Paul Industries provides boiler repair in Rhode Island for hospitals, universities, schools, public buildings and manufacturing plants, repairing tubes, shells, burners, controls, safety valves and trim on power, high temperature and heating boilers. Rhode Island rewrote its boiler rules late in 2025: the amended 260-RICR-30-10-2 took effect on December 24, 2025 and moved the state to the 2025 National Board Inspection Code, the 2025 ASME Boiler and Pressure Vessel Code and ASME CSD-1:2024. Paul Industries plans every Rhode Island repair against those editions, the notification steps in the statute and the inspection calendar the Boiler Unit keeps.
Request a quote or call 201-450-8280
What does boiler repair in Rhode Island cover under the amended 2025 rules?
Boiler repair in Rhode Island covers any work that restores the pressure parts, firing equipment, controls or relief devices of a unit regulated under R.I. Gen. Laws Chapter 28-25, and the regulation that carries out that law now names its reference codes by edition year. The Boiler Unit sits inside the Division of Occupational Safety at the Department of Labor and Training, with offices at 1511 Pontiac Avenue in Cranston, and the Rhode Island chief boiler inspector is appointed by the Director of Labor and Training and reports to the division’s administrator. The amended rule lets the Director delegate the administrator’s statutory duties to the chief inspector, which places most day-to-day decisions about a repair with that office.
The rule draws a sharp line between a repair and an alteration. A repair restores a boiler to a safe and satisfactory condition with no deviation from the original design. An alteration changes an item on the original Manufacturer’s Data Report in a way that affects pressure capability, and the definition also captures paper changes: raising the maximum allowable working pressure or design temperature counts as an alteration even when no metal is touched, and so does lowering the minimum temperature far enough to require added mechanical tests. Paul Industries classifies the job at the start, because the classification decides the paperwork, the inspector’s role and the fee.
| Requirement | Source | What it means for the repair |
|---|---|---|
| Codes adopted by edition | 260-RICR-30-10-2, section 2.3 | NBIC 2025 for repairs and alterations, ASME BPVC 2025 for new parts, ASME CSD-1:2024 for controls |
| Notice before welding | R.I. Gen. Laws 28-25-10(c) | The Boiler Unit or an authorized inspector is told before any welded repair or alteration begins |
| Form after welding | 28-25-10(c) | A completed NBIC repair or alteration form is filed with the division |
| Repair authorization | Rule 2.5.21 | Repairs follow NBIC 2025 under a National Board R certificate, an ASME certificate within its quality system, or chief inspector authorization |
| Replaced fittings | Rule 2.7.1 | Replaced fittings and appliances meet the rules for new installations |
| Carbon monoxide detection | Rule 2.5.22 | A detector in or beside the boiler room when an existing installation receives repairs or new items |
| Repair and alteration permit | Rule 2.5.13 | A $100 state fee for the permit |
Which units does the Rhode Island boiler code reach, and which sit outside it?
The Rhode Island boiler code reaches every closed vessel that heats water or another liquid, or makes or superheats steam or vapor, under pressure or vacuum for use outside itself, by fuel, electricity, nuclear energy or solar energy. The definition also takes in fired thermal fluid heaters that stand apart from a processing system and are complete within themselves, and the rule treats an unfired steam generator heated by a process stream as an unfired power boiler. The controls and safety devices count as part of the boiler, so a burner management fault is as much a code matter as a cracked tube.
The statute leaves out boilers under federal control, boilers on vessels in state waters and units on railroad equipment. A heating boiler in a private residence, or in an apartment house of fewer than six units, is excused from the certificate and fee sections while its input stays at or below 400,000 Btu per hour. The rule adds a point that surprises many facility owners: a boiler under 200,000 Btu per hour, or a steam boiler making less than 200 pounds an hour, is treated as a residential type unit outside CSD-1 only when it sits outside places of public assembly. In a school, child care center, hospital, nursing or boarding home, church or public building, the same small unit stays inside the rules.
| Class | Statutory limits | Inspection under rule 2.5.2 | State fee |
|---|---|---|---|
| Power boiler | Steam or vapor above 15 psig | Every year, internal where construction permits, plus a yearly external under normal operation | $60 certificate fee after an insurer’s inspection; $96 per state inspection |
| High pressure, high temperature water boiler | Above 160 psig or above 250 F | Same annual internal and external cycle as a power boiler | $60 certificate fee after an insurer’s inspection; $60 per state external |
| Steam heating boiler | Steam or vapor at 15 psig or less | External every two years with controls and safety devices tested; internal at the inspector’s discretion | $60 biennial |
| Hot water heating or supply boiler | 160 psig and 250 F or less | External every two years; internal where construction permits, at the inspector’s discretion | $60 biennial |
| Electric boiler | Heat from electricity alone | Interval of its pressure class | $60 biennial |
Rhode Island boiler inspection timing and the certificate in the boiler room
A Rhode Island boiler inspection that renews the certificate is made by the authorized inspector before the certificate expires, at a time the inspector and the owner agree on, and most commercial units are inspected by an inspector employed by the boiler’s insurer. External inspections need no advance notice and may happen during any reasonable hours. When an external visit or other evidence points to a hazard, the inspector may call for an internal inspection, a pressure test or both, and the owner prepares the unit as directed.
Once the unit passes, the certificate states the allowed pressure and the date and must be posted conspicuously. Each unit also carries a state serial number applied by the inspector in characters at least five sixteenths of an inch high, and cast iron heating boilers carry it on a corrosion resistant tag fixed to the front. Insurers must tell the chief inspector within five business days when coverage is written, cancelled, not renewed or suspended for unsafe conditions, which means a lapse in coverage reaches the state quickly. Cities, towns, fire districts, the state and religious or charitable societies pay no inspection fee under the statute, though their boilers are inspected on the same schedule.
Preparing a steam boiler in Rhode Island for an internal inspection
Preparing a steam boiler in Rhode Island for an internal inspection follows a checklist written into rule GR-2, and the owner must have the work done on the date the inspector sets, at least seven days after notice. An unprepared unit costs more than a lost day: under GR-3 the inspector may decline the inspection and the certificate is withheld until the owner complies. Paul Industries treats preparation as the first day of a repair outage, because opening the unit for the inspector is also a clear look at its condition.
| GR-2 step | What it requires | How Paul Industries handles it |
|---|---|---|
| Drain and wash | Water drawn off and the waterside washed thoroughly | Drain, flush and record scale and sludge found for the water treatment review |
| Openings | Manhole and handhole plates, washout plugs and water column plugs removed as the inspector requires | Remove and inspect covers, order new gaskets before the outage |
| Fireside | Furnace and combustion chambers cooled and cleaned; grates of internally fired units removed | Brush tubes, vacuum soot and ash, pull grates and photograph refractory |
| Insulation and brickwork | Removed where the inspector needs to see headers, furnace or supports | Remove and reinstall lagging and setting walls, with asbestos work done first under 216-RICR-50-15-1 |
| Pressure gauge | Removed for testing when required | Pull, test and replace gauges and siphons |
| Isolation on a shared header | Stop and non-return valves and feed valves closed, tagged and padlocked, with drains between them opened; blow-off valves locked | Write the isolation plan and verify each valve before anyone enters a drum |
| Vents and drains | All drains and vent lines opened; blow-off lines disconnected where practicable | Open, blank and tag lines, then restore them at closeout |
Rule GR-4 adds that jacketing or setting walls must come off where longitudinal seams of shells, drums or domes are hidden, unless the condition can be confirmed another way. Older Rhode Island firetube units with riveted or lap seams draw that requirement most often, and the lagging work belongs in the outage plan from the start.
How a Rhode Island inspector’s finding turns into a repair
A Rhode Island inspector’s finding turns into a repair through a written notice to the owner that states the repairs or corrective measures needed, and the timeline depends on how serious the condition is. Where the inspector judges a danger imminent, the jurisdictional authority may stop operation until the defective parts are repaired or renewed and a new certificate is issued. Where the danger is not imminent, the inspector sets a reasonable time for the repair, and use of the unit ends when that time runs out without the work done.
If an owner does not act promptly on an unsafe finding, the authorized inspector reports to the chief inspector, the certificate is suspended and no further operation is permitted. A leak or crack seen during an external inspection lets the inspector order enough covering removed to judge the unit, or stop operation until it can be. The inspector may also lower the working pressure of an existing installation when its condition warrants; the owner may appeal that decision to the chief inspector, who may call a joint inspection and makes the final call. A broader dispute with a division decision goes to the occupational safety and health review board, and the written demand for that hearing is due within two days. Running past an order carries fines of up to $500 per violation, with each day a separate offense.
Paul Industries works from the inspector’s report: it opens the unit, confirms the extent of the damage, writes the repair procedure, and builds a schedule that brings the boiler back to certificate inside the time the inspector set.
Boiler repair, Rhode Island notice rules and the 2025 NBIC for welded work
Welded repairs and alterations on a Rhode Island boiler follow the 2025 edition of the National Board Inspection Code, and the statute requires notice to the Boiler Unit or an authorized inspector before work begins and a completed NBIC form filed with the division after it ends. Rule 2.5.21 recognizes three bases for repair work: a National Board R certificate, an ASME certificate of authorization when the repair falls within that quality control system, or written authorization from the chief inspector. Alterations require an ASME certificate of authorization. The inspector reviews the repair plan, may hold points for fit-up or examination, and accepts the pressure test before the unit returns to service.
Common Rhode Island repairs include retubing firetube boilers, plugging or replacing watertube tubes, rewelding cracked tube sheets and furnace sections, replacing handhole seats, and renewing refractory and baffles. Material, weld procedures and examinations are matched to the boiler’s original construction. Where a repair changes design values, such as a rerate after thinning, the job becomes an alteration with calculations and new nameplate data. Paul Industries pairs pressure part welding with industrial welding services in Rhode Island and carries the repair through hydrostatic testing, inspector acceptance and the filed form.
Two rule details catch owners off guard after a repair. A carbon monoxide detector must be in or immediately next to the boiler room whenever an existing installation receives repairs or new items, so a tube job in a school or office can add a detector to the scope. And replaced fittings and appliances, such as water columns, gauge glasses, feedwater valves and safety valves, must meet the requirements for new installations, which means a like-for-like swap of an obsolete part may need a current code part instead.
Is fixing a boiler dangerous, and what happens after a Rhode Island boiler accident?
Fixing a boiler is dangerous when stored energy, hot water, flue gas or a shared steam header is not controlled, which is why the Rhode Island rule writes lockout of stop, non-return, feed and blow-off valves into its preparation steps. Repairs on an operating plant add confined space entry into drums and furnaces, hot work near fuel trains and lifting of heavy components. Paul Industries plans isolation, ventilation, gas testing and rigging for each opening before any cover comes off.
When an accident occurs to a boiler, pressure vessel, power piping or process piping, the owner or user must send a detailed report to the chief inspector. An injury or explosion is reported immediately, and nothing may be removed or disturbed until the chief inspector allows it, except to save life or limit further damage. A unit declared unfit for service is stamped DO NOT OPERATE on both sides with state-approved marking, and the condemnation is recorded in the registration database; offering it for sale or operating it carries penalties. Paul Industries documents the damage once the scene is released and plans repair or replacement with the inspector and the insurer.
Burners, controls and the air permit behind a Rhode Island boiler
Burners and controls on a Rhode Island boiler are governed by the boiler law itself, which directs that codes for controls, safety devices and appurtenances follow ASME CSD-1 or the NFPA 85 series, and the 2025 rule adopts CSD-1:2024 by name. A repair that touches the flame safeguard, low water cutoffs, limit controls, fuel train valves or combustion air proving brings those parts up to the adopted code. Paul Industries rebuilds gas trains and burners, replaces flame safeguards, tests every interlock and leaves signed combustion and safety device records.
The fuel decides the air permit. Under RIDEM Air Pollution Control Regulation No. 9, a minor source permit is required before installing or modifying fuel burning equipment at the thresholds below, so a burner conversion or replacement boiler can trigger review even when the boiler work itself is routine.
| Fuel | Heat input that requires a permit | Typical Rhode Island equipment |
|---|---|---|
| Natural gas or other gaseous fuel | 10 million Btu per hour or more | Hospital and campus steam and hot water plants, larger process boilers |
| Distillate and other liquid fuels | 5 million Btu per hour or more | Dual fuel burners, oil standby on gas boilers |
| Residual oil or solid fossil fuel | 1 million Btu per hour or more | Older heavy oil plants being converted |
| Alternative fuels such as wood chips or waste oil | 1 million Btu per hour or more | Biomass units and waste oil heaters |
| Emergency or distributed generators | 350,000 Btu per hour or more | Standby power beside the boiler plant |
When does a boiler need to be replaced, and what does boiler replacement in Rhode Island require?
A boiler needs to be replaced when the repairs needed to keep its certificate cost more than the remaining life justifies, when the inspector reduces its pressure below what the process needs, or when it has been condemned. Rhode Island has no fixed age limit for existing boilers of standard construction: rule 2.6.1 ties continued service to internal and external inspection and, where the inspector requires it, a hydrostatic test up to one and a half times the allowable working pressure. Repeated tube failures, a wasted furnace, cracked sections on a cast iron unit and obsolete controls are the usual reasons owners move to boiler replacement, Rhode Island rules and permits included.
Any person installing a new or second-hand boiler applies first for a permit to install from the Boiler Unit; the fee is $120 for heating boilers and other low pressure units and $300 for power boilers. A second-hand unit needs an installation application and the chief inspector’s approval before it is set. New units are built and stamped to the 2025 ASME code, carry a National Board number, and have the Manufacturer’s Data Report filed with the chief inspector through the National Board. A unit that cannot carry ASME and National Board marks can be approved only as a State Special, with a registered professional engineer’s calculations approved before construction starts. Building work around the boiler room falls under RISBC-1, the Rhode Island Building Code based on the 2021 International Building Code, with city and town building officials enforcing it.
Paul Industries handles boiler removal, Rhode Island permit applications, the setting of the new unit, piping to process piping in Rhode Island standards under ASME B31.1, new controls and the startup, and brings the inspector in when a boiler is being placed in service so the certificate and state serial number are in place before the unit carries load. Vessels in the boiler room, from deaerators to blowdown tanks, are covered by pressure vessel fabrication in Rhode Island, and fuel oil storage by tank fabrication in Rhode Island.
Steam and hot water plants from Providence to South County
Steam and hot water plants in Rhode Island sit in a compact, dense building stock, so most boiler rooms serve hospitals, universities, schools, public buildings, mills converted to offices and manufacturers, with many in places of public assembly where the state rules reach even small units. Campus plants are changing: Brown University’s Thermal Efficiency Project converted its central heating plant boilers from 150 psi steam to hot water, and in June 2026 the university announced a new campus thermal energy system. Plants that keep steam, from food processors to finishing shops, depend on it for process heat, cleaning and humidification.
Providence, Cranston and Warwick
Providence holds the state’s largest hospitals, its universities and state office buildings, and boiler rooms there often run several units on a shared header, which makes the GR-2 lockout steps a daily planning item. Cranston and Warwick add manufacturers, schools and public buildings along the Route 95 corridor.
Pawtucket, Central Falls, Woonsocket and the Blackstone Valley
Former textile and jewelry mills in Pawtucket, Central Falls and Woonsocket still carry low pressure steam systems with long condensate returns, and repairs there often include traps, returns and feedwater along with the boiler. Paul Industries pairs those jobs with boiler water treatment where scale and corrosion drove the failure.
Kent County, Quonset, Newport and South County
West Greenwich and the Kent County corridor hold biologics and manufacturing plants, North Kingstown holds the Quonset Business Park, and Newport and South County add hospitals, schools and seasonal buildings exposed to salt air, which shortens the life of burner housings, breeching and outdoor controls.
Public boiler work and Rhode Island prevailing wage
Public boiler work in Rhode Island falls under the state prevailing wage law whenever the state, a city or town, or a public or quasi-public agency calls for bids on a construction, alteration or repair contract above $1,000. R.I. Gen. Laws 37-13-7 has the Director of Labor and Training set the minimum rates for each trade and city or town, requires weekly payment of everyone employed directly on site, and requires the wage scale to be posted at the work. Paul Industries prices public boiler repairs for schools, state buildings and municipal plants on those rates and keeps the payroll records the contract requires. Hospitals and private campuses usually fall outside the statute unless public funds or a public owner bring the work in.
What does boiler repair cost in Rhode Island?
Boiler repair in Rhode Island costs what the scope, access and schedule demand, and the state’s own charges are a small, fixed part of the total: $100 for a repair and alteration permit, $60 for a biennial certificate on a heating boiler, $96 for a state inspection of a power boiler, $100 for a hydrostatic test witnessed by a state inspector, and $120 or $300 for a permit to install a replacement. The larger drivers are the labor and materials for the repair itself, the extent of damage found once the unit is open, asbestos abatement before insulation comes off, overtime to stay inside an outage window, rental steam or hot water to carry the building, and any added detectors, controls or fittings the rules require after a repair.
Paul Industries gives a budget range from photos, the inspection report and comparable scope, then a firm price once the unit is opened and the full repair is defined. Owners who send the certificate, the inspector’s report, recent logs and water treatment results get the closest first number.
Who repairs boilers in Rhode Island?
Paul Industries repairs boilers in Rhode Island for hospitals, universities, schools, public owners and manufacturers, and it handles boiler repair, RI plant outages and replacements under one contract, from Providence, Cranston and Warwick to Pawtucket, Woonsocket, Kent County, Quonset, Newport and Westerly. Paul Industries is an East Coast contractor headquartered at 256 Shore Drive, Kilmarnock, Virginia, formerly based in northern New Jersey and then Pennsylvania, and it takes boiler work across Rhode Island, throughout New England and in all 50 states. Neighboring state programs are set out on boiler repair in Massachusetts and boiler repair in Connecticut, and the program in Paul Industries’ headquarters state is on boiler repair in Virginia.
Paul Industries opens, inspects and repairs pressure parts, retubes firetube and watertube boilers, rebuilds burners, gas trains and controls, replaces safety valves and low water cutoffs, and supplies and installs replacement boilers through supply-only, design-build or complete installation routes. Chilled water plants that share the mechanical room are covered by chiller repair in Rhode Island, and the national scope is on boiler repair.
Boiler repair and service from Paul Industries across Rhode Island
Paul Industries carries a Rhode Island boiler from the inspector’s report to a reissued certificate: preparation under GR-2, diagnosis, notice to the Boiler Unit, welded and mechanical repairs to the 2025 NBIC, control and burner work to CSD-1:2024, the hydrostatic test, combustion readings and the filed forms. For hospitals and healthcare campuses the work follows the outage rules described under hospitals and healthcare. More on the state’s plants and industries is on the Rhode Island page. To plan a repair, a service contract or a replacement, send the boiler’s state serial number, nameplate photos, the latest certificate and report, and recent logs, then request a quote or call 201-450-8280.
Standards referenced: R.I. Gen. Laws Chapter 28-25, Boiler Inspection and Pressure Vessels · 260-RICR-30-10-2, Boiler and Pressure Vessel Inspection (amendment effective December 24, 2025) · National Board Inspection Code (NBIC), 2025 edition · ASME Boiler and Pressure Vessel Code, 2025 edition, Sections I, IV, VI, VII and IX · ASME CSD-1:2024, Controls and Safety Devices for Automatically Fired Boilers · NFPA 85, Boiler and Combustion Systems Hazards Code · ASME B31.1 Power Piping · RIDEM Air Pollution Control Regulation No. 9 (250-RICR-120-05-9) · RISBC-1 Rhode Island Building Code (2021 International Building Code with Rhode Island amendments) · 216-RICR-50-15-1, Rhode Island Rules and Regulations for Asbestos Control · R.I. Gen. Laws 37-13-7, prevailing wages on public works
Frequently asked questions
Who provides boiler service, Providence RI hospitals and universities included?
Paul Industries provides boiler service in Providence, RI for hospitals, universities, state buildings, offices and manufacturers. Providence plants often run several boilers on one header, so service and repair outages are staged unit by unit while the others carry the buildings, with stop, non-return and feed valves locked out as the Rhode Island rule requires. Paul Industries keeps service records in a form the authorized inspector can review at the next certificate inspection.
Does Paul Industries handle boiler repair, Cranston RI plants and schools included?
Paul Industries handles boiler repair in Cranston, RI for manufacturers, schools, public buildings and offices, and the state Boiler Unit itself is based in Cranston at 1511 Pontiac Avenue. Many Cranston schools fall under the places of public assembly rule, which keeps even small boilers inside the state inspection program and under CSD-1. Paul Industries repairs those units to the 2025 rules and files the records the inspector expects.
Who handles boiler repair, Pawtucket RI mills and Central Falls buildings included?
Paul Industries handles boiler repair in Pawtucket, RI and Central Falls for converted mill buildings, manufacturers, schools and housing owners with larger heating plants. Old mill steam systems often have long, corroded condensate returns that send oxygen and debris back to the boiler, so the repair includes return line, trap and feedwater checks. Paul Industries replaces failed tubes or sections and corrects the condition that caused the failure.
Can Paul Industries repair boilers in Woonsocket and the Blackstone Valley?
Paul Industries repairs steam and hot water boilers in Woonsocket, Lincoln, Smithfield, Cumberland and the rest of the Blackstone Valley for manufacturers, schools, hospitals and public buildings. Some Blackstone Valley plants still burn oil as a backup fuel, so burner work there often covers both gas and oil trains and the air permit thresholds for each fuel. Paul Industries tests every interlock after the repair and records the readings.
Does Paul Industries take boiler work in Newport, Aquidneck Island and South County?
Paul Industries takes boiler repair and replacement work in Newport, Middletown, Portsmouth and across Aquidneck Island, and in Westerly, Narragansett and South County. Salt air on the coast corrodes burner housings, breeching, outdoor controls and stack caps faster than inland, so coastal repairs often include those components. Paul Industries plans work in seasonal buildings around their occupied months.
Is boiler service in RI required between certificate inspections?
Boiler service in RI between certificate inspections is the owner’s responsibility, and the Rhode Island rule points owners to ASME Section VII for power boilers and Section VI for heating boilers as guides to safe operation. Those guides call for routine testing of low water cutoffs and safety valves, water treatment control, blowdown and combustion checks. Paul Industries performs scheduled boiler service, Rhode Island certificate dates in view, under a service contract and leaves dated records for the inspector.
What maintenance is required on a boiler annually in Rhode Island?
The maintenance required on a boiler annually in Rhode Island includes the inspection the state rule sets for power and high temperature water boilers, plus the owner’s yearly work: a combustion tune with flue gas readings, testing of the flame safeguard, limit controls and low water cutoffs, safety valve checks, a waterside and fireside cleaning, gasket and refractory repairs, and a water treatment review. Heating boilers on a two-year inspection cycle still need that annual work. Paul Industries schedules it ahead of the heating season.
What must happen when a boiler is being placed in service in Rhode Island?
When a boiler is being placed in service in Rhode Island, the installer has a permit to install from the Boiler Unit, the unit is inspected and given a state serial number, a carbon monoxide detector is in or beside the boiler room, and a certificate stating the allowed pressure is issued and posted before regular operation. Running a new unit before its certificate is issued is a violation of the statute. Paul Industries schedules the inspection inside the startup plan.
What does the Rhode Island chief boiler inspector decide during a repair?
The Rhode Island chief boiler inspector, appointed by the Director of Labor and Training, receives reports of unsafe units, can suspend a certificate, decides appeals when an authorized inspector lowers a boiler’s working pressure, approves State Special construction and second-hand installations, and authorizes repair organizations when no certificate applies. Under the 2025 rule the chief inspector also sets requirements where no code provision applies. Paul Industries prepares the technical record each of those decisions needs.
Does a small boiler in a Rhode Island school need a state inspection?
A small boiler in a Rhode Island school needs a state inspection, because the rule treats units under 200,000 Btu per hour, or steam boilers under 200 pounds per hour, as residential type only when they are outside places of public assembly. Schools, child care centers, hospitals, nursing homes, churches and public buildings are named, so their small boilers stay in the program and follow CSD-1. Paul Industries repairs and replaces those units with the required controls.
Can a Rhode Island boiler be sent out of state for repair?
A Rhode Island boiler can be sent out of state for repair, but before it comes back the owner files a new installation application with the chief inspector for permission to reinstall it. A nonstandard boiler removed from Rhode Island may not be reinstalled at all. Paul Industries repairs small and package boilers in place or prefabricates parts off site, which keeps the unit inside the state and avoids the reinstallation step.
What if a Rhode Island inspector lowers a boiler's allowed pressure?
If a Rhode Island inspector lowers a boiler’s allowed pressure because of its condition, the owner may appeal to the chief inspector, who may request a joint inspection and makes the final decision from the inspection reports. Owners who need the original pressure for the process can repair the condition, such as thinned plates or tubes, and ask for reinspection. Paul Industries measures thickness, designs the repair and supports the request.
Does a thermal fluid heater count as a steam boiler in Rhode Island?
A fired thermal fluid heater counts as a boiler under the Rhode Island statute when it heats or vaporizes a liquid other than water and stands apart from the processing system, complete within itself. It is inspected, issued an operating certificate and repaired under the same rules that govern any steam boiler, Rhode Island plants included. Paul Industries repairs coils, burners and controls on those heaters and tests the fluid system after the work.
Who pays the inspection fee on a city or state-owned boiler in Rhode Island?
Cities, towns, fire districts, the state and religious or charitable societies pay no inspection fee under the Rhode Island statute, but their boilers still need inspection, a certificate and code repairs. Other owners pay the fees set in the rule, such as $60 every two years for a heating boiler certificate. Paul Industries includes any repair permit and witnessed test fees in its quotes so the owner sees the full cost.
How fast must a Rhode Island boiler accident be reported?
A Rhode Island boiler accident that injures someone or involves an explosion must be reported to the chief inspector immediately, and every other accident to a boiler, pressure vessel, power piping or process piping is reported promptly with a detailed written report. Parts may not be moved or disturbed until the chief inspector permits, except to save life or limit further damage. Paul Industries assesses and documents the damage once the scene is released.
Do Rhode Island boiler laws require a carbon monoxide detector after a repair?
Rhode Island boiler laws, through rule 2.5.22, require a carbon monoxide detector in or immediately adjacent to the boiler room when an existing installation receives any new items or repairs, as well as for new, second-hand and reinstalled units. A tube repair or a new burner in an older building can therefore add a detector to the scope. Paul Industries supplies and installs the detector as part of the repair.
Which edition of the RI boiler code applies to a repair started in 2026?
A repair started in 2026 falls under the RI boiler code as amended effective December 24, 2025, which adopts the 2025 National Board Inspection Code, the 2025 ASME Boiler and Pressure Vessel Code and ASME CSD-1:2024. Earlier repair records filed under the 2017 references remain part of the boiler’s history. Paul Industries plans procedures, materials and test pressures to the current editions.
What should an owner send to price a boiler replacement, RI permits included?
To price a boiler replacement in Rhode Island, send the state serial number, nameplate photos, the latest certificate and inspection report, the fuel and firing rate, the load profile by season, photos of the boiler room, the breeching and the access route, and any air permit on file. Paul Industries uses those to size the replacement, check whether a Regulation No. 9 permit applies, and quote supply-only, design-build or complete installation.
Holding a Boiler Unit finding or a failed boiler in Rhode Island?
Send the state serial number, nameplate photos, the latest certificate and inspection report, and recent logs. Call 201-450-8280 or request a quote.
