Paul Industries provides pressure vessel fabrication in Delaware, designing and building ASME Section VIII reactors, receivers, separators, jacketed vessels and process tanks for chemical, refining, pharmaceutical and food plants, and documenting each one for registration and certificate inspection with DNREC’s Boiler Safety Program. Delaware regulates unfired pressure vessels under the same Chapter 74B law that covers boilers, so a new vessel needs its ASME marking, a National Board or “USER” number, an installation registration and a certificate of inspection before it runs. Paul Industries carries the vessel from data sheet to the inspector’s first visit.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Governing rules Chapter 74B of Title 7 and Regulation 1353
Required marking ASME Code symbol with a National Board number or "USER"
Certificate inspection Every four years, more often in corrosive or lethal service
Pressure exemption Unfired vessels at 15 psig or less
Size exemption 5 cu ft at 250 psig, 1.5 cu ft at 600 psig, or 6 in. inside diameter
Reviewed November 2026

What does pressure vessel fabrication in Delaware involve?

Pressure vessel fabrication in Delaware involves the engineering and welding of a code vessel, the shop inspection and testing that ASME Section VIII requires, and the Delaware steps that follow delivery: installation registration, a first inspection that assigns a Delaware State Number, and a certificate of inspection renewed on a four-year cycle. The construction code is national; the registration, exemptions, inspection cycle and fees are Delaware’s.

The national steps, from design calculations and material selection to hydrostatic testing and code stamping, are covered on the pressure vessel fabrication page. This page goes into the Delaware rulebook, the plants in the state that buy vessels, and the questions owners in New Castle, Kent and Sussex counties ask before they order one. The Delaware overview lists the other process systems Paul Industries builds in the state.

What makes a vessel a pressure vessel under Delaware law?

Delaware law answers what makes a vessel a pressure vessel in one line of 7 Del. C. 7402B: a pressure vessel is a container for the containment of pressure, internal or external, whether that pressure comes from an outside source or from heat applied directly or indirectly. DNREC’s own examples are everyday plant equipment: carbon dioxide, oxygen, nitrogen and ammonia tanks, refrigerant receivers and air receivers. Jacketed cooking kettles built and stamped to Section VIII, Division 1 are named in the statute too.

Delaware pressure vessel laws then remove a long list of equipment from the program. Exemptions cover vessels under federal inspection, transport and storage vessels under the US Department of Transportation, air tanks on vehicles and on railroad rights of way, vessels under the control of the State Fire Marshal, and the size and pressure limits in the table below. A vessel that falls outside the program still has to be built correctly; the exemption removes the state registration and inspection, not the engineering.

Unfired vessels outside Chapter 74B, from 7 Del. C. 7401B(c)
ExemptionLimit in the statuteTypical plant example
Small volume at moderate pressure5 cubic feet or less and 250 psig design pressure or lessSmall instrument air receiver
Smaller volume at higher pressure3 cubic feet and 350 psig, or 1.5 cubic feet and 600 psigHydraulic accumulator, gas sample bottle
Small diameterInside diameter, width, height or cross-section diagonal of 6 inches or less, any length or pressurePipe-built filter housing, small strainer body
Low pressureInternal or external operating pressure of 15 psig or lessAtmospheric and low-pressure storage tanks
Cold water with an air cushionWater at ambient temperature, 120 gallons or lessHydropneumatic and expansion tanks
Water filters and softenersWater at ambient temperature, 300 psig or lessMultimedia filters and softener vessels
Other agenciesFederal inspection, US DOT, State Fire Marshal, vehicle and rail air tanksCylinders, tank trailers, fire protection vessels

The 15 psig line decides many projects. A process tank designed for 15 psig or less sits outside Chapter 74B and, if it holds a regulated substance, inside Delaware’s aboveground storage tank rules instead, which are covered on the tank fabrication in Delaware page. Above 15 psig, the same tank becomes a pressure vessel and the Boiler Safety Program takes over.

How Delaware wants a new vessel built and marked

Delaware wants every boiler, pressure vessel and component installed in the state designed, fabricated, inspected, stamped and installed to the current applicable section of the ASME Boiler and Pressure Vessel Code and to Regulation 1353. For unfired vessels that means Section VIII, Division 1 for most process equipment and Division 2 where higher design stresses and more detailed analysis pay for themselves on large or high-pressure vessels.

The marking rule is specific. A vessel carries the ASME Code symbol with a National Board registration number, or the ASME Code symbol with the word “USER” for a vessel built under the user’s own program, and electrically heated vessels also carry the listing of a nationally recognized testing laboratory. The stamping must stay visible for inspection and may not be permanently covered, which matters for insulated and jacketed vessels: the nameplate is mounted on a standoff bracket or the insulation is built with a removable section over it. Shop inspections required by the ASME Code are made by an inspector holding a National Board commission.

A vessel of special design that cannot be built and stamped to the ASME Code needs a State Special permit before construction. The Delaware user applies in writing, and the drawings, design data, calculations and specifications are prepared by a registered professional engineer who knows the code of construction. The statute sets the permit fee at a $500 minimum. Paul Industries designs to the ASME Code from the start, so the State Special route is reserved for genuinely unusual equipment.

Delaware pressure vessel registration: from delivery to the first certificate

Delaware pressure vessel registration starts with the installer: the installation of any covered vessel in a place of public assembly is registered with the Boiler Safety Program before the vessel operates, using DNREC’s installation registration form, so the first inspection can be scheduled. Chapter 74B then requires a certificate of inspection before operation, while allowing a newly installed vessel to be operated for the testing needed to get that certificate.

What is a pressure vessel permit in Delaware, then? For an ordinary ASME vessel, the state’s permission to operate is the certificate of inspection, not a separate construction permit; the one vessel permit Chapter 74B names is the State Special for non-code designs. The first inspection is recorded on National Board Form NB-7 or the Delaware First Inspection Report, the inspector gives the vessel its Delaware State Number with a decal, and once the report and fee reach the program the certificate goes up beside the vessel.

How a new vessel moves from order to a Delaware certificate
StepWhat happensPressure vessel documentation produced
1. Data sheet and designDesign pressure and temperature, corrosion allowance, materials, nozzles, supports and service fluid fixedCode calculations and general arrangement drawing
2. Fabrication and shop inspectionWelding to qualified procedures, examinations, inspector hold pointsWeld map, material test reports, examination records
3. Pressure test and stampingHydrostatic or pneumatic test witnessed by the inspectorManufacturer’s Data Report and nameplate with ASME symbol and National Board number
4. Delivery and settingRigging, setting, anchoring, piping and relief device installationInstallation records and relief valve data
5. Installation registrationInstaller registers the vessel with the Boiler Safety Program before operationDNREC installation registration form
6. First inspectionCommissioned inspector inspects, assigns the Delaware State Number, leaves a decalNB-7 or Delaware First Inspection Report, filed within 30 days
7. CertificateProgram issues the certificate of inspection once the fee is paidCertificate posted on or near the vessel

How often do pressure vessels need to be inspected in Delaware?

Delaware answers how often do pressure vessels need to be inspected with a four-year cycle: Regulation 1353 gives every covered pressure vessel a certificate inspection every four years, normally an external inspection unless the inspector calls for an internal one. The inspector may require more frequent inspections, or an internal inspection, when the vessel sees corrosive conditions or lethal service.

A Delaware pressure vessel inspection is carried out by an inspector holding a National Board commission and a Delaware commission, whether employed by the state, by an insurance company, or by an owner-user organization the program recognizes for vessels the company owns and operates. Relief valves are part of each visit: pressure vessel relief valves have their set pressure checked by hand or on a test bench at the inspection or inside the permitted interval, the interval can be extended on the strength of the user’s performance records, and where in-service testing is impractical because the fluid is hazardous or costly, valves are bench tested or replaced every five years and the work documented.

Plants with an API 510 program often inspect vessels more often than the state cycle requires, because API 510 sets intervals from measured corrosion rates. Paul Industries builds new vessels with the inspection openings, thickness monitoring locations and nameplate access those programs need, and supplies the baseline thickness data with the vessel.

Vessels for Delaware’s chemical, refining, pharmaceutical and food plants

Delaware’s vessel demand follows its process industries: specialty chemical and materials plants along the Delaware River in New Castle County, the Delaware City refinery, pharmaceutical and biotech sites in Wilmington and Newark, and poultry and food processing across Kent and Sussex counties on the Delmarva peninsula. Each brings its own service fluids, materials and design questions.

Two facts show the range. Croda’s Atlas Point site in New Castle commissioned the first plant in the United States to make ethylene oxide from bio-ethanol, a roughly $170 million investment, and ethylene oxide is the kind of reactive, toxic service where vessel design, relief and inspection get the closest attention. At the other end of the state, poultry plants run ammonia refrigeration receivers, air receivers and hot water storage around the clock. Between them, the Delaware City refinery reports a crude unit capacity of 190,000 barrels per day in its operator’s federal filings, with the separators, drums and exchangers that scale implies.

Vessel types and design points by Delaware industry
IndustryTypical vesselsDesign points that drive the build
Specialty chemicals and materialsReactors, jacketed kettles, receivers, columns, knockout drumsLethal service rules, alloy selection, relief sizing for runaway reactions
Refining and fuelsSeparators, accumulators, drums, filter housingsCorrosion allowance, sour service materials, API 510 inspection access
Pharmaceutical and biotechBioreactors, media and buffer vessels, clean steam and WFI tanksASME BPE finishes, full vacuum rating, steam-in-place cycles
Poultry and food processingAmmonia receivers, air receivers, hot water and cook vesselsLow-temperature materials for refrigerant service, sanitary finishes for product contact
Hospitals, campuses and utilitiesExpansion tanks, deaerators, steam accumulators, autoclavesQuick-opening closures, cyclic pressure, registration as public assembly equipment

Lethal service changes the build more than any other Delaware design input. When a vessel holds a lethal substance under Section VIII, Division 1, butt welds are fully radiographed and carbon and low alloy steel vessels are postweld heat treated, and Regulation 1353 lets the inspector require extra in-service inspections for the same reason. Paul Industries confirms the service classification with the plant’s process safety team before material is ordered, because it sets the examination, heat treatment and schedule. More on chemical plant work is on the chemical manufacturing page.

New vessels inside Delaware’s coastal zone

Delaware’s Coastal Zone Act shapes where and how new process capacity is added, because much of the state’s heavy industry sits inside the coastal zone along the Delaware River and Bay. Since 1971 the act has prohibited new heavy industry uses in the zone, allowed new manufacturing only by permit, and required a permit for any expansion of a use that existed in 1971. A 2017 amendment created conversion permits for new heavy industry uses on 14 existing heavy industry sites.

For a vessel project, the question is whether the work increases the overall processing capability of the facility, which is how DNREC defines an expansion. A like-for-like replacement reactor rarely changes capacity; a larger reactor or a new process train may. DNREC offers status decisions that settle which permit, if any, applies. Paul Industries supplies the capacities, process descriptions and drawings that the plant’s permit team needs for that review, so the vessel schedule and the permit schedule move together.

Delivery and setting at Delaware sites

Delivery and setting at Delaware sites are planned from the vessel’s dimensions and weight before fabrication starts, because a vessel that is easy to build can still be hard to move through a plant gate or into a building. Paul Industries prefabricates vessels off site and plans pressure vessel shipping by road, with oversize permits where the diameter calls for them, and the Port of Wilmington, a deep-water port at the confluence of the Christina and Delaware rivers, is an option for oversized pieces.

On site, the work covers rigging and setting, anchor bolts and grout, nozzle connections, relief devices and their discharge piping, insulation with a visible nameplate, and clearance for maintenance and inspection, which Regulation 1353 requires around every vessel. Pressure testing of connected piping and the vessel’s tie-ins is covered under process piping in Delaware, and witnessed hydrotests on site follow the hydrostatic testing procedure.

Repairs, rerates and relocations of Delaware vessels

Repairs and alterations to Delaware pressure vessels follow the same route as boiler repairs: the original construction standard, the National Board Inspection Code and Regulation 1353, with a Delaware-commissioned inspector approving the work and the National Board R program covering welded repairs. Can pressure vessels be welded after years in service? They can, with an R-1 filed for repairs and an R-2 with the manufacturer’s data report for alterations such as a rerate or a new nozzle, both carrying the Delaware jurisdiction number.

Where do pressure vessels fail in Delaware plants? Most findings sit at nozzles, supports and saddles, the liquid line in storage service, corrosion under insulation on outdoor vessels, and weld heat-affected zones in cyclic or corrosive duty. When a vessel leaves Delaware for repair, the shipment is recorded on an R form whose copies are sent to the Boiler Safety Program. Older nonstandard vessels installed before June 30, 1974 are rated under Section VIII with a factor of safety of at least 4, and a nonstandard vessel removed from Delaware for any reason other than repair cannot be brought back. Boiler-side repairs follow the same reporting and are covered on boiler repair in Delaware, and field welding on connected equipment under industrial welding services in Delaware.

How are pressure vessels made for a Delaware order?

Pressure vessels for a Delaware order are made in a fixed sequence: plate and heads are cut and formed, shell courses are rolled and seam welded, heads and nozzles are fitted and welded to qualified procedures, welds are examined, the vessel is heat treated where the code or service requires it, and the finished vessel is pressure tested in front of the inspector before stamping. Steel pressure vessel fabrication in carbon steel suits most utility and hydrocarbon service; stainless and nickel alloys take over for chemical, pharmaceutical and food duty.

High pressure vessel fabrication adds thicker sections, more examination and, often, Division 2 design. Industrial vessel fabrication for sanitary service adds polished product-contact surfaces, drainable geometry and electropolishing, and connects to the plant’s clean utilities, which are covered on CIP and SIP systems in Delaware. Pressure vessel requirements by state differ mostly after the stamp: the ASME build is the same for a vessel bound for Delaware, Virginia or Maryland, and the differences sit in registration, exemptions and inspection cycles.

Records a Delaware vessel owner keeps for each vessel

A Delaware vessel owner keeps a file for each registered vessel that begins with the fabrication records and grows with every inspection, repair and relief valve test, because inspectors, insurers and the plant’s process safety program all draw on it. The Boiler Safety Program holds the registration, inspection reports and R forms; the owner holds everything that explains why the vessel is fit for its service.

The working file behind a registered Delaware pressure vessel
RecordWhere it comes fromWhen it is used
Manufacturer’s Data Report (U-1 or U-1A)Fabrication, signed by the shop inspectorRegistration, rerates, alterations and resale
Design calculations and drawingsVessel designRerates, new nozzles and process changes
Material test reports and weld mapFabricationRepairs, which follow the original materials and procedures
Baseline thickness readingsDeliveryCorrosion rate and remaining life at each inspection
Delaware certificate and inspection reportsBoiler Safety Program and the commissioned inspectorEvery four-year cycle and any insurance review
Relief valve data and test recordsInstallation and each testInspection visits and process hazard analyses
R-1 and R-2 formsEach repair or alterationKept for the life of the vessel

Paul Industries delivers the first five records with each new vessel in one indexed package, electronic and paper, and adds the R forms when it repairs or alters a vessel later. Plants that bought vessels years ago without a complete file can have Paul Industries rebuild what is missing from the nameplate, the National Board registry and field measurements, which shortens the next inspection and any rerate study.

How much does pressure vessel fabrication in Delaware cost?

The cost of pressure vessel fabrication in Delaware is driven by the vessel itself: diameter, length and wall thickness, material grade, the number and size of nozzles, internals and jackets, examination and heat treatment, surface finish, and the delivery and setting work. Pressure vessel costs rise sharply with alloy content and with lethal service examination, and fall when a standard head and shell size can be used.

Delaware’s state charges are small and published. Under 7 Del. C. 7406B, a four-year pressure vessel certificate costs $120, and the inspection fee is $50 for a vessel of 50 square feet or less plus $20 for each additional 100 square feet or fraction, with the area taken as external diameter times external length in feet. An 8 foot by 20 foot vessel works out to 160 square feet and a $90 inspection fee. Paul Industries prices the vessel from a data sheet with a budget range from comparable scope, then a firm price once the design is calculated and materials are quoted.

Who fabricates pressure vessels for Delaware plants?

Paul Industries fabricates pressure vessels for Delaware plants, from carbon steel receivers and separators to stainless jacketed reactors and sanitary process vessels, and delivers, sets and connects them. Headquartered at 256 Shore Drive, Kilmarnock, Virginia, and formerly based in northern New Jersey and then Pennsylvania, Paul Industries takes vessel work throughout Delaware, in all 50 states and at plants abroad. The same scope is described for the headquarters state on pressure vessel fabrication in Virginia, and for neighboring markets on pressure vessel fabrication in Maryland and pressure vessel fabrication in New Jersey.

Plants comparing ASME pressure vessel fabricators should look at three things: whether the price includes the data report, National Board registration, delivery and setting; whether the schedule shows the inspector’s hold points; and whether the same contract covers the piping, relief devices and first Delaware inspection. Paul Industries quotes all of those as one scope.

Pressure vessel work from Paul Industries in Delaware

Paul Industries designs, fabricates, supplies, installs, tests and repairs pressure vessels for Delaware plants, including pressure vessel fabrication in Wilmington and New Castle County for chemical and pharmaceutical sites and vessels for refining, poultry, food and institutional plants statewide. Each vessel arrives with its Manufacturer’s Data Report and National Board number, is set and connected, and is ready for the installation registration and first inspection that DNREC’s pressure vessel program requires. Owners can buy the vessel alone, order a design-build package, or have Paul Industries install it complete. Send the data sheet or process conditions and request a quote.

Standards referenced: 7 Del. C. Chapter 74B, Boiler Safety Program · 7 DE Admin. Code 1353, Boiler Safety Regulations · ASME Boiler and Pressure Vessel Code, Section VIII, Divisions 1 and 2 · National Board Inspection Code (NBIC) · 7 DE Admin. Code 1352, Aboveground Storage Tanks · Delaware Coastal Zone Act, 7 Del. C. Chapter 70 · API 510

Frequently asked questions

Which firm builds reactors and receivers for chemical plants around Wilmington, New Castle and Delaware City?

Paul Industries builds reactors, receivers, knockout drums and jacketed vessels for chemical and refining plants in Wilmington, New Castle, Edgemoor and Delaware City. Many of those sites sit in the coastal zone and handle toxic or flammable fluids, so the vessel scope includes lethal service examination where it applies and the drawings the plant needs for any Coastal Zone Act review.

Does Paul Industries supply process vessels to pharmaceutical and research sites in Newark?

Paul Industries supplies stainless process vessels, bioreactor shells, buffer and media vessels and clean utility tanks to pharmaceutical, biotech and research sites in Newark and along the I-95 corridor. Those vessels are usually rated for full vacuum and steam-in-place, carry ASME BPE finishes, and arrive with the material and finish records validation teams request.

Who fabricates ammonia receivers and air receivers for poultry plants in Sussex and Kent counties?

Paul Industries fabricates ammonia receivers, accumulators, air receivers and hot water vessels for poultry processors and food plants in Georgetown, Millsboro, Seaford, Milford, Dover and across the Delmarva peninsula. DNREC lists ammonia tanks and air receivers as pressure vessels, so each one is registered, inspected and given a Delaware State Number before service.

Does a small air receiver need a Delaware certificate?

It depends on size and pressure. An air receiver of 5 cubic feet or less designed for 250 psig or less, or one with an inside diameter of 6 inches or less, falls outside Chapter 74B. Larger receivers, which includes most plant compressor receivers, are covered and need registration and a certificate inspection every four years.

Are hydropneumatic and expansion tanks regulated in Delaware?

Tanks holding water at ambient temperature with a capacity of 120 gallons or less, including those with an air or gas cushion, are exempt under 7 Del. C. 7401B(c)(7). Larger expansion and hydropneumatic tanks, and any tank holding heated water, are pressure vessels under Chapter 74B unless another exemption applies, and are registered and inspected like other vessels.

Does a jacketed cooking kettle count as a pressure vessel in Delaware?

Yes. Chapter 74B defines a jacketed cooking kettle as a gas or electrically fired kettle built and stamped to ASME Section VIII, Division 1, and kettles with steam jackets fed from a plant boiler are unfired pressure vessels as well. Food plants in Delaware register and inspect them with the rest of their vessels.

What is a pressure vessel permit, and when does Delaware require one?

The one vessel permit Chapter 74B names is the State Special, for equipment of special design. A vessel that cannot carry ASME stamping needs a State Special permit before construction starts; the request comes from the Delaware user, with a registered professional engineer’s drawings and calculations, and Chapter 74B prices the permit from $500 upward. Paul Industries designs vessels to ASME Section VIII, which avoids that route for nearly all process equipment.

What does the USER marking on a Delaware vessel mean?

Regulation 1353 accepts a vessel stamped with the ASME Code symbol and either a National Board number or the word USER. The USER marking applies to vessels built under the user’s own program instead of being registered with the National Board. Both satisfy the Delaware marking rule, provided the stamping stays visible for inspection.

Who carries out a Delaware pressure vessel inspection during and after fabrication?

Shop inspections required by the ASME Code are made by an inspector holding a valid National Board commission, who reviews materials, welding, examinations and the pressure test before the vessel is stamped. After installation, the first Delaware inspection is made by an inspector holding a Delaware commission, who assigns the Delaware State Number.

Can a company's own inspectors inspect its Delaware pressure vessels?

Regulation 1353 allows an inspector employed by an owner-user, or by an organization holding State of Delaware Owner/User commissions, to inspect pressure vessels owned and operated by that company in place of a state or insurance company inspector. Large chemical and refining plants often run their vessel inspections this way under an API 510 program.

How often are pressure relief valves on Delaware vessels tested?

Pressure vessel relief valves are hand or bench tested for set pressure at the time of inspection or within the allowed inspection interval, and the interval can be extended when the user’s performance records support it. For hazardous or costly fluids where in-service testing is impractical, valves are bench tested or replaced every five years, and the work is documented.

What happens to a Delaware vessel's records when it is rerated?

A rerate is an alteration, so it is approved by a Delaware-commissioned inspector and reported on a National Board R-2 form with a copy of the manufacturer’s data report, filed with the Boiler Safety Program under the Delaware jurisdiction number. The nameplate is supplemented with the new rating, and the certificate reflects the revised conditions.

Can a used pressure vessel be moved into a Delaware plant?

A secondhand or reinstalled vessel is installed to the current ASME Code and the Delaware rules, needs traceable stamping and data reports, and is registered and inspected before service. Nonstandard vessels removed from Delaware cannot return. Paul Industries reviews a used vessel’s data report, thickness readings and repair history before the plant commits to it.

Does a new reactor in Delaware's coastal zone need a Coastal Zone Act permit?

It can. New manufacturing uses and expansions of existing uses in the coastal zone are allowed by permit only, and DNREC treats an increase in a facility’s overall processing capability as an expansion. A like-for-like replacement often does not change capacity, while a larger reactor might. A DNREC status decision settles the question for a specific project.

What is the Delaware inspection fee for a large pressure vessel?

The fee is $50 for a vessel of 50 square feet or less and $20 for each additional 100 square feet or fraction, using external diameter times external length in feet. A 10 foot by 40 foot column at 400 square feet costs $50 plus four $20 increments, or $130, and the four-year certificate adds $120.

How long does a new ASME vessel take to reach service in Delaware?

The schedule is set by design approval, material lead times, fabrication and examination, heat treatment, delivery and setting, then installation registration and the first inspection. Alloy plate and forgings usually set the critical path. Paul Industries gives a schedule with the inspector’s hold points and the Delaware registration step shown, so the plant can plan startup around them.

Do vessels at a Delaware data center or hospital need registration?

Yes, when they fall inside Chapter 74B. Expansion tanks above the exemption limits, air receivers, deaerators, steam accumulators and autoclaves at hospitals, campuses and data centers are registered and inspected, because those buildings are places of public assembly under Delaware law. Paul Industries documents each vessel for the installer’s registration form.

What information starts a Delaware pressure vessel quote?

Send design pressure and temperature, vacuum rating, service fluid and whether it is lethal or corrosive, capacity and dimensions, materials, nozzle list, internals or jacket, finish, support type, and the site and access details. Paul Industries returns a budget range, a schedule and a list of the Delaware records the vessel will carry.

Ordering a pressure vessel for a Delaware plant?

Send the data sheet or the process conditions, materials, nozzle list and the site where the vessel will be set. Call 201-450-8280 or request a quote.