Paul Industries provides tank fabrication in Maryland for terminals, plants, hospitals, campuses and data centers, building shop-fabricated and field-erected tanks in carbon steel and stainless steel, setting them on engineered foundations and testing them for service under the state’s 2022 storage tank rules. Maryland rewrote its oil storage regulations in COMAR 26.10 in June 2022, adding separate chapters for shop-built and field-erected aboveground tanks, so a new oil tank is now designed around state construction, containment and inspection requirements from the first drawing. Paul Industries is an East Coast contractor headquartered in Kilmarnock, Virginia, and builds tanks for owners across Maryland.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Current rules COMAR 26.10, effective June 13, 2022
AST registration Facilities with more than 2,500 gallons of oil in ASTs
Oil Operations Permit 10,000 gallons or more of aboveground oil storage
Dike sizing 110% of the largest tank where open to rain (26.10.17.07)
Inspections At least monthly visual checks on every regulated AST
Reviewed November 2026

Tank fabrication in Maryland: steel, stainless and the rules that follow the contents

Tank fabrication in Maryland covers the design, material supply, welding, testing, delivery or field erection, setting and piping of storage and process tanks, and the rules that apply depend first on what the tank will hold. Oil tanks above 250 gallons fall under the MDE Oil Control Program and COMAR 26.10; tanks for water, food products, pharmaceuticals and many chemicals are governed by the plant’s process standards, the fire code and, for pressurized vessels, the state boiler and pressure vessel law. A single plant often has all three kinds.

The national picture of tank types, standards and fabrication methods is on the tank fabrication page. This page goes into what Maryland adds: the 2022 aboveground tank chapters, registration and permit thresholds, dike and foundation rules, and the industries across the state that buy tanks.

Maryland above ground storage tank regulations after the 2022 rewrite

Maryland above ground storage tank regulations were modernized when the Secretary of the Environment adopted a comprehensive revision of COMAR 26.10 on May 24, 2022, effective June 13, 2022, which created COMAR 26.10.17 for shop-fabricated aboveground storage tanks and COMAR 26.10.18 for field-erected ones. The revision defines an aboveground storage tank (AST) as one with a capacity greater than 250 gallons, and it separates new systems, whose installation or dike was completed on or after June 13, 2022, from existing ones built before that date.

New and relocated AST systems must meet the chapters when installed. Existing systems were given two years from June 13, 2022 to comply, unless MDE approved another period. Before a new or replacement AST system or dike is installed, any wetland or waterway authorization required under COMAR 26.10.01.04E is obtained, and tanks in flood-prone locations are anchored against flotation in line with NFPA 30A. The Maryland aboveground storage tank regulations therefore reach well beyond the tank shell, into the site, the foundation and the containment around it.

The MDE Oil Control Program: registration and the oil operations permit

The MDE Oil Control Program regulates oil storage through two thresholds: a facility with more than 2,500 gallons of aggregate oil storage capacity in ASTs registers every AST system with the program under COMAR 26.10.01.10, and a facility with 10,000 gallons or more of aboveground oil storage needs an Individual Oil Operations Permit under COMAR 26.10.01.09, which takes the place of registration. Other activities trigger the permit regardless of tank volume.

When a Maryland oil facility registers its tanks or needs an MDE oil operations permit
SituationRequirementEffect on a new tank project
Aggregate AST oil storage above 2,500 gallonsRegister all AST systems with the Oil Control Program (COMAR 26.10.01.10)New tank added to the registration and kept current
Aggregate AST oil storage of 10,000 gallons or moreIndividual Oil Operations Permit (COMAR 26.10.01.09)Permit amended when regulated storage changes
Used oil in ASTs of 1,000 gallons or moreOil Operations PermitMaintenance shops and fleet garages often cross this line
Marina AST system serving motor fuel dispensingOil Operations PermitAny size of marina fuel tank system
Loading rack or transfer area for trucks or rail carsOil Operations PermitTerminal and bulk plant work includes the rack
Tank of 250 gallons or lessOutside the AST definitionSmall day tanks sit below the threshold

Searches for an above ground storage tank permit in Maryland usually mean this oil operations permit; air permits and building permits can also apply, depending on the product and the county. Paul Industries reviews the facility’s registration or permit before design so the new tank, its piping and its containment are described correctly in the amendment.

Shop-built tanks under COMAR 26.10.17

Shop-built tanks under COMAR 26.10.17 must suit the oil they store and be built to an industry standard such as UL, STI or API, sit on a foundation that supports the full tank without movement or uneven settling and drains water away from the base, and be elevated off the ground unless MDE approves an alternative in writing that includes cathodic protection. Sites subject to flooding need a foundation designed by a professional engineer from field and laboratory testing.

Every new, repaired or relocated system passes a tightness test under NFPA 30 after installation or repair and before it goes into service. Vaulted tanks carry their own rules: a UL-listed vault and a tank listed for aboveground use, normal vents ending at least 12 feet above grade and 5 feet from building openings, and vapor detectors within 12 inches of the vault floor that alarm at 25 percent of the lower flammable limit. Paul Industries builds and sets shop tanks to those requirements, including saddles, skids and elevated supports that keep the bottom visible for inspection.

Field-erected tanks under COMAR 26.10.18

Field-erected tanks under COMAR 26.10.18 must be built of welded carbon steel or stainless steel to an industry standard, such as API 650, on a foundation designed and built under Annexes B and I of API 650 using field and laboratory testing and a professional engineer’s analysis. The foundation must carry the tank and its contents without excessive differential settlement and shed water from the tank base, and the completed system is tightness tested under NFPA 30 before oil goes in.

Shop-fabricated and field-erected tanks compared for a Maryland site
FactorShop-fabricated (COMAR 26.10.17)Field-erected (COMAR 26.10.18)
Typical sizeSized to fit a road shipment, commonly a few thousand to several tens of thousands of gallonsLarger terminal, plant and fire water storage
Construction standardUL, STI or API standard suited to the productWelded carbon or stainless steel to an API or other industry standard
FoundationSupports the tank, prevents uneven settling, drains water; engineer-designed where flood-proneAPI 650 Annexes B and I, with engineer analysis of site testing
PlacementElevated unless MDE approves an alternative with cathodic protectionOn grade, on the engineered foundation
Testing before serviceNFPA 30 tightness testNFPA 30 tightness test, plus the hydrostatic test of the construction standard
Site disruptionShort: delivery, setting, pipingLonger: foundation, plate erection, welding and testing on site

Containment requirements for aboveground storage tanks in Maryland

Containment requirements for aboveground storage tanks in Maryland call for a secondary containment dike around single-walled shop-fabricated tanks of 10,000 gallons or more, and around double-walled tanks of that size unless an exemption applies, sized to hold 110 percent of the capacity of the biggest vessel inside it where the dike is open to rain. A professional engineer designs the dike from the site’s soil and groundwater conditions, MDE approves it, and dikes around two or more tanks are subdivided as NFPA 30 directs.

The dike must also hold product until a release is found and removed. It passes a permeability test, either below 10 to the minus 4 centimeters per second or with a product level drop under 1 centimeter in 3 hours; a dike that fails is repaired or replaced within 90 days, and earthen dike results go to MDE within 60 days of the test. Paul Industries designs concrete and steel containment alongside the shell, so the dike, drain valve, supports and pipe penetrations are detailed together rather than fitted around equipment already set.

How often do above ground storage tanks need to be inspected in Maryland?

Above ground storage tanks in Maryland need a visual inspection at least monthly, and MDE requires proper venting on every regulated AST. Shop-fabricated tanks also receive an annual inspection that includes cleaning the normal and emergency vents, generally following the Steel Tank Institute’s SP001 standard, along with tank gauges, release detection and annual testing of that equipment; records of routine inspections and tests are kept for at least five years.

Inspection and record duties for a Maryland AST
IntervalWhat is checkedHow design helps
MonthlyShell, supports, piping, dike, drain valve, standing water, signs of releaseElevated supports and clear access around the shell shorten the walk-down
AnnuallyNormal and emergency vents cleaned, gauges and release detection testedVents reachable from a platform, gauges readable from grade
Periodic integrity inspectionShell and bottom thickness, welds, foundation, under STI SP001 or API 653 depending on the tankInspection nozzles, manways and bottom access built in
After repair or relocationNFPA 30 tightness test before return to serviceTest connections provided on the tank
RecordsRoutine inspections and tests kept at least five yearsTank data, drawings and test reports delivered as one file

Fuel tanks for generators, boilers and fleets

Fuel tanks for emergency generators, boilers and vehicle fleets are where most Maryland fuel tank regulations meet everyday buildings, because a hospital, data center or county garage often crosses the 2,500-gallon registration line with one main tank and can cross the 10,000-gallon permit line as the site grows. Day tanks of 250 gallons or less fall below the AST definition, while the main storage tank, its fill and transfer piping and its containment are regulated.

Data center campuses in Frederick County and the Baltimore suburbs, hospitals in Baltimore and the Washington suburbs, and county fleet yards each bring their own constraints: double-walled tanks where space for a dike is short, vaulted tanks where a fire code or appearance calls for them, and fuel polishing and transfer equipment for diesel held for long periods. Paul Industries builds and sets those tanks with the fuel piping, and the generator plant mechanical work around them is covered on data center mechanical contractors in Maryland.

Underground tanks and the move aboveground

The Maryland underground storage tank regulations sit in other chapters of COMAR 26.10, administered by the same Oil Control Program, and they govern the closure of a buried tank when an owner replaces it with an aboveground one. The new tank then falls under COMAR 26.10.17 from the day it is installed, with registration, foundation, elevation and inspection requirements that a buried tank never had. Paul Industries plans the aboveground replacement and its piping so the switch happens with the building’s fuel supply maintained.

Storage tank vs process tank: stainless tanks for Maryland plants

The difference between a storage tank vs process tank in a Maryland plant is that a storage tank holds a product until it is needed, while a process tank is part of the process itself, mixing, heating, cooling, holding or cleaning a product, and so carries agitators, jackets, spray devices, instruments and sanitary finishes. Process tanks for food, beverage, biotech and pharmaceutical plants are built in stainless steel, usually 304L or 316L, and often to ASME BPE for surface finish and drainability.

Plants that buy that equipment sit across the state: biotech and vaccine manufacturers on the I-270 corridor and in Frederick, pharmaceutical and food plants around Baltimore and Columbia, and poultry and vegetable processors on the Eastern Shore. Paul Industries fabricates mix, hold, CIP and buffer tanks for them and ties each one into the plant with sanitary process piping in Maryland, with product-contact surfaces finished through passivation services in Maryland. Anything that must hold pressure above 15 psig becomes a pressure vessel and is built as described on pressure vessel fabrication in Maryland.

Sanitary design decides how easily those vessels clean. Bottoms are sloped or dished to a single outlet, internal welds are ground flush and polished, spray balls or rotating spray devices are placed so every surface is wetted during CIP, and nozzles are kept short to avoid dead legs. Jackets for heating or cooling are tested before insulation and cladding go on, and the cladding is sealed so washdown water stays out of the insulation, a common source of corrosion under insulation in food plants. Every finish reading, weld log and pressure test is handed over with the equipment.

Terminals, the harbor and the Chesapeake Bay

Terminals and tank farms in South Baltimore, on the Fairfield and Wagners Point peninsula and in Curtis Bay, store gasoline, diesel, ethanol and heating oil for the region, and their tanks are field-erected units governed by COMAR 26.10.18. Work at those sites means new tanks, new bottoms, shell repairs, floating roof work and containment upgrades on an operating terminal, with the facility’s oil operations permit amended as storage changes.

Terminal owners also face a harbor that serves as a working port. Barge and ship berths, rail sidings and truck racks sit within the same fence line, so cranes, hot work and hydrostatic test water are scheduled with the terminal’s marine and loading operations, and test water is discharged under the facility’s permit. Paul Industries plans each lift, weld and test against that schedule, with hot work permits and gas testing run under the terminal’s safety program.

The Chesapeake Bay shapes tank work across the state. Waterfront plants, marinas and Eastern Shore facilities sit in flood-prone areas where anchorage against flotation, wetland and waterway authorization and engineered foundations are part of the design, and the containment, drainage and valve arrangement must keep oil out of the Bay’s tributaries. Paul Industries designs tank layouts with those site conditions in front of the engineer from the start.

Aboveground storage tank repair and replacement

Aboveground storage tank repair in Maryland covers shell and bottom repairs, nozzle replacements, new floors, coating and lining, roof repairs and relocation, and every repaired or relocated system is tightness tested under NFPA 30 before it returns to service. Large field-erected units are repaired against the findings of an API 653 inspection; shop-built units against an STI SP001 inspection or their own construction standard.

How long does a storage tank last? The answer depends on the product, the coating or lining, the bottom’s protection against corrosion from beneath, and how well water is kept out of the product and the dike; well-maintained welded steel tanks commonly serve for decades with bottom replacements along the way. Paul Industries prices repair and replacement side by side, cleans and gas-frees tanks before work through industrial tank cleaning, and welds repairs as part of its industrial welding services in Maryland.

How a project runs at an operating Maryland site

A project at an operating Maryland site runs in a fixed order: survey and permit review, design of the shell, foundation and containment together, fabrication while the foundation is built, delivery or erection, piping and instruments, testing, and the paperwork that closes the registration or permit change. Running fabrication and civil work in parallel is what keeps the outage short at a plant or terminal that cannot stop receiving product.

The survey comes first because Maryland sites differ so much. A Baltimore plant may offer a tight courtyard between buildings with overhead pipe racks and a crane path that must be planned to the inch; an Eastern Shore processor may offer open ground with a high water table and flood mapping that changes the foundation; a Western Maryland site may sit on rock that simplifies bearing but complicates excavation and drainage. Paul Industries surveys before designing, takes soil and groundwater data to the foundation engineer, and fixes the crane and delivery plan before the order is released.

Testing and turnover close the job. The finished system passes its NFPA 30 tightness test and any hydrostatic test its standard calls for, the gauges and release detection are proved, and the owner receives drawings, material records, weld and test reports and the data needed to update the Oil Control Program registration or permit. Process vessels in validated plants add the installation records the quality group signs before first use.

Public owners: prevailing wage on Maryland tank projects

Public owners in Maryland, from county water utilities and school systems to state agencies and transit yards, buy fuel, water and chemical storage under the state prevailing wage law when the contract reaches $250,000 and the state funds it, either through any state money for a state unit or through 25 percent or more of the cost for a county or other political subdivision. Paul Industries prices those projects with the wage determination that applies, keeps the payroll records the contracting agency asks for, and schedules the work around the facility’s operating hours.

How much does tank fabrication in Maryland cost?

The cost of tank fabrication in Maryland is driven by capacity, material and wall thickness, shop or field construction, the standard it is built to, internals and finish for process tanks, the foundation and containment, delivery and setting, and the piping, gauging and release detection that complete the system. Containment and foundations can rival the tank’s own cost on a tight or flood-prone site.

State permit charges are a minor line. MDE’s individual oil operations permits carry no fee, and the NPDES general permits for oil facility discharges carry a one-time $120 application fee paid with the notice of intent. Paul Industries gives a budget range from comparable tanks once the capacity, product and site are known, then a firm price after design, with the tank, foundation, containment and piping shown separately.

Who performs tank fabrication in Maryland?

Paul Industries performs tank fabrication in Maryland, designing, fabricating, supplying, erecting, setting, piping, testing and repairing storage and process tanks for terminals, chemical and food plants, biotech sites, hospitals, campuses and data centers. Paul Industries, an East Coast contractor formerly based in northern New Jersey and then Pennsylvania and now headquartered in Kilmarnock, Virginia, builds tanks for Baltimore, the I-270 corridor, Annapolis, Southern Maryland, Western Maryland and the Eastern Shore, across all 50 states and for sites outside the United States.

Plants in other states see the same work in the headquarters state on tank fabrication in Virginia and in Pennsylvania on tank fabrication in Pennsylvania. Tank connections and transfer lines are covered on process piping in Maryland.

Tanks from Paul Industries for Maryland owners

Paul Industries offers supply-only units, design-build storage systems with foundations and containment, and complete installation with piping, gauging and testing, for oil, chemical, water and sanitary process service across Maryland. To price a tank, send the product, capacity, dimensions or footprint, material, standard, the site and its flood exposure, and the facility’s current registration or oil operations permit. Call 201-450-8280 or request a quote. The Maryland hub gathers the other services Paul Industries brings to the state.

Standards referenced: COMAR 26.10 (Oil Pollution Control and Storage Tank Management) · COMAR 26.10.17 (Shop-Fabricated Aboveground Storage Tanks) · COMAR 26.10.18 (Field-Erected Aboveground Storage Tanks) · API 650 · API 653 · UL 142 · STI SP001 · NFPA 30 · NFPA 30A · ASME BPE

Frequently asked questions

Does Paul Industries fabricate fuel and chemical tanks for South Baltimore terminals and harbor plants?

Paul Industries fabricates, erects and repairs fuel and chemical tanks for terminals and plants in South Baltimore, including Curtis Bay, Fairfield and the harbor’s industrial waterfront. Field-erected tanks there are built to COMAR 26.10.18 on API 650 foundations, and work on an operating terminal is staged around product movements, with the facility’s oil operations permit updated as storage changes.

Who supplies stainless process tanks to Frederick and I-270 corridor biotech plants?

Paul Industries supplies stainless mix, hold, buffer, media and CIP tanks to biotech and vaccine plants in Frederick, Rockville, Gaithersburg and Germantown. Tanks are built in 304L or 316L to ASME BPE where product contact calls for it, with polished, passivated surfaces, sloped bottoms for full drainage and turnover records for qualification. Installation and sanitary piping into the suite can be part of the same order.

Which Eastern Shore plants does Paul Industries build tanks for, from Salisbury to Cambridge?

Paul Industries builds tanks for poultry, seafood and vegetable processing plants, grain and feed operations, water and wastewater systems, and fuel storage at plants and marinas across the Eastern Shore, from Salisbury to Easton and Cambridge. Many sites there are flood-prone, so foundations, anchorage against flotation and containment drainage are designed into each tank from the start.

Does a generator day tank count toward the Maryland AST registration threshold?

A tank of 250 gallons or less falls outside the AST definition in the 2022 rules, so a small day tank sits below it. The main storage tank feeding the generator, and any day tank larger than 250 gallons, counts toward the 2,500-gallon aggregate that triggers registration and the 10,000-gallon aggregate that triggers an oil operations permit.

When does a Maryland facility need an MDE oil operations permit?

A facility needs an Individual Oil Operations Permit when its aggregate aboveground oil storage reaches 10,000 gallons, when it stores 1,000 gallons or more of used oil in ASTs, when a marina AST system serves motor fuel dispensing, or when it runs a truck or rail loading rack, oil deliveries by cargo tanks of 500 gallons or more, or certain oil waste operations.

Is there a fee for Maryland aboveground storage tank registration or an oil operations permit?

MDE states that its individual oil operations permits carry no fee. Facilities that discharge stormwater or hydrostatic test water under an NPDES general permit for oil facilities pay a one-time $120 application fee with the notice of intent. Registration of AST systems is a filing with the Oil Control Program, and Paul Industries provides the tank data the filing needs.

Which rules apply to a Maryland tank installed before June 13, 2022?

Tanks and dikes completed before June 13, 2022 are existing systems under COMAR 26.10.17 and 26.10.18, and they were given two years from that date to comply unless MDE approved another period. Existing earthen dikes that had never been tested were due for testing within one year. A tank relocated after that date is treated like a new installation.

What do Maryland's dike rules require of an earthen containment area?

An earthen dike must be designed by a professional engineer for the site’s soil and groundwater, approved by MDE, and tested with an approved method. It passes with a permeability below 10 to the minus 4 centimeters per second or a product level drop under 1 centimeter in 3 hours, results go to MDE within 60 days, and a failing dike is repaired or replaced within 90 days.

Does a double-walled tank need a dike in Maryland?

Double-walled shop-fabricated tanks of 10,000 gallons or more need a dike unless they qualify for an exemption in COMAR 26.10.17, and MDE can require containment wherever a tank system poses a water pollution hazard. Smaller double-walled tanks rely on their interstitial space and monitoring. Paul Industries reviews the site and exemption before choosing between a double-walled tank and a diked single-walled one.

What test must a new or relocated Maryland AST pass before it holds oil?

Every new, repaired or relocated AST system is tightness tested under NFPA 30 after installation or repair and before it goes into service, under both COMAR 26.10.17 and 26.10.18. Field-erected tanks also complete the hydrostatic test their construction standard requires. Paul Industries runs the tests, records the results and hands them over with the tank’s drawings and data.

Must a shop-built oil tank in Maryland sit off the ground?

COMAR 26.10.17 requires a shop-fabricated AST system to be elevated unless MDE approves an alternative in writing, and an approved alternative needs a cathodic protection system that is installed, tested and maintained under the chapter. Elevation keeps the bottom visible for monthly inspection and away from moisture. Paul Industries supplies saddles, skids and supports sized for the full tank.

How are stainless steel tanks made for Maryland food and biotech plants?

Stainless sheet or plate is cut, rolled into shell courses and welded, heads are formed and welded on, and nozzles, jackets and manways are added before internal welds are ground and polished to the specified finish. The tank is pressure or leak tested, cleaned and passivated, and shipped capped. Sanitary tanks carry weld logs, surface finish readings and material records for the plant’s quality file.

How long do stainless steel tanks last in Maryland process plants?

Stainless tanks in food and biotech service commonly run for decades when chloride exposure, cleaning chemistry and passivation are kept under control. Rouging, pitting at welds and damage to jackets or insulation are the usual reasons for repair. Paul Industries restores surfaces, repairs welds and jackets, and replaces nozzles to extend the life of existing tanks before a new one is needed.

What should a Maryland plant look for in tank fabrication companies?

Storage tank builders differ most in what they deliver around the shell. Look for design to the right standard for the product, material traceability, qualified welding procedures, documented testing, and the ability to deliver the foundation, containment, setting and piping under one contract so the COMAR 26.10 requirements are met as a system. Paul Industries designs, builds, installs and tests the whole tank system and delivers its records as one file.

Do flood-prone Maryland sites need special tank anchoring?

Tanks in flood-prone locations must be anchored to prevent flotation in line with NFPA 30A, and a shop tank’s foundation there must be designed by a professional engineer from field and laboratory testing. Waterfront Baltimore, Annapolis and Eastern Shore sites often fall in this group. Paul Industries designs anchorage for the empty tank under flood conditions, the case that governs flotation.

What approvals come before a tank is set near Chesapeake Bay wetlands or waterways?

Before a new or replacement AST system or containment dike is installed, the owner obtains any wetland or waterway authorization that COMAR 26.10.01.04E requires, along with the oil registration or permit update and any county building permit. Paul Industries prepares the tank, foundation and containment drawings those applications need and builds the schedule around them.

Which drawings and data start a Maryland tank quotation?

A product name, capacity, preferred dimensions or available footprint, material, design standard, site location and flood exposure are enough to start, along with the facility’s current registration or oil operations permit if the tank holds oil. For process tanks, add the finish, agitation, jacket and nozzle list. Paul Industries returns a budget range first and a firm price after design.

Planning a new or replacement tank in Maryland?

Send the product, capacity, footprint, material and site, with the facility’s current tank registration or permit. Call 201-450-8280 or request a quote.