Paul Industries provides tank fabrication in Massachusetts, building stainless process tanks for biotech, pharmaceutical, food and beverage plants and carbon steel storage tanks for fuel, chemicals and utilities, each designed around the State Fire Marshal’s 502 CMR 5.00 permits, the 527 CMR fire code and MassDEP’s underground tank program. Paul Industries is an East Coast contractor with its headquarters at 256 Shore Drive, Kilmarnock, Virginia, and it builds and installs tanks across the Commonwealth, from Boston Harbor and Kendall Square to Devens, Worcester, Springfield and New Bedford. Design, fabrication, foundations, setting, piping and the permit drawings sit under one contract.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Over 10,000 gallons 502 CMR 5.00 permits from the State Fire Marshal
Construction permit Filed at least 30 days before work starts
Use permit Renewed every five years against an Approved Standard
Underground tanks MassDEP, 310 CMR 80.00, since January 2015
Reviewed November 2026

What does tank fabrication in Massachusetts involve?

Tank fabrication in Massachusetts involves designing, welding, testing and installing atmospheric and low pressure tanks, either built complete and delivered or erected in place, and lining each one up with the state and municipal approvals its size, contents and location trigger. A 2,000 gallon polished stainless buffer vessel in a Cambridge lab building and 30,000 gallons of fuel oil storage at a Worcester hospital share welding methods, yet they answer to very different rules once they hold product.

The general methods, from material choice and head types to shop-built versus field-erected construction and testing, are covered on the national tank fabrication page. This page stays with Massachusetts: the State Fire Marshal’s permit and use-permit cycle for large aboveground storage, fire department permits and municipal licenses under the fire code, MassDEP’s program for underground storage, the fuel terminals around Boston Harbor, the state’s biotech and food plants, and the site conditions that shape how a vessel is built and set here.

Massachusetts storage tank regulations: which program covers your tank?

Massachusetts storage tank regulations split a tank’s obligations among three authorities according to its size, contents and position: the State Fire Marshal for aboveground storage above 10,000 gallons of any fluid other than water, the head of the fire department and the municipal licensing authority for flammable and combustible storage under the fire code, and MassDEP for underground storage tank systems. Many tanks touch two of the three, and process tanks holding water or product below the fire code thresholds may touch none beyond the building code.

Which Massachusetts program applies to which tank
TankGoverning ruleAuthorityWhat it requires
Aboveground tank over 10,000 gallons, any fluid other than waterChapter 148 section 37 and 502 CMR 5.00State Fire MarshalConstruction or maintenance permit before work; use permit renewed every five years
Flammable or combustible liquid storage above the fire code quantities527 CMR 1.00 permit tables, chapter 148 sections 10A and 13Head of the fire department; municipal licensing authorityFire department permit; license for storage on land where the table calls for one
Fuel oil tank serving an oil burner527 CMR 1.00, FP-056 Form 1Head of the fire departmentPermit and certificate of completion, then a final inspection
Underground storage tank system310 CMR 80.00MassDEP; removal permit under 527 CMR 1.00Federal-equivalent design, monitoring and inspections every three years
Open tank, clarifier, plating or quench tank, oil/water separatorExcluded from 502 CMR 5.00Fire code and building code as applicableDesign to the service, permits by contents
Stainless process or water tank inside a plant780 CMR, the State Building CodeBuilding officialStructural support, anchorage and the building permit for the installation

Paul Industries sorts every new unit into these rows at the quotation stage, because the row decides which drawings the owner will need, how far ahead applications go in, and who comes to inspect before the tank is filled. Above ground storage tanks Massachusetts owners add to an existing site can also change the site’s totals under the fire code tables, so the whole inventory is reviewed along with the new unit.

What do the Massachusetts above ground storage tank regulations require above 10,000 gallons?

The Massachusetts above ground storage tank regulations at 502 CMR 5.00 require a permit from the State Fire Marshal before anyone constructs, maintains or uses an aboveground storage tank of more than 10,000 gallons gross capacity holding any fluid other than water, under chapter 148 section 37. The rule counts mounded tanks as aboveground storage, and it excludes open tanks such as clarifiers, open plating, dipping and quenching tanks, and oil/water separators.

The construction permit application goes to the Marshal at least 30 days before construction, with the application form, the fee and the supporting documents in triplicate. Work has to start within six months of the permit and be finished within one year of starting, or the permit expires unless the Marshal grants a written extension, and any change to the submitted details needs the Marshal’s written approval before completion. An applicant may ask for a conference with the Marshal before applying, and on large projects the conference can set stopping points for inspection, with no work on the next phase until the Marshal approves the one before.

The 502 CMR 5.04 construction permit package
DocumentWhat it must showPrepared by
Plot planWater bodies, watercourses and public water supplies on or beside the property; utility lines, cables and pipes, active or inactive; adjacent public or private ways; neighboring buildings and other ASTs; property boundaries and the tank’s distance to them; distance to incompatible materialsMassachusetts registered professional engineer or professional land surveyor
Foundation and footing planConstruction details, foundation dimensions, conclusions of the geotechnical investigation and a statement that the soil can support the footingsEngineer of record with the geotechnical data
Application form and feeOwner, site, tank data and contentsOwner, with the tank data from Paul Industries
Notice of changesAny modification to the submitted details, approved in writing before completionOwner and Paul Industries

The same permit route applies to maintenance, and 502 CMR 5.03 defines maintenance broadly: installing, removing, replacing or penetrating any shell plate, annular plate ring, bottom, roof or weld joint with material larger than 12 inches, or jacking or moving an existing tank. Routine coating upkeep and cleaning sit outside that definition. A new nozzle, a bottom replacement or a relevel after settlement therefore needs a maintenance permit first, and Paul Industries prepares the drawings and data the application calls for along with the repair plan.

Use permits, Approved Standards and the five-year cycle

Use permits under 502 CMR 5.05 are issued every five years, a cycle that began on January 1, 2016, and each is tied to an Approved Standard: the inspection and maintenance standard the owner proposes for the tank and the Marshal approves for the rest of its life, usually a standard adopted by a national body such as API 653, STI SP001 or API 510. The Marshal can increase inspection frequency where public safety calls for it, and changing an Approved Standard needs a fresh application comparing the old and proposed standards.

Steps in a Massachusetts AST use-permit renewal
StepTimingRequirement under 502 CMR 5.05
Inspections under the Approved StandardThrough the five-year termVisual, internal, ultrasonic thickness and integrity inspections as the standard sets
Notice to the MarshalAt least 14 days before the use-permit inspectionLocation, date, time and the inspector’s name and contact details; the Marshal may attend
Use-permit inspectionBefore renewalA Qualified Tank Inspector verifies the required inspections were done and inspects the tank, piping, equipment and dikes
Inspection reportReceived within 14 days after the inspectionReport on the Marshal’s form affirming compliance
DeficienciesRemediation schedule within 30 days unless extendedSchedule approved by the Marshal, with updates as work proceeds
Leaks or hazardsImmediatelyWritten notice to the Marshal under 502 CMR 5.06

502 CMR 5.03 recognizes several kinds of Qualified Tank Inspector, including a Massachusetts registered professional engineer, an API 653 inspector, an STI SP001 inspector, an ASME pressure vessel inspector holding a National Board commission and an FRPI inspector for fiberglass tanks. Paul Industries prepares each AST for that inspection, cleaning and opening it where the standard calls for an internal look, and then carries out the bottom, shell, roof, nozzle and coating repairs the report lists, under a maintenance permit where the work meets the definition.

Fire department permits and licenses under 527 CMR 1.00

Fire department permits for tanks in Massachusetts come from 527 CMR 1.00, the Massachusetts Comprehensive Fire Safety Code, whose Chapter 1 tables list the quantities of flammable and combustible liquids that need a permit from the head of the fire department under chapter 148 section 10A and, above higher quantities, a license for storage on land from the municipal licensing authority under section 13. The permit and the license are separate approvals, and both are needed where the table calls for both.

The fire code also carries the fuel oil burner route. The state form FP-056 Form 1 serves as application, permit and completion certificate in one document for oil burner installations and alterations together with their fuel supply, which brings in the supply tanks for oil-fired boilers and many generator systems. Older references to 527 CMR 9.00 point to the former tank rules, which were rescinded in January 2015 when MassDEP adopted its own underground tank regulations, and fuel storage tank regulations for aboveground tanks now sit in 527 CMR 1.00 and, above 10,000 gallons, 502 CMR 5.00. Fuel tanks for boiler plants are often replaced together with the boilers they feed, covered on boiler repair in Massachusetts.

Massachusetts underground storage tank regulations and the move above grade

Massachusetts underground storage tank regulations are MassDEP’s 310 CMR 80.00, in effect since January 2015 and amended in October 2021 to be at least as stringent as the federal rules in 40 CFR 280 and 281. The Massachusetts underground storage tank program moved from the Department of Fire Services to MassDEP in 2009, and the fire service kept the permit to remove an underground tank in 527 CMR 1.00. Inspections every three years are carried out under MassDEP’s inspector program.

Massachusetts UST regulations, with their monitoring, testing and inspection duties, push many owners to replace an aging underground tank with an aboveground one when it reaches the end of its life. The aboveground route trades underground monitoring for visible, inspectable steel, at the cost of space, protection from vehicles and, above 10,000 gallons, the State Fire Marshal’s permit cycle. Paul Industries designs replacement aboveground tanks with secondary containment, overfill protection, vents and piping that suit the site, and builds them as double-wall tanks for smaller volumes or as API 650 tanks inside a dike for larger ones.

Fuel storage along Chelsea Creek and Boston Harbor

Fuel storage along Chelsea Creek and the Chelsea River centers on bulk terminals in Chelsea, Revere and East Boston that store gasoline, diesel, jet fuel and fuel oil under EPA discharge permits, and one terminal delivering jet fuel to Logan Airport by a dedicated pipeline. Field-erected storage at terminals like these is classic API 650 construction, and their bottoms, shells and floating roofs are maintained under API 653.

The Massachusetts AST regulations treat any work that cuts or replaces more than 12 inches of shell, bottom, annular ring or roof, or that jacks a tank, as maintenance needing a permit, and harbor sites add tight plot plans, adjacent waterways and utilities that the plot plan must show. Paul Industries builds new storage, replaces bottoms and shell courses, adds nozzles and modernizes vents and overfill protection at terminals and at the fuel farms of hospitals, universities and utilities around the harbor, working inside the site’s own safety and hot work rules.

Stainless steel tank fabrication for Massachusetts biotech and food plants

Stainless steel tank fabrication for Massachusetts biotech and food plants covers media and buffer preparation tanks, harvest and hold tanks, purified water and WFI storage, CIP supply and return tanks, and mix, hold and batch tanks in dairies, breweries, bakeries and seafood plants. Biologics and cell therapy plants in Cambridge, Lexington, Waltham, Devens, Norwood and Framingham specify ASME BPE finishes, sloped bottoms, sanitary nozzles and full documentation.

Paul Industries builds sanitary tanks with polished or electropolished product contact surfaces, orbital or manual welds finished and inspected to the owner’s specification, and passivation recorded for the turnover package, and connects them with sanitary piping and spray devices. Food and seafood plants on the South Coast, around New Bedford and Fall River, and food and beverage plants in Worcester, Springfield and the Pioneer Valley use the same methods with finishes and documentation matched to food service. Where a tank is pressure rated, for vacuum or steam sterilization, it is built as a code vessel, covered on pressure vessel fabrication in Massachusetts, and finishing work is described on passivation services in Massachusetts. Tanks feeding purified water loops connect to the systems on high-purity water systems in Massachusetts, and their sanitary connections to sanitary process piping in Massachusetts.

Shop-built or field-erected: getting a tank onto a Massachusetts site

Getting a tank onto a Massachusetts site is often the deciding factor between building it complete and delivering it or erecting it in place, because road limits, narrow urban streets, older buildings and tight harbor sites restrict what can arrive in one piece. Smaller stainless and carbon steel units are built complete, tested and delivered; large storage is erected on its foundation from rolled plate.

Design loads come from 780 CMR, the State Building Code, whose tenth edition is based on the 2021 International Building Code and has been the sole edition in force since June 30, 2025. Outdoor units carry wind and snow loads and seismic anchorage, and those in flood-prone coastal areas need anchorage against flotation when empty. Foundations for large storage begin with a geotechnical investigation, which the 502 CMR 5.04 permit package requires in any case, and the bottom, annular ring and leak detection details are set together with the foundation. Paul Industries designs the shell, foundation interface, anchorage and access platforms as one package, and plans rigging, crane and delivery routes before fabrication starts.

Temporary, decommissioned and abandoned tanks in Massachusetts

Massachusetts defines three states of a large aboveground tank’s life outside normal use, and each affects what can be done with the steel. Under 502 CMR 5.03, a temporary installation is one in use for less than six months from the date it was installed; a decommissioned unit has been taken out of service with no use or activity, with the intention of returning it to service later, and cannot be filled with any fluid other than water without a new permit application; and an abandoned unit has been out of service for more than 60 months and has been judged unsafe and a threat to public safety by the head of the fire department and the Marshal.

Those definitions matter when an owner plans to reuse old storage rather than buy new. A decommissioned AST that is brought back needs its condition established, and a suitability assessment is the regulation’s tool for that, which the regulation describes as a written evaluation by a Massachusetts registered professional engineer that the vessel is sound and acceptable for the intended product. Paul Industries carries out the inspection openings, thickness readings, bottom and shell repairs and nozzle changes that such a return to service calls for, and supplies the repair records the engineer and the Marshal review.

Coatings, linings and coastal corrosion

Coatings, linings and corrosion allowance decide how long carbon steel storage lasts in Massachusetts, where salt air along Boston Harbor, the North and South Shores and Buzzards Bay attacks exterior steel and where winter freeze and thaw cycles work moisture into insulation and under bottoms. Internal linings protect bottoms from water that settles out of fuel, and cathodic protection or a double bottom with leak detection protects the underside on field-erected storage.

Stainless process vessels face a different enemy: chlorides from cleaning chemicals, de-icing salt carried in on boots and vehicles, and coastal air, which can cause pitting and stress corrosion cracking at welds and under insulation. Paul Industries selects grades, finishes and insulation details with that exposure in mind, specifies coating systems for carbon steel by service, and records coating and lining inspections so the Approved Standard inspections that follow have a baseline.

What does tank fabrication in Massachusetts cost?

Tank fabrication in Massachusetts costs what the tank’s size, material, finish, construction method and permit package dictate, with site access, foundations and the State Fire Marshal’s permit steps adding to the price of large storage. Storage tank requirements written into the specification at the start, such as containment, overfill protection and inspection access, cost far less than additions made after delivery.

What moves the price of a Massachusetts tank project
FactorEffect on priceWhat to send Paul Industries
Size and construction methodDelivered tanks favor shop efficiency; field erection adds site labor, cranes and weather timeCapacity, preferred diameter and height, site access limits
Material and finishStainless grades, polished finishes and passivation raise material and laborContents, temperature, finish and cleaning method
Containment and safeguardsDouble wall, dikes, overfill protection, vents and gaugingContents classification and existing containment
FoundationGeotechnical work, ring walls or slabs, anchorageAny existing soils report and the proposed location
Permit packagePlot plan, foundation plan, 30-day lead time and inspection stopping points for tanks over 10,000 gallonsSite plan and the permits already held
Work at an operating siteHot work rules, tie-ins and shutdown windowsShutdown dates and site safety requirements

Paul Industries offers a budget range from comparable work once the contents, capacity and site are known, then a firm price once the design and the permit route are settled.

Who fabricates tanks in Massachusetts?

Paul Industries fabricates tanks in Massachusetts, designing and building stainless process tanks and carbon steel storage tanks, setting or erecting them, connecting their piping and preparing the drawings and data behind each Massachusetts permit. Headquartered on Shore Drive in Kilmarnock, Virginia, after earlier bases in northern New Jersey and then Pennsylvania, Paul Industries builds for owners in all 50 states.

When plants compare tank fabrication companies, or the stainless steel tank fabricators that serve biotech and food plants, the useful questions concern the whole job: whether design, fabrication, foundation interface, setting, piping and the permit drawings sit under one contract; whether the finish and documentation match the plant’s quality system; and whether later inspections and repairs under the Approved Standard run through the same records. Paul Industries covers each of them in one scope. Among tank fabricators working the East Coast, Paul Industries carries the same approach on tank fabrication in Virginia in its headquarters state, on tank fabrication in New York and on tank fabrication in New Jersey, and across the Northeast.

Tank fabrication and installation from Paul Industries in Massachusetts

Paul Industries designs, fabricates, delivers, erects, sets and connects tanks for Massachusetts owners: sanitary process tanks, purified water and WFI storage, CIP tanks, mix and hold tanks, fuel oil and diesel storage, generator day and supply tanks, chemical storage and field-erected bulk storage. Paul Industries also repairs, modifies and relocates existing tanks, replaces bottoms and shell courses, and adds nozzles, vents and overfill protection, with permit drawings prepared for each step. Owners can choose supply of the tank alone, a design-build package, or complete installation with foundations, piping and startup. Process connections are covered on process piping in Massachusetts, and the wider picture of Paul’s work in the state is on the Massachusetts page. The simplest first step is to request a quote listing what the vessel will hold, its size, its site and the approvals in hand.

Standards referenced: Massachusetts General Laws chapter 148 sections 10A, 13 and 37 · 502 CMR 5.00 Permit and Inspection Requirements of Above Ground Storage Tanks of More than Ten Thousand Gallons Capacity · 527 CMR 1.00 Massachusetts Comprehensive Fire Safety Code · 310 CMR 80.00 Underground Storage Tank Systems · 780 CMR Massachusetts State Building Code, tenth edition · API 650 · API 653 · STI SP001 · ASME BPE · ASME Section IX

Frequently asked questions

Who builds fuel storage tanks for terminals and plants along Chelsea Creek and Boston Harbor?

Paul Industries builds and repairs fuel storage tanks for terminals, utilities, hospitals and universities along Chelsea Creek, East Boston, Revere and the rest of Boston Harbor, from new API 650 tanks to bottom and shell course replacements, nozzle additions and overfill protection upgrades. Paul prepares the plot plan and foundation data the State Fire Marshal’s permit calls for on tanks over 10,000 gallons and works within each site’s hot work rules.

Does Paul Industries fabricate stainless process tanks for biotech plants in Cambridge, Devens and along I-495?

Paul Industries fabricates stainless process tanks for biotech and pharmaceutical plants in Cambridge, Kendall Square, Lexington, Waltham, Devens, Marlborough, Andover and Framingham, including media and buffer tanks, harvest tanks, CIP tanks and purified water and WFI storage. Each tank carries ASME BPE finishes where specified, sanitary nozzles and the weld, finish and passivation records a GMP turnover package needs.

Who supplies tanks to food and beverage plants in Worcester, Springfield and the Pioneer Valley?

Paul Industries supplies and installs mix, hold, batch and CIP tanks for food and beverage plants in Worcester, Springfield, Holyoke, Chicopee and across the Pioneer Valley, along with fuel and water storage for the same sites. Tanks are built complete and delivered where access allows, and Paul plans rigging into older buildings before the tank dimensions are fixed.

Which tanks does Paul Industries build for seafood processors in New Bedford and Fall River?

Seafood processors around New Bedford, the top US port by landed value, and Fall River use stainless brine, wash water, cooking and CIP tanks, along with fuel and refrigerant storage. Paul Industries builds those tanks in stainless with finishes suited to food contact and salt exposure, and installs them with their piping, supports and cleaning connections.

What do Massachusetts UST regulations require, and who runs the program?

MassDEP runs the program under 310 CMR 80.00, in effect since January 2015 and amended in October 2021 to be at least as stringent as the federal underground tank rules. Owners maintain monitoring and testing and have their systems inspected every three years under MassDEP’s inspector program, while the permit to remove a tank stays with the fire service under 527 CMR 1.00. Paul Industries builds aboveground replacements when owners move storage above grade.

Do Massachusetts oil tank regulations apply to a generator day tank?

A generator day tank is governed by its size and contents. Day tanks and supply tanks for oil and diesel fall under the fire code, 527 CMR 1.00, with permits from the head of the fire department and, above the table quantities, a municipal license, while aboveground tanks over 10,000 gallons also need the State Fire Marshal’s permits under 502 CMR 5.00. Paul Industries builds day and supply tanks with the containment, vents and gauging those rules expect.

Which regulations for above ground fuel storage tanks apply at a Massachusetts hospital?

Hospital fuel oil and diesel tanks follow 527 CMR 1.00 for permits and, where the quantities call for it, a storage license from the city or town, FP-056 Form 1 for tanks serving oil burners, and 502 CMR 5.00 for any aboveground tank over 10,000 gallons. Paul Industries designs replacement tanks around the hospital’s emergency power and boiler plant so fuel stays available during the changeover.

How far ahead must a 502 CMR 5.00 construction permit be applied for?

The application goes to the State Fire Marshal at least 30 days before construction, with the form, fee, a plot plan by a Massachusetts registered professional engineer or land surveyor and a foundation plan with geotechnical conclusions, all in triplicate. Work must start within six months of the permit and finish within a year of starting. Paul Industries supplies the tank data and drawings for the package.

Does relocating or jacking an existing Massachusetts tank need a State Fire Marshal permit?

For an aboveground tank over 10,000 gallons holding a fluid other than water, 502 CMR 5.03 counts jacking or moving the tank as maintenance, and maintenance needs a permit before it starts. Releveling after settlement, bottom replacement and relocation within a site all fall in that category. Paul Industries plans the lift, prepares the permit data and restores the tank to its Approved Standard afterward.

Which repairs count as maintenance under 502 CMR 5.00?

Maintenance means installing, removing, replacing or penetrating any shell plate, annular plate ring, bottom, roof or weld joint with material larger than 12 inches, or jacking or moving the tank. Routine coating upkeep and cleaning, including removal of light surface oxidation, sit outside the definition. Paul Industries scopes repairs from the inspection report and identifies which items need a maintenance permit.

Who can inspect a large Massachusetts AST for its use permit?

502 CMR 5.03 names the Qualified Tank Inspector routes: a Massachusetts registered professional engineer, an API 653 inspector, an STI SP001 inspector, an ASME pressure vessel inspector holding a National Board commission, an FRPI inspector for fiberglass tanks, or an alternative the Marshal approves. Paul Industries opens, cleans and prepares the tank for that inspection and completes the repairs it calls for.

What happens if a use-permit inspection finds deficiencies?

The owner submits a remediation schedule within 30 days unless the Marshal extends that time, and the Marshal approves it and receives updates as the work proceeds. Deficiencies that pose a serious threat to public safety or the environment are reported to the Marshal at once, and the Marshal may require a schedule for repair or decommissioning. Paul Industries prices and schedules the repairs to fit the approved timeline.

Do open process tanks and oil/water separators fall under 502 CMR 5.00?

Open tanks such as clarifiers, open tanks used for plating, dipping and quenching, and oil/water separators are excluded from 502 CMR 5.00. They still follow the fire code where their contents are flammable or combustible, and the building code for support and anchorage. Paul Industries designs and builds open process tanks to their service, with the materials and coatings their contents need.

Should a Massachusetts plant replace an underground tank with an aboveground one?

Moving above grade replaces underground monitoring and three-year inspections with visible, inspectable steel and simpler leak detection, at the cost of space, vehicle protection and, above 10,000 gallons, the State Fire Marshal’s permit cycle. Sites with room and short piping runs often favor aboveground tanks. Paul Industries compares both options for the site and builds the aboveground replacement with containment and overfill protection.

What design loads does an outdoor tank in Massachusetts carry?

Outdoor tanks are designed for wind, snow and seismic loads under 780 CMR, the State Building Code, with anchorage that resists overturning and, in flood-prone coastal areas, flotation when the tank is empty. Product weight, internal pressure or vacuum and nozzle loads complete the design. Paul Industries designs the tank, anchorage and foundation interface together.

How long does a 502 CMR 5.00 use permit last?

Use permits are issued for five years, a cycle that started on January 1, 2016, and each renewal depends on inspections carried out under the tank’s Approved Standard and a use-permit inspection by a Qualified Tank Inspector, with the Marshal notified 14 days ahead and the report filed within 14 days after. Paul Industries keeps repair records aligned with that cycle.

What does Paul Industries need to quote a tank for a Massachusetts site?

Send the contents and their temperature, capacity, preferred dimensions, material and finish, nozzle list, indoor or outdoor location, the town and site plan, any soils information, and the permits already held for the site. Paul Industries returns a budget range from comparable tanks, then a firm price once the design and the permit route are settled.

Planning a new or replacement tank in Massachusetts?

Send the contents, capacity, material, location and site plan, plus any permits already in place. Call 201-450-8280 or request a quote.