Paul Industries provides industrial welding services in Rhode Island for process and utility piping, sanitary and high-purity tube, boiler and pressure vessel repairs, structural steel, equipment frames and thermoplastic tanks and ducts, at biologics plants, Quonset Business Park tenants, metal finishers, food plants, hospitals and universities. Every weld is made to a written procedure qualified under ASME Section IX, AWS D1.1 or the thermoplastic standards, with the examination, hot work and state notice steps Rhode Island attaches to it. Plants can take welded assemblies supply-only, a design-build package or complete field installation from Paul Industries, headquartered at 256 Shore Drive, Kilmarnock, Virginia.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Pipe welding license class Welding limited license, 260-RICR-30-15-2, section 2.22(B)
Boiler and vessel repairs Notice before welding, NBIC form after, R.I. Gen. Laws 28-25-10(c)
Repair code National Board Inspection Code, 2025 edition
Hot work NFPA 1, 2021 edition, Chapter 41, in force March 1, 2026
Reviewed November 2026

Industrial welding services in Rhode Island across pipe, tube, plate and plastic

Industrial welding services in Rhode Island cover four families of work that each follow a different rulebook: piping and tubing in process and utility service, repairs and alterations to boilers and pressure vessels, structural steel and equipment supports, and thermoplastic fabrication for the state’s plating and finishing trade. A single plant project often touches all four, for example a new rinse line in polypropylene, a stainless feed line, a steel platform to reach it and a repair to a jacketed tank.

The national industrial welding services page explains processes, materials and examination methods in general. This page concentrates on industrial welding, Rhode Island style: where the work sits in the state, the state rules that reach a welder on pipe, the boiler law’s notice requirement, the fire code that took effect in March 2026, and the plastic welding that the finishing industry runs on.

Welding work at Rhode Island plants, by family
Family of workTypical processesGoverning codeWhere it comes up in Rhode Island
Process and utility pipeGTAW root with GTAW or SMAW fill and cap; GMAW and FCAW on larger carbon steelASME B31.3 or B31.1 with Section IX qualificationsQuonset tenants, Blackstone Valley plastics and materials plants, hospital steam plants
Sanitary and high-purity tubeAutogenous orbital GTAW with inert back purgeASME BPE, AWS D18.1 where the owner names itWest Greenwich biologics, food and beverage plants, university laboratories
Boiler and pressure vessel repairSMAW and GTAW to the original material and thicknessNBIC 2025 under R.I. Gen. Laws 28-25-10Steam plants, autoclaves, air receivers and jacketed process vessels statewide
Structural steel and equipment supportsFCAW, GMAW and SMAW in the fieldAWS D1.1, D1.6 for stainless, IBC Chapter 17 special inspectionPlatforms, pipe racks, crane rail supports and machine bases
ThermoplasticsHot gas, extrusion and butt fusion weldingAWS B2.4 and DVS 2212 qualification, the owner’s chemical resistance dataPlating tanks, scrubbers, fume ducts and chemical drains in Providence, Cranston and Pawtucket

Rhode Island welding by region: Quonset, Providence, Kent County and the Blackstone Valley

Rhode Island welding work is concentrated at Quonset Point in North Kingstown, in the finishing and metals district around Providence, at the biologics campus in West Greenwich and in the mill-town manufacturing plants of the Blackstone Valley. The facilities named below are facts about the market for welding in Rhode Island and are named for that reason.

Quonset Point: submarine modules and shipbuilding

Rhode Island submarine welding happens at General Dynamics Electric Boat’s Quonset Point facility, where steel is cut and welded into modules for Virginia-class submarines; about 6,800 people worked there, according to July 2025 reporting. Senesco Marine, also at Quonset, won a $78.6 million contract in November 2025 to build a hybrid ferry for 400 passengers and 75 cars, with completion targeted for summer 2029. Around those yards sit 252 companies across the 3,200-acre business park. For park tenants, the plant welding is utility and equipment work: compressed air and gas headers, cooling water, steam and condensate, equipment frames, platforms, crane rail supports and the repair of worn fixtures and handling gear. Paul Industries welds that plant infrastructure.

Industrial welding, Providence, RI finishers and hospitals

Welding in Providence splits between metal and plastic. The finishing shops descended from the jewelry trade run plating and rinse tanks, fume scrubbers and chemical drains in polypropylene, PVDF and CPVC, with stainless and titanium heat exchangers and steel tank stands beneath them. Hospitals and universities in Providence run steam, condensate and heating water systems that call for carbon steel pipe welding during heating plant outages, and research buildings need stainless tube for RO water and process gases. Paul Industries welds across that range, metal and thermoplastic.

West Greenwich and Kent County: orbital tube

Biologics welding in West Greenwich and Kent County is orbital welding on electropolished 316L tube. Each weld is made by an orbital machine to a qualified schedule, numbered on the weld map, inspected inside by borescope, and logged with coupon results from the start of each shift and each change of tube heat or electrode. Coupons are judged for full penetration, color from residual oxygen, concavity and alignment against the BPE acceptance criteria. That record feeds the qualification package described on the process piping in Rhode Island page.

Blackstone Valley and Warwick manufacturing plants

Plants in Woonsocket, Lincoln, Cumberland, Smithfield and Warwick run plastics, textiles, materials and food production in buildings that have been rebuilt many times. The welding there is repair and alteration: new pipe branches on old headers, worn conveyor and machine frames, cracked brackets and bases, hoppers and chutes, and stainless repairs on food equipment. Each repair starts by identifying the base metal, because a century-old mill building can hold cast iron, wrought iron, early carbon steel and modern alloys within a few feet of each other.

Is there a Rhode Island welding certification for pipe work?

Rhode Island ties welding on pipe systems to its mechanical trades rules. Under section 28-27-28, installing or repairing process piping, power piping and piping that carries liquids, solids or industrial gases is work that needs a state license, and the Department of Labor and Training’s pipefitter rule creates a welding limited license for welding of pipe, hangers and supports for pipe systems. An applicant shows proof of passing a recognized welding class, such as an ASME test or equivalent, and works under a Pipefitter Master I or II. The Journeyperson Class I pipefitter license also expects experience in cutting and welding.

The state license is one layer. The code layer comes from the construction code for each weld: ASME Section IX welding procedure specifications backed by procedure qualification records, and a welder performance qualification for each process, position and thickness range. Under Section IX a welder’s qualification lapses after six months without welding in that process, so continuity logs belong in every turnover package. Structural welds qualify to AWS D1.1, stainless structural welds to AWS D1.6, and thermoplastic welders to AWS B2.4 or DVS 2212. Rhode Island welders working on pipe therefore carry both the state license class the rule requires and the code qualifications the work requires.

Qualifications a Rhode Island plant job calls for, by weld
WeldState ruleCode qualificationRecord in the turnover
Process or power pipe and its supportsMechanical trades license under 28-27-28; welding limited license under 260-RICR-30-15-2ASME Section IX WPS, PQR and welder qualificationWeld map, welder ID per joint, continuity log, examination reports
Boiler or pressure vessel repairNotice before work and NBIC form after, 28-25-10(c)Section IX qualifications under the NBIC repair programNBIC R form, inspector acceptance, test record
Structural steelRISBC-1 (2021 IBC) special inspectionAWS D1.1 or D1.6 procedures and weldersSpecial inspection reports, welder certificates of test
Thermoplastic exhaust ductSynthetic exhaust ducting limited license with a plastic welding certification programAWS B2.4 or DVS 2212Weld parameter logs and spark or visual test records
Sanitary tubeMechanical trades license where the tube is process pipingSection IX with ASME BPE or AWS D18.1 acceptanceOrbital weld logs, coupons, borescope video or stills

How does a welded boiler or vessel repair work under Rhode Island law?

A welded boiler or pressure vessel repair in Rhode Island starts with notice: section 28-25-10(c) of the General Laws requires the organization performing the repair or alteration to notify the Division of Occupational Safety’s boiler unit or an authorized inspector before any welded repair or alteration begins, and to file the completed NBIC repair or alteration form when the work is done. New construction follows the ASME code and repair or alteration work follows the NBIC, under section 28-25-10(d), and the boiler unit’s rule, amended effective December 24, 2025, incorporates the 2025 editions of both.

The rule separates a repair, which restores a unit to a safe condition with no deviation from its original design, from an alteration, which changes the design, such as a higher maximum allowable working pressure or design temperature. Repairs are made to the 2025 NBIC under the National Board R program, an ASME certificate within its quality control system or chief inspector authorization, and alterations under an ASME certificate of authorization; the state fee schedule lists a $100 repair and alteration permit. Paul Industries plans the inspector’s hold points into the outage: the defect is mapped and the repair method agreed, the excavation is examined before welding, the weld is made to a qualified procedure, examined and pressure tested where the inspector calls for it, and the form is filed. Boiler work is covered further on the boiler repair in Rhode Island page, and new vessels on the pressure vessel fabrication in Rhode Island page.

Hot work permit, Rhode Island fire code and NFPA 1 Chapter 41

The Rhode Island fire code governing welding in occupied plants is NFPA 1, Fire Code, 2021 edition with state amendments, in force since March 1, 2026 as 450-RICR-00-00-7. Its Chapter 41 sets the hot work rules, drawn from NFPA 51B: a written permit from the permit authorizing individual before work starts, combustibles within 35 feet moved or shielded, openings in walls and floors within that distance covered, a fire watch with extinguishing equipment during the work and for a set time after it ends, and a final check of the area. The one Rhode Island change to Chapter 41 adds blacksmith operations, forging and related historical practices to the work it covers.

Finishing shops and food plants raise particular hot work questions. Plating areas hold solvents, polypropylene tanks and ductwork that burn readily, so tanks are drained or shielded and ducts isolated before welding close by; food plants hold packaging, cardboard and edible oils, and sanitation crews use flammable cleaners. Paul Industries prepares the hot work permit with the plant, sets the fire watch and keeps hot work on a running line to the windows the plant approves, so a hot work permit, Rhode Island fire code check and plant sign-off are in hand before the first arc.

Thermoplastic welding for plating tanks, scrubbers and ducts

Thermoplastic welding joins polypropylene, polyethylene, PVDF and PVC by melting the parent material, and it is the welding the Rhode Island finishing trade depends on most. Tanks and scrubber housings are extrusion welded, with the fillet laid by a hand extruder over a pre-heated, beveled joint; small repairs and ductwork joints are hot gas welded with a filler rod of the same polymer; pipe is joined by butt fusion or socket fusion to a temperature, pressure and time schedule. Each method has its own qualification under AWS B2.4 or DVS 2212.

The state’s pipefitter rule covers this work too: a synthetic exhaust ducting limited license covers plastic exhaust ducting outside heating and air conditioning systems and calls for a certificate from a plastic welding certification program. A cracked tank wall or a leaking weld seam is repaired by grinding out the crack to sound material, drilling crack-stop holes at each end, re-welding with matched filler, and spark testing the seam where the polymer allows. Chemical tanks and their supports are covered on the tank fabrication in Rhode Island page, and line treatments for finishing equipment on the passivation in Rhode Island page.

Structural welding, RI special inspection and AWS D1.1

For structural welding, Rhode Island applies RISBC-1, the 2021 International Building Code with state amendments in force since December 1, 2025. Chapter 17 of that code calls for special inspection of structural steel welding, which points to the quality assurance provisions of AISC 360 and to AWS D1.1 for procedures, welder qualifications and acceptance criteria. Platforms, mezzanines, pipe racks and crane supports added to an existing building carry that inspection, along with the engineer’s drawings and the permit.

Paul Industries welds new steel to existing members after checking the existing steel’s weldability, because older buildings in Providence and the Blackstone Valley can hold steel with higher carbon content that needs preheat. Fillet sizes, electrode classifications and preheat are taken from the engineer’s details and AWS D1.1 tables, and every connection is presented to the special inspector with welder identification and visual inspection records.

Welding stainless near salt water and inside clean suites

Stainless welding near Narragansett Bay and inside clean suites shares one requirement: protect the chromium oxide layer that keeps the steel from corroding. Inside the joint, an inert back purge keeps heat tint off the root, with oxygen measured at the purge exit before the arc starts; outside, heat tint is removed mechanically or chemically and the surface is passivated. Exposed stainless at Quonset, East Providence and Newport sites shifts from 304 to 316L where salt deposits and wet-dry cycles make chloride pitting likely.

Inside gowned suites, welding follows the plant’s contamination controls: tools wiped down and bagged, grinding replaced where practical by cutting methods that leave less debris, point exhaust at the arc, and particle counts checked before the room returns to classified status. Paul Industries schedules that work with the plant’s environmental monitoring and qualification teams.

Weld examination records a Rhode Island plant files after the job

Weld examination at Rhode Island plants follows the examination level the construction code assigns, and the records belong to the owner. ASME B31.3 normal fluid service calls for visual examination of all welds and random radiographic or ultrasonic examination of at least 5 percent of circumferential butt welds, with progressive examination when a sample fails; severe cyclic, Category M and high-pressure service raise the percentage. B31.1 sets examination by pressure and temperature, and the NBIC lets the inspector set it for each repair.

Weld examination methods and what each record shows
MethodWhat it findsWhere it is used
Visual examinationUndercut, porosity at the surface, profile, size, alignmentEvery weld under every code
RadiographyInternal porosity, slag, lack of fusion, incomplete penetrationB31.3 random examination, B31.1 girth welds, vessel repairs
Ultrasonic examinationPlanar flaws through thickness, in place of radiography where the code allowsHeavy wall pipe, structural complete joint penetration welds
Magnetic particle and liquid penetrantSurface and near-surface cracksExcavations before repair welding, fillet welds, stainless and nonferrous surfaces
Borescope and couponsRoot color, penetration, concavity, misalignmentOrbital welds on high-purity and sanitary tube
Spark testingPinholes and voids in plastic weldsThermoplastic tank and liner seams

Cold, damp and coastal weather on outdoor welds

Outdoor welding in Rhode Island has to manage cold base metal in winter, wet salt air off the bay most of the year, and wind on exposed waterfront racks. AWS D1.1 bars welding when the ambient temperature is below 0 F and calls for base metal below 32 F to be preheated to at least 70 F and held there through welding; heavier sections and higher-strength steels carry larger preheat values from the code’s tables. ASME B31.3 and Section VIII set preheat by material group and thickness, and the welding procedure records the minimum.

Moisture is the second concern. Low-hydrogen electrodes are kept in heated holding ovens and returned within the exposure time the code allows, because hydrogen picked up from damp air causes delayed cracking in carbon and low-alloy steel. Joint surfaces are dried with a torch or heater before welding, condensation on cold pipe is driven off, and gas-shielded processes are screened from wind with tents or barriers so the shielding gas stays over the puddle. On waterfront sites at Quonset, East Providence and Newport, salt deposits are washed and dried from the joint area before welding, since chlorides left on the surface promote porosity and later pitting.

Paul Industries plans outdoor work around those controls rather than around the calendar: heating, tenting and electrode storage go into the job plan, the welding procedure carries the preheat and interpass limits, and temperature-indicating crayons or contact thermometers confirm them at the joint. Weld examination follows as it would indoors, with records kept for each joint.

How much do industrial welding services in Rhode Island cost?

Industrial welding services in Rhode Island are priced on the material and thickness, the process and position, the examination level, the hold points an inspector sets, access and rigging, hot work controls and fire watch, cleanliness requirements and the windows production allows. An orbital weld on electropolished tube with borescope records costs more per joint than a fillet on a steel bracket, and a boiler repair carries the cost of the inspector’s visits and the NBIC paperwork. Public contracts over $1,000 pay prevailing wages under section 37-13-7, at rates set by the director of labor and training.

Paul Industries quotes welding as a fixed scope where the joints can be counted, or as a planned outage package where the work is discovered as equipment is opened. A budget from comparable work comes first, then a firm number once drawings, materials, codes and access are confirmed.

Who provides industrial welding services in Rhode Island?

Paul Industries provides industrial welding services in Rhode Island under one contract that covers procedures and welder qualifications, fabrication, field welding, examination, testing, state notices and the records at the end. Its headquarters are at 256 Shore Drive, Kilmarnock, Virginia. Formerly based in northern New Jersey, then Pennsylvania, the company is an East Coast contractor that accepts welding work throughout Rhode Island and in every one of the 50 states, as well as at plants beyond the United States. The headquarters state is covered on the industrial welding services in Virginia page, and the neighboring states on industrial welding services in Massachusetts and industrial welding services in Connecticut, with the region on the New England page.

When engineers compare welding services, Rhode Island plants are best served by judging the paperwork at the end: procedures and qualification records matched to every welder who worked the job, weld maps, examination reports, state notices and NBIC forms for any boiler or vessel repair, and hot work permits for each day. Paul Industries assembles that record for every job.

Welding from Paul Industries for Rhode Island plants

Paul Industries handles industrial welding from procedure to records for biologics and pharmaceutical plants, Quonset tenants, metal finishers, food and beverage producers, plastics and materials plants, hospitals, universities and laboratories, from Providence, Pawtucket and Central Falls to Cranston and Warwick, East Providence, the Blackstone Valley towns of Woonsocket, Lincoln and Smithfield, Kent County and West Greenwich, Quonset and North Kingstown, Aquidneck Island and Westerly. More on the state is on the Rhode Island page. Send drawings or photos, materials and the codes involved, then call 201-450-8280 or request a quote.

Standards referenced: ASME Boiler and Pressure Vessel Code, Section IX · ASME Boiler and Pressure Vessel Code, 2025 edition (as incorporated in 260-RICR-30-10-2) · National Board Inspection Code, 2025 edition · ASME B31.3 Process Piping · ASME B31.1 Power Piping · ASME BPE Bioprocessing Equipment · AWS D1.1 Structural Welding Code, Steel · AWS D1.6 Structural Welding Code, Stainless Steel · AWS D18.1 Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary Applications · AWS B2.4 Welding Procedure and Performance Qualification for Thermoplastics · DVS 2212 qualification of plastics welders · AISC 360 Specification for Structural Steel Buildings · NFPA 1 Fire Code, 2021 edition (Rhode Island Fire Code, 450-RICR-00-00-7) · NFPA 51B Fire Prevention During Welding, Cutting and Other Hot Work · RISBC-1 Rhode Island Building Code (2021 IBC) · R.I. Gen. Laws Chapter 28-25 (boilers and pressure vessels) · R.I. Gen. Laws Chapter 28-27 and 260-RICR-30-15-2 (mechanical trades) · R.I. Gen. Laws 37-13-7 (prevailing wage)

Frequently asked questions

Who handles plant welding for Quonset Business Park tenants in North Kingstown?

Paul Industries welds compressed air and gas headers, cooling water and steam piping, equipment frames, platforms, crane rail supports and worn handling fixtures for manufacturers and marine industry tenants at the Quonset Business Park and across North Kingstown. Exterior work on the waterfront is detailed for salt air, and hot work is planned around production bays and crane schedules.

Does Paul Industries weld for finishing and metals shops in Providence, Cranston and East Providence?

Yes. Paul Industries welds polypropylene, PVDF and CPVC tanks, scrubbers, ducts and drains, and the stainless and carbon steel stands, heat exchanger connections and piping beneath them, for plating, polishing and coating shops in Providence, Cranston, East Providence and Pawtucket. Repairs are planned around production so a line returns to service with its tanks spark tested and its drains leak checked.

Which welding work do biologics plants in West Greenwich and Kent County need?

Biologics plants in West Greenwich, Coventry and Kent County need orbital welding on electropolished 316L tube for water for injection, clean steam, CIP and process lines, plus carbon steel welding on plant steam, chilled water and support steel. Paul Industries provides both, with weld maps, coupons, borescope records and welder qualifications organized for the site’s quality unit.

Who provides plant welding in Woonsocket, Lincoln and Smithfield?

Paul Industries provides repair and alteration welding at plastics, materials, textile and food plants in Woonsocket, Lincoln, Cumberland and Smithfield: new branches on existing headers, cracked frames and machine bases, hoppers, chutes and stainless food equipment. Each repair begins by identifying the base metal, since older mill buildings mix cast iron, wrought iron and early steels.

Which welding jobs does Paul Industries take on at Newport and Westerly sites?

On Aquidneck Island, in Newport, Middletown and Portsmouth, and down the coast in Westerly, Narragansett and South County, Paul Industries welds plant utilities, structural steel and equipment for marine industry plants, hospitals, research buildings and food producers. Stainless exposed to salt air is specified as 316L, welds are cleaned and passivated, and carbon steel is coated for marine exposure.

Is there a Rhode Island welding certification for welding on pipe systems?

Rhode Island handles it through a license class in its mechanical trades rules. The Department of Labor and Training’s pipefitter rule includes a welding limited license for welding pipe, hangers and supports, granted on proof of a recognized welding test such as an ASME test, with the welder working under a Pipefitter Master I or II. The code qualification under ASME Section IX still applies to every weld.

Who notifies the state before a welded repair on a Rhode Island boiler or pressure vessel?

The organization making the repair notifies the Division of Occupational Safety’s boiler unit or an authorized inspector before welding begins, under section 28-25-10(c), and files the completed NBIC repair or alteration form afterward. Paul Industries prepares the repair plan and notice, schedules the inspector’s hold points into the outage and keeps the filed form in the owner’s records.

What does the Rhode Island fire code require before welding inside a plant?

NFPA 1, 2021 edition, in force in Rhode Island since March 1, 2026, requires a written hot work permit from the permit authorizing individual, combustibles within 35 feet moved or shielded, wall and floor openings covered, a fire watch during and after the work, and a final area check. Plants often add their own rules for flammable chemicals and running lines.

Which records should welding companies in Rhode Island hand over after a plant job?

Welding companies in Rhode Island should hand over the welding procedure specifications and qualification records used, welder qualifications and continuity logs, a weld map with welder identification for each joint, examination and test reports, hot work permits, and for any boiler or vessel repair the NBIC form and inspector acceptance. Paul Industries assembles that package as standard.

How are cracked polypropylene and PVDF tanks repaired by welding?

A cracked thermoplastic tank is drained, cleaned and dried, the crack is routed out to sound material with crack-stop holes drilled at each end, and the groove is re-welded by extrusion or hot gas welding with filler of the same polymer and grade. The seam is spark tested where the material allows and the tank is filled and checked before chemistry returns.

What does structural welding special inspection involve in Rhode Island?

Under RISBC-1, the 2021 IBC, structural steel welding on platforms, racks and building additions is checked by a special inspector against AISC 360 quality assurance and AWS D1.1. The inspector reviews procedures and welder qualifications, observes preheat and welding where required, and examines finished welds. Paul Industries supplies the procedures, welder certificates and visual inspection records the inspector asks for.

How are welders and procedures qualified for a Rhode Island plant job?

Each weld is made to a written welding procedure specification supported by a procedure qualification record, and each welder holds a performance qualification for the process, position and thickness range, under ASME Section IX for pipe and vessels or AWS D1.1 for structural steel. A welder’s Section IX qualification lapses after six months without welding in that process, so continuity is logged.

Can welding be done next to a running plating or food line?

Welding next to a running line is planned with the plant: flammable chemicals and packaging are moved or shielded, polypropylene tanks and ducts near the work are isolated, spatter screens and fire blankets are set, a fire watch stands by, and the work is held to windows the plant approves. Many tie-ins are prefabricated so the in-line work is reduced to a few closing welds.

How much radiography does a B31.3 piping job in Rhode Island call for?

ASME B31.3 normal fluid service calls for random radiographic or ultrasonic examination of at least 5 percent of circumferential butt welds, with every weld examined visually. When a sampled weld fails, progressive examination adds two more welds by the same welder, then more if those fail. Category M, high-pressure and severe cyclic service raise the requirement, and owners can specify more.

Are welding contracts on Rhode Island public buildings covered by prevailing wage law?

Yes. Section 37-13-7 reaches public works contracts above $1,000 let by the state, its cities and towns and public or quasi-public agencies, and each bid call lists a wage floor per trade that the Department of Labor and Training sets for the town where the work happens. Welding at state hospitals, public universities, treatment plants and municipal buildings sits inside that rule, with weekly pay and posted rates.

Does Paul Industries build welded spools and frames off site for Rhode Island plants?

Yes. Paul Industries fabricates pipe spools, tube assemblies, frames, platforms and thermoplastic tanks off site, examined and tested before shipment, and delivers them supply-only, as part of a design-build package or with complete field installation. Off-site fabrication keeps hot work inside the plant to closing welds and shortens outages.

What does a Rhode Island facility send to get welding work priced?

Drawings, sketches or photos of the work, materials and thicknesses, the codes involved, examination requirements, access and height, the windows production allows, and whether the contract is public. For a boiler or vessel repair, add the nameplate data and the inspector’s finding. Paul Industries turns that into a budget and then a firm price. Call 201-450-8280 or request a quote.

Need pipe, tube, structural or plastic welding at a Rhode Island plant?

Send drawings or photos, the materials and codes involved and the outage dates you are working to. Call 201-450-8280 or request a quote.