Paul Industries is a US process equipment contractor for Kenya that designs, fabricates, factory tests, ships and commissions boilers and steam systems, purified water and WFI plants, CIP and pasteurizer skids, cooling systems and process piping for tea factories, dairies, breweries, cement works, geothermal stations and medicine makers across Kenya. Every system is wired for the 415/240 V, 50 Hz Kenya Power supply, documented for the Occupational Safety and Health Act and the Pharmacy and Poisons Board where they apply, landed at the Port of Mombasa, and installed and started up by Paul or installed under Paul’s supervision. Paul Industries is headquartered at 256 Shore Drive, Kilmarnock, Virginia, and was formerly based in northern New Jersey, then Pennsylvania.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Boiler examination Approved person, at least every 12 months (OSH Act 2007)
Supply 415/240 V, 50 Hz (Kenya Power)
Seaport Port of Mombasa
Import VAT 16 percent on CIF plus duty and levies
Reviewed November 2026

What does a US process equipment contractor for Kenya build for Kenyan plants?

A US process equipment contractor for Kenya engineers a complete process or utility system in the United States, proves it on a test floor, packs it for an ocean voyage of five weeks or more, and then sets it to work at a site in Nairobi, Mombasa, the Rift Valley or the tea highlands. Paul Industries delivers ASME pressure vessels and steam receivers, steam and condensate piping, purified water and WFI systems, CIP and SIP skids, pump and dosing skids, process cooling and chilled water plants, and the stainless and carbon steel piping that connects them.

Kenyan buyers pick one of three contract routes. Supply of factory-tested equipment with Paul supervising installation suits an owner who already runs site works. Design-build extends Paul’s scope to the plant room, interconnecting pipework, controls and the inspection file the owner keeps. Turnkey delivery places the whole system, from process design to commissioning records, under a single Paul contract, a single schedule and a single price in US dollars. Drawings use SI units, documents are written in English, and every tag number, nameplate and manual matches the plant’s own numbering system. Kenya appears in the Africa group on Paul’s international projects page, alongside every other country Paul takes work in.

Kenya’s process industries: tea, dairy, brewing, cement, geothermal power and medicines

Kenya’s process plants cluster around agriculture, building materials, power and health products, and each cluster buys a different mix of steam, water and cooling equipment. The table pairs the main clusters with the regions where they operate and the systems Paul supplies to them; the facilities named are market facts about Kenya.

Process clusters in Kenya and the systems they buy
ClusterWhere it operatesMarket factSystems Paul delivers
Tea manufactureKericho, Nandi, Nyeri, Murang’a, Kisii and the slopes of Mount KenyaThe Kenya Tea Development Agency lists 69 factories owned by smallholder farmersBiomass and fuel oil boiler feed systems, hot air and steam distribution, condensate return, water treatment
DairyNairobi, Nakuru, Eldoret, Nyeri and central KenyaMilk processors run pasteurizers, UHT lines and powder plantsHTST and CIP skids, glycol and chilled water plants, sanitary piping
Brewing and beveragesRuaraka in Nairobi, KisumuKenya Breweries has brewed at Ruaraka since 1922Brewhouse steam, deaerated water, CO2 and glycol systems, effluent treatment
CementMombasa, with a clinker plant planned in KwaleBamburi Cement runs an integrated cement plant at MombasaCompressed air, dust collection, cooling water and lubrication skids
Geothermal powerOlkaria in the Naivasha areaKenGen reports 799 MW of geothermal capacity including the Olkaria plantsCooling water treatment, pumps and skids, steam and brine piping, pressure vessels
MedicinesNairobi and surrounding countiesA 2026 report counted 31 operating drug makers and 10 more building plantsPurified water, WFI, clean steam, cleanroom HVAC utilities, process skids

Tea factories in Kenya burn wood, briquettes or fuel oil to raise steam and hot air for withering and drying, so feedwater treatment and condensate recovery decide how much fuel each kilogram of made tea consumes. Dairy and brewing plants around Nairobi lean on sanitary dairy systems and brewery utilities such as clean-in-place, chilled glycol and deaerated water. At the Olkaria geothermal power station complex, high-silica brine and steam condensate drive demand for corrosion-resistant piping, cooling water chemistry and pump packages, the kind of balance-of-plant equipment covered on Paul’s power generation page.

Pharmaceutical companies in Kenya and Pharmacy and Poisons Board GMP

Pharmaceutical companies in Kenya operate under licences from the Pharmacy and Poisons Board, which inspects a site for Good Manufacturing Practice before it issues a manufacturing licence and again during the life of that licence. The Kenya pharmaceutical industry is growing: an April 2026 report counted 31 pharmaceutical manufacturers in Kenya already producing and ten new entrants building facilities, part of a national push to make more essential medicines at home. Each new plant needs a water system, a steam system and controlled process utilities that hold up under inspection.

For these plants Paul builds purified water generation with storage and a sanitized distribution loop, WFI stills, clean steam generators, and tablet and liquid process skids in electropolished stainless steel to ASME BPE. Each package arrives with design specifications, material certificates, weld maps, passivation and slope records, and executed installation and operational qualification protocols in English, so the plant’s quality unit has a complete file for the Board’s GMP inspectors. Paul’s pharmaceutical systems page describes the same water and steam scope for plants worldwide.

Which Kenyan rules apply to boilers, steam receivers and air receivers?

Kenya’s Occupational Safety and Health Act 2007 sets the rules for steam boilers, steam receivers and air receivers in workplaces, and the Directorate of Occupational Safety and Health Services administers them. Section 67 requires every steam boiler to carry a safety valve that no stop valve can isolate and a steam pressure gauge the attendant can read, and it requires examination by an approved person, meaning someone the Director approves in writing, at least once in every twelve months and after any modification or extensive repair. Section 68 sets a 24 month examination cycle for steam receivers, and section 69 sets the same cycle for air receivers, which must also be marked with their safe working pressure.

Kenyan requirements for pressure plant and what arrives with Paul equipment
EquipmentRequirement under the OSH Act 2007What Paul delivers with it
Steam boilerNon-isolatable safety valve, steam pressure gauge, water gauge; examination at least every 12 months, cold and under steamASME Section I design, manufacturer’s test certificate, valve and gauge data, hydrostatic test record
New boiler before first useManufacturer’s certificate of test for the examiner’s fileData report, material certificates and the signed shop test record in one dossier
Steam receiver or steam containerThorough examination every 24 months or after repairsASME Section VIII vessel, relief valve sizing, nameplate with maximum allowable working pressure
Air receiverSafe working pressure marked, safety valve, correct pressure gauge, cleaning and examination every 24 monthsMarked receiver, set and tagged relief valve, drain and inspection openings sized for cleaning
Process pipingWorkplace safety duties under the same ActASME B31.3 design, weld records, radiography or other NDE results, pressure test report

The examiner’s report must be signed within 28 days of the examination and entered in the general register, and a defect that makes a boiler imminently dangerous goes to the area occupational safety officer within 24 hours. Paul builds each boiler and vessel so that its documents answer the examiner’s questions on the first visit: design pressure and temperature, material grades, weld procedures, test pressures and relief settings, all in one bound and electronic file. Paul’s commissioning and validation work adds the start-up records the examiner and the plant both keep.

Kenya voltage levels and electrical design for 50 Hz plants

Kenya voltage levels for low-voltage industrial supply are 415 V between phases and 240 V phase to neutral at 50 Hz, on a TN-C-S earthing arrangement in Kenya Power’s design criteria, and commercial and industrial customers are metered at 415 V three phase. Larger plants take medium-voltage supply and step it down on site. A skid designed for the US 480 V, 60 Hz grid therefore needs a different motor, drive and control design before it ships to Kenya.

Frequency matters as much as voltage. A centrifugal pump running at 50 Hz turns about 17 percent slower than at 60 Hz, which by the affinity laws cuts its flow to about 83 percent, its head to about 69 percent and its absorbed power to about 58 percent of the 60 Hz values. Paul selects pumps, fans and compressors at their 50 Hz curves, specifies IEC frame motors rated for 415 V, and builds control panels to IEC 60204-1 with 240 V or 24 V DC control circuits. A Kenya voltage converter from a retail shelf suits a laptop charger; a 75 kW pump skid needs equipment chosen for the Kenya voltage from the start, and that is how Paul engineers it.

Supply quality shapes the panel design too. Kenya Power’s low-voltage criteria allow the supply to sit between 15 percent below and 10 percent above nominal, and many plants switch to standby diesel generators during outages. Paul specifies drives with ride-through for short dips, under-voltage and phase-loss protection, and restart logic that brings pumps and heaters back in a safe sequence after a transfer from the grid to a generator and back again.

Electrical installation work in Kenya falls under Part VI of the Energy Act 2019, administered by the Energy and Petroleum Regulatory Authority, which governs who carries out and supervises installation work and the certificates involved. Paul supplies wiring diagrams, cable schedules, protective device settings and insulation and earth test results with every panel, so the installation record for the plant’s supply connection is complete when Paul’s electrical work on the skid is finished.

KEBS standards and PVoC for imported process equipment

KEBS standards apply to imported goods through the Kenya Bureau of Standards Pre-Export Verification of Conformity programme, which requires regulated products to carry a certificate of conformity issued before shipment. The current Kenya Bureau of Standards PVoC manual is Version 15, published in 2026, and it describes the inspection, testing and document checks behind each certificate. KEBS also publishes exemption criteria for machinery and industrial spares imported by registered manufacturers for their own use, which rest on the importer’s registration, its quality record and confirmation of the invoice and warranty.

The product and the importer decide whether a shipment needs a certificate of conformity or qualifies for an exemption, and Paul settles that question with the Kenyan buyer during engineering, well before the equipment reaches the quay. Paul supplies the test reports, material certificates, drawings, nameplate data and packing lists the verification body reviews, and it schedules the pre-shipment inspection to follow the factory acceptance test so the inspector sees the equipment complete and running.

Shipping to Kenya from USA through the Port of Mombasa, Kenya

Shipping to Kenya from USA for a process system means an ocean voyage from an East Coast port such as New York, Philadelphia, Norfolk or Savannah to the Port of Mombasa, Kenya, on the Indian Ocean coast. Published freight-route data puts container shipping to Kenya from USA East Coast ports at roughly 37 to 54 days port to port, depending on the line and its transshipment hub, before customs clearance and the inland leg.

Most skids ship in 40-foot high cube containers, which take a load of about 12 m long, 2.35 m wide and 2.69 m high inside the door frame. Wider or taller modules go on flat racks or as breakbulk, and Paul splits large systems into shipping modules early in design so each piece fits a container or a flat rack and reassembles at site with bolted or pre-prepared welded joints. Crates use ISPM 15 heat-treated timber with the treatment mark, desiccant and vapor barrier for a tropical voyage, and stainless pipe ends are capped and purged.

From the Port of Mombasa, equipment for Nairobi, Athi River or the Rift Valley moves inland by road or rail, and oversize loads need route surveys for bridges and town crossings. Paul plans the module sizes, lifting points and transport frames around the route to the actual site.

Cargo insurance is written on the CIF value plus a margin, with Incoterms 2020 setting a minimum of 110 percent of the contract price for CIF and CIP sales, and Paul names the cover amount, the policy terms and the claims contact in the shipping documents. Each container is sealed after the last crate is braced, the seal number goes onto the bill of lading, and photographs of the stow go with the document set so any damage found at Mombasa is traced to the leg where it happened.

Entry charges on process equipment landed in Kenya
ChargeBasisRate or rule
Import dutyCustoms value by tariff lineEAC Common External Tariff bands of 0, 10, 25 and 35 percent
Import Declaration FeeCustoms value2.5 percent under the Miscellaneous Fees and Levies Act as amended
Railway Development LevyCustoms value2 percent
Value added taxCIF value plus duty and the other import charges16 percent standard rate
ConformityRegulated productsKEBS PVoC certificate of conformity or an approved exemption

The Kenya VAT rate for imports is the 16 percent standard rate, and the Kenya VAT rate 2026 figure is unchanged from earlier years. Import VAT is levied on the sum of the CIF value, duty and other taxes, so it applies on top of the levies in the table. Who pays these charges depends on the Incoterm: under FCA or FOB a US port, CIF Mombasa or CFR, the Kenyan buyer clears and pays them; under DAP Paul delivers to the site and the buyer clears customs; under DDP Paul’s price includes them.

How does a Kenyan project with Paul Industries run?

A Kenyan project with Paul Industries runs through nine stages, from a written process duty to a running system with its records handed over, and the inspection file for boilers and receivers is assembled during engineering. The table sets out what Paul does at each stage and what the Kenyan plant keeps.

Stages of a process equipment project for a plant in Kenya
StagePaul Industries’ workWhat the Kenyan plant receives
1. Duty and site surveyProcess duty, 415/240 V supply data, altitude and ambient design conditions, water analysis, fuelAgreed design basis in English
2. EngineeringProcess and mechanical design to ASME and IEC practice at 50 HzP&IDs, general arrangements, calculations and data sheets for review
3. Code and import fileBoiler and vessel design packages, PVoC documents, tariff classification supportExaminer-ready file and conformity documents
4. FabricationWelding, NDE, passivation, panel build in the United StatesMaterial certificates, weld maps, NDE reports
5. Factory acceptance testHydrostatic and functional tests, witnessed by the buyer in person or by videoSigned FAT report and punch list
6. Export and voyageISPM 15 crating, booking to Mombasa, export filingsCommercial invoice, packing list, bill of lading, certificate of origin
7. InstallationPaul sets, pipes and wires the system, or supervises that workInstallation checklists and redlined drawings
8. Start-up and commissioningCommissioning, first examination support, IQ and OQ for GMP systemsCommissioning sheets and executed protocols
9. Handover and serviceOperator training, spare parts, maintenance planManuals and as-built dossier

Altitude is part of the design basis for central Kenya: Nairobi lies between about 1,600 and 1,900 m above sea level, where thinner air reduces the cooling of air-cooled condensers, motors and panels, so Paul derates and sizes that equipment for the site elevation. After handover Paul keeps the system in service with spare parts, resin and membrane changes, relief valve testing and support for each statutory examination.

Commissioning spares and long supply lines

Commissioning spares for a Kenyan plant ship with the equipment, because a replacement seal, gasket set or sensor sent from the United States after start-up spends weeks in transit. Paul packs a commissioning kit with seals, gaskets, fuses, filter elements and instrument spares, and recommends a two-year operating spares list priced in the same proposal, so the plant holds the parts that wear before the first shutdown arrives. Critical items such as pump mechanical seals and relief valves are listed with their make, model and drawing reference for reordering.

Who builds process systems for plants in Kenya?

Paul Industries builds process systems for plants in Kenya: boiler feed and condensate systems for tea factories in Kericho and around Mount Kenya, pasteurizer, CIP and glycol skids for dairies, brewhouse utilities for Nairobi and Kisumu breweries, compressed air and dust collection for cement works at Mombasa, cooling water and pump packages for geothermal plants at Olkaria, and purified water, WFI and clean steam systems for medicine makers. Each system is designed for 415 V at 50 Hz, documented for the Occupational Safety and Health Act and, for medicines, the Pharmacy and Poisons Board, and installed and commissioned by Paul or installed under Paul’s supervision. Buyers comparing other markets in the region and beyond can read Paul’s pages for the United Arab Emirates and India.

What drives the cost of a process system delivered to Kenya?

Seven cost drivers on top of the equipment itself set the delivered price of a process system for a Kenyan plant, and Paul prices each as a separate line in a US dollar proposal so the buyer sees where the money goes.

  • 50 Hz and 415 V design. Reselected pumps and fans, IEC motors, drives and panels for the Kenyan supply.
  • Altitude and climate. Derated air-cooled equipment for highland sites and tropical protection for coastal ones.
  • Code and conformity documents. Boiler and vessel files for the approved person, PVoC documents and GMP qualification protocols.
  • Materials. Electropolished 316L for medicines and dairy, duplex or alloy steel for geothermal brine.
  • Freight. Five to eight weeks at sea, flat racks for oversize modules, port handling and the inland leg from Mombasa.
  • Entry charges. Duty by tariff line, the 2.5 percent declaration fee, the 2 percent railway levy and 16 percent VAT, borne according to the Incoterm.
  • Site route. Full installation and commissioning by Paul compared with installation under Paul’s supervision.

Paul Industries for Kenyan tea, dairy, brewing, cement, geothermal and pharmaceutical plants

Paul Industries engineers, fabricates and tests steam, water, cooling and process systems in the United States for plants across Kenya, ships them through Mombasa, and installs and commissions them or supervises their installation, with boiler, electrical and GMP records in English. Send the process duty, site location and altitude, supply details and target start-up, and Paul returns a US dollar price, a document plan and a fabrication and shipping schedule. Request a quote for a plant in Kenya.

Standards referenced: Occupational Safety and Health Act 2007 (Kenya), sections 67 to 69 · Energy Act 2019 (Kenya), Part VI electrical installation work · KEBS Pre-Export Verification of Conformity (PVoC) Manual · EAC Common External Tariff · ASME Boiler and Pressure Vessel Code Section I and Section VIII · ASME B31.3 · ASME BPE · IEC 60204-1 · Incoterms 2020 · ISPM 15

Frequently asked questions

What Kenya voltage levels does a US-built control panel need?

A panel for a Kenyan plant takes a 415 V three-phase supply at 50 Hz, with 240 V available phase to neutral, and Kenya Power’s design tolerance runs from minus 15 to plus 10 percent. Paul builds the panel with IEC motor starters and drives rated for 415 V, a control transformer or 24 V DC supply for the controls, and surge protection sized for the site. The panel ships with wiring diagrams, settings and test results for the plant’s electrical file.

Can a 60 Hz American pump run on the Kenya voltage and frequency?

A 60 Hz pump on a 50 Hz Kenyan supply turns about 17 percent slower, delivering roughly 83 percent of its rated flow and 69 percent of its head, and its motor sees a different voltage. Paul avoids that mismatch by selecting every pump, fan and compressor at its 50 Hz curve and fitting IEC motors wound for 415 V, so the skid meets its duty on the day it starts at the Kenyan site.

How often must a steam boiler be examined in Kenya?

Section 67 of the Occupational Safety and Health Act 2007 requires a steam boiler to be examined by an approved person at least once in every twelve months, and after any modification or extensive repair. The examiner may extend the interval to fifteen months in writing. Paul supplies the design data, test certificate and valve settings the approved person reviews, and supports the first examination during commissioning at the plant.

What does the examiner need for a new air receiver at a plant in Nairobi?

An air receiver in Nairobi or anywhere in Kenya must show its safe working pressure, carry a safety valve that lifts once that pressure is exceeded, and have a correct pressure gauge, and it is cleaned and examined at least every 24 months. Paul delivers the receiver with its nameplate, tagged relief valve, gauge, drain and inspection openings, plus the design and hydrostatic test records the approved person files.

Who supplies water systems to pharmaceutical manufacturers in Kenya?

Paul Industries supplies purified water, WFI and clean steam systems to pharmaceutical manufacturers in Kenya, built in electropolished stainless steel to ASME BPE and documented with design specifications, weld records and executed IQ and OQ protocols. The file supports the Good Manufacturing Practice inspections the Pharmacy and Poisons Board carries out at licensing and during the licence term. Paul installs and commissions the system or supervises its installation.

Which KEBS standards apply to a skid imported into Kenya?

Imported goods that KEBS regulates need a Pre-Export Verification of Conformity certificate before shipment, and the PVoC Manual Version 15 sets out how that inspection and document review works. Machinery imported by a registered manufacturer for its own use falls under published exemption criteria. Paul confirms the route with the Kenyan buyer during engineering and supplies the test reports, drawings and nameplate data the verification body reviews.

What is the Kenya VAT rate on imported process machinery?

Kenya charges VAT at the standard rate of 16 percent on imported machinery, calculated on the CIF value plus import duty and the other import charges, including the 2.5 percent Import Declaration Fee and the 2 percent Railway Development Levy. Under CIF or DAP terms the Kenyan importer pays these at clearance; under DDP they are built into Paul’s US dollar price.

How long does container shipping to Kenya from USA ports take?

Freight-route listings put container sailings from US East Coast ports such as Philadelphia and Boston to Mombasa at about 37 to 49 days, and averages for some services run past 50 days, because most voyages transship at a Mediterranean, Middle East or Asian hub. Customs clearance and the inland leg come on top. Paul books the sailing to match the factory acceptance test and the site’s readiness.

Does Paul Industries supply boiler systems to tea factories in Kericho?

Paul Industries supplies boiler feed systems, deaerators, condensate return units, steam distribution headers and water treatment to tea factories in Kericho, Nandi, Kisii and the Mount Kenya region. Each package is sized for the factory’s withering and drying load and its fuel, whether wood, briquettes or fuel oil, and arrives with the documents Kenya’s boiler examiners review.

What equipment do geothermal plants at Olkaria near Naivasha buy from abroad?

Geothermal plants at Olkaria near Naivasha run on steam and brine that carry silica, hydrogen sulfide and chlorides, so they buy cooling water treatment systems, condensate and brine pumps, corrosion-resistant piping, separators and pressure vessels. Paul engineers these packages in duplex or other suitable alloys, tests them in the United States and ships them through Mombasa for installation at the field.

Who installs process equipment at plants in Mombasa and Athi River?

Paul Industries installs process equipment at plants in Mombasa and Athi River, or supervises the installation, depending on the contract the buyer chooses. Cement works at Mombasa buy compressed air systems, dust collection and cooling water skids, and food, beverage and other factories at Athi River buy CIP, steam and water treatment. Paul sets, pipes, wires and commissions the equipment and hands over the records.

How does altitude in the Kenyan highlands change equipment design?

Nairobi lies at about 1,600 to 1,900 m and much of the tea country lies higher, so air is thinner than at sea level. Air-cooled condensers, motors, transformers and control panels lose cooling capacity, and atmospheric boiling points fall, which matters for deaerators and hot water systems. Paul enters the site elevation in the design basis and sizes and derates the equipment for it.

Which Incoterm suits a first order from a Kenyan plant?

Many Kenyan buyers with an experienced clearing agent choose CIF Mombasa or CFR, which leaves clearance and the inland leg with the plant. Buyers who want one party responsible to the gate choose DAP to site, and DDP adds duties and taxes to Paul’s scope. Paul quotes the terms the buyer requests in US dollars under Incoterms 2020 and lists freight and insurance as separate lines.

How is equipment protected on the voyage to East Africa?

Paul packs equipment for the voyage to East Africa in ISPM 15 heat-treated timber crates with vapor barrier bags and desiccant sized for a voyage of up to two months through warm, humid waters. Stainless openings are capped and nitrogen purged, instruments and panels ship separately in sealed cases, and every crate carries lifting and center of gravity markings for handling at Mombasa.

What documents arrive with a US-built skid for a Kenyan factory?

A US-built skid for a Kenyan factory arrives with its design calculations, P&IDs and general arrangement drawings, material certificates, weld maps and NDE reports, hydrostatic test certificates, relief valve data, electrical schematics and test results, the signed factory acceptance test, operating and maintenance manuals, and a spare parts list. GMP systems add IQ and OQ protocols. Paul delivers all of it in English, on paper and electronically.

Does Paul Industries quote Kenyan projects in US dollars?

Paul Industries quotes every Kenyan project in US dollars, with equipment, engineering, documentation, freight, insurance and site work shown as separate lines under the Incoterm the buyer selects. Buyers send the process duty, the site location and elevation, the supply voltage and fault level, water analysis and the target start-up date, and Paul returns a fixed scope with a fabrication and shipping schedule.

Does Paul Industries service equipment after start-up in Kenya?

Paul Industries services the equipment it delivers to Kenyan plants after start-up through spare parts supply, membrane, resin and filter changes, relief valve testing, preventive maintenance visits, repairs and support for each statutory examination of boilers and receivers. Service is set out in a written plan at handover, and the as-built dossier is updated after every visit.

What does a dairy in Nakuru or Eldoret buy from a US process equipment builder?

A dairy in Nakuru or Eldoret typically buys HTST pasteurizer skids, CIP systems with recovery tanks, glycol or ice water chilling plants, and sanitary process piping, plus steam and condensate systems for UHT and powder lines. Paul builds these to 3-A and ASME BPE practice in 304 or 316L stainless, wires them for 415 V and 50 Hz, and commissions them with the plant’s quality team.

Planning steam, water or process equipment for a plant in Kenya?

Send Paul Industries the process duty, the site and its elevation, the supply details and the target start-up, and the reply sets out the code documents, the sailing to Mombasa and a US dollar budget. Call 201-450-8280 or request a quote.