Paul Industries is a US process equipment contractor for Slovakia that engineers, fabricates and commissions pressure vessels, deionized and purified water systems, process cooling, wastewater treatment skids, tanks and process piping for car and battery plants, the Bratislava refinery and chemical sites, and pharmaceutical and food plants, built to the EU Pressure Equipment Directive and Slovak rules and wired for 400 V at 50 Hz. Equipment leaves a US East Coast port, lands at Hamburg, Bremerhaven or Koper and reaches the plant by rail or road with Slovak-language instructions, with Paul installing and commissioning it or supervising the installation. From its headquarters at 256 Shore Drive, Kilmarnock, Virginia (the company was formerly based in northern New Jersey, then Pennsylvania), Paul Industries takes work in all 50 states and at plants abroad.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Pressure equipment rules NV 1/2016 (PED) and Decree 508/2009
Power 230/400 V, 50 Hz; 22 kV distribution
Medicines regulator SUKL, PIC/S since 1997
Sea gateways Hamburg, Bremerhaven, Koper by rail
VAT 23 percent standard rate since 2025
Reviewed November 2026

Hiring a US process equipment contractor for Slovakia: scope and delivery routes

A US process equipment contractor for Slovakia takes a plant system from the owner’s requirements to a running, documented installation: process and mechanical design, fabrication and testing in the United States, export, site installation, start-up and handover. Paul Industries designs and builds pressure vessels, deionized water systems, purified water and WFI systems, process cooling systems, wastewater and effluent treatment and the piping that ties them together.

Slovak buyers pick one of three routes. Supply with supervision fits a plant building a new hall under its own construction contract: Paul ships the equipment and directs setting, alignment, hook-up and testing. Design-build adds the utility layout, room integration and controls. Turnkey delivery covers everything from the first process study to executed acceptance protocols under a single contract. Slovakia sits in the Central and Eastern Europe group on Paul’s international projects page, which lists every country where the company takes work, and quotes for Slovak projects are issued in US dollars.

Car manufacturers in Slovakia and the utilities their plants run on

Car manufacturers in Slovakia built about 1.07 million vehicles in 2025, or 196 cars per 1,000 inhabitants, which the Slovak automotive industry association ZAP reports as more per head than any other country. The answer to what is Slovakia known for producing is therefore cars first, and the Slovakia car manufacturing industry drives demand for paint shop water, cooling, compressed air and wastewater systems across the west and north of the country.

Volkswagen Slovakia in Bratislava built 336,905 vehicles in 2025, and Kia Slovakia at Teplička nad Váhom near Žilina built 296,550, including the Sportage, Ceed and EV4. Stellantis Trnava assembles the Citroën C3, ë-C3 and C3 Aircross and the Opel Frontera, and JLR Nitra builds the Defender. These plants are named as market facts about where Slovak demand sits; they describe no Paul project.

Car plants in Slovakia as market facts, and the systems such plants buy
PlantLocationStatus in 2026Systems Paul Industries supplies to plants of this type
Volkswagen SlovakiaBratislavaOperating, 336,905 vehicles in 2025Pretreatment and DI water, paint shop chilled water, wastewater pretreatment
Kia SlovakiaTeplička nad Váhom, Žilina regionOperating, 296,550 vehicles in 2025Process chillers, cooling towers, compressed air piping
Stellantis TrnavaTrnavaOperating, Citroën and Opel modelsGlycol cooling, tank farms, oil and water separation
JLR NitraNitraOperating, Defender productionPaint shop utilities, closed-loop cooling, process piping
Volvo CarsValaliky, near KošiceTest builds since September 2026, series production planned for 2027Cooling plant, water treatment, utility piping for a new EV plant
Gotion-InoBatŠuranyUnder construction, first phase 20 GWhDry room chilled water, DI water, solvent and wastewater handling

How many car factories in Slovakia build vehicles today?

Four car factories in Slovakia build vehicles in series today, at Bratislava, Teplička nad Váhom, Trnava and Nitra, and a fifth is preparing for series output. The Volvo car plant in Slovakia, at Valaliky near Košice, started its first shift in September 2026 with test builds, plans series production in 2027 and is designed for up to 250,000 electric cars a year. Cars made in Slovakia therefore come from plants that keep adding lines, and every new body shop or paint shop needs new process utilities.

The Slovakia battery factory projects

Battery cells are the newest part of the supply chain: InoBat has run a pilot cell line at Voderady since 2024, and the Gotion-InoBat Slovakia battery factory at Šurany has been under construction since October 2025, with a first phase of 20 GWh and series production planned for 2027. Cell plants need dry rooms held at very low dew points, large chilled water plants, ultrapure and deionized water, and careful handling of solvents and process wastewater. Paul builds those utility systems as skids and modules, documented for EU product rules, so the new building receives finished, tested units.

Slovnaft refinery, Duslo and the chemical producers

The Slovnaft refinery in Bratislava is an integrated refining and petrochemical complex owned by MOL Group, and the Slovnaft refinery capacity is about 6.1 million tonnes of crude a year, roughly 124,000 barrels a day. The Slovnaft refinery Bratislava site also co-processes renewable feedstocks into sustainable aviation fuel and hydrotreated vegetable oil, which adds hydrogen, heat exchange and storage duty to a classic refinery layout.

Duslo at Šaľa, part of the Agrofert group, makes ammonia and nitrogen fertilizers and runs a further unit in the Strážske industrial park in the east. Refining and fertilizer plants buy pressure vessels, heat exchanger bundles, pump skids, alloy and carbon steel piping, relief systems and cooling water treatment, much of it timed to planned shutdowns. Paul fabricates that equipment to the PED and EN 13445 or ASME Section VIII as the owner specifies, with material traceability and weld records, and its chemical manufacturing page shows the range of systems it builds for process plants.

Pharmaceutical companies in Slovakia and the food plants beside them

Pharmaceutical companies in Slovakia work under ŠÚKL, the State Institute for Drug Control, whose inspectors audit plants against EU GMP and issue GMP certificates entered in the EU EudraGMDP database; Slovakia joined the PIC/S scheme in January 1997. Saneca Pharmaceuticals in Hlohovec, with about 1,000 staff, is the biggest finished-dose site, and the government approved 17.45 million euros of investment aid for it in February 2026. Biotika at Slovenská Ľupča makes active ingredients by fermentation, and Imuna Pharm works at Šarišské Michaľany.

Slovakia pharma companies need purified water and WFI, clean steam, compounding vessels, CIP and SIP, fermentation utilities and process cooling, qualified to EU GMP and, for sterile products, to the revised Annex 1 in force since August 2023. The Slovakia pharmaceutical industry is compact, so a single water system or vessel train is often the critical item in a site expansion. Paul designs those systems to ASME BPE and the European Pharmacopoeia, writes the qualification protocols in the plant’s format and executes them, as described on its pharmaceutical industry page.

Food and beverage plants in Slovakia

Food and beverage producers round out the major industries in Slovakia: Meggle Slovakia runs the Rajo dairy in Bratislava, Tatranská mliekareň makes dairy products in Kežmarok, Heineken brews Zlatý Bažant at Hurbanovo, and the AGRANA group runs the sugar factory at Sereď. Those plants buy sanitary tanks, pasteurizer and holding tube packages, CIP skids, glycol and ammonia cooling, and wastewater pretreatment, all built with drainable layouts and hygienic welds. Paul’s dairy processing page covers the systems a milk plant runs on.

Shutdown windows and tie-ins at operating Slovak plants

Shutdown windows decide how new equipment joins an operating Slovak plant, because car lines, refinery units and GMP suites stop for short planned periods and every tie-in has to fit inside them. Paul plans the work backward from the shutdown date: hot taps and isolation points are surveyed in advance, spools are prefabricated and hydrotested in the United States, skids arrive pre-wired and pre-tested, and the field scope during the stop is reduced to setting, bolting, welding the final closures and signal checks. For GMP areas the same plan covers gowning, material transfer through airlocks, cleaning after the work and the change control the quality unit needs before the room returns to production.

Taken together, Slovakia manufacturing companies span cars and parts, refining and chemicals, medicines, food, and metals and machinery, and the Slovakia manufacturing sector buys the same core utilities in each: water treatment, cooling, compressed air, steam and process piping.

Which Slovak rules apply to a vessel or skid built in the United States?

A vessel or skid built in the United States for a Slovak plant meets two sets of rules: the EU Pressure Equipment Directive 2014/68/EU, which Slovakia applies through Government Regulation 1/2016 Z.z., for placing it on the market, and the Slovak occupational safety rules in Act 124/2006 Z.z. and Decree 508/2009 Z.z. for putting it into operation and inspecting it. Regulation 1/2016 covers equipment with a maximum allowable pressure above 0.5 bar, sorts it into categories I to IV with matching conformity modules, involves a notified body for the higher categories, and was last amended by Regulation 97/2026 with effect from 30 May 2026.

Groups A and B under Decree 508/2009

Decree 508/2009 classes pressure equipment as reserved technical equipment in group A or group B, by pressure, volume and the hazard of the medium, with everything below the thresholds in group C. Group A equipment needs an expert opinion on its design documentation and an official test by an authorized legal entity, which issues its certificate within 30 days; Technická inšpekcia, a.s. holds an authorization for official tests of pressure equipment. Groups A and B both need an expert inspection and test after installation and before first operation, and Annex 5 of the decree sets the intervals for later external and internal inspections and pressure tests. Paul supplies the design documentation, calculations, material certificates, test records and drawings each of those steps asks for.

Slovak-language documents and machinery rules

Regulation 1/2016 requires instructions and safety information in Slovak and has the EU declaration of conformity drawn up in Slovak, while conformity assessment records follow the language agreed with the notified body. Machinery and assemblies with moving parts fall under Government Regulation 436/2008 Z.z., amended by Regulation 96/2026, until the EU Machinery Regulation 2023/1230 applies from 20 January 2027. Paul delivers operating manuals, nameplates, warning labels and the declaration of conformity in Slovak, with English versions for engineering review.

Requirements for a US-built system in Slovakia and the records Paul Industries delivers
RequirementLegal basisWhat Paul Industries delivers
Placing pressure equipment on the marketPED 2014/68/EU, Government Regulation 1/2016 Z.z.Category assessment, conformity records, CE marking, Slovak declaration of conformity
Putting group A and B equipment into operationAct 124/2006 Z.z., Decree 508/2009 Z.z.Design documentation for the expert opinion, test records, inspection access
Machinery and skidsRegulation 436/2008 Z.z., then Regulation (EU) 2023/1230 from 20 January 2027Risk assessment, technical file, Slovak instructions
Electrical equipment and wiringLow Voltage and EMC directives, STN 33 2000EN 60204-1 panels, single-line diagrams, test reports
GMP utilitiesEU GMP, Annex 1, Annex 15, PIC/SDesign, installation and operational qualification protocols and reports

Slovakia voltage, frequency and the 22 kV distribution networks

Slovakia voltage for industrial equipment is 400 V between phases and 230 V phase to neutral, at a frequency of 50 Hz, and that is the supply every motor, drive, heater and control panel on a Slovak skid is designed for. Voltage in Slovakia differs from US practice of 480 V or 208 V at 60 Hz, so a centrifugal pump runs about 17 percent slower on the Slovak grid and Paul selects impellers, fans and gearing for the 50 Hz speed rather than relying on a drive to make up the difference.

The Slovakia power grid is run by SEPS at 400 and 220 kV for transmission, with three regional distribution operators below it: Západoslovenská distribučná in the west, Stredoslovenská distribučná in the center and Východoslovenská distribučná in the east. Most factories take supply from 22 kV networks through 22/0.4 kV transformer stations, and very large sites connect at 110 kV. Low-voltage installations follow the STN 33 2000 series, the Slovak adoption of HD 60364. Slovakia power voltage and frequency also set component choices on a US-built skid: IEC motors and contactors carrying CE marking, 230 V control circuits and panels to EN 60204-1. Slovakia electricity voltage is the same at a Bratislava plant as in Košice, so one electrical design serves sites anywhere in the country.

Shipping to Slovakia from US East Coast ports

Shipping to Slovakia from the United States always combines an ocean leg to a seaport with a rail, road or river leg inland, because Slovakia has no coast. Most container freight lands at Hamburg or Bremerhaven, which forwarder data puts at about 9 to 14 days from New York on direct sailings, or at Koper on the Adriatic, at about 20 to 25 days. Container trains then run from all three ports to the Metrans hub at Dunajská Streda near Bratislava, with a further terminal at Košice for the east, and a Koper to Bratislava train has been timed at about 23 hours.

International shipping to Slovakia also has a river option for heavy pieces: the Port of Bratislava sits on the Rhine, Main and Danube waterway, so an oversized vessel or column shipped to Rotterdam continues by barge without the bridge and permit limits of a long road move. Module size is planned from the start: the inside of a 40-foot high cube container measures about 12.0 by 2.35 by 2.69 meters, and Paul lays out skids to fit those dimensions whenever the process allows, with flat racks for anything wider. Every crate uses ISPM 15 heat-treated wood, centers of gravity and lifting points are marked, and terms follow Incoterms 2020, commonly FCA at the US port, CIP to the rail terminal or DAP at the plant gate.

VAT in Slovakia, customs and the euro

VAT in Slovakia rose to a standard rate of 23 percent on 1 January 2025, up from 20 percent, with reduced rates of 19 and 5 percent. The VAT rate in Slovakia for industrial equipment is the standard 23 percent, charged on the customs value plus duty when the goods enter free circulation. The VAT in Slovakia 2026 changes moved selected foods and drinks from 19 to 23 percent and capped VAT deduction on mixed-use cars, and none of that changes the rate on plant equipment. After the VAT increase Slovakia applied in 2025, the Slovakia VAT tax rate on a skid is 23 percent, recoverable through the returns of a VAT-registered plant. Slovakia has used the euro since 1 January 2009, imports clear under the EU Common Customs Tariff by heading, and the importer needs an EORI number. Paul classifies every item on the invoice and packing list so the customs declaration goes through cleanly.

How a project for a Slovak plant runs with Paul Industries

A project for a Slovak plant runs through nine stages with Paul Industries, and the first two settle the PED categories, the Decree 508/2009 group of each vessel, the 50 Hz equipment selection and the document language. The table shows each stage and what the plant receives.

Stages of a process equipment project for a plant in Slovakia
StageWork by Paul IndustriesWhat the Slovak plant receives
1. Basis of designUser requirements, PED categories, Decree 508/2009 groups, 400 V, 50 Hz supplyAgreed code basis and equipment list
2. EngineeringVessel design to EN 13445 or ASME VIII under the PED, hygienic design to ASME BPE, panels to EN 60204-1Drawings and calculations released for fabrication
3. FabricationWelding, examination, passivation and panel build in the United StatesMaterial certificates, weld maps, inspection reports
4. Factory acceptance testHydrostatic and functional tests, witnessed in person or by videoSigned FAT report and punch list
5. Conformity fileTechnical file, declaration of conformity, Slovak instructionsComplete conformity package
6. ExportCrating, sailing to Hamburg, Bremerhaven or Koper, rail or barge inlandInvoice, packing list, bill of lading
7. InstallationSetting, hook-up and wiring by Paul or under Paul’s supervisionInstallation records and redlined drawings
8. Start-up and qualificationCommissioning, documents for the official test, IQ, OQ and PQExecuted protocols and test reports
9. Handover and serviceTraining, spare parts, inspection and maintenance planSlovak and English manuals, as-built file

After handover Paul services what it supplied with planned maintenance, spare parts, repairs and requalification, and keeps the equipment file in step with the inspection intervals the decree sets. Its validation and commissioning service covers the qualification work for GMP plants.

Who builds process systems for plants in Slovakia?

Paul Industries builds process systems for plants in Slovakia: deionized water, process cooling, compressed air and wastewater systems for car and battery plants in Bratislava, Trnava, Nitra, Žilina and Košice, pressure vessels, exchangers and piping for the refinery and chemical sites, and purified water, WFI, clean steam and vessels for pharmaceutical plants in Hlohovec and central Slovakia. Each Slovak system leaves the United States wired for the 50 Hz grid, carries its PED and Slovak documents with Slovak instructions, and goes into service with Paul installing it or directing the installation, all on one contract and in one equipment file. The Czech Republic page covers the neighboring market that shares Slovakia’s rail routes from Hamburg.

What makes up the delivered cost of equipment for a Slovak plant?

The delivered cost of equipment for a Slovak plant comes down to five items beyond the equipment itself, and each one appears as its own US dollar line in a Paul proposal so the owner compares like with like.

  • 50 Hz and EU component engineering. IEC motors, 400 V drives, CE-marked switchgear and EN 60204-1 panels change a US design and add engineering hours.
  • Conformity and Slovak documents. PED category work, documentation for the Decree 508/2009 expert opinion and official test, and Slovak translations are priced as defined deliverables.
  • Freight and the inland leg. Ocean freight to Hamburg, Bremerhaven or Koper, the rail leg to Dunajská Streda or Košice, and barge or escorted road moves for oversized pieces.
  • Customs and VAT. EU duty by tariff heading, then VAT at 23 percent on the duty-paid value, recoverable by a VAT-registered plant.
  • Site route. Full installation by Paul, or Paul’s supervision of the installation, priced per the route the owner chooses.

Two further items often move the number. The Decree 508/2009 group of each vessel decides whether an expert opinion and official test are needed, and a plant that groups several small receivers into one larger vessel changes that workload. The choice between a single large skid and several container-sized modules trades extra field connections against cheaper freight and easier rigging inside an existing building.

A budget range follows from the equipment list, process data and site location, and a firm price follows once the design basis and delivery terms are agreed.

Paul Industries for automotive, refining and pharmaceutical plants in Slovakia

Paul Industries designs, fabricates, tests, ships, installs and commissions process systems for Slovak plants from Bratislava to Košice, and services them after start-up. Send the process data, site location, supply voltage and target date to request a quote, and Paul returns a proposal in US dollars with the shipping route, code basis and schedule. Readers comparing neighboring markets will also find the Austria page useful for Danube shipments.

Standards referenced: Pressure Equipment Directive 2014/68/EU · Government Regulation 1/2016 Z.z. · Act 124/2006 Z.z. on occupational safety · Decree 508/2009 Z.z. on technical equipment · Government Regulation 436/2008 Z.z. and Machinery Directive 2006/42/EC · Machinery Regulation (EU) 2023/1230 · Low Voltage Directive 2014/35/EU · EMC Directive 2014/30/EU · STN 33 2000 (HD 60364) · EN 60204-1 · EN 13445 · ASME Boiler and Pressure Vessel Code Section VIII · ASME BPE · EU GMP and Annex 1 · PIC/S GMP Guide · Incoterms 2020 · ISPM 15

Frequently asked questions

What is the VAT rate in Slovakia on a skid imported from the United States?

A skid imported into Slovakia carries VAT at the standard rate of 23 percent, in force since 1 January 2025, charged on the customs value plus EU duty when it is released for free circulation. VAT-registered plants recover it through their Slovak VAT returns. Paul Industries lists each item by tariff heading, weight and value so the importer’s customs declaration and VAT entry match the shipment.

Which car manufacturers in Slovakia run plants that buy process utilities?

Volkswagen in Bratislava, Kia at Teplička nad Váhom near Žilina, Stellantis in Trnava and JLR in Nitra build cars in series, and Volvo is preparing series production near Košice for 2027. Plants of this kind buy paint shop pretreatment water, chilled water, compressed air and wastewater systems, and Paul Industries designs and builds those systems for 400 V, 50 Hz supply.

Who builds wastewater treatment systems for car plants around Trnava and Nitra?

Paul Industries designs and fabricates wastewater pretreatment and effluent systems for car plants around Trnava and Nitra, covering equalization tanks, oil and water separation, pH adjustment, metals removal for paint shop rinses, sludge handling and controls. Each system ships as tested skids with Slovak instructions and installs on site under Paul or Paul’s supervision.

What does Decree 508/2009 require before a new pressure vessel starts operating in Slovakia?

Decree 508/2009 places most process vessels in group A or B. Group A vessels need an expert opinion on the design documentation and an official test by an authorized legal entity, and both groups need an expert inspection and test before first operation. Paul Industries supplies the drawings, calculations, material certificates and test records those steps call for.

Do pressure equipment instructions for a Slovak plant have to be in Slovak?

Government Regulation 1/2016, which applies the Pressure Equipment Directive in Slovakia, requires instructions and safety information in Slovak and has the EU declaration of conformity drawn up in Slovak. Paul Industries delivers manuals, labels and the declaration in Slovak, with matching English versions for the plant’s engineers.

Which supply voltage should a skid for a Slovak factory be built for?

A skid for a Slovak factory is built for 400/230 V at 50 Hz, the supply from the ZSD, SSD and VSD networks, with larger sites stepping down from 22 kV. Paul Industries selects IEC motors and drives, sizes pumps and fans for 50 Hz speed and builds panels to EN 60204-1.

How does a vessel from New York reach a plant near Bratislava?

A vessel from New York usually sails to Hamburg or Bremerhaven in about 9 to 14 days and continues by container train to the Dunajská Streda terminal near Bratislava, then by truck to the plant. Oversized pieces go to Rotterdam and up the Danube by barge to the Port of Bratislava. Paul Industries plans the route against the plant’s installation date.

Is Koper a good port for equipment bound for eastern Slovakia?

Koper on the Adriatic is about 20 to 25 days from New York and has direct container trains into Slovakia, including services to Dunajská Streda, with a Metrans terminal at Košice serving the east. Paul Industries compares the Koper routing with Hamburg for each shipment by sailing dates, rail slots and the module sizes involved.

Who supplies purified water systems to pharmaceutical plants in Hlohovec?

Paul Industries designs, fabricates and qualifies purified water and WFI generation, storage and distribution systems for pharmaceutical plants in Hlohovec and elsewhere in western Slovakia, built to the European Pharmacopoeia, EU GMP and ASME BPE. Systems arrive with Slovak documents and executed factory tests, and Paul installs and qualifies them on site.

How does ŠÚKL review equipment qualification records from a US supplier?

ŠÚKL inspects Slovak manufacturers against EU GMP and the PIC/S guide and looks at whether the plant’s qualification evidence is complete, traceable and controlled, regardless of where it was prepared. Protocols from Paul Industries for design, installation and operational qualification follow the Slovak plant’s own templates and come with signed records for every component, weld and instrument.

What process systems does a battery cell plant in Slovakia need?

A battery cell plant such as the one under construction at Šurany needs dry room air handling backed by large chilled water plants, deionized and ultrapure water, solvent recovery and handling, compressed air, and process wastewater treatment. Paul Industries builds the water, cooling and piping systems as tested skids documented for EU product rules.

Which equipment does a refinery like Slovnaft buy for a turnaround?

A refinery of Slovnaft’s size buys replacement pressure vessels, heat exchanger bundles, pump skids, alloy piping spools and relief valve assemblies ahead of planned turnarounds. Paul Industries fabricates that equipment to the PED and EN 13445 or ASME Section VIII, with material traceability and weld records, and times delivery to the shutdown window.

Can Slovak engineers attend testing at the US fabrication site?

Engineers from Slovak plants attend Paul Industries factory acceptance tests in the United States or follow them by live video, covering hydrostatic tests, functional runs, alarm checks and a document review. The signed report and punch list go into the conformity and qualification file before the equipment ships.

Does a skid for a Slovak plant fall under the EU Machinery Regulation from 2027?

Yes for any skid with moving parts placed on the Slovak market on or after 20 January 2027: Regulation (EU) 2023/1230 then replaces the Machinery Directive and Slovakia’s Regulation 436/2008. Paul Industries prepares the risk assessment, technical file and instructions under whichever rule applies on the date the skid is placed on the market.

Which dairy and brewery systems does Paul Industries supply to Slovak food plants?

For Slovak dairies in Bratislava and Kežmarok and breweries such as Hurbanovo, Paul Industries supplies sanitary tanks, CIP skids, pasteurizer and holding tube packages, glycol and ammonia cooling, and wastewater pretreatment, built with hygienic welds and drainable layouts and wired for 400 V at 50 Hz.

In which currency are Slovak projects priced?

Paul Industries prices Slovak projects in US dollars, with equipment, engineering, documents, freight, installation and service shown as separate lines. The plant pays its EU duty and VAT in euros at import, and the Incoterm chosen in the contract decides which party arranges each leg of the shipment.

How much should a Slovak plant budget for freight on a large skid?

Freight on a large skid depends on whether it fits a 40-foot high cube container, about 12.0 by 2.35 by 2.69 meters inside, or needs a flat rack, and on the inland leg by rail, barge or escorted road move. Paul Industries prices freight as its own line once the module sizes and delivery terms are set.

What should a Slovak plant send to receive a price?

A Slovak plant should send its process description or flow diagram, flow rates and design conditions, product contact and code requirements, site location and supply voltage, preferred Incoterm and target start-up date. Paul Industries returns a budget range from that package and a firm US dollar price once the design basis is agreed.

Planning a process system for a plant in Slovakia?

Send Paul Industries your process data, plant location, supply voltage and the date the system has to run, and the reply sets out the code basis, the shipping route and a US dollar budget for the work. Call 201-450-8280 or request a quote.