Paul Industries is a process equipment contractor in Puerto Rico for pharmaceutical, biotech and medical device plants, designing and fabricating WFI and purified water systems, clean steam generators, CIP and SIP skids, process tanks and sanitary piping on the mainland and installing, starting up and validating them at island plants. Headquartered at 256 Shore Drive, Kilmarnock, Virginia, Paul Industries ships the equipment on Jones Act vessels to San Juan, then installs and commissions it on site or supervises the plant’s own installation. Puerto Rico is a US territory, so the work follows the same FDA rules, ASME codes and US dollar contracts as a plant in New Jersey, with hurricane anchorage and grid resilience added.
Request a quote or call 201-450-8280
What does a process equipment contractor in Puerto Rico build?
A process equipment contractor in Puerto Rico builds for one of the densest concentrations of FDA-regulated manufacturing in the United States, so most of the work is high-purity water, clean utilities and product-contact equipment that has to pass a cGMP inspection on its first day of use. Paul Industries designs and fabricates high-purity water systems from pretreatment through WFI distribution, clean steam systems, CIP and SIP skids, bioreactor and buffer vessels, sanitary piping and complete process modules for island plants.
The same shop builds for the utility side of those sites: boiler feed and cooling water treatment, chilled water and glycol loops, compressed air, and process wastewater systems. Cleanroom suites and their air and water utilities are delivered through Paul’s cleanroom work, built to withstand the humidity of a Caribbean climate.
Plants in Puerto Rico choose among three delivery routes. Supply-only covers design, fabrication, the factory acceptance test and delivery to the plant, with Paul supervising setting and tie-ins. Design-build adds process engineering and utility design for the area the equipment serves. Complete installation brings Paul to the plant for rigging, welding, wiring, start-up, commissioning and qualification, so the quality unit signs off a running system.
Puerto Rico pharmaceutical industry: where the plants are
The Puerto Rico pharmaceutical industry is the island’s largest export business, and the government’s 2025 industry profile puts fiscal year 2024 pharmaceutical exports at $48.3 billion, about 74% of the island’s $65.4 billion in total exports. Federal trade data rank Puerto Rico second among US jurisdictions for pharmaceutical export value in 2024, at 17.6% of the national total, behind Indiana. Puerto Rico pharmaceutical manufacturing sits mostly along the north coast west of San Juan and in the eastern and central valleys.
| Area | Plants and investment | Typical equipment scope |
|---|---|---|
| Barceloneta and Manati (north coast) | AbbVie and Viatris sites in Barceloneta; a Bristol Myers Squibb biomanufacturing site in Manati | WFI and purified water, clean steam, buffer and media prep, CIP |
| Juncos (east central) | Amgen’s biologics plant, with $650 million committed in September 2025 and $300 million more in May 2026; a BD device plant | Bioprocess vessels, clean utilities, sanitary piping, cleanroom utilities |
| Carolina (metro San Juan) | Lilly del Caribe, where Lilly announced more than $1.2 billion in October 2025 to expand and modernize the site | Process water, API process piping, solvent and utility systems |
| Humacao (east coast) | Bristol Myers Squibb manufacturing and medical device operations including Medtronic | Purified water, compressed gases, process cooling |
| Island-wide device sector | About 70 medical device manufacturing sites and 46 biopharma plants were counted in 2020 | Purified water, cleanroom utilities, passivated piping, process chillers |
Puerto Rico pharmaceutical companies range from global brand makers to contract manufacturers and API producers, and the equipment each one buys follows the same pattern Paul builds for pharmaceutical and biotech plants on the mainland. Medical device manufacturing in Puerto Rico adds purified water for cleaning and rinsing, passivated stainless piping and controlled environments, described on the medical device page. Puerto Rico manufacturing beyond life sciences, including food, beverage and electronics, uses the utility side of the same scope.
Why are so many pharmaceutical companies in Puerto Rico?
Why are so many pharmaceutical companies in Puerto Rico is a question with a tax answer and an operating answer. The tax answer is history: federal incentives drew drug makers to the island for decades, and pharmaceutical employment peaked in 2004, the year before the end of a ten-year phaseout of those incentives. Puerto Rico manufacturing tax incentives under the island’s own law continue to play a part in site decisions.
The operating answer explains why the plants stayed. Puerto Rico is a US territory, so drugs made there ship to the mainland without customs duties and under the same FDA approvals as a plant in Indiana or North Carolina. The island has a workforce with generations of cGMP experience, a dense base of engineering and validation talent, and plant infrastructure already built for sterile and biologic products. The Amgen and Lilly commitments of 2025 and 2026 show manufacturers reinvesting in that base, and each expansion brings new water systems, clean utilities and process equipment that has to be built, shipped and qualified.
FDA jurisdiction and Puerto Rico pharmaceutical regulations
Puerto Rico pharmaceutical regulations are federal regulations: the Federal Food, Drug, and Cosmetic Act applies on the island exactly as it does on the mainland, and FDA investigators from the San Juan District Office inspect drug and device plants against 21 CFR Parts 210 and 211 and the device quality system rule. A water system qualified in Puerto Rico is held to the same USP monographs, the same data integrity expectations and the same Form 483 standard as one in New Jersey.
That shared rulebook is an advantage when equipment comes from a mainland shop. Paul writes user requirement specifications against USP Purified Water and Water for Injection, builds and passivates the system to ASME BPE, and runs the factory test, the on-site acceptance test and the installation and operational qualification under its validation and commissioning scope, with the PQ data set ready for the plant’s quality unit. Where an island plant already carries an FDA observation on its water system, Paul’s FDA 483 water system remediation work redesigns and requalifies the loop. Plants that also ship to Europe follow the Ph. Eur. route described on the Ireland page, and Paul documents systems to both monographs when a site serves both markets.
Puerto Rico building code, hurricane wind and equipment anchorage
The Puerto Rico building code in force since Hurricane Maria raised the design wind loads for buildings and the equipment fixed to them, and that change reaches every outdoor tank, cooling tower, skid shelter and pipe rack a process project installs. Maria made landfall near Yabucoa at about 6:15 in the morning on September 20, 2017, as a strong Category 4 hurricane with 155 mile per hour sustained winds, and federal assessments afterward found that the prior code’s 145 mile per hour design wind, drawn from ASCE 7-05, fell short.
The 2018 Puerto Rico Building Code is based on the 2018 International Building Code with island amendments and takes its design wind speed maps from ASCE 7-16. It also includes 316 wind microzone maps, a set for each municipality, because the island’s mountains speed up the wind well beyond what the general ASCE topographic factors predict. For process equipment, that means anchor bolts, base plates and supports designed for the microzone at the plant, wind-rated enclosures for outdoor skids, and tie-downs for tanks and vessels. Paul designs anchorage and supports for the site’s mapped wind speed and documents the calculations with the turnover package.
Pressure equipment on the island also falls under the boiler and pressure vessel regulation of PR OSHA, part of the Puerto Rico Department of Labor and Human Resources. Its Reglamento 17, the Reglamento para Calderas y Recipientes a Presion, references ASME and ANSI codes, so boilers, Puerto Rico’s steam generators and unfired vessels are built to ASME construction and documented for the plant’s inspection records. Paul builds vessels, clean steam generators and boiler feed systems to ASME and delivers the data reports and test records the regulation asks for.
Power supply on the island: LUMA, Genera PR and resilient design
Power in Puerto Rico follows US practice at 60 Hz, with the familiar 120/208 V and 277/480 V systems, so motors, drives and panels built to the National Electrical Code for a mainland plant carry over unchanged. Grid reliability is the difference. LUMA Energy has operated the transmission and distribution system since June 1, 2021, and Genera PR has operated the legacy generating plants since July 1, 2023, while the public power authority keeps ownership of the assets.
Island-wide outages remain part of the operating picture. A failure on New Year’s Eve 2024 left the island dark for about two days, and on April 16, 2025, every one of LUMA’s roughly 1.4 million customers lost power when the generating plants tripped offline. Many large pharmaceutical sites run on-site generation for that reason, and process equipment for those sites is designed to ride through a transfer and recover cleanly.
Paul designs island equipment with that in mind: control panels and PLCs on uninterruptible power so batch records and alarms survive a transfer, restart sequences that bring a WFI loop back to temperature and flow in a defined order, sanitization routines triggered automatically after an excursion, and motor starting loads sized for the plant’s generators. Paul’s plant utilities work covers the generators’ cooling water, fuel oil and steam interfaces when the scope includes them.
Shipping to Puerto Rico from the US: Jones Act freight and paperwork
Shipping to Puerto Rico from the US mainland, which buyers also search as shipping to Puerto Rico from US ports, moves almost entirely by sea, and because the island is a US port, the Jones Act decides which vessels may carry the cargo. Ocean freight shipping to Puerto Rico runs mostly from Jacksonville, and published schedules show three to four days from Jacksonville to San Juan, with some vessels making the run in under three.
What is the Jones Act, Puerto Rico’s shipping rule?
The Jones Act, Section 27 of the Merchant Marine Act of 1920, requires cargo moving between US ports to sail on vessels that are US-built, US-owned and US-crewed. For the Jones Act, Puerto Rico counts as a US point, so a skid shipped from a mainland port to San Juan goes on a qualified Jones Act vessel, in a container, on a flat rack or as roll-on, roll-off or breakbulk cargo. Jones Act Puerto Rico shipping is scheduled and frequent, with multiple sailings each week from Jacksonville, which lets Paul book the voyage close to the FAT date.
Is shipping to Puerto Rico international?
Is shipping to Puerto Rico international is a common question, and the answer has two halves. For customs, Puerto Rico shipments are domestic: there is no customs entry and no import duty. For export statistics, the Foreign Trade Regulations still require Electronic Export Information for shipments from the United States to Puerto Rico, although advance filing is waived on this lane and proof of filing is given to the carrier before departure. The commercial invoice for shipping to Puerto Rico supports both the EEI filing and the island’s tax declarations.
| Requirement | What it covers | How Paul handles it |
|---|---|---|
| Jones Act carriage | Cargo between US ports on US-built, US-owned, US-crewed vessels | Booking on a qualified carrier, usually from Jacksonville |
| Electronic Export Information | Required for US to Puerto Rico shipments under the Foreign Trade Regulations; advance filing waived on this lane | EEI filed and proof given to the carrier before the vessel sails |
| Excise declaration (arbitrios) | Goods brought onto the island are declared to Hacienda through SURI with the commercial invoice and bill of lading | Invoice and bill of lading data prepared for the importer’s declaration |
| Sales and use tax (IVU) | 11.5% in total (10.5% state, 1% municipal); manufacturing plants with an exemption certificate are exempt on machinery and equipment used in manufacturing | Equipment descriptions written so the plant’s exemption certificate applies cleanly |
| Crating and preservation | Sea transit in heat and humidity | Dried and capped lines, desiccant, vapor barrier, marked lift points |
Shipping heavy items to Puerto Rico, such as columns, large vessels or prefabricated utility modules, works best on flat racks or roll-on, roll-off service, and the shipping envelope is fixed at design so the module leaves the shop in a shape the carrier accepts. Paul plans the truck leg from the shop to Jacksonville, the vessel booking, and the delivery from the San Juan terminal to the plant as one schedule. Inside the United States, coverage for mainland plants is described on the service area page, and projects outside the country on the international page.
Heat, humidity and salt air: designing equipment for island plants
Equipment for island plants is designed for heat, high humidity and, at the coastal sites from Barceloneta to Carolina, salt-laden air, which together attack carbon steel, insulation and electrical enclosures faster than on most mainland sites. A skid that sits indoors in a cleanroom sees none of it; a cooling water skid, a tank farm or a pipe rack outside the building sees all of it every day of the year.
Paul specifies materials and finishes for the exposure at each location. Outdoor supports and frames are galvanized or coated with systems rated for marine atmospheres, stainless fasteners replace plated ones, and insulated lines get sealed metal jacketing so rain and condensation stay out of the insulation, where corrosion under insulation begins. Electrical enclosures outdoors are rated for washdown and corrosive environments, with breathers and heaters where condensation forms inside a cabinet overnight. Inside the plant, the same humidity drives condensation on chilled water and glycol lines, so vapor barriers and insulation thickness are calculated for the island’s dew points rather than copied from a mainland drawing.
Chilled water and process cooling carry a heavier year-round load than on the mainland, because the climate never offers a cold season that lets chillers rest. Paul sizes chillers, cooling towers and heat exchangers for that duty and builds redundancy into the loops that serve cleanrooms and WFI condensers, so a single failed unit does not stop production. The same thinking applies to spares: the turnover package lists the parts worth keeping on the shelf at the plant, given the sailing time from the mainland, so a failed seal or sensor is replaced from stock instead of waiting for the next vessel.
Scheduling around the Atlantic hurricane season is part of the plan as well. Paul sets FAT dates, vessel bookings and installation windows so that heavy lifts, open roof penetrations and outdoor tie-ins are completed outside the peak storm months where the project calendar allows, and equipment staged at the plant is secured to the same wind design as the finished installation.
How a Puerto Rico project runs with Paul Industries
A Puerto Rico project with Paul Industries runs in nine stages, built around the FDA validation lifecycle and the sailing schedule, and the table lists what the plant receives at each one.
| Stage | What happens | What the plant receives |
|---|---|---|
| 1. Requirements and site review | User requirements, USP basis, wind microzone, power and generator interfaces, Reglamento 17 records | URS, code and design basis |
| 2. Design | P&IDs, vessel and piping calculations, anchorage design, restart and alarm logic | Drawings, data sheets, functional specification |
| 3. Mainland fabrication | Orbital welding, assembly, passivation, wiring and instrumentation | Weld logs, borescope records, material and finish certificates |
| 4. Factory acceptance test | Pressure, function, sequence and alarm tests, witnessed in person or by video | Signed FAT protocol |
| 5. Crating and Jones Act shipment | Preservation, crating, EEI, vessel booking, delivery from the San Juan terminal | Commercial invoice, packing list, bill of lading |
| 6. Installation or supervision | Paul sets, anchors, ties in and wires the equipment, or directs the plant’s team through the same steps | Installation and tie-in records |
| 7. Start-up | Flushing, passivation of field welds, sanitization, first run | Start-up report, setpoint list |
| 8. Commissioning and qualification | Site acceptance test, IQ and OQ, PQ support sampling | Executed protocols, deviation reports |
| 9. Handover and service | Training in English or Spanish, turnover package, service visits | As-builts, manuals, spare parts list |
What drives the cost of a project in Puerto Rico?
The delivered cost of a project in Puerto Rico depends on five items besides the equipment, and Paul quotes each as a separate line so the plant’s engineering and purchasing teams see the full picture.
- Cost of shipping to Puerto Rico. Container moves are economical; flat racks, roll-on, roll-off and breakbulk modules cost more, and the truck leg to the port adds to the total.
- Wind and anchorage design. Outdoor equipment in a high wind microzone needs heavier supports and anchors.
- Resilience features. UPS-backed controls, restart logic and generator interfaces add design and programming time.
- Validation scope. A full IQ and OQ with PQ support for a WFI system costs more than commissioning a utility skid.
- Installation route. Directing the plant’s own installers needs less Paul field time than a complete installation, while a complete installation leaves start-up responsibility with the firm that built the system.
Paul’s first number is a budget figure drawn from similar island projects; the firm price follows when the drawings, validation scope and sailing are settled.
Who builds process systems for plants in Puerto Rico?
Paul Industries builds process systems for plants in Puerto Rico, from single CIP or dosing skids to complete WFI generation and distribution systems, clean steam, process vessels and sanitary piping, and carries them through the FAT, the Jones Act voyage, installation and qualification at the plant. For Puerto Rico manufacturing companies that buy from the mainland, the value is one contract covering design, fabrication, shipping, field work and validation, with one firm accountable for the result. That matters most at the handover, when the quality unit reviews the executed protocols: the engineers who wrote the functional specification, ran the factory test and started the system at the plant are the same people answering the deviation reports, so questions close in a single review cycle. Paul then returns for scheduled service, sanitization support and requalification after changes, working from the drawings and test records it already holds.
Paul Industries for plants in Puerto Rico
Paul Industries, headquartered at 256 Shore Drive, Kilmarnock, Virginia, engineers and builds process systems for pharmaceutical, biotech, medical device and industrial plants across Puerto Rico, from Barceloneta and Manati to Juncos, Carolina and Humacao. Paul fabricates the equipment on the mainland, tests it, ships it on Jones Act vessels and installs, starts up and commissions it at the plant or supervises the installation, with validation protocols, weld records and as-builts handed over with the system. Send your scope and site to request a quote.
Standards referenced: 21 CFR Parts 210 and 211 (cGMP for finished pharmaceuticals) · 21 CFR Part 820 (medical device quality system) · USP Purified Water and Water for Injection monographs · ASME Boiler and Pressure Vessel Code Section VIII · ASME BPE · ASME B31.3 Process Piping · PR OSHA Reglamento 17, Reglamento para Calderas y Recipientes a Presion · 2018 Puerto Rico Building Code · ASCE 7-16 Minimum Design Loads · NFPA 70 (National Electrical Code) · Merchant Marine Act of 1920, Section 27 (Jones Act) · Foreign Trade Regulations, 15 CFR Part 30
Frequently asked questions
Which contractor designs and qualifies WFI loops for north coast plants in Barceloneta and Manati?
Paul Industries builds WFI generation, storage and distribution systems for pharmaceutical and biologics plants along the north coast, including Barceloneta and Manati. Each system is designed to the USP Water for Injection monograph and ASME BPE, tested in Paul’s mainland shop, shipped on a Jones Act vessel to San Juan, and installed, commissioned and qualified at the plant with IQ and OQ protocols the quality unit approves.
Does FDA jurisdiction in Puerto Rico differ from the mainland?
FDA jurisdiction in Puerto Rico is the same as on the mainland, because the island is a US territory. Drug and device plants are inspected against the same parts of 21 CFR, water systems are held to the same USP monographs, and Form 483 observations carry the same weight. Paul Industries documents island equipment exactly as it would for a plant in New Jersey or North Carolina.
Is shipping to Puerto Rico considered international for export paperwork?
Puerto Rico is domestic for customs, so there is no customs entry or import duty. The Foreign Trade Regulations still require Electronic Export Information for shipments from the mainland to Puerto Rico, with advance filing waived and proof of filing given to the carrier before departure. Paul Industries files the EEI and supplies the commercial invoice the plant uses for its Hacienda declarations.
How long does ocean freight take from Jacksonville to San Juan?
Published schedules show about three to four days from Jacksonville to San Juan on Jones Act vessels, with some ships making the run in under three, and sailings leave more than once a week. Paul Industries adds the truck leg to the port and the delivery from the San Juan terminal to the plant, and books the voyage to match the FAT and installation dates.
How does the Jones Act affect the cost of shipping equipment to Puerto Rico?
The Jones Act limits carriage between US ports to US-built, US-owned and US-crewed vessels, so equipment from the mainland sails with a qualified carrier at that lane’s rates. Crate size matters more than distance: container moves cost less than flat racks or roll-on, roll-off service. Paul Industries fixes the shipping envelope during design so skids fit the most economical option.
What wind speed do skids and tanks in Puerto Rico have to be anchored for?
Equipment anchorage follows the 2018 Puerto Rico Building Code, which uses ASCE 7-16 wind maps and 316 microzone maps that capture how the island’s terrain speeds up the wind at each municipality. A tank on a hilltop in Juncos sees different loads from one on the coast in Carolina. Paul Industries designs supports and anchors for the plant’s mapped wind speed and documents the calculations.
How do island power outages affect a WFI or clean steam system?
An outage stops circulation and heating, so a WFI loop or clean steam generator has to restart in a defined order and prove its temperature and quality before use. After the island-wide blackouts of December 2024 and April 2025, plants weigh this heavily. Paul Industries builds UPS-backed controls, generator-ready motor starting and automatic restart and sanitization sequences into island systems.
Which rules apply to boilers and pressure vessels in Puerto Rico?
Boilers and pressure vessels in Puerto Rico fall under PR OSHA’s Reglamento 17, the boiler and pressure vessel regulation of the Department of Labor and Human Resources, which references ASME and ANSI codes. Paul Industries builds vessels, clean steam generators and boiler feed equipment to ASME construction and supplies the data reports, test records and drawings the plant keeps for inspection.
Does a manufacturing plant in Puerto Rico pay sales tax on new process equipment?
Puerto Rico’s sales and use tax totals 11.5%, but manufacturing plants holding an exemption certificate from Hacienda are exempt on machinery and equipment used in the manufacturing process. The plant presents its certificate for the purchase. Paul Industries writes invoice descriptions that tie each item to its manufacturing use so the exemption applies without questions.
Who installs process equipment for biotech plants in Juncos?
Paul Industries installs and commissions bioprocess vessels, clean utilities, sanitary piping and water systems for biotech plants in Juncos and the surrounding eastern valleys. Paul sets, anchors and ties in the equipment it fabricated, or supervises the plant’s installation team, then runs the site acceptance test and qualification so the plant receives a validated system.
Does Paul Industries build for medical device manufacturers in Puerto Rico?
Paul Industries builds purified water systems, passivated stainless piping, process chillers and cleanroom utilities for medical device manufacturers in Puerto Rico, a sector of about 70 device sites in 2020. Systems are documented for the FDA device quality system rule and qualified at the plant, with operator training in English or Spanish.
What drives the cost of a validated water system for a plant in Carolina?
The cost of a validated water system in Carolina or elsewhere on the island depends on the generation technology and capacity, loop length and number of points of use, the validation scope, wind anchorage for outdoor components, resilience features for power interruptions, freight, and the choice between a Paul Industries installation and Paul supervision of plant installers. Each appears as a separate line in Paul’s quote.
Can Paul Industries remediate a water system cited on a Form 483 in Puerto Rico?
Paul Industries remediates water systems cited on FDA Form 483 at plants in Puerto Rico, from dead leg removal and rouge treatment to loop redesign and full requalification. Paul reviews the observation, the system drawings and the trending data, proposes the corrective work, builds replacement sections on the mainland and executes the requalification protocols at the plant.
Do Puerto Rico plants need documents in Spanish?
Puerto Rico has two official languages, Spanish and English, and FDA-regulated plants on the island keep their quality records to federal requirements, often in English, while many operators train and work in Spanish. Paul Industries supplies the validation and turnover documents in the language the plant’s quality system uses and delivers operator training in English or Spanish.
How does a factory acceptance test work for a skid bound for Humacao?
The factory acceptance test runs in Paul Industries’ mainland shop before crating, against a protocol the plant approves, with the plant’s engineers attending in person or by live video. It covers pressure tests, surface finish and drainability checks, panel energization, loop checks, sequences and alarms. The signed protocol ships with the skid to Humacao and becomes the baseline for the site acceptance test.
Which Puerto Rico building code requirements apply to an outdoor tank farm in Barceloneta?
An outdoor tank farm in Barceloneta is designed to the 2018 Puerto Rico Building Code, using the ASCE 7-16 wind maps and the municipality’s microzone map for wind loads on each tank, plus seismic loads, anchorage and the containment rules for the stored liquid. Paul Industries calculates anchorage and supports for the site, specifies coatings for the coastal air and delivers the calculations with the turnover package.
Does Paul Industries take utility and industrial projects in Puerto Rico outside pharma?
Paul Industries takes utility and industrial projects across Puerto Rico, including boiler feed and cooling water treatment, chilled water and glycol systems, compressed air, process wastewater and steam piping, for pharmaceutical, food and beverage, electronics and power plants. The same mainland fabrication, Jones Act shipping and on-site installation route applies to each.
Planning process equipment for a plant in Puerto Rico?
Send the plant location, the scope or P&IDs, the validation requirements and the target start-up date, and Paul Industries will return a design basis, a shipping plan and a budget estimate. Call 201-450-8280 or request a quote.
