Paul Industries designs, builds, installs and qualifies ultrapure water systems in Pennsylvania for cell and gene therapy suites, pharmaceutical plants, semiconductor and photonics fabs, university labs and power stations, from pretreatment and reverse osmosis through electrodeionization, polishing and the distribution loop. Pennsylvania feedwater ranges from moderately hard Delaware River water to hard Schuylkill supplies and Allegheny River water in the west, and large plants answer to two interstate basin commissions. Paul Industries sizes each train to the water the site actually receives and the purity its process needs.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Philadelphia feedwater Hardness 98 to 168 ppm by plant, 2024 averages (PWD)
Disinfectant Chlorine plus ammonia (chloramine) in Philadelphia supply
Basin approvals SRBC 20,000 gpd consumptive use; DRBC 100,000 gpd withdrawals
Industrial power Pennsylvania 7.87 cents/kWh, US 8.13 (EIA, 2024)
Reviewed November 2026

Where do ultrapure water systems in Pennsylvania earn their keep?

Ultrapure water systems in Pennsylvania serve four groups of users: advanced therapy and biologics makers in the Philadelphia region, pharmaceutical plants across the southeast and the Lehigh Valley, semiconductor and photonics manufacturers in the Lehigh Valley and western Pennsylvania, and research universities and power stations statewide. Each group defines purity in its own terms, from resistivity and total organic carbon to particles, silica, bacteria and endotoxin, and the treatment train follows that definition.

Pennsylvania ultrapure water users and the specification each one works to
UserTypical specificationWhat the system emphasizesWhere in Pennsylvania
Cell and gene therapy and biologicsUSP Purified Water and Water for Injection limits, plus Type 1 water for media, buffer and lab workMicrobial control, endotoxin, sanitizable loops, documented qualificationPhiladelphia, University City, Montgomery and Chester counties
Pharmaceutical manufacturing and quality labsUSP conductivity and TOC; ASTM D1193 reagent water for labsStable conductivity and TOC, hot or ozonated sanitization, records under 21 CFR 211King of Prussia, Malvern, the Great Valley, the Lehigh Valley
Semiconductor, compound semiconductor and photonicsSEMI F63 and ASTM D5127 grades: 18.2 megohm-cm, sub-ppb ions, low TOC, particles and dissolved oxygenDouble-pass RO, EDI, UV oxidation, mixed bed polishing, ultrafiltration, degassingLehigh Valley and western Pennsylvania
University research cleanroomsType 1 water at the point of use, often below SEMI targetsReliable loops serving many tools and labs from one plantPhiladelphia, Pittsburgh, State College, Bethlehem
Power generationDemineralized makeup water for steam cyclesHigh-volume RO and EDI or ion exchange, silica controlNuclear and combined-cycle stations across the state

Pharmaceutical companies in Pennsylvania and advanced therapy water needs

Pharmaceutical companies in Pennsylvania cluster in the suburban corridor through King of Prussia, Malvern and the Great Valley in Montgomery and Chester counties, with more plants in the Lehigh Valley and Central Pennsylvania, and the region’s cell and gene therapy cluster has added a new class of water user. Any list of pharmaceutical companies in Pennsylvania now includes advanced therapy makers whose processes run small batches of very high value, where a water excursion can cost a batch and a regulatory investigation.

The cell and gene therapy companies in Philadelphia and its suburbs use compendial water for buffers, media preparation, cleaning and final rinses, and Type 1 ultrapure water in process development and quality control labs. New capacity keeps arriving: in February 2026 Johnson & Johnson announced a cell therapy manufacturing plant of more than $1 billion in Lower Gwynedd Township, Montgomery County, joining manufacturing already operating in University City and around the Navy Yard. These are market facts that show where demand sits; the water requirements apply to any site in the cluster.

For these users, an ultrapure water plant is part of a validated system. Paul Industries builds the generation skid, storage and loop in sanitary construction where the water touches product, with the qualification documents the quality unit needs; compendial generation and distribution for the same sites is covered on high-purity water systems in Pennsylvania, and the rooms the loops serve on cleanrooms in Pennsylvania.

Semiconductor companies in Pennsylvania and their water

Semiconductor companies in Pennsylvania are concentrated in compound semiconductors, photonics and materials rather than advanced silicon logic, and that shapes their water. Coherent, headquartered in Saxonburg in western Pennsylvania, received a $15 million award in 2024 through a Defense Department microelectronics hub for silicon carbide and diamond work, and in January 2025 announced a non-binding agreement for up to $79 million in CHIPS Act funding to expand silicon carbide substrate production at its Palmer Township facility in the Lehigh Valley.

The semiconductor industry Pennsylvania hosts uses ultrapure water for crystal and wafer cleaning, polishing, rinsing and wet processing. Substrate and polishing processes add their own load: slurry rinses and high particle counts in the return water, which make rinse water recovery and reclaim more involved than in a simple lab loop. Paul Industries designs those plants to SEMI F63 targets where the process calls for them, with reclaim streams segregated by quality so the cleanest returns go back to the front of the plant. Process tool hookups and the cleanroom side are described on the semiconductor industry page.

Pennsylvania water hardness and feedwater from region to region

Pennsylvania water hardness varies by supply, from moderately hard Delaware River water in Northeast Philadelphia to hard Schuylkill water in the rest of the city and groundwater of widely varying hardness in the central valleys. So does Pennsylvania have hard water? Much of it is moderately hard to hard, but the answer for a plant is the number in its own supplier’s report, along with alkalinity, silica, organics and the disinfectant, because those set the pretreatment, the RO recovery and the cleaning frequency.

Philadelphia water quality by treatment plant

Philadelphia water quality differs by which of the city’s three plants serves a building. The Philadelphia Water Department’s 2024 Philadelphia water quality report shows the Baxter plant, drawing from the Delaware River, averaging 98 parts per million hardness, while the Belmont and Queen Lane plants, drawing from the Schuylkill, averaged 152 and 168. So is Philadelphia water hard or soft? Moderately hard from Baxter and hard from the Schuylkill plants, with Queen Lane ranging up to 220 parts per million over the year.

Philadelphia Water Department 2024 averages and what they mean for an ultrapure water train
Treatment plant and riverHardness, one-year averageAlkalinity averageSodium averageDesign consequence
Baxter (Delaware River)98 ppm (6 gpg), range 81 to 11341 ppm23 ppmModerate scaling load; softener or antiscalant sized for the lower end of the city range
Belmont (Schuylkill River)152 ppm (9 gpg), range 114 to 20675 ppm47 ppmHigher hardness and alkalinity limit RO recovery; more CO2 for the degasser or EDI to handle
Queen Lane (Schuylkill River)168 ppm (10 gpg), range 99 to 22072 ppm41 ppmWidest seasonal swing; pretreatment sized for the high end of the range

Philadelphia water hardness is only half the pretreatment story. The city adds chlorine and then ammonia, forming chloramine, which activated carbon breaks down far more slowly than free chlorine and which leaves ammonia behind for the downstream stages to remove. River temperatures that ran from about 34 to 91 degrees Fahrenheit in 2024 change RO output through the year, so membranes are sized for winter water and the high-pressure pumps run on variable speed drives to hold flow as temperatures climb. Paul Industries designs carbon contact time or bisulfite dosing for chloramine, and adds a second RO pass or EDI capacity to carry the ammonia and carbon dioxide that reach the polishing stages.

Pittsburgh water quality and western Pennsylvania supplies

Pittsburgh water quality starts with the Allegheny River, which Pittsburgh Water treats at its Aspinwall plant before distribution. Is Pittsburgh water hard or soft? The utility describes it as moderately hard. River supplies in the west change with rain, snowmelt and upstream conditions, so organic load and turbidity move through the year, and plants served by surrounding authorities may receive water from other rivers or wells. Paul Industries designs western Pennsylvania trains with ultrafiltration or robust media filtration ahead of RO where the river signal is strong, and with TOC removal sized for spring and autumn peaks.

Central Pennsylvania, the Susquehanna basin and groundwater sites

Sites in Harrisburg, Lancaster, York, State College and the central valleys often draw on groundwater or small municipal systems, where hardness, silica and iron change from well to well. Silica sets the RO recovery limit on many of those supplies and has to be held to very low levels in the final ultrapure water, so the treatment train is chosen only after a full water analysis, including seasonal samples where the supply blends sources.

River basin approvals for large ultrapure water plants

Large ultrapure water plants in Pennsylvania can need river basin approvals, because the RO reject, regeneration waste and process use add up to significant water demand. In the Susquehanna basin, a project drawing 100,000 gallons a day, or consuming 20,000 gallons a day, measured as 30-day averages, goes to the Commission for approval. On the Delaware side, the threshold for review is a withdrawal of more than 100,000 gallons a day, except in the Southeastern Pennsylvania Groundwater Protected Area, where wells drawing 10,000 gallons a day need a protected area permit.

Recovery is the design lever. A plant that recovers second-pass RO reject to the first-pass feed, sends EDI concentrate back to the front, and reuses clean rinse returns draws less raw water for the same product flow. Paul Industries designs those recovery streams, meters them for the owner’s reports, and routes the remaining concentrate to the plant’s wastewater system, described on process wastewater and effluent.

How is ultrapure water made for a Pennsylvania fab, lab or plant?

Ultrapure water is made by removing everything other than water in stages: particles and scaling ions first, then most dissolved salts and organics by reverse osmosis, then the remaining ions by electrodeionization, then trace organics by ultraviolet oxidation, with nonregenerable mixed bed resin, degassing and final filtration polishing the water to specification. For anyone asking how is ultrapure water made, the stages below show what each one does and what Pennsylvania feedwater adds to it.

An ultra pure water treatment system stage by stage, with Pennsylvania feedwater notes
StagePurposePennsylvania feedwater note
Media or ultrafiltrationRemove suspended solids and colloidsRiver supplies in the west and the Schuylkill carry seasonal turbidity
Softening or antiscalantPrevent hardness scale on membranesHardness from about 100 to over 200 ppm in Philadelphia alone
Carbon or sodium bisulfiteRemove chlorine and chloramine that damage membranes and resinChloramine in Philadelphia supply needs more contact time than free chlorine
First- and second-pass RORemove most salts, silica and organicsWinter water near freezing temperatures sets the membrane area
ElectrodeionizationRemove remaining ions continuously without chemical regenerationAmmonia and carbon dioxide from the feed raise the ionic load
185 nm UV and mixed bed polishingBreak down trace organics, then capture the ions formedSeasonal organic peaks in river supplies show up here first
Degassing, ultrafiltration and loop UVLower dissolved oxygen and particles; hold bacteria down in the loopRequired on semiconductor loops; optional on many lab loops

The ultrapure water polishing system and the distribution loop are where final quality is won or lost. Polishing runs continuously on a recirculating loop, with resistivity, TOC, particle and, for semiconductor work, dissolved oxygen and silica measured at the return; dead legs, stagnant branches and poor material choices undo upstream work. Paul Industries fabricates and installs loops in PVDF or other high-purity thermoplastics for semiconductor and lab water, and in 316L stainless steel to ASME BPE where compendial water and heat sanitization are required, with the welding and passivation described on passivation services in Pennsylvania. Storage vessels and their vents are built and installed through tank fabrication in Pennsylvania.

Ultrapure water vs deionized water

Ultrapure water vs deionized water comes down to how much is removed and how it is proven. Deionized water has had ions removed by ion exchange or EDI and may reach high resistivity, but it can still carry organics, particles, bacteria and dissolved gases; ultrapure water is deionized and then treated for each of those, and it is monitored continuously against limits for each. A type 1 ultrapure water system for a lab reaches 18.2 megohm-cm at 25 degrees Celsius at the point of use, while a semiconductor plant adds limits on particles, metals, silica and dissolved oxygen in the parts per billion or below.

Deionized water and ultrapure water compared
PropertyDeionized waterUltrapure water
Ionic purityHigh resistivity possible, often 1 to 18 megohm-cm depending on the stage18.2 megohm-cm at 25 C, held continuously at the loop return
OrganicsNot specifically reduced; resin can add organicsTOC reduced by RO and 185 nm UV and monitored online
Particles and bacteriaNot controlled unless filters are addedUltrafiltration, loop UV and sanitization hold both to limits
Dissolved gasesNot controlledDegassed where the process sets an oxygen limit
Typical usesWashing, boiler and cooling makeup, general rinsesWafer and substrate processing, analytical labs, cell culture and media work

Many Pennsylvania sites need both: deionized water for general washing, boiler or cooling makeup and noncritical rinses, and ultrapure water only where the process demands it. Paul Industries designs the plant so the deionized stream branches off before polishing, which keeps the costly stages sized to the true ultrapure demand; standalone deionized systems are covered on industrial DI water systems.

Monitoring and qualification of ultrapure water quality

Ultrapure water quality is proven by continuous online monitoring and periodic laboratory testing, with the instrument set chosen for the specification: resistivity and TOC on every system, plus particle counters, dissolved oxygen, silica and sodium analyzers on semiconductor loops, and bacteria and endotoxin sampling on pharmaceutical and cell therapy systems. Each instrument is calibrated, alarmed and trended, so drift is caught before water goes out of specification.

For regulated users, the system is qualified through installation, operational and performance qualification, and performance qualification for compendial water usually runs in phases that track the system through a full year of seasonal feedwater change. Paul Industries prepares and executes those protocols, and the full validation scope for the state is on validation and commissioning in Pennsylvania.

Sanitization and microbial control on Pennsylvania cell therapy and pharmaceutical loops

Sanitization keeps an ultrapure or compendial loop within its microbial limits, and Pennsylvania’s advanced therapy sites choose among three methods: hot water, ozone and ultraviolet light, often in combination. Hot water sanitization suits 316L stainless loops built to ASME BPE; ozone, dissolved in the storage tank and destroyed by 254 nanometer UV before the points of use, suits both stainless and suitable thermoplastic loops; and continuous UV on the loop holds bacteria down between sanitizations.

The method has to be chosen with the loop, not after it. Thermoplastic piping limits sanitization temperature, gaskets and diaphragm valves must suit the chosen chemistry, and every branch must be short and drainable so sanitant and hot water reach it. Paul Industries designs the loop, the sanitization sequence and the sampling points together, then demonstrates the sequence during operational qualification so the quality unit has data showing every point of use reaches the target temperature or ozone level. Point-of-use cooling, where a hot loop serves room-temperature uses, is built with sanitary heat exchangers that are included in the sanitization cycle.

Demineralized makeup for Pennsylvania power and campus plants

Demineralized makeup water is the high-volume end of Pennsylvania’s ultrapure water demand, used in the steam cycles of the state’s nuclear and combined-cycle stations and in boilers and gas turbine systems that need low-silica, low-conductivity water. New gas-fired generation planned beside data center campuses, such as the conversion of the former Homer City coal plant in Indiana County into a campus with up to 4.5 gigawatts of generation, adds to that demand wherever turbines use water injection, inlet fogging or heat recovery steam generators.

Power plant trains favor reliability and throughput over the parts-per-trillion limits of a semiconductor loop: duplex or triplex RO, EDI or regenerable ion exchange, deaeration, and storage sized for startup and outage demands. Silica control matters most, because silica carried into a steam cycle deposits on turbine blades. Paul Industries designs and installs those makeup plants with the same pretreatment logic used for fabs and labs, sized to the river or well supply at the site, and connects them to boiler and condensate systems described on boiler water treatment.

What sets ultrapure water system price in Pennsylvania?

Ultrapure water system price in Pennsylvania is set by the product flow and peak demand, the purity specification, the feedwater analysis, the loop length and material, the level of redundancy, and the qualification the site needs. A lab loop serving a few points of use at Type 1 quality and a semiconductor plant producing hundreds of gallons per minute to SEMI F63 differ by orders of magnitude, and the same flow costs more where hard, chloraminated feed requires heavier pretreatment.

Ultrapure water cost over the life of the plant includes power for RO pumps and UV, membrane and resin replacement, cartridge and filter changes, instrument calibration, sanitization, and the water and sewer charges for reject. Industrial electricity in Pennsylvania averaged 7.87 cents per kilowatt-hour in 2024, a little under the US figure (EIA), which keeps the energy line moderate, while recovery design reduces water and sewer costs. Paul Industries prices supply-only skids, design-build plants and complete installations, gives a budget range from comparable scope once the flow and specification are known, and a firm price after the water analysis and site survey.

Who designs and builds ultrapure water systems in Pennsylvania?

Paul Industries designs and builds ultrapure water systems in Pennsylvania as an East Coast contractor headquartered at 256 Shore Drive, Kilmarnock, Virginia, and formerly based in northern New Jersey and then Pennsylvania. It takes ultrapure water work in Philadelphia and University City, King of Prussia, Malvern and the Montgomery, Chester and Bucks county suburbs, the Lehigh Valley, Reading, Lancaster, Harrisburg, State College, Scranton and Wilkes-Barre, Erie and Pittsburgh, and in all 50 states.

The same scope reaches the headquarters state on ultrapure water systems in Virginia and the neighboring state on ultrapure water systems in New Jersey. The national treatment of the technology is on the ultrapure water systems page, and final membrane and cartridge stages on high-purity water filtration.

Ultrapure water from Paul Industries across Pennsylvania

Paul Industries designs, fabricates, supplies, installs, qualifies, services and expands ultrapure water systems for Pennsylvania cell therapy, pharmaceutical, semiconductor, university and power sites, from pretreatment through the polishing loop and its monitoring. To price a system, send the supplier’s latest water quality report or a full feedwater analysis, the product flow and peak demand, the purity specification, the loop layout and the qualification required. Call 201-450-8280 or request a quote. Process, water and piping services across the state are listed on the Pennsylvania page, and connecting piping on process piping in Pennsylvania.

Standards referenced: SEMI F63 · ASTM D5127 · ASTM D1193 · USP <1231> Water for Pharmaceutical Purposes · USP <645> Water Conductivity · USP <643> Total Organic Carbon · 21 CFR Parts 210 and 211 · ASME BPE · Susquehanna River Basin Commission regulations (18 CFR Part 806) · Delaware River Basin Commission water withdrawal rules

Frequently asked questions

Which contractor builds ultrapure water systems for cell therapy sites in Philadelphia and University City?

Paul Industries builds ultrapure and compendial water systems for cell and gene therapy companies in Philadelphia, University City and the Navy Yard, with sanitary loops, microbial control and qualification documents for the quality unit. Most of those sites draw Schuylkill or Delaware River water through the city system, so the train is designed for hard, chloraminated feed with seasonal temperature swings.

Does Paul Industries install ultrapure water systems in King of Prussia, Malvern and the Great Valley?

Yes. Paul Industries installs ultrapure water systems for pharmaceutical and biologics sites in King of Prussia, Malvern, Exton and across Montgomery and Chester counties, including expansions tied into running loops. Suburban suppliers in the area draw on different rivers and wells, so each design starts from the site’s own water quality report and a fresh analysis.

Who builds ultrapure water systems in Pittsburgh and Western Pennsylvania?

Paul Industries builds ultrapure water systems in Pittsburgh, Butler County and across Western Pennsylvania for semiconductor and photonics makers, university research cleanrooms, hospitals and power plants. Allegheny River supply, treated at Aspinwall, is moderately hard and carries seasonal organic and turbidity swings, so pretreatment includes robust filtration and TOC control sized for spring runoff.

Does Paul Industries take ultrapure water work in the Lehigh Valley, Harrisburg and Lancaster?

Yes. Paul Industries takes ultrapure water work in Allentown, Bethlehem and Easton, Harrisburg, Lancaster, York and Reading, for compound semiconductor, pharmaceutical, food and lab sites. Many Central Pennsylvania sites run on groundwater, where silica and hardness vary by well, so the RO recovery and the polishing stages are set from a full water analysis.

Do semiconductor companies in Pennsylvania need SEMI F63 water?

Sites making wafers, substrates and devices generally work to SEMI F63 or ASTM D5127 targets for resistivity, TOC, metals, particles, silica and dissolved oxygen, though some compound semiconductor and photonics processes set their own limits. Paul Industries designs to the customer’s specification, using SEMI F63 as the reference where the process calls for it.

Which cell and gene therapy companies in Pennsylvania use ultrapure water?

Cell and gene therapy companies in Pennsylvania, from University City developers to large commercial plants in Montgomery County, use compendial water in manufacturing and Type 1 ultrapure water in process development and quality control labs. Paul Industries builds both kinds of system, with sanitary construction, microbial monitoring and qualification records suited to an FDA-regulated site.

How hard is Philadelphia water for an RO plant?

The Philadelphia Water Department’s 2024 averages were 98 parts per million hardness from the Delaware River Baxter plant and 152 and 168 from the Schuylkill River Belmont and Queen Lane plants, with Queen Lane peaking at 220. Alkalinity averaged 41 to 75 parts per million. That range means softening or antiscalant sized for the worst season and RO recovery set from the actual plant serving the site.

Why does chloramine in Philadelphia water matter to an ultrapure water plant?

Chloramine damages RO membranes and EDI resin like chlorine, but activated carbon breaks it down more slowly, so carbon beds need longer contact time, catalytic carbon or bisulfite dosing. Breaking chloramine down also releases ammonia, which adds to the ionic load that RO, EDI and polishing resin must remove. Paul Industries designs pretreatment and polishing for that chemistry from the start.

Does a large ultrapure water plant need Susquehanna River Basin Commission approval?

A plant in the Susquehanna basin needs approval if its withdrawals reach 100,000 gallons per day or its consumptive use reaches 20,000 gallons per day, both averaged over 30 days. Water lost to evaporation or shipped in product counts as consumptive use. Recovery of reject and rinse streams lowers both figures, and Paul Industries meters those streams so the owner can report them.

How do Pennsylvania winters affect an ultrapure water plant?

Cold feedwater lowers RO permeate flow, so membrane area and pump pressure are sized for winter temperatures, and variable speed drives hold output steady as water warms. Philadelphia’s rivers ran from about 34 to 91 degrees Fahrenheit in 2024. Outdoor tanks, vents and piping also need freeze protection, and heat exchangers ahead of RO can temper feedwater where output must stay constant.

Can RO reject water be reused at a Pennsylvania site?

Often, yes. Second-pass RO reject and EDI concentrate are cleaner than city water and can return to the first-pass feed, while first-pass reject can supply cooling tower makeup, scrubbers or washdown where its salts are acceptable. Reuse cuts water and sewer charges and can keep a plant below basin commission thresholds. Paul Industries designs and pipes those recovery streams.

What is a type 1 ultrapure water system and does a lab need one?

A Type 1 system delivers water at 18.2 megohm-cm at 25 degrees Celsius with low TOC, typically by polishing purified feed through ion exchange, UV and final filtration at the point of use. Labs running trace analysis, cell culture, chromatography and mass spectrometry need it. Paul Industries supplies point-of-use polishers and central loops that feed many labs from one plant.

Can an existing purified water system be upgraded to ultrapure quality?

Often, by adding EDI or polishing resin, 185 nm UV for TOC reduction, ultrafiltration and degassing after the existing RO, and by replacing loop sections whose materials shed ions or particles. Pretreatment and RO capacity have to be checked against the new demand. Paul Industries surveys the plant, tests the water at each stage and designs the upgrade around what can stay.

How long does it take to tie a new tool or lab into a running ultrapure loop?

Duration depends on whether the loop already has valved, capped branch points. With them, a tie-in is a planned short outage plus flushing and testing of the new branch; without them, a hot tap or a scheduled loop shutdown is needed, followed by sanitization and requalification. Paul Industries plans tie-ins to the site’s production calendar and tests the branch before it serves product.

What records come with a new ultrapure water system in Pennsylvania?

Owners receive as-built drawings and isometrics, material and weld records, pressure and passivation records for stainless sections, instrument calibration certificates, startup data and, for regulated sites, executed IQ, OQ and PQ protocols. Semiconductor customers also receive the baseline water quality data for each monitored parameter at the loop return.

How does Paul Industries keep an ultrapure water plant performing after startup?

Paul Industries services ultrapure plants on a schedule: membrane cleaning and normalized performance tracking, resin and filter changes, UV lamp replacement, instrument calibration, loop sanitization and trend review. Service records are kept so a slow drift in TOC, resistivity or pressure shows up early, and repairs are planned before the water goes out of specification.

What should a Pennsylvania site send to get an ultrapure water system priced?

Send the latest supplier water quality report or a feedwater analysis, the product flow and peak demand, the purity specification or standard, the number and location of points of use, any existing equipment to reuse, the space available and the qualification required. Paul Industries returns a budget range from comparable scope and a firm price once the analysis and site survey are complete.

Planning ultrapure water for a Pennsylvania site?

Send the water quality report or feedwater analysis, flow, purity specification and loop layout. Call 201-450-8280 or request a quote.