaica: fermentation, steam and cooling systems for rum distilleries in St Elizabeth, Trelawny and St Catherine, chillers, CIP and tanks for breweries and food plants in Kingston and Clarendon, refrigeration for poultry processing, and vessels, heat exchangers and pump skids for alumina and refining service. Paul engineers every system for 50 Hz and JPS voltages, builds to ASME and NFPA 70, documents boilers and receivers for the Factories Regulations, and installs and commissions the work, or supervises its installation, with a single contract and a single file.

What sets the cost of a 50 Hz system shipped to a Jamaican plant?

The cost of a 50 Hz process system shipped to a Jamaican plant depends on five items beyond the equipment price: 50 Hz engineering, freight and handling, import charges, documentation, and the installation route. Paul prices each as a separate line in US dollars.

  • 50 Hz engineering. Motors, pumps, compressors and drives selected for 50 Hz and 415 V add engineering and sometimes larger frames.
  • Freight. The sailing from Florida is short; flat racks, port cranes and the road haul to St Elizabeth or Clarendon add more.
  • Import charges. CET duty by heading, GCT at 15 percent and the smaller levies apply unless a zone or waiver changes them.
  • Documentation. Boiler data reports, electrical inspection packages and qualification protocols are priced as defined deliverables.
  • Site work. Work during a distillery crop season or a refinery outage sets the installation figure; supervision lowers it.

Paul Industries for Jamaican distilleries, food plants and refineries

Paul Industries designs, fabricates and tests 50 Hz process, steam, cooling and water systems for plants across Jamaica, ships them to Kingston or Montego Bay, and installs and commissions them or supervises installation, with electrical, boiler and acceptance records in one English turnover package. The Dominican Republic page covers the neighboring Caribbean market to the east. Send the process duty, the parish, the transformer voltage and the target start-up, and Paul answers with a route, a schedule and a price in US dollars. Request a quote to begin a Jamaican project.

Standards referenced: Electricity Act 2015 and the Electricity (Electrical Work, Registration and Licensing) Regulations 2020 · JS 316:2017, Jamaica Application Document for NFPA 70 · Factories Act and Factories Regulations 1961 · Building Act 2018 and the National Building Code of Jamaica · Food and Drugs Act 1964 and Food and Drugs Regulations 1975 · Special Economic Zones Act 2016 · NCRA Act 2023 · ASME Boiler and Pressure Vessel Code Sections I and VIII · ASME B31.1 and B31.3 · IEC 60034 motor ratings for 50 Hz · Incoterms 2020 · ISPM 15

Frequently asked questions

What is the Jamaica voltage at an industrial plant's switchboard?

Jamaican plants take three-phase power from JPS at 415/240 V star or 220 V delta, at 50 Hz, and big sites take primary supply at 6.9, 12, 13.8 or 24 kV and transform it on site. Paul Industries reads the plant transformer data during design and selects every motor, heater and control transformer for that supply.

Does a Jamaica voltage converter make a 60 Hz skid usable on JPS power?

A plug-in converter changes voltage for small appliances, while a process skid also needs equipment rated for 50 Hz, because a 60 Hz motor on 50 Hz power runs slower and its pumps and fans lose flow and head. Paul Industries builds skids for Jamaica with 50 Hz motors, resized pumps and drives rated for the JPS supply.

How does 50 Hz change a centrifugal pump bought for a Kingston plant?

On 50 Hz a pump turns at five-sixths of its 60 Hz speed, so flow falls to about five-sixths and head to roughly 70 percent. Paul Industries selects the pump and impeller for the duty point at 50 Hz speed, or uses a drive sized for the Jamaican supply, so the Kingston plant gets the flow and pressure it specified.

Who builds steam and fermentation systems for rum distilleries in St Elizabeth?

Paul Industries designs, fabricates and installs fermentation and spirit tanks, steam boilers and distribution, heat exchangers, cooling water and effluent systems for rum distilleries in St Elizabeth, Trelawny and St Catherine. Each system is built for 50 Hz and JPS voltages, documented for the Factories Regulations, and started up by Paul or under its supervision.

Does Paul Industries supply chillers and CIP to breweries and food plants in Kingston?

Paul Industries supplies glycol chillers, CIP skids, bright and storage tanks, retort and blanching steam, and refrigeration to breweries, beverage plants and food canners in Kingston and St Andrew. Equipment arrives factory tested with English manuals, wired to NFPA 70 for the certificate of compliance, and Paul installs it or supervises the installation.

Who fabricates heat exchangers and vessels for alumina refineries in Clarendon and St Catherine?

Paul Industries fabricates heat exchanger bundles and shells, pressure vessels, flash tanks, pipe spools and pump skids for alumina refining service in Clarendon and at Ewarton in St Catherine. Materials and wall thickness are chosen for hot caustic slurry, and every item ships with ASME data reports, test records and dimensional drawings.

Which equipment do poultry plants in St Catherine order from US builders?

Poultry plants in St Catherine order ammonia refrigeration and blast freezing, chilled water for carcass chillers, scalding water and steam, wash water treatment and wastewater systems. Paul Industries builds that equipment for 50 Hz service and the plant voltage, and documents boilers and receivers for the Factories Regulations.

How does boiler registration work at a Jamaican factory?

Jamaican factories register with the Occupational Safety and Health Department of the Ministry of Labour and Social Security, which inspects them under the Factories Act and Factories Regulations 1961 and keeps report forms for the examination and testing of steam boilers and receivers. Paul Industries supplies the design data, hydrostatic test records and nameplate details those reports need.

What does the electrical inspector check before JPS connects a new skid?

Since November 2021, an electrical inspector chosen through the Government Electrical Regulator’s portal reviews the installation and issues the certificate of compliance JPS requires. The Jamaican application document JS 316:2017 builds on NFPA 70. Paul Industries supplies single-line diagrams, panel schedules and test results for that review.

Which rules apply to a purified water system at a Jamaican pharmaceutical plant?

Drug and health products in Jamaica fall under the Food and Drugs Act 1964 and Regulations 1975, administered by the Standards and Regulation Division of the Ministry of Health and Wellness. A purified water system for a plant making medicines needs documented design, traceable materials and qualification records, which Paul Industries delivers with each system.

What transit time should a Kingston plant plan for on container shipping to Jamaica?

Forwarders quote about 4 to 7 days port to port from Miami to Kingston, with customs entry and the road haul to the plant added after arrival. Paul Industries books the sailing, designs skids to fit high cube containers where possible, and sends wide tanks and shells on flat racks.

Should equipment for a north coast plant land at Montego Bay or Kingston?

Kingston Freeport Terminal, with 15.5 meters of draught, serves the south coast and the industrial parishes around the capital, while Montego Bay serves the north coast and western parishes. Paul Industries chooses the port by sailing, crane capacity and the road route to the plant in Trelawny, St James or Westmoreland, which sets the height and weight limits for each module.

How much is customs duty in Jamaica on a US-built heat exchanger?

Jamaica applies the CARICOM Common External Tariff, so the duty on a heat exchanger depends on its tariff heading, and there is no US free trade agreement to remove it. GCT at 15 percent, the 0.5 percent Environmental Levy and the 0.3 percent Standards Compliance Fee are charged on the CIF value. Paul Industries classifies each item for the customs agent.

What benefits do special economic zones give a Jamaican manufacturer buying equipment?

The Special Economic Zones Act of 2016 sets corporate income tax for approved zone businesses at 12.5 percent and provides customs treatment for goods entering the zone, approved by the Jamaica Special Economic Zone Authority. Paul Industries matches invoices and crate marks to the zone approvals the buyer holds.

How do hurricane loads shape cooling towers and tanks for Jamaican plants?

Outdoor equipment in Jamaica faces hurricane winds, as Hurricane Melissa showed in October 2025, and the National Building Code under the Building Act 2018 sets the design basis. Paul Industries designs tank anchorage, cooling tower structures, skid frames and pipe supports to the wind and seismic loads the owner’s engineer specifies.

Are drawings for Jamaican plants delivered in metric or imperial units?

Jamaica is officially metric, yet many plants still work in pounds, gallons and inches. Paul Industries draws in the units the owner’s engineering standard sets and adds dual dimensions where the plant mixes both, with English manuals, alarm texts and nameplates throughout.

Can a Jamaican plant witness the factory test of its equipment?

Engineers from Jamaican plants are welcome at Paul Industries factory tests in person or by video, including runs on 50 Hz test power where the equipment needs it. The signed test report and open items list form part of the turnover package, so the plant starts site acceptance with proof of factory performance.

Which project details produce a fixed price for a Jamaican plant?

A fixed price for a Jamaican project comes from the process duty, the parish and site, the transformer voltage at 50 Hz, any zone approval, the boiler and receiver scope, and the target start-up. The proposal gives the route, the schedule and a US dollar price, with freight, import charges and installation as separate lines.

Planning 50 Hz process equipment for a plant in Jamaica?

Tell Paul Industries the process duty, the parish and the transformer voltage, and the reply will set out the sailing, the build schedule and a working budget for the plant. Call 201-450-8280 or request a quote.