Paul Industries provides boiler repair in Kentucky for power and heating boilers at manufacturing plants, chemical sites, distilleries, hospitals and campuses, working to the repair permit and state inspection rules of KRS Chapter 236. Kentucky treats most boiler repairs as permitted work with a state hold point, so the repair plan has to account for the Boiler Inspection Section as well as the tubes, refractory and controls. Paul Industries diagnoses, repairs, retubes, rebuilds, tests and returns boilers to service, and supplies and installs replacements when repair stops making sense.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
State program Boiler Inspection Section, Kentucky Department of Housing, Buildings and Construction
Power boilers Certificate inspection every year (KRS 236.110)
Heating boilers Certificate inspection every two years (KRS 236.110)
Repairs Permit before any repair affecting strength (KRS 236.240)
Reviewed November 2026

How KRS Chapter 236 shapes boiler repair in Kentucky

Boiler repair in Kentucky is governed by KRS Chapter 236 and the boiler rules in Title 815, Chapter 15 of the Kentucky Administrative Regulations, which together cover inspection intervals, repair permits, test pressures and the records that follow each job. The Boiler Inspection Section, part of the Division of Plumbing within the Department of Housing, Buildings and Construction, administers the program from Frankfort, and its boiler inspectors work alongside commissioned special boiler inspectors employed by insurance companies.

The statute reaches further than many owners expect. KRS 236.060 applies the chapter to all boilers, pressure vessels and related piping in the Commonwealth unless a specific exemption applies, and the related piping includes all boiler external piping built to ASME B31.1. A repair on a steam header near the boiler can therefore fall under the same program as a tube replacement inside it. The national treatment of fault diagnosis, retubing and burner work sits on the boiler repair page; this page covers what changes when the boiler is in Kentucky.

How often is a boiler inspected in Kentucky?

A Kentucky power boiler receives a certificate inspection every year, and low pressure steam heating boilers, hot water heating boilers and hot water supply boilers receive one every two years, under KRS 236.110. The annual power boiler inspection is internal where the construction permits it and external under pressure where possible. A two month grace period may elapse beyond each interval, and the department has discretion to permit longer periods.

The definitions decide which schedule a boiler follows. KRS 236.010 calls a boiler that generates steam above 15 psig a power boiler, and treats steam boilers at or below 15 psig, and water boilers at or below 160 psig and 250 degrees Fahrenheit, as heating boilers. A process steam boiler at a distillery or chemical plant therefore runs on the annual cycle, while a campus hot water plant usually runs on the biennial one.

Kentucky certificate inspection intervals by boiler type
EquipmentKentucky definition or sourceCertificate inspectionWhat it means for repair planning
Power boilerSteam or vapor above 15 psig (KRS 236.010)Every year, internal where construction permits (KRS 236.110)Repairs found at the annual internal are best scoped into the same outage
High pressure, high temperature water boilerWater above 160 psig or 250 F (KRS 236.010)Annual cycle as a power boilerTube and drum work follows ASME Section I repair rules through the NBIC
Low pressure steam heating boilerSteam at or below 15 psigEvery two yearsSection repairs and handhole work are often timed to the biennial visit
Hot water heating and hot water supply boilersWater at or below 160 psig and 250 FEvery two yearsControls, low water cutoffs and relief valves are checked at each visit
Utility power boiler inspected by a special boiler inspectorUtility generating under a KRS 278.020 certificateInterval extended to 18 monthsRepairs align with the longer unit outage cycle
Any boiler past its intervalKRS 236.110(1)(d)Two month grace periodBook repairs inside the grace period

The Kentucky boiler repair permit, step by step

A Kentucky boiler repair permit is required before anyone installs, erects or makes repairs affecting the strength of a boiler or pressure vessel, under KRS 236.240, and the department issues those permits only to holders of the boiler and pressure vessel contractor license created by KRS 236.210. The permit fee covers one interim and one final inspection by the department. The same permit route applies to tube replacement, welded patches, nozzle repairs, drum work and any alteration that changes the boiler’s design conditions.

The statute provides a route for urgent work. Under KRS 236.250, a repair affecting strength may proceed when a boiler inspector or special boiler inspector authorizes it pending the permit, or when the department or an inspector authorizes it as an emergency repair, and the repair permit is then filed with the department within 30 days of completion. Emergency items that leave the strength of the boiler unaffected need no permit when qualified welders working to properly qualified procedures make them.

How common Kentucky boiler repairs move through the permit and inspection route
RepairAffects strength?State of Kentucky boiler permit routeRecords at completion
Firetube or watertube replacementYesPermit under KRS 236.240 before work, inspector consulted on the repair planNBIC repair report, welder and procedure records, test record
Welded patch or crack repair on a shell or drumYesPermit, inspector acceptance of the method, hydrostatic test as directedNBIC repair report with examination results
Tube failure found during an unplanned outageYesInspector authorization pending permit, permit filed within 30 days (KRS 236.250)Same records as a planned repair
Rerate or change of design conditionsYes, an alterationPermit plus engineering for the new rating under NBIC Part 3Alteration report and revised nameplate data
Safety valve repair or resetDevice repairMade by a holder of the National Board V-R certificate (815 KAR 15:026)V-R stamped valve and repair nameplate
Burner, controls, gaskets, refractoryUsually noNo strength permit; safety devices back in working order before return to serviceCombustion and control test sheets

Every welded repair is made under the National Board R program with the inspector consulted before the work starts, because 815 KAR 15:026 requires repairs and alterations to boilers, pressure vessels and their appurtenances to conform to NBIC Part 3. Paul Industries prepares the repair plan, weld procedure and examination method in a form the inspector can review, so the hold points are agreed before the boiler is opened.

What does a boiler inspection consist of in Kentucky?

A Kentucky boiler inspection consists of an internal examination of the waterside and fireside where the construction permits, an external examination of the boiler and its appliances, and a check of safety devices, with the owner responsible for preparing the boiler under 815 KAR 15:026. The preparation list is specific: water drawn off and the boiler washed, manhole and handhole plates, washout plugs and water column plugs removed, the furnace and combustion chambers cooled and cleaned, grates of internally fired boilers removed, brickwork removed as the inspector requires, and leakage of steam or hot water into the boiler blocked off.

Two procedural details shape the schedule. Inspections are conducted within seven days of the inspector’s notice, and inspections by state boiler inspectors take place between 8:00 a.m. and 4:30 p.m. on weekdays, with added fees under 815 KAR 15:027 for work outside those hours. If the boiler is not ready, the inspector may decline to make the inspection and the certificate is withheld until the owner complies. Paul Industries opens, cleans and prepares boilers for the visit and repairs what the inspection finds in the same outage.

Kentucky boiler inspectors also have authority over insulation. When a boiler or vessel is jacketed, enough jacketing comes off at the inspector’s request to judge its condition, and if it cannot be removed at the time, the inspector may order the equipment out of service until a proper examination is possible. Planning access panels into a rebuild saves a later argument.

The Kentucky boiler code: ASME construction and NBIC repair rules

The Kentucky boiler code is made up of KRS Chapter 236 and 815 KAR Chapter 15, which adopt the ASME Boiler and Pressure Vessel Code for construction, the National Board Inspection Code for installation, inspection and repair, and the ASME B31 piping codes for connected piping. New boilers carry the applicable ASME certification mark and a National Board registration number, and existing boilers are maintained to the edition of the ASME Code in force when they were built.

Noncode boilers get specific limits. Under 815 KAR 15:026, a noncode welded steel heating boiler is limited to 15 psi, a noncode cast iron boiler to 15 psi for steam or 30 psi for hot water, and a noncode high pressure boiler is rated by the rules of ASME Section I. The department filed amendments to 815 KAR 15:025 and 15:026 in 2026 that update the referenced NBIC edition and attach the National Board R-1 or R-2 form to the completed repair permit, so Paul Industries works to the edition and paperwork in force on the date each permit is issued.

Testing a repaired boiler under Kentucky rules

A hydrostatic test on a repaired Kentucky boiler follows the test pressure and procedure of its original code of construction, never more than one and one half times the maximum allowable working pressure, or one and one quarter times for a locomotive type boiler, under 815 KAR 15:026. A test meant only to show tightness is held at the set pressure of the lowest safety valve. The regulation also sets a minimum of 80 percent of the MAWP or the relief set pressure, whichever is greater.

Water temperature is part of the rule. The test water is at least ambient and at least 70 degrees Fahrenheit for boilers, and never warm enough to bring the metal above 120 degrees Fahrenheit, which keeps the inspector able to examine joints at close range. Paul Industries supplies the test pump, calibrated gauges and blanks, gags or removes safety valves as the method requires, and records the start pressure, hold time and result for the repair report. Larger system tests are handled under hydrostatic testing.

Accidents, unsafe findings and appeals in Kentucky

Kentucky requires the owner, user or insurer to notify the Boiler Inspection Section immediately when an accident or malfunction leaves a boiler or pressure vessel inoperative, and to give immediate notice by phone or email after any accident causing property damage, injury or loss of life. The boiler and its parts stay undisturbed until an inspector has examined them, except to save a life. That rule matters to the repair schedule, because tubes cannot be cut out and sent for analysis until the inspection has taken place.

A boiler that an inspector finds unsafe stays out of service until it is repaired and inspected again. An owner who disagrees with an inspector’s decision may appeal to the commissioner, who requests a joint inspection by the chief boiler inspector and the inspector. Paul Industries documents the condition, proposes the repair and carries it out once the inspector accepts the plan, with the failure evidence preserved for root cause work.

Boiler external piping and the 50 foot rule

Boiler external piping in Kentucky is part of the regulated installation, built to ASME B31.1 under KRS 236.060, and replacing or adding more than 50 linear feet of pressure piping on an existing installation subjects the entire piping system carrying pressure from the boiler to inspection under KRS 236.110. That threshold can turn a modest header repair into a system review, so the length of pipe replaced belongs in the repair scope from the first walkdown.

New pressure piping is inspected before welded or mechanical joints are covered by insulation, paint or structure, and the contractor notifies the boiler inspection section when the installation is ready. Paul Industries sequences insulation behind the inspection so no joint is buried early. Kentucky piping rules beyond the boiler are covered on process piping in Kentucky, and steam distribution work on steam piping.

Burner work, air permits and the Louisville Metro district

Air permitting for a Kentucky boiler depends on its county: the Kentucky Division for Air Quality handles permits statewide except in Jefferson County, where the Louisville Metro Air Pollution Control District issues construction and operating permits. A burner replacement, fuel change or capacity increase can touch those permits even when the pressure parts are untouched. Boilers at major and area sources also carry federal Boiler MACT obligations under 40 CFR Part 63, Subparts DDDDD and JJJJJJ, including periodic tune-ups.

Paul Industries replaces burners, combustion controls and flame safeguards, performs tune-ups and records combustion results in the form the permit file needs. Boiler water chemistry is a frequent root cause behind tube failures, and the treatment side is covered on boiler water treatment.

Where Kentucky boilers carry the heaviest duty

Kentucky’s heaviest boiler duty sits in process steam: chemical plants along the Ohio River, distilleries in the Bluegrass, automotive and appliance plants, and hospital and university central plants. Each setting brings a different pattern of faults and a different outage window.

Boiler repair, Louisville, KY and Jefferson County

Boiler repair Louisville, KY plants call for ranges from the Rubbertown chemical district in western Louisville to automotive, food and hospital steam plants across Jefferson County. Air permits there run through the Louisville Metro district, which makes burner and fuel work a permit question as well as a mechanical one.

Boiler repair, Lexington, KY, Georgetown and Frankfort

Boiler repair Lexington, KY institutions need tends to center on campus and hospital central plants, while Georgetown and Scott County carry automotive manufacturing at Toyota Motor Manufacturing Kentucky. Frankfort and the surrounding distilleries run process steam for cooking and distillation through long production campaigns.

Bardstown, Paducah, Calvert City and the rest of the state

Bardstown and Nelson County distilleries depend on steam for every batch. Calvert City, east of Paducah, hosts chemical production including Arkema’s plant, which completed a retrofit in 2025. Elizabethtown and Hardin County are watching Ford’s Glendale battery plant retool for energy storage systems, and Northern Kentucky, Owensboro, Bowling Green and Ashland each carry food, metals and institutional steam loads.

Kentucky boiler settings and the repairs they tend to need
SettingTypical boilersFrequent repairsKentucky planning point
Chemical plants, Louisville and Calvert CityWatertube power boilers, waste heat unitsTube leaks, drum internals, economizer corrosionAnnual internal inspection, air permit by county
Distilleries, Bardstown, Frankfort and the BluegrassFiretube and watertube process boilersScale related tube failures, refractory, feedwaterRepairs timed between production campaigns
Automotive and appliance plantsPower boilers for paint and process heatBurner and control upgrades, tube replacementShutdown weeks set the repair window
Hospitals and universitiesSteam and hot water heating boilersSection leaks, low water cutoffs, relief valvesBiennial interval for heating boilers
Utility and cogeneration unitsLarge power boilersWaterwall and superheater repairs18 month interval with a special boiler inspector

One exemption shapes the eastern end of the state. KRS 236.060 places boilers and pressure vessels at oil refineries outside the inspection sections of the chapter, so refinery steam plants follow owner programs instead of the state certificate cycle, while chemical and manufacturing plants in the same counties stay inside it.

Boiler repair or replacement: what a new Kentucky boiler brings with it

The boiler repair or replacement decision in Kentucky turns on condition, efficiency and the paperwork a new unit triggers. A replacement boiler needs the ASME certification mark, a manufacturer’s data report filed with the National Board and the registration number on the data plate, installation to NBIC Part 1, and an installation inspection by a department boiler inspector before the certificate issues. At installation or first inspection, a Commonwealth of Kentucky registration number goes on a metal tag fixed near the manufacturer’s nameplate.

Permit fees for a new installation scale with its dollar value under 815 KAR 15:027, and the connecting piping is inspected before it is covered. Repair usually wins when the shell, drums and furnace are sound and the faults are tubes, refractory or controls. Replacement usually wins when the pressure parts are near the end of their life, the boiler is a noncode unit limited to low pressure, or the plant’s load has changed. Paul Industries prices both routes on the same scope so the comparison is fair, and offers supply-only, design-build and complete installation for a replacement.

How much does boiler repair in Kentucky cost?

The cost of boiler repair in Kentucky depends on the boiler type and size, the number of tubes or the area of shell involved, access through the building, refractory and insulation work, the inspection and test steps the permit requires, and the timing of the outage. State permit and inspection fees are a small part of the total, though inspections requested outside normal department hours carry added charges under 815 KAR 15:027.

The larger cost drivers are outage time and scope growth. A retube on a firetube boiler is predictable once the tube count and sheet condition are known, while watertube repairs can grow once the inspector and the ultrasonic thickness survey see the full furnace. Paul Industries gives a budget range from comparable scope after reviewing the boiler data and inspection report, and a firm price once the boiler is opened or the scope is defined.

What the Kentucky repair record contains

A complete Kentucky repair record gives the next inspector everything needed to accept the work without reopening it. Paul Industries assembles the repair permit and its final inspection, the NBIC repair or alteration report signed by the inspector, the weld procedure specifications and welder continuity records used, material certifications for tubes, plate and fittings, nondestructive examination reports, the hydrostatic test record with gauge calibration, and before and after photographs. The package is filed against the boiler’s Kentucky registration number, so the history follows the unit through future certificate inspections, insurance changes and an eventual sale of the plant.

Who repairs boilers in Kentucky?

Paul Industries repairs boilers in Kentucky: firetube and watertube power boilers, cast iron and steel heating boilers, hot water supply boilers and electric boilers, along with their burners, controls, feedwater equipment and external piping. Paul Industries is headquartered at 256 Shore Drive, Kilmarnock, Virginia, and was formerly based in northern New Jersey, then Pennsylvania. As an East Coast contractor it takes work across Kentucky, in all 50 states and at plants abroad through its international work.

The same scope and documentation standard runs in neighboring states, including boiler repair in Tennessee and boiler repair in Ohio, and at home under boiler repair in Virginia, the headquarters state. Kentucky plants often pair boiler work with pressure vessel fabrication in Kentucky for deaerators and blowdown tanks, industrial welding services in Kentucky for structural and pipe repairs, and validation and commissioning in Kentucky where steam serves regulated processes. Regional coverage is summarized on the Southeast page and the Kentucky hub.

Boiler work from Paul Industries for Kentucky owners

Paul Industries inspects, prepares, repairs, retubes, rebuilds, rerates, tests and replaces boilers for Kentucky plants and institutions, with the repair permit, inspector hold points, hydrostatic test record and NBIC report delivered as one package. For a repair plan or a replacement price, send the boiler data, the latest inspection report and a description of the fault, and request a quote.

Standards referenced: Kentucky Revised Statutes Chapter 236 (boilers and pressure vessels) · 815 KAR 15:025 (new installations) · 815 KAR 15:026 (existing boilers and pressure vessels) · 815 KAR 15:027 (fees and certificates) · National Board Inspection Code (NBIC) Parts 1, 2 and 3 · ASME Boiler and Pressure Vessel Code Sections I and IV · ASME B31.1 Power Piping · 40 CFR Part 63 Subparts DDDDD and JJJJJJ

Frequently asked questions

Who handles boiler repair for Louisville plants and the Rubbertown chemical district?

Paul Industries handles boiler repair for Louisville plants, hospitals and the Rubbertown chemical district in western Jefferson County. Chemical plant boilers there run hard and often carry waste heat units and economizers, so tube leaks and corrosion repairs are routine work. Burner changes in Jefferson County also run through the Louisville Metro Air Pollution Control District, and Paul Industries records combustion results in the form that permit file needs.

Does Paul Industries repair boilers in Lexington, Georgetown and the Bluegrass distilleries?

Yes. Paul Industries repairs campus and hospital boilers in Lexington, manufacturing boilers in Georgetown and Scott County, and process steam boilers at distilleries around Frankfort, Lawrenceburg and Versailles. Distillery boilers run long campaigns and scale is a frequent cause of tube failure, so repairs are paired with a water chemistry review and timed to the gap between production runs.

Who repairs steam boilers at chemical plants in Paducah and Calvert City?

Paul Industries repairs watertube and firetube steam boilers at chemical plants in Calvert City and Paducah in western Kentucky. These boilers sit on the annual certificate cycle as power boilers, so repairs found at the internal inspection are usually scoped into the same outage. Paul Industries prepares the permit, coordinates the inspector’s hold points and returns the unit with a full NBIC repair report.

What is the Kentucky boiler repair permit, and when is it needed?

The Kentucky boiler repair permit is the permit KRS 236.240 requires before any repair affecting the strength of a boiler or pressure vessel, such as tube replacement, welded patches, nozzle repairs or drum work. The department issues it to holders of the boiler and pressure vessel contractor license, and its fee covers an interim and a final inspection. Work that leaves strength unaffected, such as burner and control repairs, needs no strength permit.

How does an urgent tube failure get repaired before a Kentucky permit is issued?

KRS 236.250 lets a boiler inspector or special boiler inspector authorize a repair pending issuance of the permit, and lets the department or an inspector authorize emergency repairs. The repair permit is then filed with the department within 30 days of completion. Paul Industries contacts the inspector with the proposed method, makes the repair once it is authorized and files the paperwork within the statutory window.

What does a Kentucky state boiler inspection check on a heating boiler?

A Kentucky state boiler inspection on a heating boiler checks the internal surfaces where the construction allows, the external condition, the low water cutoff, operating and limit controls, the relief valve and the gauges. Heating boilers receive a certificate inspection every two years under KRS 236.110. Paul Industries prepares the boiler, opens inspection openings and repairs any deficiency the inspector records.

Who are Kentucky boiler inspectors, and who pays for the inspection?

Kentucky boiler inspectors are department employees in the Boiler Inspection Section, and special boiler inspectors are commissioned inspectors employed by insurance companies authorized to insure boilers in Kentucky. Boilers covered by an insurance policy are commonly inspected by the insurer’s special boiler inspector, who reports on the National Board form to the section. Uninsured units are inspected by the department, which charges the inspection fees set in 815 KAR 15:027.

Can a Kentucky boiler run while its certificate inspection is overdue?

KRS 236.110 allows a two month grace period beyond the annual or biennial interval, and the department may permit longer periods at its discretion. A certificate can be suspended when the owner refuses an inspection or the required fee, under 815 KAR 15:027. Paul Industries schedules the inspection preparation and any repairs so the boiler is ready before the grace period runs out.

What hydrostatic test pressure applies after a boiler repair in Kentucky?

The test follows the original code of construction and stays at or below one and one half times the MAWP, or one and one quarter times for a locomotive type boiler, under 815 KAR 15:026. A tightness test is held at the lowest safety valve set pressure, and the minimum is 80 percent of the MAWP or the relief set pressure. Water is at least 70 degrees Fahrenheit and the metal stays at or below 120 degrees.

Who may repair a boiler safety valve in Kentucky?

Repairs or alterations to pressure relieving devices in Kentucky are made by a firm holding the National Board certificate of authorization for the V-R stamp, and the valve is stamped on completion, under 815 KAR 15:026. Safety appliances may only be removed or worked on during operation under an inspector’s direction, and a valve repaired during an outage is reinstalled and working before the boiler returns to service.

Does Kentucky law cover boilers at oil refineries?

KRS 236.060 exempts boilers and pressure vessels located at oil refineries from KRS 236.005 to 236.150, along with boilers under federal control and small residential heating boilers. Refinery steam plants therefore follow owner and insurer programs built on the NBIC and API practices. Paul Industries repairs boilers in either setting and documents the work to the same NBIC standard.

What should a plant do first after a boiler accident in Kentucky?

The owner, user or insurer notifies the Boiler Inspection Section immediately by phone or email and submits a detailed report, under 815 KAR 15:026. The boiler and its parts stay undisturbed until a boiler inspector or special boiler inspector has examined them, except to save a life. Paul Industries then documents the damage with the inspector, preserves failed parts for analysis and proposes the repair.

Can a used boiler be installed at a Kentucky plant?

A used boiler can be installed after a boiler inspector inspects it before it goes into service, which may include internal and external examination, a hydrostatic test or other nondestructive examination, under 815 KAR 15:026. Fittings and appliances on a reinstalled boiler must meet the ASME Code edition the regulation references. Paul Industries surveys the unit, repairs it to NBIC Part 3 and installs it with the required inspection.

Does a burner replacement need an air permit change in Kentucky?

A burner replacement can affect an air permit when it changes fuel, heat input or emissions, and the permitting agency is the Kentucky Division for Air Quality everywhere except Jefferson County, where the Louisville Metro Air Pollution Control District issues permits. Paul Industries supplies burner data, emissions guarantees and combustion test results, and installs and tunes the burner once the permit question is settled.

How are low water cutoffs handled when a Kentucky boiler is repaired?

Low water cutoffs, water columns and their connections are opened for the inspector, cleaned and tested, and the proposed 2026 amendment to 815 KAR 15:026 adds water level probes and gauge glasses to the items removed for inspection. Paul Industries replaces worn cutoffs and probes, tests them by evaporation or blowdown as the design allows, and records the trip points before the boiler returns to service.

When does replacing steam piping make a Kentucky boiler repair bigger?

Replacing or adding more than 50 linear feet of pressure piping on an existing installation subjects the entire piping system carrying pressure from the boiler to inspection under KRS 236.110, and it is brought up to the standards of KRS 236.040. Paul Industries measures the length involved during scoping so the owner knows in advance whether a header repair will trigger the wider review.

What documents give the most accurate price for boiler repair in Kentucky?

The boiler’s National Board and Kentucky registration numbers, the manufacturer’s data report, the latest inspection report with any recommendations, the operating pressure and fuel, photographs of the fault and access route, and the outage window available. With those, Paul Industries gives a budget range from comparable scope and a firm price once the boiler is opened and inspected.

Boiler down or due for inspection in Kentucky?

Send the boiler make, model and registration numbers, the latest inspection report and a description of the fault or finding. Call 201-450-8280 or request a quote.