Paul Industries is a data center mechanical contractor in Missouri for central plants, campus chilled water and condenser water piping, air handling, CDUs and liquid cooling loops, generator and plant support systems, and the controls that tie them together, on campuses in the Kansas City Northland, Independence, St. Louis, St. Charles County and the Interstate 70 corridor. Missouri’s data center build-out arrived fast in 2025 and 2026, with multi-billion dollar campuses announced near Kansas City and in Montgomery County, a state tax exemption that reaches construction materials, and power contracts that stretch each campus over years. Paul Industries, headquartered at 256 Shore Drive in Kilmarnock, Virginia, builds data center mechanical systems across Missouri and in all 50 states.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Tax exemption RSMo 144.810: new site at least $25 million and 10 jobs within 36 months
Exemption term Up to 15 years for a new facility, 10 for an expansion
Power contracts Large-load tariffs: 12-year minimum, optional 5-year ramp (PSC)
Site work DNR land disturbance permit at one acre or more
Reviewed November 2026

Data center mechanical contractor in Missouri: the scope in one contract

A data center mechanical contractor in Missouri builds every system on the campus that carries heat or fluid: chillers, towers or dry coolers, pumps, the chilled water and condenser water mains, CRAH galleries or fan walls, CDUs and the facility water for liquid-cooled rows, generator fuel, cooling and exhaust support systems, domestic and process water, and the plant controls. Paul Industries carries that whole list under one contract, from data center mechanical design through fabrication, installation, testing, startup and service, so one schedule and one set of records cover the plant.

The national page for this work is data center mechanical contractors. This page covers what changes in Missouri: who is building, the state tax exemption, power contracts and phasing, the permits and codes a build passes through, winter construction, and how the work differs between Kansas City, St. Louis and the rural campuses.

The contract continues after turnover. A campus that will add buildings for years needs the same firm to service the plant already running, because the people who maintain the chillers, coolers and pumps also know where every future valve and capped header sits. Paul Industries offers service agreements for the completed phases while later phases are under construction: seasonal maintenance, water treatment, filter and strainer service, controls support and repairs, with the operating history feeding the design of the next building. For an owner, that means one set of drawings, one equipment database and one firm answering for the plant from the first chiller to the last, including the condenser water, glycol and fuel systems that sit outside the white space and are easiest to overlook when attention moves to the next building.

Who is building data centers in Missouri, campus by campus?

Who is building data centers in Missouri is a matter of public record for the big projects: hyperscale operators and developers have announced campuses in the Kansas City Northland, in Independence, in Montgomery County near New Florence and inside the City of St. Louis, at different stages from operating to under construction to proposed. The table lists the projects named in public sources as market facts. They appear here as a guide to where mechanical work in the state is concentrated.

Hyperscale data centers in Missouri named in public sources (status as reported)
ProjectLocationReported statusMechanical implication
Golden Plains Technology Park (Meta’s first building)Kansas City Northland, 882-acre parkFirst building opened August 2025, per the developerFurther buildings on a large park; plant and piping built in phases
Google, Hunt Midwest Business ParkKansas City$1 billion plan confirmed March 2024Campus build on business park land
Nebius campusIndependence, eastern Jackson CountyGround broken May 2026; up to four buildings over three to five yearsClosed-loop cooling; mains sized for later buildings
Google campusNew Florence, Montgomery County$15 billion announced May 2026; reported under construction June 2026Air cooling with limited water; large yard equipment counts
Amazon campusMontgomery County, east of New FlorenceCounty abatements December 2025; reported under construction, tentative 2032 completionLong, phased build on a rural site
Midtown data center (former warehouse)City of St. LouisConditional use permit with conditionsClosed-loop cooling, sound and heat measures in an urban building

Beyond those, the list of proposed data centers in Missouri changes month to month, with new sites raised at city and county meetings across the state. Some planned data centers in Missouri stall before construction; the ones that go ahead will follow the same path through land, power contracts, tax agreements and permits. For owners weighing future data centers in Missouri, the mechanical questions are settled in the same order every time: power and phasing, water strategy, heat rejection, and how the first building’s plant will serve the last.

Are data centers tax exempt in Missouri? Missouri data center incentives under section 144.810

Data centers in Missouri can be exempt from state sales and use tax, and from the sales taxes cities and counties levy, on utilities, machinery, equipment, computers and construction materials under section 144.810 of the Missouri statutes, if the project meets the investment and job thresholds and receives approval from the Department of Economic Development. A new data storage center qualifies with at least $25 million of investment and at least ten new jobs, each within up to 36 months; an expanding facility qualifies with at least $5 million of net new investment within up to 12 months and at least five new jobs within up to 24 months. The new jobs must pay at least 150 percent of the county average wage, and the exemption is capped at the project’s projected net fiscal benefit to the state over ten years.

Section 144.810 thresholds and terms for a data storage center
ItemNew data storage centerExpanding facility
Minimum investment$25 million within up to 36 consecutive months$5 million net new within up to 12 consecutive months
Minimum new jobs10 within up to 36 months5 within up to 24 months
Wage floor for new jobs150% of county average wage150% of county average wage
What can be exemptUtilities, machinery, equipment, computers, construction materialsUtilities above prior use, machinery and equipment, construction, repair or remodeling materials
LengthUp to 15 years from conditional approvalUp to 10 years

The exemption shapes the mechanical contract. Chillers, pumps, coolers, pipe, valves and fittings bought for an approved project can fall under it, but only with the right exemption documents in hand at purchase and with records that tie each item to the approved facility. Paul Industries sets up purchasing for an approved project so exempt materials are bought under the owner’s documentation, tracks them by building and phase, and hands over the records the owner needs for its annual reporting. These Missouri data center tax incentives sit alongside city and county abatements, such as the Chapter 100 abatement Independence approved in March 2026, which are negotiated separately.

How do Missouri’s long power contracts shape a phased mechanical build?

Missouri’s large-load power contracts set the pace of a mechanical build because they run for at least 12 years with an optional five-year ramp, so a campus takes its power, and builds its cooling, in steps. Under the tariffs approved for Ameren Missouri and Evergy after 2025 Senate Bill 4, the customer pays its full cost of service and commits to minimum bills, which gives owners every reason to match cooling capacity to contracted power rather than build it all on day one.

For the mechanical contractor, phasing means designing the first phase for the last one. Chilled water and condenser water mains, yard headers and pipe racks are sized for build-out; valved and capped connections wait for future plant; controls networks are laid out for equipment that will arrive years later. Paul Industries builds those provisions into phase one and keeps a phase map that shows where every future tie-in lands, so later phases connect without shutting down the plant that is already carrying load.

Data center construction: Missouri permits and codes a project passes through

Data center construction in Missouri passes through state environmental permits, city or county building permits and, for pressure equipment, the state boiler and pressure vessel program. The Department of Natural Resources requires a land disturbance permit when a project disturbs an acre or more, and its Air Pollution Control Program may require a construction permit before construction when backup generators push emissions above de minimis levels. Facilities with the capacity to withdraw 100,000 gallons a day or more register as major water users.

Building, mechanical and plumbing permits come from the city or county, because Missouri has no statewide building code for private commercial buildings. Kansas City, St. Louis County, St. Charles County and rural counties each adopt their own editions, and some add their own rules: the City of St. Louis passed a data center framework in September 2026 that classifies facilities by size, sets where they may go and restricts light and sound. Boilers, water heaters above 200,000 Btu per hour and covered pressure vessels must be built to the ASME code and registered with the National Board before the state inspection that allows them to run. Paul Industries checks each requirement during submittals, so equipment arrives with the nameplates and data reports the Division of Fire Safety expects.

Which mechanical design decisions lock in a Missouri campus?

Data center mechanical design on a Missouri campus turns on a few decisions made early, because each one fixes equipment, yard space and piping for every later phase. Data center mechanical engineers on the owner’s team and Paul Industries settle them together before the first phase is bid.

Early data center mechanical design decisions on a Missouri campus
DecisionOptionsMissouri factor
Heat rejectionOpen towers, adiabatic coolers, dry coolers or air-cooled chillersHumid summers favor towers on power; water strategy and permit conditions favor dry
Liquid cooling shareAir only, hybrid rows, liquid-first hallsNew hyperscale halls are built for dense racks; facility water class set early
Facility water temperatureCold water for air, warm water for liquid, or two loopsWarm water lengthens free cooling through long Missouri winters
RedundancyN+1, N+2, 2N plant and distributionSets equipment counts and pipe routes for every phase
Freeze strategyGlycol, drain-down, heat tracing, enclosed yardAbout 107 freezing nights a year in Kansas City

The data center mechanical systems that follow from those choices, and the data center mechanical equipment lists that go out for purchase, are then fixed for the life of the campus. Changing a heat rejection choice after the first building means a costly redesign, while getting it right at the start costs only engineering time.

Building through Kansas City freezes: prefabrication and winter hydrotests

Winter construction on a Missouri campus is shaped by cold rather than snow, because Kansas City averages about 107 days a year with a low at or below 32 degrees and January lows near 20. Water-filled pipe, open tanks and freshly tested systems freeze overnight, and welding outdoors slows when wind and cold set in. Paul Industries moves as much fabrication as possible off site: pipe spools, pump and valve assemblies and headers are prefabricated, tested and tagged, then delivered for installation in the order the schedule needs them. Field hydrostatic tests in winter use heated enclosures, glycol test media where the specification allows, or drain and blow-down immediately after the hold, so no section sits full of water through a freezing night.

Prefabrication also helps the schedule in summer, when St. Louis and Kansas City heat slows field work, and it makes the same spool and skid designs repeatable from building to building on a phased campus. Each prefabricated assembly carries its weld, test and material records, which join the turnover package for the phase.

Generator, fuel and support systems on a Missouri campus

Generator support systems on a Missouri data center campus are mechanical work too: diesel fuel storage and day tanks, fuel transfer pumps and piping, fuel polishing, generator jacket water heaters, radiator or remote cooler piping, exhaust systems and the ventilation that keeps generator enclosures within temperature on a 90 degree afternoon or a zero degree night. Each backup generator also brings an emissions question, because the Department of Natural Resources may require an air construction permit before construction when the fleet pushes potential emissions above de minimis levels, and permit conditions often limit run hours and fuel. Paul Industries builds fuel and generator support piping to the adopted mechanical and fire codes, includes the storage tank requirements that apply to the chosen tanks, and coordinates test runs with the permit so the hours used in commissioning are recorded from the first start. Winter adds jacket water heat and fuel temperature control, since cold diesel thickens and filters can clog, and summer adds enclosure ventilation sized for the hottest Missouri days.

Water, sewer and storm water service for a Missouri campus

Water and sewer service for a Missouri campus is planned with the city or water district and the sewer authority, because the state does not permit reasonable in-state water use and leaves supply contracts, sewer connections and pretreatment limits to those utilities. A tower plant needs makeup capacity for evaporation and blowdown and a sewer connection that accepts blowdown chemistry; a closed-loop or air-cooled plant needs a large one-time fill and small makeup, and far less sewer capacity. Storm water from roofs, yards and equipment pads runs to detention under the site’s land disturbance and building permits, and Independence has stated that cooling water on its campus does not enter the stormwater system. Paul Industries designs the domestic, makeup, fill and drain piping, backflow protection, metering and the blowdown connection to the utility’s terms, and installs the water treatment equipment that keeps cooling water inside its chemistry limits. Where a campus can withdraw 100,000 gallons a day or more from its own wells or surface intake, registration as a major water user with DNR is added to the permit list.

Data center construction in Kansas City, St. Louis and rural Missouri

Missouri data center building work differs by region in site type, utility and logistics more than in the mechanical systems themselves. Data center construction Kansas City developers run in the Northland and Independence is large phased campuses on open land; data center construction St. Louis projects lean toward conversions of existing buildings and expansions inside occupied campuses; and the rural campuses along Interstate 70 bring long yard runs, remote laydown and large equipment counts. For data center construction, Independence, MO, adds a municipal utility and a city that has published its cooling and water expectations.

Missouri regions and what changes for the mechanical contractor
RegionTypical projectMechanical emphasis
Kansas City NorthlandPhased hyperscale buildings on park landRepeatable plants, campus mains, prefabricated spools
IndependenceMulti-building campus under constructionClosed-loop systems, phase tie-ins, municipal power coordination
City of St. Louis and St. Louis CountyConversions, colocation, enterprise expansionsWork inside existing structures, sound limits, roof and courtyard equipment
St. Charles CountyEnterprise and colocation hallsExpansions next to live plants, tie-ins without outages
Montgomery County and the I-70 corridorRural hyperscale campusesAir cooling, long yard piping, large laydown and delivery planning

Public data center projects and Missouri prevailing wage

Public data center projects in Missouri, such as state agency, university and city facilities, are public works under the Missouri Prevailing Wage Law, sections 290.210 to 290.340, and pay at least the hourly rates in the annual wage order for the county and trade. Private campuses fall outside the law unless a public body is the owner or the contract makes it apply. Paul Industries builds public bids on the county wage order and keeps the payroll records the law requires for each pay period.

How much does it cost to build a data center in Missouri? The mechanical share

How much does it cost to build a data center in Missouri depends on IT capacity, density, redundancy, the cooling method and the number of phases, and the public announcements give a sense of scale: $1 billion for the Hunt Midwest plan, $15 billion for the Montgomery County campus. The mechanical share of a project is driven by the heat rejection choice, the amount of liquid cooling, the redundancy level, the length of campus piping, winter construction measures and how much of the work happens next to live systems. Paul Industries gives a budget range from comparable scope once the IT load, phasing and cooling approach are known, then a firm price for each phase as its design is completed.

Owners can buy from Paul Industries in three ways: supply-only for chillers, coolers, pumps, skids and prefabricated spools; design-build of the whole mechanical plant to a performance target; or complete installation to the owner’s engineered design. Pricing separates equipment, prefabrication, field labor, testing and startup, and tracks exempt materials separately where section 144.810 applies.

Who builds data centers’ mechanical systems in Missouri?

Paul Industries builds data center mechanical systems in Missouri: central plants, campus piping, air handling, liquid cooling loops, generator support systems and controls, on new campuses in the Kansas City area and along Interstate 70 and on halls in St. Louis and St. Charles County. Owners comparing data center contractors, data center HVAC contractors and Missouri mechanical contractors for this work look for one firm that designs, fabricates, installs, tests and services the plant, and Paul Industries does all of it under one contract with one schedule.

Among data center mechanical contractors working in the state, Paul Industries also covers the data center construction MEP coordination on the mechanical side: routing, supports, clearances and sequencing with electrical and controls work in the same spaces. Related Missouri pages go deeper on parts of the plant: data center cooling in Missouri, data center liquid cooling in Missouri, data center commissioning in Missouri and process piping in Missouri. In the headquarters state, see data center mechanical contractor in Virginia; in a neighboring Midwest state, data center mechanical contractor in Illinois. The region page is Midwest, the industry page is data centers, and the state hub is Missouri.

Missouri data center mechanical work from Paul Industries

Paul Industries designs, prefabricates, supplies, installs, tests, starts up and maintains data center mechanical systems across Missouri: chilled water and condenser water plants, towers and dry coolers, CRAHs and fan walls, CDUs and liquid cooling loops, campus piping, generator support systems and plant controls. Work covers new hyperscale campuses, phased expansions, building conversions and live-site upgrades, with tax-exempt purchasing records kept where the state exemption applies. Call 201-450-8280 or request a quote.

Standards referenced: RSMo 144.810 (Missouri data storage center sales and use tax exemption) · Missouri PSC large-load tariffs under 2025 Senate Bill 4 · Missouri DNR land disturbance and air construction permits · Missouri boiler and pressure vessel law, RSMo 650.200 to 650.295 · Missouri Prevailing Wage Law, RSMo 290.210 to 290.340 · ASME B31.9 and B31.1 piping · ASHRAE 90.4 · ASHRAE 15

Frequently asked questions

Who builds data center mechanical plants in the Kansas City Northland?

Paul Industries builds data center mechanical plants in the Kansas City Northland and across the metro: chillers, towers or dry coolers, campus mains, air handling and liquid cooling loops, with prefabricated spools and phase-by-phase tie-ins. Campuses there are built over several years, so the first phase is designed to serve the last. Call 201-450-8280 to discuss a Northland campus.

Which contractor handles data center mechanical work in St. Louis buildings?

Paul Industries handles data center mechanical work in St. Louis buildings, including conversions of existing structures, colocation fit-outs and expansions of operating enterprise halls. Urban sites bring sound limits under the city’s 2026 framework, tight rigging and roof or courtyard equipment, and work next to systems that stay in service. Paul Industries plans each tie-in around the owner’s redundancy.

Are new data centers in Missouri required to use closed-loop cooling?

Missouri has no statewide rule requiring closed-loop cooling, and the state does not permit reasonable in-state water use. Cities and approvals can add conditions: the St. Louis Midtown permit requires a closed-loop system, and Independence has published closed-loop water figures for its campus. Paul Industries designs the cooling method each approval and water supply call for.

Do mechanical materials qualify for the Missouri data center tax exemption?

Section 144.810 can exempt machinery, equipment and construction materials for an approved data storage center from state, city and county sales and use tax, within the terms of the Department of Economic Development approval. Exempt purchasing needs the right documents at the time of sale and records that tie materials to the facility. Paul Industries sets up purchasing and records to match the approval.

How long do data centers under construction in Missouri take to finish?

Large Missouri campuses are being built in phases over several years: Independence describes three to five years for up to four buildings, and Montgomery County officials have cited 2032 as a tentative completion for one campus. Each building’s mechanical work runs on a shorter cycle within that span. Paul Industries plans procurement and prefabrication to keep each phase on its power date.

How does the Missouri power contract term affect mechanical design?

Large-load tariffs approved for Ameren Missouri and Evergy run at least 12 years with an optional five-year ramp, so owners add cooling as power arrives. Mechanical design responds with mains and headers sized for build-out, valved connections for future plant and controls laid out for later equipment. Paul Industries keeps a phase map so each tie-in lands where it was planned.

What permits does a Missouri data center need before mechanical work starts?

Before site work, a land disturbance permit from DNR is needed if an acre or more will be disturbed, and an air construction permit may be needed for backup generators. Building, mechanical and plumbing permits come from the city or county. Pressure equipment needs ASME construction, National Board registration and a state inspection certificate before operation. Paul Industries tracks each permit that touches the mechanical scope.

Can data center mechanical work continue through a Missouri winter?

Data center mechanical work continues through Missouri winters with prefabrication off site, heated enclosures for field welding and testing, and freeze-safe hydrotest practices, such as draining and blowing down sections right after the test hold. Kansas City averages about 107 freezing nights a year, so these measures are planned from the start. Paul Industries schedules winter work to keep phases moving.

What does a data center mechanical contractor deliver at turnover?

At turnover the owner receives pressure test and flushing records, weld and material records, equipment startup sheets, functional test results, control sequences, as-built drawings, valve tags, maintenance schedules, and, for pressure equipment, nameplates, data reports and inspection certificates. On tax-exempt projects, purchase records by phase are included. Paul Industries assembles the package for each phase.

Does Missouri's Prevailing Wage Law reach a public agency's data hall build?

Public data center projects owned by a state agency, university, city or other public body are public works under Missouri’s Prevailing Wage Law and pay at least the rates in the annual wage order for the county and trade. Paul Industries prices those projects on the wage order and keeps the payroll records required for each pay period.

What is included in data center mechanical systems on a Missouri campus?

Data center mechanical systems include chillers, cooling towers or dry coolers, pumps, chilled and condenser water piping, air handling or fan walls, CDUs and facility water for liquid cooling, generator fuel, cooling and exhaust support systems, domestic and process water, fire protection coordination and plant controls. Paul Industries builds all of these under one contract on Missouri campuses.

How are mechanical tie-ins made on a live Missouri campus?

Tie-ins on a live campus use isolation valves installed for the purpose, hot taps or line stops, made one redundant path at a time after the owner confirms remaining capacity. Temporary cooling bridges any gap. Each new section is tested and flushed before it opens to the live system. Paul Industries writes the method statement with the operations team before each tie-in.

What cooling do the data centers being built in Missouri use?

Both appear in Missouri. The Montgomery County campus announced by Google describes air cooling with water limited to uses such as kitchens, Independence describes a closed-loop system, and other campuses use cooling towers. The choice depends on water supply, approvals, power cost and rack density. Paul Industries builds each type and runs the comparison for the owner’s site.

Which project details let Paul Industries price a Missouri mechanical package?

Send the IT load and phasing, rack densities and liquid cooling plans, redundancy level, the cooling approach or performance target, site plans, utility and water information, and any approval conditions on sound or water. State whether the project has a section 144.810 approval. Paul Industries returns a budget range, then a firm price per phase. Call 201-450-8280 or request a quote.

Does Paul Industries offer supply-only equipment packages for Missouri data centers?

Paul Industries supplies chillers, dry coolers, pumps, skids, CDUs and prefabricated pipe spools as supply-only packages, and also offers design-build and complete installation. Supply-only packages come with factory test records, submittals and startup support, and tie into the owner’s schedule for each phase. Exempt purchases under an approved project are documented to the owner’s requirements.

Which proposed data centers in Missouri reach construction?

Proposed data centers in Missouri reach construction once they hold land, a signed power contract under the utility’s large-load tariff, city or county approvals and any tax agreements, and those steps take months to years. Projects that announce investment figures and break ground, such as the Independence campus in May 2026, have cleared most of them. Paul Industries prices mechanical scope at any of these stages so owners can budget before final approvals.

Where are future data centers in Missouri likely to go?

Recent projects point to sites with large parcels, high-voltage transmission and water or a water-light cooling plan: the Kansas City Northland and Independence, Montgomery County on Interstate 70 and selected St. Louis area sites. Proposals have surfaced in other counties as well. Paul Industries builds mechanical plants wherever in Missouri the owner settles.

Building a data center campus or hall in Missouri?

Send the IT load and phasing, redundancy level, cooling approach, site plans and any approval conditions on water or sound. Call 201-450-8280 or request a quote.