Paul Industries designs, installs and services data center cooling in Pennsylvania, building chilled water plants, cooling tower and dry cooler systems and the piping that carries heat out of colocation halls, enterprise rooms and new hyperscale campuses from Philadelphia to Pittsburgh. Two Pennsylvania questions shape almost every plant: how much water the heat rejection may evaporate under the river basin commissions, and how a climate that runs from humid Philadelphia summers to snowy Erie winters changes the equipment. Paul Industries, headquartered at 256 Shore Drive in Kilmarnock, Virginia, and formerly based in Pennsylvania, takes cooling plant work across the Commonwealth.
Request a quote or call 201-450-8280
Data center cooling in Pennsylvania: what the job covers
Data center cooling in Pennsylvania covers the central plant (chillers, towers or dry coolers, pumps and heat exchangers), the chilled water and condenser water mains, the branch piping to air handlers, fan walls or coolant distribution units, the controls that sequence it all, and the water and power arrangements a Pennsylvania site needs before the plant can run. Paul Industries builds that scope as one contract, from equipment selection through flushing, pressure testing and startup.
The general engineering, from containment to free cooling, sits on the data center cooling systems page. This page stays with the Pennsylvania side: where the halls are going, the weather each region delivers, the water rules that decide between evaporative and dry heat rejection, and what the Commonwealth’s power prices mean for the cooling budget. For the denser racks now arriving, the liquid cooling work in Pennsylvania page carries the rack-side detail.
Where are the data centers in Pennsylvania, and what does each region ask of a cooling plant?
Pennsylvania data center growth is spreading across the state rather than gathering in one county, because developers are following available power, reusable industrial land and water. Southeastern Pennsylvania has long hosted enterprise and colocation rooms serving Philadelphia firms, and the newest announcements reach into Luzerne County, Lancaster and the former coal country east of Pittsburgh. Each region hands the cooling designer a different climate and a different water authority.
The market facts below are public announcements, listed only to show the building stock and the cooling problems each area raises. In June 2025 Amazon announced at least $20 billion for two campuses: one in Salem Township, Luzerne County, beside the Susquehanna nuclear plant, and one at the Keystone Trade Center in Falls Township, Bucks County, on land U.S. Steel once owned. The Homer City Energy Campus in Indiana County, announced in April 2025, plans up to 4.5 gigawatts of gas-fired generation on about 3,200 acres of a former coal plant site. In Lancaster, developers have proposed halls on two former printing plant sites, and CoreWeave has announced a campus planned to start at 100 megawatts with room for 300.
| Region | Typical sites | Water authority above the state | Cooling response that tends to fit |
|---|---|---|---|
| Philadelphia and the suburban counties | Urban colocation, enterprise rooms, large reused industrial parcels in Bucks County | Delaware River Basin Commission; Ground Water Protected Area in parts of the southeast | Water-cooled plants with tight make-up accounting, or dry coolers where wells would trip the 10,000 gallon groundwater limit |
| Lehigh Valley | Large logistics parcels and existing industrial buildings | Delaware River Basin Commission (the Lehigh drains to the Delaware) | Modular chiller blocks added hall by hall, air-cooled or hybrid heat rejection |
| Northeast PA: Luzerne and Lackawanna | Hyperscale campuses beside generation, large greenfield parcels | Susquehanna River Basin Commission | Closed-loop dry coolers or low-evaporation hybrids sized to the 20,000 gallon consumptive threshold or an approved allocation |
| Lancaster and South Central PA | Former printing and manufacturing plants with existing utility capacity | Susquehanna River Basin Commission | Retrofitted plants that reuse structure and power while cutting the old plant’s water draw |
| Pittsburgh and Southwest PA | University and research computing, enterprise rooms, power-plant redevelopments | Ohio River basin, with state registration under Act 220 | Water-side economizers that use a cooler summer, with freeze protection for long winters |
| Erie and the northwest | Enterprise and institutional rooms | Lake Erie basin, with state registration under Act 220 | Generous economizer hours, snow-tolerant layouts for outdoor equipment |
Developers with campuses planned in the data centers in northeast PA have the closest water scrutiny today, because the Susquehanna commission reviews consumptive use at a low threshold. Owners looking at data centers in Lehigh Valley PA parcels work under the Delaware commission instead. The data centers in western PA sit outside both commissions and register their water use with the state, which makes the Pittsburgh region the simplest of the three for an evaporative plant, though rarely the deciding factor.
How Pennsylvania weather sizes the plant
Pennsylvania weather sizes a data center cooling plant through two numbers: how hot and humid the peak summer hours run, which fixes chiller and tower capacity, and how many cool hours the year offers, which sets the economizer savings. NOAA’s 1991 to 2020 normals show a spread of seven degrees in average July highs across the state’s main cities, from 88 degrees Fahrenheit in Philadelphia and Harrisburg to 81 in Erie and State College.
| City | July average high / low | January average high / low | Plant consequence |
|---|---|---|---|
| Philadelphia | 88 F / 70 F | 41 F / 26 F | Warm, humid nights keep chillers loaded around the clock in July; the shortest economizer season in the state |
| Harrisburg | 88 F / 67 F | 40 F / 25 F | Summer peaks close to Philadelphia’s, cooler nights give towers some recovery |
| Allentown | 86 F / 65 F | 38 F / 22 F | Lehigh Valley plants see colder winters than Philadelphia, so freeze protection carries more weight |
| Wilkes-Barre and Scranton | 85 F / 63 F | 36 F / 20 F | Cooler summer nights and a long cold season favor dry coolers and water-side economizers |
| Pittsburgh | 83 F / 63 F | 36 F / 21 F | Lower summer peaks than the southeast trim heat rejection capacity; winter freeze care is routine |
| Erie | 81 F / 64 F | 35 F / 21 F | Mildest summer of the group; snow and icing drive equipment layout and access |
Normals are averages, and a plant is sized on the design extremes that sit above them, so the table is a guide to how regions differ rather than a selection basis. Paul Industries selects chillers, towers and dry coolers on the design-day dry bulb and wet bulb for the nearest weather station, then checks the selection at the less extreme conditions where the plant actually spends its hours. Tower selection follows wet bulb; dry cooler and air-cooled chiller selection follows dry bulb, and that difference matters more in Philadelphia’s humid air than in Erie’s.
Free cooling hours across the Commonwealth
Free cooling hours rise as a site moves north and west in Pennsylvania, because the economizer runs whenever outdoor conditions sit far enough below the water temperature the hall needs. A plant supplying 45 degree water gets little beyond winter in any Pennsylvania city. A plant supplying 60 to 65 degree water, which current server air inlet targets allow, picks up partial free cooling through spring and autumn in Philadelphia and considerably more in Scranton, State College, Pittsburgh and Erie. Where the hall carries liquid-cooled racks on warm water, dry coolers can carry the load for most of the year without a compressor running.
A kilowatt removed by a higher supply temperature never appears on a Pennsylvania power bill, so Paul Industries reviews coil selections, air handler capacity and chiller minimum lift before raising setpoints on an existing plant. Coils selected for 45 degree water often need added rows or replacement to deliver the same capacity at 60.
How much water can a Pennsylvania data center cooling plant use?
A Pennsylvania data center cooling plant can use as much water as its approvals allow, and three layers of rules set those approvals: the Susquehanna River Basin Commission across the center of the state, the Delaware River Basin Commission in the east, and Pennsylvania’s own Act 220 registration everywhere. For a hyperscale data center, Pennsylvania thresholds are reached by evaporation within the first halls, and even an evaporative plant of moderate size will reach them, so water is a design input from the first sketch rather than a permit chore at the end.
The Susquehanna commission reviews withdrawals of 100,000 gallons a day and consumptive use of 20,000 gallons a day, both as 30-day averages, and it says plainly that a data center reaching those thresholds needs its approval before operating. Consumptive use means water taken and not returned to the basin, which for a cooling tower is mostly evaporation and drift. A site supplied from a public water system skips the withdrawal review but still needs consumptive use approval above 20,000 gallons, usually through the commission’s Approval by Rule, type (e). Rejecting one megawatt of heat by evaporation evaporates on the order of 10,000 gallons of water a day (water absorbs about 970 Btu per pound as it evaporates), so a tower plant serving about two megawatts of load reaches the consumptive threshold.
| Authority | Where it applies | Trigger (30-day average) | What it means for the cooling design |
|---|---|---|---|
| Susquehanna River Basin Commission | Central Pennsylvania, including Luzerne, Lackawanna, Lancaster, Dauphin and Centre counties | Withdrawals of 100,000 gallons a day; consumptive use of 20,000 gallons a day | Evaporative towers on a large campus will need approval; dry coolers and hybrids can keep a site under the consumptive trigger |
| Delaware River Basin Commission | Philadelphia, the suburban counties, the Lehigh Valley and the Poconos | Withdrawals above 100,000 gallons a day; above 10,000 gallons a day from wells in the Southeastern Pennsylvania Ground Water Protected Area | Well-fed make-up water in the protected area is constrained early; public supply or reclaimed water changes the path |
| Pennsylvania DEP, Act 220 | Statewide | Withdrawals above 10,000 gallons a day; public water purchases above 100,000 gallons a day | Registration and reporting of the plant’s water use, including where no commission applies |
| Pennsylvania DEP and the municipality | Statewide | Any blowdown discharge | Tower blowdown chemistry and the sewer or stream route it takes are permitted separately |
Lancaster shows how the thresholds steer design. The developers of the two former printing plant sites told the Susquehanna commission each site would average under 20,000 gallons a day, against the 150,000 and 99,000 gallons a day the old plants had been allotted. A hall can hit numbers like that only with closed-loop heat rejection, so the commitment fixes the cooling architecture before a chiller is chosen.
Dry coolers, hybrid towers or evaporative towers for a Pennsylvania hall?
The choice among dry coolers, hybrid towers and evaporative towers for a Pennsylvania hall trades water against power and footprint. Evaporative towers cool condenser water toward the wet bulb and give a lower chiller lift than dry equipment, but they consume water at a rate the commissions will count. Dry coolers consume no water in normal operation but reject heat toward the dry bulb, which is higher on humid days, so they need more surface area and lean harder on the chillers at the July peak.
| Option | Water use | Peak-day performance | Pennsylvania fit | Winter care |
|---|---|---|---|---|
| Open evaporative cooling tower | Highest: evaporation, drift and blowdown | Best chiller efficiency at peak | Western sites and smaller plants under the thresholds; large campuses with an approved allocation | Basin heaters, bypass to basin, fan cycling to prevent icing |
| Closed-circuit fluid cooler | Evaporates when the spray runs; dry in cold weather | Close to an open tower | Good middle path where make-up water is limited | Glycol in the coil, or drained coils |
| Hybrid or adiabatic cooler | Water only on the hottest hours | Adiabatic pre-cooling trims the dry bulb penalty | Common choice for staying under a 20,000 gallon consumptive limit | Pads drained and isolated through the cold season |
| Dry cooler | None in normal operation | Needs the most surface; chillers trim at peak | Northeast and northern sites with long cool seasons; warm-water liquid cooling loops | Glycol strength set to the site’s winter design temperature |
| Air-cooled chiller with economizer coil | None | Capacity derates on hot afternoons | Smaller rooms and edge sites across the state | Glycol or freeze-protected economizer coils |
Paul Industries models the annual water and energy for each option at the site’s weather, so the owner sees what a lower water figure costs in fan and compressor power before the commission application is filed. Where a tower plant is chosen, the data center cooling towers page covers selection and layout, and cooling tower water treatment covers the cycles of concentration that decide how much blowdown leaves the site.
Reused industrial sites and the cooling plant
Reused industrial sites are a Pennsylvania pattern in the current wave of data center building: a former steel property in Bucks County, a coal plant in Indiana County, printing plants in Lancaster. Each brings assets a cooling designer can use, such as heavy foundations, rail and road access, substations and sometimes existing water intakes, and each brings conditions that must be proven before a plant goes in.
Paul Industries surveys the existing structure for roof and slab capacity where equipment will sit, traces old process water and fire lines that may be reused or must be cut and capped, and checks whether existing water allocations carry over or must be applied for again, since a new use of the same water can need fresh approval. On brownfield sites, buried utilities and contaminated soil set the routes for new underground chilled water and condenser water piping. Where an old building is reused, new risers, dunnage and penetrations are planned around the structure rather than forced through it.
When a hall is built inside an operating plant or next to a live one, outages for tie-ins are scheduled with the facility, and temporary cooling covers any spaces that lose service during the switch. The data center mechanical contractor work in Pennsylvania page covers the wider mechanical package on these sites, and process piping in Pennsylvania covers the heavier industrial piping that often runs beside the cooling mains.
What do Pennsylvania power prices mean for cooling?
Pennsylvania power prices make every kilowatt the cooling plant saves worth real money, because the plant runs all 8,760 hours of the year. The U.S. Energy Information Administration put Pennsylvania’s 2024 average retail price across all sectors at 12.51 cents per kilowatt-hour; individual sites pay more or less depending on rate class and supply contract, so the owner’s actual rate replaces the average once it is known.
At that average, a cooling plant drawing 500 kilowatts around the clock uses 4.38 million kilowatt-hours a year, about $548,000. A plant drawing 1,000 kilowatts costs about $1.1 million a year, and 2,000 kilowatts about $2.2 million. Raising chilled water temperature, adding economizer hours or replacing old chillers moves those numbers directly, which is why Pennsylvania data center electricity rates belong in every cooling plant decision.
Capacity costs sit on top of energy. PJM’s 2027/2028 capacity auction cleared at its $333.44 per megawatt-day cap, about $121,700 per megawatt over a year, and PJM attributed nearly 5,100 megawatts of that year’s higher forecast peak to data centers. Lowering the cooling plant’s draw during system peaks lowers the share of that cost a site carries. The utility delivering the power depends on the address: PECO around Philadelphia, PPL Electric Utilities across much of central and eastern Pennsylvania, Duquesne Light around Pittsburgh, and FirstEnergy’s Met-Ed, Penelec, Penn Power and West Penn Power elsewhere.
Winter in a Pennsylvania cooling plant
Winter in a Pennsylvania cooling plant brings freezing risk to every outdoor wet component, from tower basins to dry cooler coils to the condenser water piping that crosses a roof. January normal lows sit between 20 and 26 degrees Fahrenheit in the cities above, and design lows are far colder. A data center’s cooling load continues through the winter, so the plant must reject heat in weather that would freeze an idle loop.
Paul Industries designs winter operation into the plant: basin heaters and indoor sump tanks for towers, variable-speed fans that run slow rather than cycling hard, bypass valves that keep water moving over the fill, glycol at a strength set to the site’s design low for dry coolers, and heat tracing with insulation on exposed piping. In the northwest, snow load and drifting decide where equipment sits and how technicians reach it. In a data center, Pennsylvania winters are the season of free cooling, and the plant has to be built to take the gift without freezing.
What are the data center cooling requirements a Pennsylvania permit checks?
The data center cooling requirements a Pennsylvania permit checks come from the Uniform Construction Code, which adopted the 2021 International Codes, including the mechanical, plumbing and energy codes, effective January 1, 2026. Municipalities that enforce the code issue the permits and perform inspections; in municipalities that gave up enforcement, commercial work goes to the state’s Department of Labor and Industry, and Philadelphia administers the code through its own Department of Licenses and Inspections.
The permit drawings show equipment, piping, refrigerant quantities and machinery room provisions for chillers, along with the energy code compliance path. Test reports for piping, start-up records and the commissioning documentation follow at inspection. The data center commissioning in Pennsylvania page covers that inspection and testing sequence in depth.
What does data center cooling cost in Pennsylvania?
Data center cooling cost in Pennsylvania depends on the cooling capacity, the heat rejection choice, the redundancy level, the building and the water arrangements, and each of these varies so much between projects that a figure per kilowatt without scope behind it misleads. Paul Industries gives a budget range from comparable scope once the load and redundancy are known, then a firm price once drawings and site conditions are defined.
The cost drivers specific to Pennsylvania are worth naming. A design held under a river basin threshold usually means more dry cooler surface and more electrical capacity for fans. A reused industrial building can save on structure and power but add demolition, abatement and structural reinforcement. Winter construction adds heating, enclosures and freeze protection for filled piping. Long-lead chillers and switchgear set the schedule, so early equipment release often protects an energization date better than any field acceleration. Paul Industries prices supply-only equipment packages, design-build plants and complete installations, so the owner can choose the route that fits its procurement.
Who installs data center cooling in Pennsylvania?
Paul Industries installs data center cooling in Pennsylvania, designing and building chilled water plants, heat rejection systems and the piping that serves the hall, for colocation operators, enterprises, universities and developers across the Commonwealth. Paul Industries is an East Coast contractor headquartered in Kilmarnock, Virginia, and it takes cooling work in all 50 states and at plants abroad through its international program.
The same scope runs in neighboring markets: data center cooling in Virginia, the headquarters state, and data center cooling in New Jersey. In Pennsylvania the work ties into the other services on the Pennsylvania page, including chiller repair in Pennsylvania for plants already running.
Paul Industries cooling work for Pennsylvania data halls
Paul Industries designs, supplies, installs, tests, starts up and maintains data center cooling plants in Pennsylvania: chillers, cooling towers, dry coolers and hybrid coolers, pumps, heat exchangers, chilled water and condenser water piping, air handler and fan wall connections, and the water treatment and controls that keep them running. Paul Industries also models water use against the Susquehanna and Delaware commission thresholds and the state’s Act 220 registration, so the cooling design and the water approvals line up. Send the load, the site and the target dates, and request a quote for the plant.
Standards referenced: Susquehanna River Basin Compact and SRBC regulations (18 CFR Part 806) · Delaware River Basin Compact and DRBC regulations (18 CFR Part 401; Part 430 Ground Water Protected Area) · Pennsylvania Water Resources Planning Act (Act 220 of 2002), 25 Pa. Code Chapter 110 · Pennsylvania Uniform Construction Code (34 Pa. Code Chapters 401-405) · ASHRAE Thermal Guidelines for Data Processing Environments · ASME B31.9 Building Services Piping · ASHRAE 90.4
Frequently asked questions
Who handles data center cooling in Philadelphia and the Bucks County corridor?
Paul Industries designs and installs cooling plants for halls in Philadelphia and the suburban counties, including the large reused industrial parcels in Bucks County. Work in this region runs under the Delaware River Basin Commission’s water rules and, in parts of the southeast, its Ground Water Protected Area limit of 10,000 gallons a day from wells, which pushes many projects toward public water supply or dry heat rejection. Paul Industries plans the heat rejection around those limits from the start.
Does Paul Industries take cooling plant work in Pittsburgh and Southwest Pennsylvania?
Yes. Paul Industries builds and services cooling plants for data centers in Pittsburgh PA and across the southwest, from university research rooms to new campuses on former power plant land. Pittsburgh’s cooler summers, with a July normal high of 83 degrees Fahrenheit, favor water-side economizers, and the region’s water use registers with the state under Act 220 rather than a river basin commission. Winter freeze protection is designed in from the start.
Who installs cooling for data centers near Philadelphia's northern suburbs, the Lehigh Valley and Northeast PA?
Paul Industries installs and services cooling plants from Allentown and Bethlehem to Wilkes-Barre and Scranton. The Lehigh Valley falls under the Delaware commission, while Luzerne and Lackawanna counties fall under the Susquehanna commission’s 20,000 gallon consumptive use threshold, so two halls an hour apart can need very different heat rejection. Paul Industries models water and energy for each option before the design is fixed.
Where are the data centers in PA, and does the region change the cooling design?
Announced and operating halls sit in Philadelphia and its suburbs, the Lehigh Valley, Luzerne County, Lancaster, Pittsburgh and former industrial sites such as Homer City in Indiana County. Region changes the design through climate, with Philadelphia’s July normal high five degrees above Pittsburgh’s, and through water authority, since the Susquehanna and Delaware commissions apply different review thresholds. Paul Industries sizes each plant to its station’s design weather and its water rules.
Does a Pennsylvania data center need river basin approval for its cooling water?
It does once its water use reaches the thresholds. In the Susquehanna basin, consumptive use of 20,000 gallons a day or withdrawals of 100,000 gallons a day, as 30-day averages, need commission approval before the data center operates. In the Delaware basin, withdrawals above 100,000 gallons a day trigger review. Pennsylvania’s Act 220 also requires registration of withdrawals above 10,000 gallons a day. Paul Industries designs the plant with these figures as limits.
Can a large hall stay under the Susquehanna commission's 20,000 gallon threshold?
A large hall can stay under 20,000 gallons a day of consumptive use with closed-loop heat rejection: dry coolers, adiabatic coolers that wet their pads only on the hottest hours, or closed-circuit fluid coolers run dry for most of the year. Warm-water liquid cooling makes this easier because dry coolers can reject the heat without compressors through most of the year. The trade is more cooler surface and fan power, which Paul Industries prices against the water saved.
Are proposed data centers in PA being designed to use less water?
Several proposed data centers in PA have committed publicly to low water use. In Lancaster, the developers of two former printing plant sites told the Susquehanna commission each would average under 20,000 gallons a day, far below the old plants’ allotments of 150,000 and 99,000 gallons. Commitments like that fix the cooling design as closed-loop, and Paul Industries builds dry cooler and hybrid plants to meet them.
Why are new data centers in Pennsylvania going up beside power plants?
Developers of new data centers in Pennsylvania are choosing sites with generation close at hand because grid connections for very large loads take years. Amazon’s Salem Township campus sits beside the Susquehanna nuclear plant, and the Homer City campus pairs a planned gas-fired plant with data center land. For the cooling plant, these sites usually mean large heat rejection yards, careful water planning and phased chiller blocks that follow the power as it arrives.
How are cooling towers kept running through an Erie or Scranton winter?
Towers serving a data center through a northern Pennsylvania winter need basin heaters or an indoor sump, variable-speed fans that slow down rather than stop, a bypass that keeps water flowing over the fill, and heat tracing with insulation on exposed piping. In Erie, snow load and drifting also decide equipment placement and access. Paul Industries designs these provisions with the plant and checks them during winter commissioning.
How much does it cost to run a data center cooling plant in Pennsylvania each year?
At Pennsylvania’s 2024 average retail electricity price of 12.51 cents per kilowatt-hour (EIA), a cooling plant drawing 1,000 kilowatts continuously costs about $1.1 million a year in energy, before demand and capacity charges. Real rates vary by utility and contract. Paul Industries uses the owner’s actual rate and the plant’s measured or modeled draw to price efficiency upgrades against their savings.
Can cooling equipment for a Pennsylvania data center qualify for the state's sales tax exemption?
Pennsylvania’s Computer Data Center Equipment Exemption Program, created by Act 25 of 2021 and run by the Department of Revenue, exempts qualifying equipment used in a data center admitted to the program. Which cooling items qualify depends on the program’s definitions and the site’s standing in it. Paul Industries itemizes equipment, materials and labor separately on request, so the owner can apply the exemption to the items it covers.
What changes when a cooling plant goes into a former steel or printing plant?
A reused industrial building gives a cooling plant heavy floors, substations and sometimes water infrastructure, but each must be proven. Paul Industries checks slab and roof capacity for chillers and coolers, traces old process and fire water lines, confirms whether water allocations carry over, and plans underground piping around buried utilities and soil conditions. New risers and penetrations are routed to suit the existing structure.
What should Pennsylvania owners compare among data center cooling contractors?
Compare how each of the data center cooling contractors under consideration handles the work that decides the outcome: heat rejection selected against the site’s water rules, piping tested and flushed to documented procedures, phased tie-ins into a live plant, and complete turnover records. Paul Industries designs, fabricates, installs and starts up the whole plant under one contract, with one schedule and one set of records.
Do data center cooling companies in Pennsylvania offer supply-only equipment?
Paul Industries offers three routes on a Pennsylvania cooling plant: supply-only packages of chillers, coolers, pumps and prefabricated piping skids for an owner’s installer; design-build, where Paul Industries engineers and builds the plant; and complete installation of an owner’s design. Paul Industries prices each route clearly so the owner can choose.
Are data centers coming to Pennsylvania in numbers that strain cooling equipment supply?
Large campuses announced across Pennsylvania add to national demand for chillers, cooling towers, dry coolers and switchgear, and lead times follow that demand. Paul Industries plans long-lead releases early, sequences the plant so early halls can start on the first equipment blocks, and holds the schedule to the delivered equipment rather than to hopeful dates.
Can an older chilled water plant in a Pennsylvania hall be upgraded while servers run?
Older plants can be upgraded while the hall stays live by adding valved headers and temporary connections, swapping one chiller or cooler at a time, and testing each change before the next. Paul Industries confirms redundancy before each machine comes offline, schedules tie-ins with the operator’s change process, and keeps temporary cooling ready where redundancy is thin.
What do Pennsylvania data center electricity rates mean for a chiller replacement?
Pennsylvania data center electricity rates make the efficiency gap between an old chiller and a new one worth measuring. Paul Industries takes the plant’s run hours, measured kilowatts per ton and the site’s actual rate, calculates the annual savings, and sets them against the cost difference between repair and replacement. The chiller repair route stays on the table where the machine is sound.
What should a Pennsylvania data center send to price a cooling plant?
Send the IT load and how it grows, the redundancy level, the hall’s air or liquid cooling type and supply temperature, the site address so the water authority and weather station can be identified, any water allocation or utility letters, and drawings of the building or site. Paul Industries uses that to propose a plant arrangement, a budget range and a schedule, then a firm price once the scope is set.
Planning a cooling plant for a Pennsylvania data hall?
Send the IT load, redundancy target, site address and any water or utility letters. Call 201-450-8280 or request a quote.
