Paul Industries provides chiller repair in Colorado for centrifugal, screw and scroll chillers at hospitals, universities, offices, data centers, breweries and manufacturing plants, from Denver and Boulder to Fort Collins, Colorado Springs and Pueblo. Colorado adds its own refrigerant rule to the federal ones, and that rule counts repair spending: once replacement work on an older comfort-cooling chiller passes half the cost of a new system, the machine is treated as new equipment. Thin air, hail and hard freezes then shape which repairs come up most often.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
State HFC rule New comfort chillers barred from HFC-134a, R-410A and other listed HFCs since January 1, 2024 (Regulation 22)
Repair trigger Cumulative replacement over 50 percent of system capital cost makes a chiller "new" under Regulation 22
Air at 5,000 ft About 84 percent of sea-level pressure, so air-cooled condensers lose capacity
Hail 176 reports of 2-inch or larger hail statewide in 2023 (Colorado Climate Center)
Reviewed November 2026

What is particular about chiller repair in Colorado?

Chiller repair in Colorado is shaped by a state refrigerant regulation that reaches into repair decisions, by an elevation that cuts air-cooled capacity, and by a climate of dry heat, hail and sharp freezes. The physical repairs themselves, from leak repair and compressor overhauls to tube cleaning and controls work, follow the same methods described on the national chiller repair page. What changes is the context around each job: whether a repair keeps a machine within the protection Colorado gives existing equipment, how hard the climate has worked the condenser, and which season allows the machine to be taken out of service.

Owners of Colorado chillers therefore need two kinds of records that owners in many states can skip. One is a running total of capital spent replacing components on each comfort-cooling chiller since January 1, 2024. The other is a log of refrigerant type and any conversions. Paul Industries keeps both as part of each repair report.

Regulation 22 and the January 1, 2024 chiller prohibition

Colorado’s Regulation 22, adopted by the Air Quality Control Commission, prohibits listed hydrofluorocarbons in new centrifugal and positive displacement chillers used for comfort cooling, with a date of prohibition of January 1, 2024. The listed substances include HFC-134a, R-410A, R-407C, R-404A and R-507A for both chiller types, and HFC-245fa for centrifugal machines. The rule adopts the EPA’s earlier SNAP prohibitions into state law and applies to anyone who sells, installs, uses or manufactures covered equipment in Colorado.

The regulation protects existing equipment. A chiller acquired before January 1, 2024 may keep running, and equipment manufactured before that date may still be installed, serviced and used. Two things remove that protection: converting the system to a different refrigerant after the prohibition date, and doing enough work to the machine that the rule treats it as new. The chiller definitions cover machines intended for comfort cooling of occupied spaces and expressly exclude industrial process cooling, so a brewery’s glycol chiller or a plastics plant’s process chiller sits outside this part of the rule, while an office, hospital or campus chiller sits inside it.

When does a repaired chiller count as new under Colorado’s rule?

A repaired chiller counts as new under Regulation 22 when components are replaced, at one time or cumulatively, so that the capital cost of replacement after the prohibition date exceeds 50 percent of the capital cost of replacing the whole system. The rule defines capital cost broadly: engineering, purchase and installation of components, instrumentation, and contractor and construction fees all count. A chiller is also treated as new if components are added to increase its capacity after the prohibition date.

For an owner of an HFC-134a centrifugal machine or an R-410A scroll machine bought before 2024, that definition turns repair planning into arithmetic. A compressor rebuild one year, a motor replacement the next and a condenser retube the year after can add up past the threshold, and the machine would then have to meet the prohibition as new equipment, which a chiller charged with a listed HFC cannot do. Paul Industries records the capital cost of each replacement on a Colorado comfort-cooling chiller, compares the running total with a current replacement estimate, and tells the owner before a proposed repair would cross the line, so the decision to replace is made deliberately rather than discovered.

How common repairs sit against Colorado’s Regulation 22 on a pre-2024 comfort chiller
Repair or changeEffect under Regulation 22What to record
Leak search and repair, recharge with the same refrigerantServicing existing equipment; protection continuesLeak location, refrigerant added, federal leak rate records
Compressor overhaul or replacementCounts toward cumulative replacement capital costFull capital cost, including engineering and installation
Motor, starter or drive replacementCounts toward cumulative replacement capital costCapital cost and date
Evaporator or condenser retube or replacementCounts toward cumulative replacement capital costCapital cost, tube test results
Controls upgrade, sensors and safetiesCounts as component replacement where components are replacedCapital cost and scope
Added capacity, such as a larger compressorMakes the chiller new under the ruleDesign basis for any capacity change
Conversion to a different refrigerantA retrofit after the prohibition date removes the existing-equipment protectionRefrigerant chosen and its status under the rule
Process chiller work at a plantOutside the comfort-cooling chiller definitionsFederal records still apply

Federal rules that sit alongside Regulation 22

Federal refrigerant rules apply in Colorado on top of the state rule. The EPA’s Technology Transitions rule caps the global warming potential of refrigerant in comfort-cooling chillers installed since the start of 2025 at under 700, and the EPA’s leak repair rule under 40 CFR 84.106 has applied since January 1, 2026 to appliances holding 15 pounds or more of HFC refrigerant, with a 10 percent leak rate threshold for comfort cooling. R-22 machines remain legal to operate and service with reclaimed or stockpiled refrigerant, although no new R-22 has been produced or imported since 2020. Paul Industries keeps the leak rate calculations and verification tests those rules require in the same file as the Regulation 22 cost total.

Repair or replace: the Colorado arithmetic

Repair or replace decisions in Colorado combine the usual factors, age, efficiency, refrigerant and reliability, with the Regulation 22 cost threshold. A large repair on a pre-2024 HFC machine that would push cumulative spending past half the replacement cost is, in effect, a decision to replace, because the repaired chiller could no longer keep its refrigerant. In that case the owner is better served by putting the money toward a compliant machine selected for the site’s elevation and load.

Energy is the other half of the arithmetic. Colorado’s 2025 average electricity prices were 12.37 cents per kilowatt-hour for commercial customers and 9.02 cents for industrial customers (EIA). As an example, a 600-ton plant that improves by 0.15 kilowatt per ton over 2,500 equivalent full-load hours saves 225,000 kilowatt-hours a year, about $27,833 at the commercial average or $20,295 at the industrial average. Paul Industries runs that comparison with the owner’s own rate and run hours, and sets it beside the repair quote and the Regulation 22 total.

Air cooled chiller repair at elevation

Air cooled chiller repair is a large share of Colorado service work because thin air makes the condenser the weak point of the machine. A mile up, barometric pressure runs near 84 percent of the coastal figure, so condenser fans push fewer pounds of air across the coil and the refrigerant condenses at a higher pressure for the same load. On a hot afternoon a machine that was sized without the altitude correction runs close to its high-pressure limit, and any extra loss, such as dirty or bent fins, a failed fan or a weak fan motor, tips it into high head pressure trips.

The repair work that follows is predictable: fan motors and blades, contactors and variable-speed fan drives, coil cleaning and fin combing, and refrigerant charge correction. Where trips recur on hot days, Paul Industries checks whether the original selection allowed for elevation and, if it did not, adds condenser capacity, adiabatic precooling or a staging change rather than repeating the same repair each summer.

Hail-damaged condenser coils

Hail damage to condenser coils is a Colorado repair category of its own. Statewide, 2023 brought 176 reports of stones two inches across or bigger, by the Colorado Climate Center’s tally, close to twice the 91 of the 2018 record, and a single storm can flatten the fins on every exposed coil on a roof. Flattened fins block airflow; the machine then loses capacity and trips on head pressure the next hot day.

After a storm, Paul Industries inspects every exposed coil, documents the damage with photographs and measured airflow, combs fins where they can be recovered and replaces coil sections where they cannot. Where storms recur, hail guards, louvers or coated, heavier fin stock are added at the same time, so the next storm does less harm.

Water cooled chiller repair on Front Range water

Water cooled chiller repair in Colorado centers on condenser tubes and controls, because the cooling tower water and the climate behave differently from those at humid, sea-level sites. Front Range supplies such as Denver Water are soft to moderately hard and change with the seasons, harder in winter and softer during spring runoff, and Denver Water notes that its water tends to form scale. Towers concentrate those minerals, so scale and fouling in condenser tubes are the steady cause of rising approach temperatures and head pressure.

The dry climate brings a second issue. With a design wet bulb around 60 degrees Fahrenheit, as reported at Golden, cooling towers make very cold condenser water in spring and autumn. Many chillers, centrifugal machines in particular, need a minimum entering condenser water temperature for stable lift and oil return, and water colder than that causes surge, low oil pressure or trips at startup. Tower bypass valves, fan cycling and condenser water reset are the repairs; a failed bypass valve or a mis-set reset schedule is a common Colorado service call.

Common chiller faults in Colorado conditions and the first checks
SymptomLikely Colorado causeFirst checks
High head pressure trips on hot afternoonsCondenser undersized for altitude, hail-damaged fins, failed fansFan operation, coil condition, airflow, refrigerant charge
Low oil pressure or surge at spring startupCondenser water colder than the chiller’s minimumTower bypass valve, fan staging, condenser water setpoint
Rising condenser approachScale from concentrated hard waterWater treatment logs, tube inspection, cycles of concentration
Split tubes or a water-logged refrigerant circuitEvaporator or condenser frozen during a cold snapPressure test, eddy current test, moisture analysis
Frequent refrigerant additionsLeaks at vibrating joints or coil damage from stormsLeak search, federal leak rate calculation, joint inspection
Nuisance trips on low suction pressure in winterLow load and cold ambient on machines running year roundLow-ambient kit, head pressure control, load staging

A seasonal chiller repair service calendar for Colorado

A chiller repair service calendar in Colorado follows the weather more than the fiscal year, because spring and autumn are the windows for major work and winter is the season for freeze protection. Planned around those windows, most repairs happen without losing cooling when it matters.

Colorado chiller service through the year
SeasonWorkColorado reason
Late winter to early springCondenser tube cleaning, eddy current testing, compressor and motor overhaulsLowest cooling load for comfort plants; machines down before warm spells
Spring startupRefill, leak check, safeties, tower bypass and condenser water reset checksCold tower water on dry spring days causes surge and oil trouble
Early summerAir-cooled coil cleaning, fan and drive checks, charge verificationAltitude leaves little condenser margin for July afternoons
After any hailstormCoil inspection, fin combing or section replacement, fan balanceHail flattens fins and cuts airflow before the next hot day
AutumnSecond overhaul window, controls upgrades, replacementsLoad falls before freezes arrive
Before the first hard freezeDrain-down or glycol for idle machines, heat tracing, low-ambient checksArctic fronts split idle evaporator tubes

Temporary cooling and redundancy while a Colorado machine is down

Temporary cooling keeps a building on temperature when a Colorado chiller has to come out of service during the cooling season. Hospitals, data rooms, laboratories and process plants often cannot wait for a shoulder season, so the repair plan starts with the remaining capacity: which machines can carry the load, how much margin they have on a hot afternoon at altitude, and where a rental chiller or portable cooling unit would connect. Plants that were built with tapped connections for temporary equipment save days here.

Paul Industries checks the remaining machines before isolating the faulty one, arranges and connects temporary chillers where redundancy is thin, and stages the repair so the plant is never one failure away from losing cooling. For campuses and hospitals, the outage plan is agreed with the facility team in advance, including infection control or clean area procedures where they apply.

Freeze damage and winter lay-up

Freeze damage is the most expensive avoidable chiller repair in Colorado. Arctic fronts drop the temperature sharply, and a water-cooled machine with water left in an idle evaporator, or an air-cooled machine whose evaporator piping runs outdoors, can split tubes overnight. Water then enters the refrigerant circuit, contaminating the oil and refrigerant and forcing a major repair.

Protection depends on how the machine is used. Machines idle over winter are drained and blown out or filled with inhibited glycol; machines that run year round for data centers, hospitals or process loads need low-ambient kits, heat tracing and controls that keep flow through the evaporator. Paul Industries offers fall lay-up and spring startup as part of chiller repair and maintenance contracts, and checks glycol concentration and heat tracing before the first hard freeze.

Industrial and commercial chiller repair across Colorado

Commercial chiller repair in Denver, Aurora and Boulder

Commercial chiller repair in Denver, Aurora and Boulder covers office towers, hospitals, university campuses, hotels and data rooms. Most of those machines are comfort-cooling chillers under Regulation 22, so the cumulative cost record matters. Downtown and campus plants often run several machines, which lets one be repaired in spring or autumn while the others carry the load. For owners searching for chiller repair Denver options, the deciding factors are diagnostic depth, records and whether the repair plan accounts for the state rule.

Industrial chiller repair in Fort Collins, Greeley and Golden

Industrial chiller repair in the northern Front Range serves breweries, food and beverage plants, laboratories and manufacturers. Process chillers sit outside the comfort-cooling definitions of Regulation 22, but federal leak repair and record rules still apply. Glycol chiller repair is common in brewing and food plants, where low-temperature glycol loops serve fermenters and cold rooms and where glycol concentration, pump seals and plate heat exchangers are frequent service items.

Colorado Springs, Pueblo and the Western Slope

Chillers in Colorado Springs work at a higher elevation than Denver’s, so air-cooled condenser margins are thinner still. Pueblo, in climate zone 4B, has longer cooling seasons, while Grand Junction on the Western Slope pairs hot, dry summers with cold winters. Paul Industries repairs and services chillers in all three areas.

How often should chiller tubes be cleaned in Colorado?

Condenser tubes on Colorado water-cooled chillers are typically cleaned once a year, before the cooling season, with evaporator tubes on closed loops cleaned less often. How often should chiller tubes be cleaned beyond that baseline depends on the condenser approach temperature: when it climbs a few degrees above its clean value, scale or fouling is costing capacity and power, and the tubes need attention whatever the calendar says. Hard winter water and high cycles of concentration shorten the interval; reclaimed water makeup shortens it further.

Eddy current testing of tubes every few years, or after any freeze event, shows wall loss before a tube fails. Paul Industries trends approach temperatures from operating logs, cleans tubes mechanically or chemically as the deposit requires, and keeps test results so retube decisions are made on evidence.

What does chiller repair cost in Colorado?

Chiller repair cost in Colorado depends on the machine type and size, the fault, the parts, refrigerant price and availability, and whether the work has to be done in a live plant with temporary cooling. Leak repairs and controls work sit at the low end; compressor overhauls, motor replacements and retubes at the high end. In Colorado the capital cost of each component replacement on a pre-2024 comfort chiller also counts toward the Regulation 22 threshold, so a quote is worth reading against the running total as well as the budget.

Paul Industries quotes chiller repairs with parts, refrigerant, labor and any temporary cooling shown separately, and with the effect on the Regulation 22 cumulative total stated on the quote for comfort-cooling machines. Where replacement becomes the better path, the quote includes a budget for a compliant machine selected for the site’s elevation.

Who services chillers across the Front Range and the Western Slope?

Paul Industries services chillers in Colorado as a chiller service company and chiller repair company headquartered at 256 Shore Drive, Kilmarnock, Virginia. The company, formerly based in northern New Jersey, then Pennsylvania, takes chiller work throughout Colorado as well as in all 50 states, and handles diagnostics, leak repair, compressor and motor overhauls, tube cleaning and retubing, controls repair, freeze protection, and replacement with a compliant machine where repair no longer makes sense. Its chiller repair services cover centrifugal chiller repair, screw and scroll machines, absorption units and process chillers, and HVAC chiller repair on comfort-cooling plants.

Owners comparing chiller repair companies in Colorado should ask how the firm tracks Regulation 22 costs, how it corrects for altitude, and what records it delivers. Paul Industries provides the repair, the records and, where replacement is due, supply-only delivery of a new machine, design-build of a new plant, or complete installation. Its data center cooling in Colorado and data center commissioning in Colorado pages cover critical cooling plants, and the data center mechanical contractor in Colorado page covers new plant construction.

Paul Industries for Colorado chiller plants

Paul Industries keeps Colorado chillers running with repairs planned against the state rule, the weather and the season. The same service is described for its headquarters state on chiller repair in Virginia, and in California, which also runs a state refrigerant program, on chiller repair in California. Plants with boilers as well as chillers are covered under boiler repair in Colorado, and the Colorado hub and Southwest page give the wider picture. Send the chiller make, model, serial number, refrigerant and fault history, and request a quote.

Standards referenced: Colorado Regulation 22, Part B, Section I (5 CCR 1001-26) · EPA AIM Act Technology Transitions rule · EPA Emissions Reduction and Reclamation rule, 40 CFR 84.106 · Clean Air Act Section 608 · ASHRAE 15 Safety Standard for Refrigeration Systems · AHRI 700 refrigerant purity · 2021 International Mechanical Code

Frequently asked questions

Who repairs chillers in Denver and Aurora office buildings and hospitals?

Paul Industries repairs centrifugal, screw and scroll chillers in Denver and Aurora office buildings, hospitals, hotels and campuses. Repairs are planned around the building’s redundancy and the season, with temporary cooling where needed, and each repair on a pre-2024 comfort chiller is logged against the Regulation 22 cumulative cost total. Call 201-450-8280 or request a quote.

Does Paul Industries provide chiller service in Fort Collins, Loveland and Greeley?

Yes. Paul Industries provides chiller service and repair in Fort Collins, Loveland, Greeley and the rest of northern Colorado for breweries, food plants, laboratories, campuses and commercial buildings. Industrial chiller service there often includes glycol loops for fermentation and cold storage, while comfort chillers in offices and schools are tracked against the state refrigerant rule.

Who handles chiller repair in Colorado Springs and Pueblo?

Paul Industries handles chiller repair in Colorado Springs and Pueblo, including air-cooled machines at higher elevation and water-cooled plants with longer cooling seasons on the southern plains. Repairs include condenser fan and coil work, compressor overhauls, leak repair and controls, with altitude taken into account whenever capacity problems recur.

Can an HFC-134a chiller still be repaired in Colorado?

Yes, if it was acquired before January 1, 2024. Regulation 22 lets existing comfort chillers keep running and be serviced with their original refrigerant. Protection ends if the machine is converted to a different refrigerant after that date or if cumulative component replacement capital costs exceed 50 percent of the cost of replacing the whole system, at which point the chiller is treated as new.

Does Colorado's chiller rule apply to brewery and process chillers?

The chiller definitions in Regulation 22 cover centrifugal and positive displacement chillers intended for comfort cooling of occupied spaces and expressly exclude industrial process cooling and refrigeration. A brewery glycol chiller or a plastics process chiller is therefore outside that section, though federal EPA refrigerant management and leak repair rules still apply.

What counts toward the 50 percent threshold under Regulation 22?

Capital cost under the rule includes engineering, purchase and installation of components, instrumentation, and contractor and construction fees. Replacements made after January 1, 2024 are added together and compared with the capital cost of replacing the whole system. Adding components to increase capacity makes the chiller new regardless of cost.

Should a Colorado owner keep repairing an R-22 comfort chiller?

Sometimes. R-22 machines may keep operating, but only reclaimed or stockpiled refrigerant is available to service them. In Colorado, the existing-equipment protection in Regulation 22 does not extend to a comfort chiller retrofit to another refrigerant after January 1, 2024, so conversion to a listed HFC such as R-407C is not a safe path. Most R-22 machines with major faults are better replaced with a compliant chiller.

How often do chillers need to be replaced when they run at Colorado elevations?

Chiller life varies with machine type, duty and maintenance, and Colorado conditions shorten it where air-cooled condensers run near their limit at altitude or suffer repeated hail damage. Replacement usually becomes the better choice when major repairs pile up, efficiency lags, refrigerant supply is a problem or Regulation 22 costs near the threshold.

How long does it take to replace a chiller, from order to startup, at a Colorado hospital or campus?

Lead time for a new chiller varies with size and type, and the on-site work of removing the old machine, setting and piping the new one, and starting it up takes days to a few weeks depending on rigging, access and controls. In Colorado, replacements are usually scheduled for spring or autumn, outside peak cooling and before the hard freezes.

What does chiller repair cost in a Colorado plant?

Small repairs such as controls faults, fan motors and leak repairs cost far less than compressor overhauls, motor replacements or retubes. The price depends on the machine, parts, refrigerant and whether temporary cooling is needed. Paul Industries itemizes each quote and, for pre-2024 comfort chillers, states how the repair affects the Regulation 22 cumulative total.

What are chiller maintenance requirements in Colorado?

Requirements come from the manufacturer, the federal refrigerant rules and good practice: daily or continuous operating logs, annual condenser tube cleaning and inspection, periodic eddy current testing, oil and refrigerant analysis, leak inspections and leak rate records for HFC systems, and fall lay-up and spring startup for machines idle in winter. Air-cooled units add coil cleaning and post-hail inspections.

Why do Colorado chillers trip on high head pressure in July?

Thin air reduces condenser airflow by mass, so air-cooled machines run near their limit on hot afternoons, and any extra loss such as dirty or hail-bent fins, a failed fan or a weak motor tips them into high-pressure trips. Water-cooled machines trip when scale fouls condenser tubes. Fixing the cause, not resetting the trip, ends the cycle.

Why does a centrifugal chiller surge in a Colorado spring?

Dry air and a low wet bulb let cooling towers make very cold condenser water on cool days, and many chillers need a minimum entering condenser water temperature for stable operation and oil return. Surge, low oil pressure or startup trips follow. Tower bypass valves, fan staging and condenser water reset correct it, and checking them is part of spring startup.

Can a frozen chiller evaporator be repaired?

Often, depending on the damage. Split tubes are found by pressure and eddy current testing and are plugged or the bundle is retubed. If water entered the refrigerant circuit, the oil and refrigerant are removed, the circuit is dehydrated and filters and driers are replaced before recharge. Compressor inspection may be needed. Prevention through drain-down or glycol is far cheaper.

Can a chiller repair service keep a Colorado hospital cooled during an outage?

Yes, with planning. The remaining chillers are checked for margin at altitude on a hot day, temporary chillers are connected where redundancy is thin, and the repair is staged so critical areas never depend on a single machine. Paul Industries agrees the outage plan with the hospital’s facility team, including infection control steps, before the faulty chiller is isolated.

Does Paul Industries repair glycol chillers at Colorado breweries?

Yes. Paul Industries repairs glycol chillers, pumps, plate heat exchangers and distribution piping at breweries, distilleries and food plants across Colorado. Typical work includes glycol concentration and inhibitor checks, pump seal and motor repair, compressor service, leak repair and controls, scheduled around production so fermentation and cold rooms stay on temperature.

What does Paul Industries need from a Colorado owner to price a chiller repair?

Send the chiller make, model and serial number, refrigerant type and charge, whether it serves comfort or process cooling, the date it was acquired, alarm history and recent operating logs, the last service report, and a list of major component replacements since January 1, 2024 with their costs. That lets Paul Industries plan the diagnosis and state the Regulation 22 position.

Is water chiller repair different on Colorado's hard winter water?

The repairs are the same, but the causes skew toward scale. Front Range water is harder in winter, and towers concentrate those minerals, so condenser tubes foul faster when treatment is not adjusted to the season. Water chiller repair in Colorado therefore pairs tube cleaning with a review of the tower treatment program and blowdown setpoints.

Need a chiller repaired anywhere in Colorado?

Send the chiller make, model, serial number, refrigerant, fault history and recent logs. Call 201-450-8280 or request a quote.