Paul Industries is a US process equipment contractor for Italy, designing and fabricating pressure vessels, process skids, purified water and WFI systems, tanks and sanitary piping in the United States for pharmaceutical plants in Lazio and Tuscany, chemical producers in Lombardy and dairy and food processors in Emilia-Romagna. Equipment arrives built to the Pressure Equipment Directive as Italy applies it, with instructions in Italian, a 400 V, 50 Hz electrical design and the data an Italian operator needs for its INAIL commissioning verification under DM 329/2004. After a factory acceptance test and a crossing to Genoa, La Spezia, Livorno or Trieste, Paul installs, starts up and commissions the system at the plant, or supervises the installation, and hands over the full qualification file.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Italian pressure law D.Lgs. 93/2000 as amended by D.Lgs. 26/2016 (PED)
Putting into service DM 329/2004 with INAIL commissioning verification
Power 230/400 V three phase, 50 Hz
GMP regulator AIFA, in the PIC Scheme since 2000
Main ports Genoa, La Spezia, Livorno, Trieste
Reviewed November 2026

What does a US process equipment contractor for Italy build?

A US process equipment contractor for Italy builds plant equipment that clears two separate gates: the European rules for placing it on the market, and the Italian rules for putting it into service and keeping it in service. Paul Industries, headquartered at 256 Shore Drive in Kilmarnock, Virginia, works to both, and takes projects in Italy alongside its work in all 50 US states and the countries listed on the international projects page.

Italian plants order from Paul the equipment at the heart of a production line. Pharmaceutical and vaccine sites buy purified water and WFI systems, clean steam, CIP skids and formulation vessels. Chemical producers buy pressure vessels and reactors, heat exchangers and alloy piping modules. Dairies and food plants buy process and storage tanks and sanitary process piping with hygienic welds and drainable runs. Each order follows the route the plant prefers: equipment supply with installation supervision, design-build from a process specification, or a complete turnkey process system taken through qualification.

An Italian buyer who looks to the United States for process equipment usually wants something specific: capacity during an investment peak, a builder already fluent in ASME BPE and FDA documentation for products bound for the US market, or a supplier who designs, fabricates, ships and commissions under one contract. Paul offers all three without lowering the plant’s specification.

Where do pharmaceutical companies in Italy make their medicines?

Pharmaceutical companies in Italy produce across three main regions, Lazio around Rome and Latina, Lombardy around Milan, and Tuscany around Siena and Florence, and Italian medicine output has grown into an export industry. Farmindustria, the industry association, reports that its member groups produced medicines worth about 56.1 billion euros in 2024, 87 percent more than in 2016, and exported about 53.8 billion euros, more than 90 percent of what they made.

GSK alone runs three Italian production plants, at San Polo di Torrile near Parma, at Rosia near Siena and at Aprilia in the province of Latina, and its Siena and Rosia sites together turn out roughly 60 million vaccine doses a year, with a further plan of about 260 million euros announced for Rosia in 2024. These sites are named as market facts; they show what Italian plants buy, from sterile injectable and vaccine utilities to oral solid and API process systems, and say nothing about any Paul project. Biotech companies in Italy, many of them spun out of universities in Milan, Rome, Siena and Naples, follow the same path at a smaller scale and soon need stainless utilities sized for commercial batches.

Italian production regions and the equipment their plants buy
RegionIndustry profile (market facts)Typical receiving portWhat Paul Industries supplies
Lazio (Rome, Latina, Aprilia)Large pharmaceutical production base, including GSK at ApriliaLivorno or Naples, then roadWFI and clean steam, formulation vessels, CIP and SIP skids
Lombardy (Milan, Varese, Bergamo)About 1,700 chemical companies and over 45,000 chemical jobs, plus pharmaceutical and API sitesGenoa or La SpeziaReactors, receivers, alloy piping, solvent recovery skids
Tuscany (Siena, Florence)Vaccine production and research at Rosia and SienaLivorno or La SpeziaPurified water, WFI loops, process tanks, sanitary piping
Emilia-Romagna (Parma, Reggio Emilia, Modena)Dairy and food processing, including the Parmigiano Reggiano area, and GSK at San Polo di TorrileLa Spezia or GenoaSanitary tanks, CIP systems, heat exchangers, process piping
Friuli Venezia Giulia and the north-eastManufacturing plants served through the AdriaticTriestePressure vessels, utility skids, piping modules

Chemical companies in Italy and the food industry in Italy: what they buy

Chemical companies in Italy make the country Europe’s third-biggest chemical producer after Germany and France, with production concentrated in the north, where about 77.6 percent of the sector’s employment sits. Lombardy alone hosts some 1,700 chemical companies. Those plants buy pressure vessels, reactors, heat exchangers, dosing skids and alloy piping, often to the operator’s own corporate engineering standards, and Paul Industries builds to those standards as readily as to EN 13445 or ASME Section VIII.

The food industry in Italy depends on hygienic process equipment of a different kind. Dairies in the Parmigiano Reggiano area of Parma, Reggio Emilia and Modena, and food and beverage plants across the Po valley, run milk reception, pasteurisation, cheese vat feed, brine and CIP systems where drainability, surface finish and cleaning validation decide product safety. Paul Industries builds sanitary tanks, transfer skids and CIP systems for dairy processors and food and beverage plants with orbital welds, documented finishes and spray coverage tests, wired for Italian power and documented in Italian.

How do DM 329/2004 and INAIL verifications apply to US-built pressure equipment?

DM 329/2004 is the Italian ministerial decree that governs how pressure equipment is put into service and kept in service, and it applies to a US-built vessel or skid in exactly the way it applies to one made in Italy. The decree sits on top of the PED, which Italy implements through Legislative Decree 93/2000 as amended by Legislative Decree 26/2016, in force since July 19, 2016.

The sequence for a new item has four parts. First, the equipment reaches Italy with its CE marking, declaration of conformity and the instructions and safety information required by Annex I, points 3.3 and 3.4, which Legislative Decree 93/2000 requires in Italian. Second, the user requests the commissioning verification, the verifica di messa in servizio, from INAIL before start-up, unless the item falls into one of the exclusions in article 5 of the decree. Third, the user sends the commissioning declaration under article 6 to INAIL and the ASL health authority; since the 2011 reform the commissioning notice entered in INAIL’s database serves as that declaration. Fourth, periodic verifications follow under the decree of April 11, 2011 and Annex VII of Legislative Decree 81/2008: INAIL carries out the first periodic verification, and the ASL, ARPA or an authorised inspection body carries out later ones, at intervals set by fluid, category and volume. Requests run through INAIL’s CIVA online platform.

From CE marking to periodic verification: Italian checkpoints for a pressure vessel
CheckpointLegal basisWho checksWhat Paul Industries delivers for it
Placing on the marketPED 2014/68/EU through D.Lgs. 93/2000 and D.Lgs. 26/2016Conformity module set by the PED categoryCategory assessment, CE marking, declaration of conformity, Italian instructions
Commissioning verificationDM 329/2004, article 4INAILInstallation drawings, safety accessory data, PED file ready for the inspector
Commissioning declarationDM 329/2004, article 6, and the 2011 database noticeINAIL and the ASLEquipment data sheets and the technical information the declaration lists
First periodic verificationDM 11 April 2011 and D.Lgs. 81/2008 Annex VIIINAILInspection access, nameplate data, design and test records
Later periodic verificationsD.Lgs. 81/2008 Annex VII intervalsASL, ARPA or an authorised inspection bodyMaintenance and inspection plan in the Italian manual

For the plant, the practical point is that the Italian checkpoints rely on records the builder creates. A vessel that arrives with a clean conformity file, a clear safety accessory list and an Italian instruction manual passes through its INAIL verification smoothly. Paul Industries prepares that package as part of the equipment, and attends the commissioning verification during start-up when the plant asks. Skids with pumps or agitators also carry the machinery declaration, under the Machinery Directive until the EU Machinery Regulation 2023/1230 applies on January 20, 2027, and equipment for classified zones carries ATEX-rated components.

Safety accessories deserve their own attention on an Italian order. The PED places relief valves, bursting discs and similar devices that protect equipment against exceeding its allowable limits in category IV, the top category, and INAIL’s commissioning verification checks that each protected item has the right device, correctly set and documented. Paul Industries sizes every relief device against the worst credible scenario in the design basis, records set pressures and capacities on a single safety accessory schedule, and ships the devices with their own conformity documents, so the Italian inspector ticks off the list in one pass.

What is the voltage in Italy, and how is a skid wired for it?

The voltage in Italy is 400 V between the three phases and 230 V from phase to neutral, at a frequency of 50 Hz, matching the IEC 60038 European values, so a process skid for an Italian plant is designed for a 400 V, 50 Hz supply from its first electrical drawing. Anyone asking what is the electricity voltage in Italy for a factory gets the same answer as for a household, because industrial users simply take the three-phase level.

Two Italian standards shape the electrical work. CEI 64-8, the national standard for user electrical installations up to 1,000 V AC and 1,500 V DC, governs the wiring that connects the skid inside the plant, and new parts published in 2024 have applied since November 1, 2024. CEI EN 60204-1 governs the electrical equipment of the machine itself: the control panel, emergency stop circuits, protective bonding and wiring colours. Paul Industries designs to both and to the plant’s own electrical specification, and supplies the panel test records and schematics that the Italian site’s electrical team expects.

Voltage in Italy vs US equipment: frequency is the real change

The electrical voltage in Italy differs from US industrial voltages, but the frequency matters more to a mechanical design. A motor wound for 60 Hz turns about one sixth slower on 50 Hz, so a four-pole motor drops from about 1,800 to about 1,500 rpm, and the affinity laws then cut a centrifugal pump’s flow to about 83 percent and its head to roughly 69 percent of the 60 Hz rating. Comparing voltage in Italy vs US practice, Paul Industries selects every motor, pump and compressor on its 50 Hz curve, adds variable frequency drives where the duty calls for them, and specifies 230 V, 50 Hz instruments and control power so nothing on the skid depends on a converter.

What does AIFA GMP inspection expect from a new process system?

AIFA GMP inspection, carried out by the Italian Medicines Agency, assesses Italian manufacturing against the EU GMP Guide, and Italy has belonged to the PIC Scheme since February 2000, after joining the original PIC convention in August 1990. For sterile and vaccine production, the revised Annex 1, in force since August 25, 2023, requires a contamination control strategy that reaches back into how water systems, clean steam generators and process vessels are designed.

An AIFA inspector reviewing a new WFI loop or formulation skid looks for a traceable design and a qualified installation: material certificates for every product-contact part, surface finish and passivation records, weld logs with borescope evidence, slope and dead-leg checks, validated sanitisation, and controls with secure audit trails. Paul Industries builds that evidence alongside the equipment and executes installation and operational qualification at the Italian site, supplying the data the plant needs for performance qualification. Italian pharmaceutical plants exporting to the United States receive the same file arranged for FDA review, and the validation and commissioning documents are issued in Italian and English.

Documents in Italian, drawings in metric

Italian plant documentation is delivered in Italian from the first draft of the manual, rather than translated at the end, because operators, maintenance planners and INAIL inspectors all read it. Drawings use metric dimensions and DN pipe sizes, P&IDs follow the plant’s tagging convention, and instrument data sheets list ranges in bar, degrees Celsius and cubic metres per hour. Where an Italian group keeps its engineering records in English for a US parent, Paul Industries issues both versions with matching revision numbers, so a change made on one drawing set is never missing from the other.

Shipping to Italy from USA ports: Genoa, La Spezia, Livorno and Trieste

Shipping to Italy from USA East Coast ports for process equipment means a Mediterranean container or project cargo service to one of four main gateways: Genoa and La Spezia for Lombardy, Piedmont and Emilia-Romagna, Livorno for Tuscany and Lazio, and Trieste for the north-east. Forwarders quote sea shipping to Italy from New York at about 18 to 25 days port to port, depending on the service and its calls, before port handling and the inland leg.

The Genoa port and its neighbour La Spezia sit a short road haul from the Po valley’s industrial belt, which makes them the natural entry for most chemical and food projects. Heavy vessels and tall modules move inland on escorted road transport, so Paul Industries fixes widths, heights and lifting points during design and splits larger systems into flanged modules. Skids that fit a high cube container ship through its 2.34 metre door; larger units ship on flat racks. Crates use ISPM 15 heat-treated wood, and polished stainless equipment is dried, capped and preserved with nitrogen or desiccant for the crossing.

Italian gateways for process equipment from the US East Coast
PortPlants it serves bestPoints for a process skid
GenoaLombardy, Piedmont, LiguriaShort haul to Milan’s chemical and pharmaceutical belt; frequent transatlantic calls
La SpeziaEmilia-Romagna, eastern Lombardy, northern TuscanyDirect road access to the Parma and Modena food district
LivornoTuscany, northern LazioNatural entry for Siena and Florence sites; ro-ro and project cargo handling
NaplesCampania, southern LazioOption for plants south of Rome
TriesteFriuli Venezia Giulia, VenetoAdriatic gateway for north-east manufacturing

Customs duty and VAT on equipment entering Italy

US-origin industrial goods enter Italy at zero customs duty under Regulation (EU) 2026/1455, effective from July 1, 2026 to December 31, 2029. Import VAT at the Italian standard rate of 22 percent is charged at clearance on the customs value, and a VAT-registered Italian plant recovers it through its normal VAT returns. A DAP order leaves the plant as importer of record, while a DDP order from Paul Industries carries a landed price with clearance and VAT included.

Steps of an Italian project with Paul Industries

An Italian project with Paul Industries follows nine steps under a single contract, and the early steps settle every Italian requirement before metal is cut: PED category, DM 329/2004 checkpoints, ATEX zones, CEI standards, the Italian document set and the port of entry. The table shows each step and what the plant holds at its end.

How an Italian process equipment project runs
StepItalian requirements settledPlant receives
1. Specification reviewDesign code (EN 13445, ASME or company standard), PED category, INAIL commissioning need, ATEX zonesRequirements matrix and code basis
2. DesignMetric and DN drawings, 400 V 50 Hz design to CEI EN 60204-1, Ph. Eur. water grades, Italian HMI textP&IDs, general arrangements, calculations
3. BuildMaterials with PED certification, qualified welding, hygienic finishesMill certificates, weld and NDT records, finish data
4. FATItalian engineers present or connected by video; 50 Hz testing where specifiedApproved FAT protocol and closed punch items
5. ShipmentISPM 15 crates, booking to Genoa, La Spezia, Livorno or TriesteCommercial invoice, packing list, bill of lading
6. Site workInstallation or installation supervision under the plant’s safety planInstallation records and tie-in checks
7. INAIL verification and start-upVerifica di messa in servizio where required, commissioning declaration dataStart-up report, verification records
8. QualificationSite acceptance test, IQ and OQ under EU GMPExecuted protocols, PQ support data
9. TurnoverItalian manuals, training, periodic verification planAs-built dossier and spare parts list

Who builds process systems for plants in Italy?

Paul Industries builds process systems for plants in Italy, from a single dosing skid or pressure vessel to a complete WFI, clean steam, CIP, tank and piping package, and stays with each one through the Italian port, the INAIL commissioning verification, start-up and qualification. The plant deals with one firm that designed, built, tested and commissioned the equipment, so every question about a weld, a test result or a control setting reaches the people who made it. Paul works the same way for plants in neighbouring markets, described on the France and Switzerland pages.

How much does an Italian process equipment project cost, and what drives it?

An Italian process equipment project costs the price of the equipment plus six delivery items: ocean freight and the inland haul, crating and preservation, PED and DM 329/2004 documentation, the electrical and ATEX scope, Italian-language documentation, and the installation route. Paul Industries quotes each item separately so the plant compares like with like.

Freight depends first on whether a skid fits a container or needs a flat rack, and then on the port and the road leg to the plant. Preservation protects polished surfaces for a crossing of three weeks or more. Documentation effort grows with the PED category and with the number of items needing an INAIL verification. ATEX-rated components and panels built to CEI EN 60204-1 change component cost. Italian manuals and HMI text are prepared for every system. An installation supervision scope uses fewer Paul field hours than full installation, while start-up and qualification stay with Paul in both cases. Duty is zero for US-origin industrial goods, and import VAT is recovered by the plant. Offers are in US dollars, as a budget figure from comparable scope first and a firm price once design basis, site and Incoterm are fixed.

Paul Industries for Italian pharmaceutical, chemical and food plants

Paul Industries, formerly based in northern New Jersey, then Pennsylvania, and now headquartered on Shore Drive in Kilmarnock, Virginia, takes complete process systems to plants all over Italy, from Lombardy and Emilia-Romagna to Tuscany, Lazio and the north-east. It engineers the system, builds the skids, vessels, tanks and spools in the United States, runs a witnessed factory acceptance test, ships the equipment to the Italian gateway nearest the plant, and installs, starts up, commissions and qualifies it on site or supervises the installation, depending on the project. Each system arrives built to the PED as applied by Legislative Decree 93/2000, ready for its DM 329/2004 verification, wired to CEI standards and qualified to EU GMP where medicines are made, with Italian manuals, weld records and as-built drawings in the dossier. Send the process specification, the plant’s address and the Incoterm you prefer to request a quote.

Standards referenced: EU Pressure Equipment Directive 2014/68/EU · D.Lgs. 93/2000 as amended by D.Lgs. 26/2016 · DM 329/2004 · DM 11 aprile 2011 · D.Lgs. 81/2008, Annex VII · EU Machinery Directive 2006/42/EC · EU Machinery Regulation 2023/1230 · ATEX Directive 2014/34/EU · CEI 64-8 · CEI EN 60204-1 · EU GMP Guide (EudraLex Volume 4) and Annex 1 · PIC/S GMP Guide · European Pharmacopoeia · EN 13445 · ASME Boiler and Pressure Vessel Code Section VIII · ASME BPE · Regulation (EU) 2026/1455 · Incoterms 2020 · ISPM 15

Frequently asked questions

Which pharmaceutical companies in Italy run vaccine and sterile production?

Vaccine and sterile production in Italy includes GSK’s plants at Rosia near Siena and at San Polo di Torrile near Parma, with Siena and Rosia together producing roughly 60 million vaccine doses a year, alongside many Italian and multinational groups in Lazio and Lombardy. Paul Industries builds WFI, clean steam and CIP systems for plants of this type in the United States and qualifies them at the Italian site to EU GMP.

Who requests the INAIL commissioning verification under DM 329/2004?

The plant, as user of the equipment, requests the commissioning verification from INAIL before start-up, unless the item is excluded under article 5 of DM 329/2004. Paul Industries prepares the conformity file, installation drawings and safety accessory data the inspector reviews, and attends the verification during start-up when the plant asks, so the request goes in complete.

How are periodic verifications of pressure equipment organised in Italy?

Periodic verifications in Italy follow the decree of April 11, 2011 and Annex VII of Legislative Decree 81/2008, with intervals set by the fluid, the PED category and the volume. INAIL carries out the first periodic verification, and later ones fall to the ASL, ARPA or an authorised inspection body, with requests made on INAIL’s CIVA platform. Paul Industries designs inspection access and supplies the records those visits use.

Must PED instructions be in Italian for equipment used in Italy?

Instructions and safety information for pressure equipment made available in Italy must be in Italian under Legislative Decree 93/2000, which implements the PED. Paul Industries supplies operating and maintenance manuals, safety information and nameplate text in Italian, with HMI alarms translated and English kept alongside for engineering reference, so the plant’s operators and INAIL inspectors read the same documents.

Who builds sanitary process systems for dairies in Emilia-Romagna?

Paul Industries builds sanitary process systems for dairies in Emilia-Romagna, including milk reception and storage tanks, pasteuriser feed and transfer skids, brine systems and CIP stations for plants around Parma, Reggio Emilia and Modena. Each system has orbital-welded hygienic piping, documented surface finishes and spray coverage tests, a 400 V, 50 Hz electrical design and Italian documentation, and is installed and commissioned at the dairy.

Which Italian port suits a skid bound for a plant near Milan?

Genoa is usually the first choice of port for a skid bound for a plant near Milan, with La Spezia as the alternative, since both sit a short road haul from Lombardy. Oversize modules move inland under escort, so Paul Industries fixes dimensions and lifting points during design, picks the port with the plant’s logistics team, and books the sailing once crate sizes are final.

What transit time should an Italian plant plan for sea shipping to Italy from New York?

Sea shipping to Italy from New York takes about 18 to 25 days port to port according to forwarder averages, depending on the service, its calls and the Italian port. Customs clearance and the road leg add a few days. Paul Industries schedules the factory acceptance test around a confirmed sailing and builds preservation for a crossing of that length into the crating plan.

What import charges apply when US equipment clears customs in Italy?

US-origin industrial equipment clears Italian customs at zero duty under Regulation (EU) 2026/1455, which runs from July 1, 2026 to the end of 2029. Import VAT at the 22 percent standard rate is charged at clearance on the customs value and recovered by a VAT-registered plant through its returns. Paul Industries quotes DAP or DDP so the plant knows exactly which charges it carries.

What is CEI 64-8, and how does it affect the field wiring of a new skid?

CEI 64-8 is Italy’s standard for user electrical installations up to 1,000 V AC, and it governs the cables, protection and earthing that connect a new skid inside an Italian plant. The skid’s own control panel follows CEI EN 60204-1. Paul Industries designs both to the plant’s electrical specification and hands over the schematics and test records the site team needs.

Voltage in Italy vs US: which parts of an American skid change?

Motors, pumps, fans, compressors, control transformers and instruments change when a skid is built for Italy, because the supply is 400 V three phase at 50 Hz rather than US industrial voltages at 60 Hz. Paul Industries selects each rotating item on its 50 Hz curve, adds variable frequency drives where the duty needs them, and specifies 230 V, 50 Hz control components throughout.

Can chemical companies in Italy order equipment to their own engineering standards?

Chemical companies in Italy order equipment from Paul Industries to their own corporate engineering standards, with EN 13445 or ASME Section VIII as the design code underneath and the PED conformity route on top. Paul follows the operator’s material, weld procedure, testing and documentation rules, so the new vessel or skid matches the rest of the plant’s equipment register.

What does an AIFA inspector check on a new WFI loop?

An AIFA inspector checking a new WFI loop looks at traceable product-contact materials, surface finish and passivation records, weld logs with borescope evidence, slope and dead-leg verification, the sanitisation method and its validation, and the audit trail on the controls. Paul Industries builds that record as the loop is made and executes IQ and OQ at the Italian site.

What do biotech companies in Italy need when they scale up to commercial production?

Biotech companies in Italy scaling up to commercial production usually add a WFI still or membrane system with its loop, a clean steam generator, buffer and media hold tanks, CIP stations and qualified bioprocess piping. Paul Industries designs those systems for commercial batch sizes, fabricates and FAT-tests them in the United States, then qualifies them on site at plants in Milan, Rome, Siena or Naples.

Who installs process equipment at pharmaceutical plants around Latina and Rome?

Paul Industries installs, starts up and commissions process equipment at pharmaceutical plants around Latina, Aprilia and Rome, or supervises the installation, depending on the project. The work follows the site’s safety plan and permit system, and closes with site acceptance testing, installation and operational qualification, Italian training and handover of the full dossier.

Can an Italian engineering team attend the FAT in the United States?

An Italian engineering team attends the factory acceptance test in person in the United States or follows it live by video, with the protocol, results and punch list shared as the test runs. Paul Industries agrees the FAT protocol during design, tests pressure, functions, alarms and controls against it, and closes every punch item before the equipment is crated.

How is an Italian order priced, and in which currency?

Paul Industries prices Italian orders in US dollars, starting with a budget figure from comparable scope and moving to a firm price once the design basis, site, port and Incoterm are fixed. Freight, crating, PED and DM 329/2004 documentation, Italian deliverables and the installation route appear as separate lines, which keeps the comparison with the plant’s budget transparent.

What does shipping to Italy from USA ports cost for an oversize module?

Shipping an oversize module to Italy from USA ports costs more than a container load because it needs a flat rack or project cargo space, special lifting and an escorted road leg from Genoa, La Spezia or Livorno. Paul Industries keeps that cost down by designing modules to the widest and tallest envelope the route accepts without escorts, and quotes freight as its own line.

Planning a process system for a plant in Italy?

Send your process specification, design code, plant location and preferred Incoterm, and Paul Industries will return the PED and DM 329/2004 route, an Italian document list and a firm offer in US dollars. Call 201-450-8280 or request a quote.