Paul Industries engineers, skid-builds and installs ultrapure water systems in Arizona: pretreatment, double-pass reverse osmosis, electrodeionization, degassing, UV and polishing trains, reclaim systems and SEMI F57 distribution loops for semiconductor fabs, packaging plants, laboratories and power users in Phoenix, Chandler, Tempe, Peoria and Tucson. Arizona’s chip build-out has made ultrapure water a utility on the scale of power, while the Valley’s feedwater shifts with river supplies and drought stages. Paul Industries designs the plant for that feed, builds and starts it up, and keeps it at specification.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Chip build-out TSMC's first Phoenix fab producing; second fab 3 nm volume targeted for late 2027
Phoenix feedwater About 60% Salt and Verde, 40% Colorado River, 2% groundwater
Discharge permits Class A permits for categorical users and 25,000 gal/day process flows (Phoenix)
Industrial power, 2025 8.05 cents/kWh (EIA)
Reviewed November 2026

Ultrapure water systems in Arizona: who needs them and at what purity

Ultrapure water systems in Arizona serve users who need water with almost nothing left in it: semiconductor fabs and advanced packaging plants that rinse wafers and substrates between process steps, research and university laboratories, analytical labs, and power and energy users that need high-purity makeup. At the top of that range, water approaches 18.2 megohm-centimeters, the theoretical resistivity limit of pure water at 25 C, while organic carbon, particles, dissolved gases, silica, metals and bacteria held to trace levels.

The national ultrapure water systems page explains the technology for any site. Pharmaceutical purified water and water for injection are a different specification with their own validation, covered on high-purity water systems in Arizona. This page is about semiconductor-grade water in Arizona: who is building, what the Valley’s feedwater does to a treatment train, how reclaim and discharge permits work in Phoenix, and how plants are expanded while they run.

What is ultrapure water used for in Arizona plants?

What is ultrapure water used for in Arizona? Most of it is used to rinse wafers between wet process steps in semiconductor fabs, where any ion, particle or organic left on the surface can become a defect. Smaller volumes feed wet benches and chemical dilution, advanced packaging and test lines, laboratory analyzers and research tools, and high-purity makeup for boilers and other energy equipment.

Ultrapure and high-purity water users in Arizona and their reference standards
UserTypical useReferenceWhat drives the design
Wafer fabsWafer rinse, wet benches, chemical dilutionSEMI F63 guide; ASTM D5127 electronics grades; SEMI F57 distribution componentsTrace organics, particles, dissolved oxygen, silica and metals at the point of use
Advanced packaging and testRinse and cleaning of substrates and assembliesCustomer and ASTM D5127 gradesVolume, rinse quality and reclaim of lightly used water
Research and university labsAnalytical work, cell culture, materials researchASTM D1193 reagent water typesPoint-of-use polishing on a central loop or at the bench
Power and energy usersHigh-purity makeup for boilers and process equipmentEquipment maker’s water specificationSilica and sodium limits, high reliability
Pharmaceutical plantsPurified water and water for injectionUSP monographs (a separate specification)Validation and microbial control rather than resistivity alone

The semiconductor build-out behind semiconductor water in Arizona

Demand for semiconductor water in Arizona is driven by fabs and packaging plants in the Phoenix area. TSMC’s first fab in north Phoenix has been producing 4-nanometer chips since 2025, and the company announced in January 2026 that 3-nanometer volume production at its second fab would start in the second half of 2027, with plans for a cluster of at least ten fabs, two advanced packaging facilities and a research center. Intel operates its Ocotillo campus in Chandler, home to Fabs 12 and 22, and Amkor’s planned $2 billion advanced packaging plant is sited at the Peoria Innovation Core. These are named only as public market facts that show the scale of demand.

A fab campus of that kind buys ultrapure water capacity in large, phased steps, and the suppliers around it, chemical, gas and component plants, need their own high-purity water in smaller systems. Paul Industries builds plants and loops across that range, from a laboratory polishing loop to a multi-train production system, and the cleanroom and piping work that surrounds them is covered on cleanrooms in Arizona and process piping in Arizona.

Valley feedwater: a blend that changes with the rivers

Valley feedwater changes through the year because the cities that supply Arizona plants draw from several sources and blend them. In Phoenix the split is roughly three parts Salt and Verde River water delivered by SRP to two parts Colorado River water delivered by CAP, topped up with a sliver of groundwater, and neighboring cities run their own mixes and wells. As river conditions, treatment plant operations and drought stages shift, the share of each source at a given plant’s meter shifts with them.

A treatment train designed for one water analysis can run into trouble when the blend moves. Hardness, alkalinity, silica, sulfate and total dissolved solids decide how hard the reverse osmosis can be pushed before scale forms, and organics and disinfectant residual decide what the pretreatment must remove first. Paul Industries designs the front end of an Arizona plant from several seasons of feed analysis rather than one sample, sizes softening or antiscalant dosing for the worst expected case, and sets the RO recovery so the plant stays within its scaling limits across the year. With Phoenix’s drought plan stepping up from its 2022 water alert to a second stage this January, a stable, efficient recovery is worth more each year.

How is ultra pure water produced from Valley feedwater?

Ultra pure water is produced in an Arizona plant by passing municipal or well water through a series of stages that each remove a class of contaminant: pretreatment for particles and chlorine or chloramine, softening or antiscalant conditioning, two passes of reverse osmosis, electrodeionization, membrane degassing, ultraviolet treatment for organic carbon, ion exchange polishing and final ultrafiltration, with a recirculating loop delivering the water to the points of use.

A typical ultrapure water train and its Arizona design points
StageRemoves or controlsArizona design point
Multimedia or ultrafiltration pretreatmentSuspended solids, colloids, turbiditySized for the dirtiest seasonal feed and for storm-related turbidity
DechlorinationChlorine or chloramine residualMatched to the disinfectant the serving city uses
Softening or antiscalantScaling ions ahead of the membranesDosed for the worst blend of hardness and silica
Double-pass reverse osmosisMost dissolved salts, organics, silicaRecovery limited by silica and hardness; feed temperature controlled
ElectrodeionizationRemaining ionsSteady feed quality from the RO protects the stack
Membrane degassingDissolved oxygen and carbon dioxideTargets set by the fab’s point-of-use specification
UV 185 nm, polishing and final ultrafiltrationTotal organic carbon, trace ions, particlesLoop materials and components to SEMI F57

The details depend on the user. A university lab loop may stop at single-pass RO and polishing cartridges, while an advanced-node fab adds extra stages and continuous online monitoring of resistivity, total organic carbon, particles, dissolved oxygen and silica. Paul Industries sizes each stage from the point-of-use specification back to the feed, so nothing is overbuilt and nothing runs at its limit.

Reclaim and reuse inside an Arizona fab

Reclaim inside an Arizona fab returns lightly used rinse water to the system instead of the sewer, and in a Valley preparing for Stage 2 drought measures it is part of how a large user keeps its water commitment. Rinse streams are segregated at the tool by quality: the cleanest final rinses can return to the ultrapure feed after treatment, intermediate streams can serve cooling tower makeup or scrubbers, and concentrated or chemically contaminated streams go to waste treatment.

Segregation is the hard part, because one contaminated stream can spoil a reclaim tank. Paul Industries designs the collection piping, online conductivity and organic carbon monitors that divert off-quality water automatically, reclaim treatment trains, and the controls that keep reclaimed water from ever reaching the ultrapure loop out of specification. The reject from the ultrapure plant’s own RO is handled as a separate stream with its own reuse options.

Reclaim changes the numbers a fab reports to its city. Every gallon of rinse water returned to the feed is a gallon the site does not buy and a gallon it does not discharge, so reclaim reduces both the water bill and the process flow counted under the discharge permit. Paul Industries meters each reclaim stream, the diverted volume and the makeup separately, so the owner can show the water provider and the pretreatment program exactly how much is recovered, and can see at once when a tool change or a fouled sensor starts sending good water to drain.

Discharge permits for fab and RO wastewater in Phoenix

Discharge permits for fab and RO wastewater in Phoenix come from the city’s Industrial Pretreatment Program, which issues Class A industrial wastewater discharge permits to significant industrial users that run federally regulated processes subject to categorical pretreatment standards, and to companies discharging an average of 25,000 gallons per day of process wastewater to city sewers. Semiconductor manufacturing falls under EPA’s Electrical and Electronic Components effluent guidelines, so a fab in Phoenix is a categorical user from the start.

The program also reviews construction drawings for industrial facilities before they go to the city’s Planning and Development Department, under the requirements of City Code Chapter 28. That puts wastewater segregation, sampling points, neutralization and metering into the design schedule early. Paul Industries designs the ultrapure plant’s drain, reject and regeneration streams with sampling and metering that fit the permit, and coordinates the wastewater side with process wastewater and effluent systems. Sites in other Arizona cities follow that city’s pretreatment program in the same way.

Heat, distribution loops and temperature control

Heat reaches an Arizona ultrapure water system from three directions: warm summer feedwater, hot equipment rooms and long distribution runs through buildings in a city that averages 111 days a year at 100 degrees or more. Reverse osmosis output and salt passage change with water temperature, UV lamps and pumps add heat to a recirculating loop, and many fab tools need water within a narrow temperature band at the point of use.

Paul Industries controls temperature with heat exchangers ahead of the RO to hold a steady feed temperature, loop heat exchangers to remove pump and UV heat, and insulation on runs through hot spaces; the chilled water those exchangers rely on is kept in service under chiller repair in Arizona. Each distribution loop uses wetted parts specified to SEMI F57, high-purity polymer piping such as PVDF where the specification calls for it, welded or fused joints, and velocities and return designs that keep water moving at every point of use. The loop is cleaned, flushed and rinsed up to specification before it is released.

Silica, the RO recovery limit and the point-of-use specification

Silica sets the practical limit on reverse osmosis recovery at many Arizona sites, because dissolved silica concentrates in the reject stream as recovery rises, and once it passes its solubility it forms a glassy scale on the membranes that ordinary cleaning struggles to remove. Hardness and sulfate scale are easier to control with softening and antiscalant; silica responds to temperature, pH and a carefully chosen antiscalant, and in some feeds to dedicated removal ahead of the membranes.

Silica also matters at the far end of the plant. Fab specifications hold both reactive and total silica to very low levels at the point of use, and the stages that remove the last traces, EDI and polishing resins, lose capacity quickly if the RO lets more through. Paul Industries models silica across the seasonal feed range, sets RO recovery and antiscalant dosing to stay clear of the scaling limit in the worst month, and places silica analyzers where they show early whether the downstream stages are being overloaded. That approach keeps membranes clean, resin life predictable and product water inside specification through every change in the Valley’s water blend.

Startup and rinse-up of a new Arizona UPW plant

Startup of a new ultrapure water plant follows a fixed order: clean and flush every pipe and vessel, sanitize the system, load membranes and resins, calibrate the instruments, then rinse the plant and loop until the product water reaches specification at every point of use. Paul Industries records the readings at each stage, so the owner sees how the plant reached specification as well as the final result, and trains the operators on the trains, the controls and the restart procedure before handover.

Storage tanks, vents and dust in a desert plant

Storage tanks on an Arizona ultrapure water system need protection from the air around them, because every time a tank draws down it breathes in room or outdoor air, and Valley air during the monsoon carries fine dust, while summer air carries heat. Ultrapure water also absorbs carbon dioxide from the air, which lowers its resistivity before it ever reaches the loop.

Paul Industries specifies sealed tanks, built as described under tank fabrication in Arizona, with hydrophobic vent filters, or nitrogen blanketing where the fab specification calls for low dissolved gases, so tank breathing adds neither particles nor carbon dioxide. Tanks and skids sit indoors in a ventilated plant room rather than in an outdoor yard, and plant room air intakes are filtered for the dust load of a monsoon storm. Level control keeps the tank turning over so water never sits long enough to warm or to support bacterial growth, and spray balls or full-wetting returns keep the upper shell clean.

Power events, loop recirculation and restart

Loop recirculation has to continue through power events, because an ultrapure loop that stops flowing lets particles settle, bacteria attach and temperature drift, and restarting it can release a burst of contamination to the tools. The monsoon brings lightning, downbursts and utility interruptions to the Valley every summer, so an Arizona plant plans for them as a routine condition.

Paul Industries puts the distribution pumps and critical instruments on backup power, designs the loop so that it keeps flowing while the plant’s generators start, and writes a restart procedure that flushes to drain and confirms resistivity, organic carbon and particle counts before water returns to the points of use. The generation trains themselves can stop and restart with less risk once the loop and storage are protected, and their restart sequence is tested during commissioning with the owner’s team watching.

Pure Water Phoenix and the feed of the future

Pure Water Phoenix is the city’s advanced water purification program, and it will add purified recycled water to the Phoenix supply. The first facility is under construction as part of the Cave Creek Water Reclamation Plant rehabilitation, and the city has named further facilities planned at North Gateway and 91st Avenue. For an ultrapure water user, that means the feed blend may include a new source within the life of a plant being designed today.

A plant designed with headroom in its pretreatment and monitoring adapts to a new source more easily than one built tightly around a single analysis. Paul Industries leaves space and connections for added pretreatment, specifies online monitoring on the feed as well as the product, and documents the design basis so a future source change is a review rather than a redesign.

Expanding an ultra pure water facility while it runs

Expanding an ultra pure water facility in Arizona usually happens while the fab or lab keeps producing, so new trains, tanks and loop sections are built alongside the running plant and connected in planned windows. Each new section is cleaned, sanitized and rinsed until resistivity, organic carbon and particle counts match the running loop, then tied in through valves installed during an earlier shutdown.

Monitoring and qualification points on an Arizona ultrapure water system
ParameterWhere it is measuredWhy it matters in Arizona
Feed hardness, silica and TDSIncoming water and RO feedBlend shifts move the scaling limit through the year
ResistivityAfter EDI, after polishing, loop returnPrimary measure of ionic purity
Total organic carbonRO product, after UV, loopOrganics in surface water vary with the season
ParticlesAfter final filtration, at points of useNew loop sections and tie-ins are the usual source
Dissolved oxygenAfter degassing, at points of useSet by process steps sensitive to oxidation
TemperatureRO feed, loop supply, points of useSummer heat moves RO performance and tool temperature
BacteriaLoop samples on a scheduleWarm water and dead legs encourage growth

Qualification of new work follows the plant’s own procedures and is documented for the owner’s records; regulated pharmaceutical systems follow the protocols described on validation and commissioning in Arizona.

How much does an ultrapure water system cost in Arizona?

The cost of an ultrapure water system in Arizona is driven by product flow and purity, the number of stages, redundancy, feedwater quality and its seasonal range, reclaim scope, loop length and materials, the monitoring package and the work needed to connect to a running plant. Operating cost adds power, membranes and resins, chemicals and water and sewer charges, and Phoenix’s drought stages put more weight on recovery and reclaim.

Power is a steady line. A plant drawing 150 kilowatts around the clock consumes about 1,314,000 kilowatt-hours a year, close to $106,000 when priced at the 8.05 cent industrial average EIA reported for Arizona in 2025. Paul Industries puts a budget range on the project as soon as flow, purity and the feed analysis are in hand, then fixes the price when the design is done. Supply-only skids, design-build plants and complete installations are all available.

Who designs and builds ultrapure water systems in Arizona?

Paul Industries designs and builds ultrapure water systems in Arizona for fabs, packaging plants, suppliers, laboratories and energy users in Phoenix, Chandler, Tempe, Mesa, Peoria, Goodyear, Casa Grande and Tucson. Its home office is 256 Shore Drive, Kilmarnock, Virginia. Formerly based in northern New Jersey, then Pennsylvania, this East Coast contractor accepts projects throughout Arizona and the other states, as well as abroad. Owners choose supply-only skids, design-build from a point-of-use specification, or complete installation through startup and service.

For a contrast with other states, river and reservoir feeds at the headquarters state appear under ultrapure water systems in Virginia, and salty North Texas feed on ultrapure water systems in Texas. The wider semiconductor scope is on semiconductor, and the other desert states on the Southwest page.

Arizona ultrapure water from Paul Industries

Across Arizona, Paul Industries engineers, builds, commissions and services ultrapure water plants, with pretreatment sized for the Valley’s changing feed, RO recovery set for the worst blend, reclaim built to protect the loop, discharge streams designed for the city’s permit, and SEMI F57 distribution delivered clean. Send the point-of-use specification, flows, a feed water analysis from more than one season and the site’s water and sewer provider. Call 201-450-8280 or request a quote; the Arizona overview shows how this work connects with purified water, cleanroom and piping projects.

Standards referenced: SEMI F63 · SEMI F57 · ASTM D5127 · ASTM D1193 · EPA Electrical and Electronic Components effluent guidelines (40 CFR Part 469) · City of Phoenix City Code Chapter 28 (industrial wastewater) · ASME BPE

Frequently asked questions

Which contractor puts in UPW plants for Chandler and Tempe fabs?

Paul Industries puts in ultrapure water plants for fabs, packaging plants and suppliers in Chandler, Tempe, Mesa and Gilbert, from pretreatment and double-pass RO through EDI, polishing and SEMI F57 distribution loops. East Valley plants draw on city supplies with their own source mixes, so Paul Industries designs the front end from seasonal feed analyses and builds the plant to the fab’s point-of-use specification.

Does Paul Industries install ultrapure water in north Phoenix and Peoria?

Yes. Paul Industries installs ultrapure water plants, reclaim systems and distribution loops in north Phoenix, Peoria, Glendale and Goodyear for semiconductor, packaging and supplier plants. Sites inside Phoenix work under the city’s Industrial Pretreatment Program for discharge permits, so wastewater segregation and sampling are designed in from the start. Paul Industries delivers supply-only, design-build or complete installation.

Who provides ultrapure water systems in Tucson?

Paul Industries provides ultrapure water systems in Tucson and southern Arizona for university and research laboratories, manufacturing plants and energy users. Systems range from lab polishing loops to production plants with RO, EDI and UV. Paul Industries designs each to the feed water the site receives and to the purity its users need.

What is an ultra pure water facility in a fab?

It is the plant room, often a building of its own, where municipal water is turned into ultrapure water and sent out to the fab through a recirculating loop. It holds pretreatment, RO, EDI, degassing, UV and polishing trains, storage, monitoring instruments and pumps, plus reclaim systems that return used rinse water. Paul Industries designs, builds and expands these facilities while the fab keeps running.

Why does Phoenix feedwater change through the year?

Phoenix blends water from the Salt and Verde Rivers, the Colorado River and a small share of groundwater, and the share of each at a given meter changes with river conditions, treatment plant operations and drought stages. Hardness, silica, dissolved solids and organics move with the blend. Paul Industries designs pretreatment and RO recovery from several seasons of analysis so the plant stays within its scaling limits all year.

Is a semiconductor fab in Phoenix a categorical industrial user?

Yes. Semiconductor manufacturing is covered by EPA’s Electrical and Electronic Components effluent guidelines, and Phoenix issues Class A industrial wastewater discharge permits to significant industrial users that run federally regulated processes subject to categorical pretreatment standards. The city’s Industrial Pretreatment Program also reviews industrial construction drawings before they go to Planning and Development, so permit needs enter the design early.

What discharge volume triggers a Phoenix industrial wastewater permit?

Phoenix issues Class A permits to companies discharging an average of 25,000 gallons per day of process wastewater to city sewers, as well as to categorical users and to companies whose effluent could affect the treatment plants. An ultrapure water plant’s RO reject, regeneration and drain streams count toward the site’s process flows, so Paul Industries meters and samples them in a way the permit can use.

Can fab rinse water be reclaimed in an Arizona ultrapure system?

Yes. The cleanest final rinses are collected separately, monitored online for conductivity and organic carbon, treated and returned to the ultrapure feed, while lower-quality streams serve cooling tower makeup or scrubbers. Automatic diversion keeps off-quality water out of the reclaim tank. With Phoenix moving toward Stage 2 of its drought plan, reclaim is a major lever a fab has on its water use.

Why does summer in the Valley matter to a UPW plant's temperature control?

Warm summer feedwater changes RO output and salt passage, UV lamps and pumps add heat to the loop, and long runs through hot spaces gain more. Many tools need water in a narrow temperature band. Paul Industries uses heat exchangers to hold a steady RO feed temperature, loop exchangers to remove pump and UV heat, and insulation on exposed runs.

Which components does SEMI F57 cover in an Arizona loop?

SEMI F57 sets requirements for polymer materials and components used in ultrapure water distribution, such as piping, fittings, valves and other wetted parts, so they release as little as possible into the water. Fab specifications commonly call for it on the loop. Paul Industries builds loops with compliant components, controlled joining methods and documented cleaning before release.

Will Pure Water Phoenix change the feed to Arizona ultrapure plants?

It may over the life of a plant. Phoenix is building its first advanced water purification facility at the Cave Creek Water Reclamation Plant and has named further facilities planned at North Gateway and 91st Avenue, which will add purified recycled water to the supply. Paul Industries leaves room for added pretreatment and monitors the feed online, so a new source becomes a design review rather than a rebuild.

What proves a new UPW branch is clean enough to open to a live Arizona loop?

The section is built with clean components, flushed, sanitized and rinsed until its resistivity, organic carbon and particle counts match the running loop, then connected through valves installed during an earlier planned shutdown. Results are recorded for the owner’s procedures. Paul Industries plans the tie-in with the fab so production continues throughout.

What does an ultrapure water system cost to run in Arizona?

Operating cost covers power, membrane and resin replacement, chemicals, and water and sewer charges. As an illustration, a plant drawing 150 kilowatts continuously uses about 1,314,000 kilowatt-hours a year, roughly $106,000 at Arizona’s 2025 average industrial price of 8.05 cents (EIA). Higher RO recovery and rinse reclaim cut water and sewer costs, which carry more weight as Phoenix moves through its drought stages.

Can an existing high-purity system be upgraded to semiconductor grade?

Often, by adding stages: a second RO pass, EDI, membrane degassing, 185 nanometer UV for organic carbon, polishing ion exchange and final ultrafiltration, along with a loop rebuilt from SEMI F57 components. The existing pretreatment is checked against the Valley’s seasonal feed range. Paul Industries surveys the plant and proposes the additions needed to reach the new point-of-use specification.

Who keeps an Arizona UPW plant at specification year after year?

Paul Industries keeps Arizona ultrapure plants at specification under service contracts covering membrane cleaning and replacement, EDI and resin service, UV lamp changes, instrument calibration, loop sanitization and the records owners keep for their quality systems. Service visits also review feed analyses, so pretreatment settings follow changes in the Valley’s water blend.

How are UPW storage tanks protected from Arizona dust?

Tanks are sealed and breathe only through hydrophobic vent filters, or they are blanketed with nitrogen where the specification calls for low dissolved gases, which also keeps carbon dioxide from lowering resistivity. Tanks and skids sit in a ventilated plant room with intake filters sized for monsoon dust storms. Paul Industries designs the vents, blanketing and room ventilation together.

What should an Arizona site send to scope an ultrapure water project?

Send the point-of-use purity specification, peak and average flows, a feed water analysis from more than one season, the water and sewer provider, any reclaim goals, available space and the target schedule. Paul Industries returns a process concept, an estimate of water and power use and a budget range.

Planning ultrapure water for an Arizona fab, lab or plant?

Send the point-of-use specification, flows, a multi-season feed water analysis and the water and sewer provider. Call 201-450-8280 or request a quote.