Paul Industries provides chiller repair in New Jersey for manufacturing plants, hospitals, laboratories, data centers and commercial buildings, diagnosing and repairing centrifugal, screw and scroll machines and keeping the state inspection and refrigerant records in order. New Jersey adds two layers to every chiller job: the Department of Labor’s refrigeration inspection rules under N.J.A.C. 12:90, and a state HFC law that has governed new chillers since January 1, 2024. Headquartered at 256 Shore Drive in Kilmarnock, Virginia, and formerly based in northern New Jersey, Paul Industries repairs, overhauls, retrofits and replaces chillers from Bergen County to Cape May.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
State inspection Refrigeration plants every 12 months (N.J.S.A. 34:7-25)
Inspection threshold Over 18 tons for nonflammable, nontoxic refrigerants (NJDOL)
State HFC law Restricted HFC chillers barred from January 1, 2024 (N.J.S.A. 26:2C-61)
Industrial power 11.93 cents/kWh, against a US average of 8.13 (EIA, 2024)
Reviewed November 2026

What does chiller repair in New Jersey cover?

Chiller repair in New Jersey covers fault diagnosis, refrigerant leak search and repair, compressor, bearing and motor work, starter and control repair, condenser and evaporator tube service, and the paperwork a New Jersey owner keeps for the state inspector and for the EPA. The machines are the same centrifugal, screw and scroll designs found everywhere, so the fault-by-fault guide on the national chiller repair page applies here as well. What New Jersey changes is the regulatory file that sits beside each machine, the age and density of the buildings the chillers serve, and an electricity price that turns every efficiency loss into a measurable cost.

A repair visit in a New Jersey plant room starts with the readings that serve diagnosis and compliance at once: suction and discharge pressures, evaporator and condenser approach temperatures, oil condition, purge run time on low-pressure machines, and the refrigerant added since the last visit. The same numbers feed the leak rate calculation the EPA now requires and the annual state inspection, so one set of logs carries the repair, the inspector’s questions and the owner’s maintenance history. Paul Industries returns those readings with every service report, alongside the parts replaced and the refrigerant recovered or charged.

Which New Jersey chillers fall under state refrigeration inspection?

New Jersey chillers fall under state refrigeration inspection when they cross the thresholds in the state’s boiler, pressure vessel and refrigeration law (N.J.S.A. 34:7), administered by the Department of Labor’s Mechanical Inspection Bureau under N.J.A.C. 12:90. For the nonflammable, nontoxic refrigerants in most screw and scroll chillers and many centrifugal machines, a system rated over 18 tons of refrigerating capacity or driven by more than 36 horsepower is inspected, and so is any such system operating above 15 psig whatever its size. Systems using refrigerants that ASHRAE 34 classes as flammable or of higher toxicity come under inspection above three tons or six driving horsepower.

Inspection is annual. The statute sets 12-month intervals for refrigeration plants, the inspection is made either by the state or by an authorized insurance company inspector, and the certificate issued after a satisfactory inspection is displayed at the plant. The Department of Labor’s own guide lists a penalty of $500 to $5,000 for each day a certificate is missing, and the statute holds the owner, lessee or operator responsible for running equipment in violation. A compressor change, a new machine or a refrigerant conversion is therefore best reflected in the plant file well before the next inspection date, and Paul Industries leaves behind the nameplate data, pressure test results, refrigerant charge and repair description the inspector will look for.

New Jersey refrigeration inspection thresholds and what they mean for a chiller owner
Refrigerant class (ASHRAE 34)Inspected when the system isTypical machinesWhat the owner keeps on file
Nonflammable, lower toxicity (A1), such as R-134a, R-410A and R-22Over 18 tons, or over 36 driving horsepowerMost water-cooled and air-cooled chillers in commercial and industrial buildingsCurrent certificate, repair records, leak rate calculations under the EPA rule
Nonflammable, lower toxicity, high operating pressureOperating above 15 psig, at any capacitySmall high-pressure systems that fall under the tonnage thresholdCertificate and the same repair and leak records
Flammable or higher toxicity (A2, A3, B1, B2, B3)Over three tons, or over six driving horsepowerAmmonia process and cold storage systems, some low-pressure centrifugal machinesCertificate, operator license records, process safety documents where the TCPA applies

What are the NJ refrigeration license requirements for a chiller plant?

The NJ refrigeration license requirements for a chiller plant depend on its refrigerant: N.J.A.C. 12:90-3.8 sets the grades of license required to operate refrigeration plants using highly toxic, toxic or flammable refrigerants, and the chief engineer or shift engineer of such a plant must hold at least the grade the rule’s Table 3.8 assigns to that plant. The grades run from the first-grade gold seal through the second-grade red seal to the third-grade blue seal refrigeration license, and refrigeration plants carry the class designations 2A, 2B and 2C.

The question comes up most at industrial sites: ammonia refrigeration in food processing and cold storage, and process refrigeration in chemical plants. A plant holding anhydrous ammonia above the threshold quantities in N.J.A.C. 7:31-6 also falls under the NJDEP Toxic Catastrophe Prevention Act program, whose operating procedure rules address mechanical refrigeration using anhydrous ammonia in a closed loop. Repairs at those plants are planned around the plant’s own procedures, lockout practice and the license holder in charge of the plant, and Paul Industries hands over the pressure tests, material records and change documentation the process safety file needs. Ammonia systems themselves are covered on the ammonia refrigeration page.

Low-pressure centrifugal chillers charged with R-123 deserve a specific check, because ASHRAE 34 places R-123 in safety group B1, a higher-toxicity class with no flame propagation. Owners of those machines confirm with their inspector which inspection and license provisions their plant falls under, and keep the answer in the plant file so that every repair is planned against it.

How do New Jersey’s HFC law and the EPA rules shape a chiller repair?

New Jersey’s HFC law and the EPA’s AIM Act rules shape a chiller repair by deciding which refrigerants a new or replacement machine may use and how leaks on existing machines are tracked and fixed. Under N.J.S.A. 26:2C-61, enacted as P.L. 2019, c.507, no one may sell, lease, install or introduce into New Jersey commerce a centrifugal or positive displacement chiller that uses a restricted HFC substitute, and the chiller restriction took effect on January 1, 2024. Equipment manufactured before that date may still be installed and used, and the law leaves existing machines in service unless they are retrofitted.

Federal rules apply on top of the state law. EPA’s Technology Transitions rule limits new comfort-cooling chillers to refrigerants below a global warming potential of 700 from January 1, 2025, with industrial process chillers following in 2026. The EPA’s leak repair rule, in force since January 1, 2026, reaches any appliance charged with at least 15 pounds of HFC refrigerant: each top-off triggers a leak rate calculation, and a machine over its threshold (10 percent for comfort cooling, 20 percent for commercial refrigeration, 30 percent for industrial process refrigeration) gets a repair inside 30 days, stretched to 120 days where fixing it means shutting down an industrial process, followed by verification tests. HFC supply keeps shrinking under the phasedown, from 60 percent of baseline today to 30 percent in 2029.

State and federal rules a New Jersey chiller repair has to respect
RuleSet byWhat it coversEffect on the repair
N.J.A.C. 12:90 inspectionNJ Department of LaborAnnual inspection and certificate above the tonnage, horsepower and pressure thresholdsRepair records and pressure tests go into the plant file before the next inspection
N.J.A.C. 12:90-3.8 licensesNJ Department of LaborLicense grades for plants using toxic, highly toxic or flammable refrigerantsWork is scheduled with the license holder in charge of the plant
N.J.S.A. 26:2C-61New Jersey LegislatureRestricted HFC substitutes in new centrifugal and positive displacement chillers from January 1, 2024Replacement and retrofit refrigerants are chosen against the state list as well as the federal one
Toxic Catastrophe Prevention Act, N.J.A.C. 7:31NJDEPFacilities above threshold quantities of extraordinarily hazardous substances, including anhydrous ammoniaChanges follow the plant’s process safety and operating procedures
EPA Emissions Reduction and Reclamation, 40 CFR 84.106EPALeak rate calculation, repair deadlines and verification tests for HFC appliances of 15 pounds or moreEvery refrigerant addition is recorded and every repair is verified
EPA Technology TransitionsEPAGWP limits on refrigerants in new chillersA replacement machine uses a lower-GWP refrigerant than most existing units
Uniform Construction Code, N.J.A.C. 5:23NJ Department of Community AffairsPermits for new and replacement equipment; mechanical subcode based on the 2021 International Mechanical CodeReplacements need a construction permit and inspection through the municipal construction official

How the New Jersey summer works a chiller

The New Jersey summer works a chiller with heat and humidity together: Newark’s 1991 to 2020 July normals are an 87 degree Fahrenheit average high and a 69 degree average low, and the humid air behind those numbers keeps latent load on the plant through the night. Cooling towers can cool condenser water only toward the wet bulb temperature, so the muggy afternoons of July and August raise the condenser water temperature, increase compressor lift and expose every fouled tube and weak tower fan as high head pressure.

Geography adds its own stresses. Rooftop plants in dense North Jersey cities often sit in tight enclosures where hot discharge air from one condenser is drawn into the next, which raises condensing pressure on exactly the days the building needs full capacity. Air-cooled machines near the Shore face salt-laden air that corrodes fins and brazed joints. Inland plants in the Highlands and the northwest see colder winters, so idle evaporators and outdoor piping need freeze protection.

New Jersey regions and where chiller repair effort tends to go
RegionTypical buildingsCommon chiller stressesRepair and service emphasis
North Jersey: Newark, Jersey City, Paterson, Elizabeth and the MeadowlandsOlder high-rise offices, hospitals, warehouses, colocation data centersRooftop air recirculation, cramped plant rooms, long run hoursRigging plans for tight sites, condenser airflow corrections, compressor overhauls
Central Jersey: Edison, New Brunswick, Princeton and the Route 1 corridorPharmaceutical and biotech plants, research labs, university central plantsProcess loads tied to batches, validated areas, year-round lab coolingRepairs timed to production windows, change records for validated systems
Trenton and the Delaware ValleyGovernment buildings, hospitals, manufacturing plantsPeak summer loads, older central plantsTube cleaning, eddy current testing, staged overhauls in the cool months
South Jersey and the Shore: Camden, Vineland and the coastal countiesFood processing, cold storage, hospitals, hotelsSalt air on air-cooled condensers, glycol and process loadsCoil inspection and coating, glycol strength checks, leak searches at corroded joints

Industrial, commercial and HVAC chiller repair across New Jersey buildings

Industrial, commercial and HVAC chiller repair across New Jersey buildings follows the same diagnostic method but very different schedules, because a pharmaceutical plant, an office tower and a hospital each tolerate a chiller outage in their own way. The schedule sets how parts are staged, whether temporary cooling is connected and which records the owner needs when the machine returns to service.

Industrial chiller repair in New Jersey plants

Industrial chiller repair in New Jersey plants is planned against the production calendar. Pharmaceutical and biotech sites in Middlesex, Somerset and Mercer counties, chemical and refining operations around Linden and the Arthur Kill, and food plants in South Jersey all run cooling tied to batches or lines, so a failed chiller can stop product as well as comfort. Paul Industries plans repairs into scheduled shutdowns where possible, carries the likely parts into the window, and supplies change and test records for chillers serving validated areas. Machines dedicated to a single line or process are covered on the process chillers page.

Commercial chiller repair in New Jersey offices, campuses and public buildings

Commercial chiller repair in New Jersey offices, campuses and public buildings is booked into low-occupancy periods: Saturdays and Sundays, holiday weeks, and the spring and autumn months when one machine can carry the building. Large repairs are booked from late autumn into spring, and temporary chillers are brought in when the work must run into warm weather. Public buildings add procurement rules, and public work in New Jersey falls under the state’s prevailing wage law, which the contract documents set out before the work starts.

HVAC chiller repair at hospitals and laboratories

HVAC chiller repair at hospitals and laboratories carries particular stakes, because the same plant serves comfort cooling and spaces where temperature and humidity limits are part of patient safety or research integrity: operating rooms, pharmacies, vivariums and instrument rooms. Ahead of any isolation, Paul Industries compares the capacity left in the plant with the cooling the critical areas will draw during the outage, verifies that their air handlers will hold setpoint on the reduced plant, and ties in a rental machine wherever that margin is narrow.

Data center chillers in New Jersey

Data center chillers in New Jersey carry load in every season, so Paul Industries takes them out of service singly, following a written method of procedure and proving the redundant capacity first. The wider plant around them is described on data center cooling systems in New Jersey, and new halls and campus expansions on data center mechanical contractor in New Jersey.

How often should chiller tubes be cleaned?

Chiller condenser tubes on open cooling tower systems are commonly cleaned once a year, and sooner wherever the condenser approach temperature climbs between cleanings; evaporator tubes on closed chilled water loops usually need cleaning far less often. The approach temperature, the difference between the leaving condenser water and the condensing refrigerant temperature, is the practical trigger, because it rises as scale, silt and biological film build up inside the tubes.

New Jersey towers work hard through humid summers and collect pollen, dust and biological growth, so many owners clean condenser tubes in the spring before the season and inspect again after it. Eddy current testing, which measures wall loss and pitting from inside each tube, is often repeated every three to five years, sooner where earlier results showed wall loss. Paul Industries brushes tubes mechanically, descales them chemically where hard scale resists brushing, then tests and trends the results so the owner sees how fast the bundle is wearing. Fouling that returns quickly points back to the tower and its water, which leads to cooling tower repair or a review of the treatment program.

Chiller replacement checklist for New Jersey facilities

A chiller replacement checklist for New Jersey facilities adds state permits, inspection and refrigerant law to the usual engineering steps, so the list below follows a replacement from the first load study to the first state inspection of the new machine. Paul Industries manages each step under one contract, from design and supply through installation, startup and records.

Chiller replacement checklist for a New Jersey building or plant
StepWhat is decided or doneNew Jersey item to settle
1. Load and tonnage reviewMeasured load profile, future growth, redundancySize to the peak humid-day load rather than an average day
2. Refrigerant and machine selectionMachine type, efficiency at part load, refrigerant safety classRefrigerant permitted under N.J.S.A. 26:2C-61 and the EPA GWP limit; inspection and license class under N.J.A.C. 12:90
3. PermitsConstruction permit for mechanical, electrical and structural workUniform Construction Code permit; machinery room provisions of the 2021 International Mechanical Code and ASHRAE 15
4. Electrical serviceFeeder, starter or drive, utility coordinationService changes with the serving utility, such as PSE&G, JCP&L, Atlantic City Electric or Rockland Electric
5. Rigging and accessCrane, route through the building, roof or slab loadingStreet and sidewalk permits on dense North Jersey sites
6. Removal of the old machineRefrigerant recovery and records, oil disposal, demolitionRecovered quantities recorded for the owner’s EPA file
7. Installation and tie-inSetting, piping, electrical, controls, insulationCode inspections by the municipal construction official
8. Startup and turnoverPressure test, evacuation, charge, startup, performance checkInspection and certificate for the new refrigeration system

Piping changes around a replacement, such as new headers, valves or a bypass for temporary cooling, are described on process piping in New Jersey, and heating plants sharing the same mechanical room on boiler repair in New Jersey.

Repair or replace at New Jersey electricity prices

Repair or replace decisions in New Jersey weigh energy more heavily than in most states, because the 2024 average industrial electricity price in New Jersey was 11.93 cents per kilowatt-hour, against a national industrial average of 8.13 cents (EIA). Fixing tends to win when the compressor and tubes are healthy and the refrigerant has a future; a replacement study tends to win when eddy current shows thinning tubes, the charge is R-22 or R-123, the leak rate keeps breaching the EPA threshold and part-load efficiency has drifted well below the nameplate.

As an illustration with stated assumptions, a 400-ton chiller that runs the equivalent of 2,500 full-load hours a year and improves by 0.20 kilowatts per ton after replacement saves about 200,000 kilowatt-hours a year, worth roughly $23,860 at 11.93 cents. Paul Industries runs the same calculation on the owner’s own tonnage, trend data and tariff before recommending either path, and prices the repair and the replacement side by side.

Who repairs chillers in New Jersey?

Paul Industries repairs chillers in New Jersey, taking chiller service and repair work in Newark, Jersey City, Paterson, Elizabeth, Edison, New Brunswick, Princeton, Trenton, Camden and the Meadowlands, and in every other part of the state. The company is headquartered at 256 Shore Drive in Kilmarnock, Virginia, where its chiller repair in Virginia page covers the headquarters state, and it takes work across the East Coast, in all 50 states and at plants abroad through its international work.

Paul Industries works on centrifugal, screw and scroll chillers of the major makes, including Trane chiller repair, and covers the towers, pumps and piping around them, so one diagnosis follows a fault wherever it sits in the plant. Chiller contractors in New Jersey are often called for the machine alone; keeping the chiller, the tower and the water side under one contract removes the gaps where a recurring fault can hide.

What does chiller repair cost in New Jersey?

Chiller repair cost in New Jersey depends on what failed, which parts it takes, the tonnage and compressor type, how much refrigerant must be pulled out and put back, how hard the plant room is to reach, whether rental cooling is needed and what month the work lands in. Replacing a sensor or a bearing costs far less than rebuilding a compressor, and a full machine swap adds cranes, permits, electrical and piping on top of the equipment.

Refrigerant has become a cost line of its own: older HCFC machines now depend on reclaimed supply, and HFC prices respond to each phasedown step, so a large leak can cost more in refrigerant than in labor. Work on public buildings carries prevailing wage rates. Each Paul Industries repair price follows the diagnosis and itemizes parts, refrigerant pounds and labor hours, and any major repair proposal carries a replacement budget next to it for a direct comparison.

Chiller service and repair from Paul Industries in New Jersey

Paul Industries repairs, overhauls, retrofits, maintains, supplies and installs chillers for plants, hospitals, laboratories, data centers and commercial buildings throughout New Jersey, and keeps the inspection, leak and repair records that the state and the EPA expect. Scheduled chiller service in New Jersey runs under service contracts covering seasonal startup, logs, tube work and refrigerant analysis against AHRI 700. To scope a repair, send the nameplate details, refrigerant type and pounds, the alarm list and a few weeks of logs; for a replacement study, include the building’s load profile and the electric tariff it pays. Call 201-450-8280 or request a quote. Other services Paul Industries performs for New Jersey owners, from sanitary piping to water systems, are gathered on the New Jersey page.

Standards referenced: N.J.S.A. 34:7 (New Jersey boiler, pressure vessel and refrigeration law) · N.J.A.C. 12:90 (Boilers, Pressure Vessels and Refrigeration) · N.J.A.C. 7:31 (Toxic Catastrophe Prevention Act program) · N.J.S.A. 26:2C-61 (P.L. 2019, c.507, HFC restrictions) · New Jersey Uniform Construction Code, N.J.A.C. 5:23 (mechanical subcode: International Mechanical Code 2021) · EPA AIM Act HFC phasedown (40 CFR Part 84) · EPA Emissions Reduction and Reclamation rule, 40 CFR 84.106 · EPA Technology Transitions rule · ASHRAE 15 · ASHRAE 34 · AHRI 700

Frequently asked questions

Who provides chiller repair in North Jersey, from Newark and Jersey City to Paterson and the Meadowlands?

Paul Industries provides chiller repair in North Jersey, including chiller repair in Newark, Jersey City, Paterson, Elizabeth, Hackensack and the Meadowlands warehouse and data center district. Many plants there sit on rooftops or in basement plant rooms of older buildings, so a repair plan often includes a rigging route, condenser airflow corrections and a check on how hot discharge air recirculates between closely spaced rooftop units.

Does Paul Industries handle chiller repair in Edison, New Brunswick and along the Route 1 corridor?

Yes. Paul Industries handles chiller repair in Edison, New Brunswick, Piscataway, Princeton and the Route 1 corridor, where pharmaceutical plants, research labs and university central plants depend on chilled water around the clock. Repairs there are usually timed to production or academic calendars, and machines serving validated areas leave with change records, test results and a description of the work for the site’s quality system.

Who provides chiller repair in South Jersey, from Camden and Trenton to Vineland and the Shore?

Paul Industries provides chiller repair in South Jersey and the Delaware Valley, covering Camden, Trenton, Cherry Hill, Vineland and the coastal counties. Food processing and cold storage plants there run glycol and process loads, and air-cooled chillers near the Shore lose fins and brazed joints to salt air. Service visits in the region include coil inspection, glycol strength checks and leak searches at corroded connections.

Which NJ refrigeration license applies to a plant that runs ammonia refrigeration?

Plants that use toxic, highly toxic or flammable refrigerants, ammonia among them, fall under N.J.A.C. 12:90-3.8, which sets the minimum license grade the chief engineer or shift engineer must hold for that plant. The grades are the first-grade gold seal, the second-grade red seal and the third-grade blue seal. Paul Industries schedules ammonia work with the plant’s license holder and follows the plant’s operating and lockout procedures throughout.

How often does the state inspect a chiller in New Jersey?

Every 12 months, for systems above the thresholds. The statute sets 12-month inspection intervals for refrigeration plants, and the inspection is made by the Department of Labor or by an authorized insurance company inspector, who reports to the state. A chiller on a nonflammable, nontoxic refrigerant comes under inspection above 18 tons or 36 driving horsepower, or above 15 psig at any size.

What happens if a chiller's inspection certificate lapses in New Jersey?

The Department of Labor’s guide lists a penalty of $500 to $5,000 for each day a required certificate is missing, and the statute makes the owner, lessee or operator liable for running equipment in violation, with penalties of $500 to $10,000 for a first offense. Owners avoid that exposure by scheduling repairs and refrigerant changes so the file is complete before the inspection falls due.

Can a chiller built before 2024 still be installed in New Jersey?

Yes. New Jersey’s HFC law, N.J.S.A. 26:2C-61, applies its chiller restriction from January 1, 2024, and states that equipment manufactured before the effective date may still be sold, installed and used. A stored or relocated pre-2024 machine can therefore be set and started, subject to the construction permit, the state refrigeration inspection and the EPA’s leak rules for its refrigerant.

Does New Jersey's HFC law force an existing chiller to be replaced?

The law leaves existing chillers in service, and they can keep being repaired and recharged with their current refrigerant. The state restriction reaches new equipment introduced after January 1, 2024 and existing equipment that is retrofitted. The practical pressure on older machines comes from refrigerant cost and supply under the federal phasedown and from the EPA’s leak repair deadlines, which Paul Industries weighs in every repair or replace recommendation.

Why does condenser approach temperature creep up on New Jersey chillers in late summer?

Months of humid weather keep cooling towers running hard, and tower water carries pollen, dust and biological growth into the condenser tubes, where film and scale insulate the tube wall. As the film thickens, the gap between leaving condenser water and condensing refrigerant grows, and so does compressor power. A rising approach is the signal to brush the tubes and review tower water treatment before the next heat wave.

What does chiller replacement cost per ton in a New Jersey facility?

Cost per ton varies widely with machine type, refrigerant, rigging, electrical service changes, piping modifications, permits and temporary cooling, and small machines cost more per ton than large ones. Prevailing wage on public work and tight access in older North Jersey buildings raise the figure. Paul Industries gives a budget number drawn from similar jobs as soon as tonnage and site conditions are known, and a firm number once the access, structure and electrical service have been surveyed.

How should a plant compare chiller companies in New Jersey?

Look at whether one contract covers the chiller, tower, pumps and piping; whether the service report includes approach temperatures, oil and refrigerant analysis and leak rate calculations; and whether the records will satisfy the state inspector and the EPA. Paul Industries covers all of those under a single contract and sends a sample service report and scope with every proposal.

What does chiller maintenance in New Jersey include under a Paul Industries contract?

A Paul Industries maintenance contract in New Jersey includes spring startup and winter layup, trend review of the daily logs, the EPA leak rate paperwork, laboratory analysis of oil and refrigerant, vibration trending, condenser tube brushing and scheduled eddy current tests, all filed the way the annual state inspector expects to see them. Contracts can extend to the cooling towers, pumps and water treatment serving the chillers, so the whole plant sits under one program.

Can industrial chiller repair be scheduled around a pharmaceutical batch campaign?

Usually, yes. Paul Industries reviews the campaign schedule, identifies the windows when cooling demand drops, stages parts and refrigerant ahead of the window, and arranges temporary cooling for any load that must continue. For chillers serving validated areas, the work is documented so the site’s quality team can close the change record without delay once the machine returns to service.

Are R-123 centrifugal chillers treated differently under New Jersey's refrigeration rules?

R-123 sits in ASHRAE 34 safety group B1, a higher-toxicity class with no flame propagation, and New Jersey’s inspection thresholds and license rules distinguish refrigerants by toxicity and flammability. Owners of low-pressure centrifugal machines therefore confirm which provisions apply to their plant and keep that answer on file. Separately, virgin R-123 imports end in 2030, so leak tightness and purge performance matter more each year.

Can the same contractor repair a New Jersey chiller and then replace it if repair stops making sense?

Yes. When Paul Industries both diagnoses and replaces, the findings from the failed machine feed straight into sizing and specifying the new one. Paul Industries furnishes the replacement or sets a machine the owner buys, pulls and records the old refrigerant, rigs, pipes and wires the new unit, starts it up and compiles the paperwork for permit closeout and the first state inspection.

Is a high-efficiency chiller worth it at New Jersey's industrial power price?

Often, for plants with long run hours. At 11.93 cents per kilowatt-hour, the 2024 New Jersey industrial average, each kilowatt saved for 2,500 equivalent full-load hours is worth about $298 a year. Paul Industries applies that arithmetic to the owner’s actual tonnage, run hours and tariff, then compares the savings with the cost gap between repairing the old machine and replacing it.

How is temporary cooling arranged for a hospital chiller outage in Central Jersey?

The plan starts with the hospital’s remaining capacity and the expected load for the outage window, then adds a rental chiller where redundancy is thin. Valved, capped connections on the chilled water headers make the hookup quick; plants without them get a permanent cut-in during the repair. Work proceeds under the hospital’s outage and infection control procedures, and the repaired machine is proven on load before the rental leaves.

What information does Paul Industries need to price a New Jersey chiller job?

Send the make, model and serial number, the refrigerant and charge, the alarm or fault history, recent operating logs, the last service report, refrigerant addition records and the current state inspection certificate. Photos of the nameplate, starter and condenser coils help on older or rooftop machines. Paul Industries plans the diagnostic visit from that information and prices the repair with parts, refrigerant and labor listed separately.

Chiller down or underperforming in New Jersey?

Tell us the chiller’s nameplate data, its refrigerant, what alarms it is showing and when its state certificate expires. Call 201-450-8280 or request a quote.