Paul Industries is a data center mechanical contractor in Louisiana, building chiller plants, heat rejection yards, chilled water and liquid cooling piping, pump and CDU systems, fuel and gas piping and the controls that tie them together for new campuses and expanding halls across the state. Louisiana’s data center market went from enterprise and colocation halls to gigawatt-scale campuses within two years, and the mechanical package is now the longest and most labor-intensive part of many of those builds. Paul Industries carries that package under one contract from its headquarters at 256 Shore Drive, Kilmarnock, Virginia, taking work across Louisiana and in all 50 states.
Request a quote or call 201-450-8280
What does a data center mechanical contractor in Louisiana build?
A data center mechanical contractor in Louisiana builds everything that moves heat out of the IT equipment and keeps the building’s critical systems supplied: chillers, dry coolers and cooling towers, primary and secondary pumping, headers and distribution piping, air handlers and fan walls, coolant distribution units and liquid cooling manifolds, water treatment, fuel oil and natural gas piping for generators, and the building automation that runs them. On a campus, the scope also includes the central utility plant, the underground and overhead pipe racks between buildings, and the tie-ins that let each new phase join the running plant.
The national overview of that scope is on the data center mechanical contractors page. This page covers how the job is shaped in Louisiana: the campuses being built, the licensing and wage rules, the code edition change in 2027, the utilities, the storms and the logistics of building at this scale.
How many data centers are under construction in Louisiana?
Louisiana has one hyperscale campus under construction and a second program announced as planned, according to Louisiana Economic Development, alongside the enterprise, university, government and colocation halls that have operated in its cities for years. The campus already being built is Meta’s Richland Parish Data Center in Holly Ridge; the planned program is three Amazon campuses developed by STACK Infrastructure in Caddo and Bossier parishes. Both are market facts for owners planning their own work, not Paul Industries projects. A data center under construction in Louisiana today is therefore most likely to be either one phase of a very large north Louisiana campus or a smaller enterprise, university or colocation building in Baton Rouge, New Orleans, Lafayette or Shreveport.
| Program | Parish | Construction workforce published | Infrastructure the owner funds, as published | Mechanical meaning |
|---|---|---|---|---|
| Meta Richland Parish Data Center | Richland | About 7,500 construction jobs at peak | Seven new gas-fueled plants and three grid-scale batteries through Entergy Louisiana | Central plants and pipe racks built in many phases over years |
| Amazon campuses developed by STACK Infrastructure | Caddo and Bossier | Up to 2,250 construction jobs | New energy infrastructure and grid upgrades; up to $400 million in public water infrastructure | Hybrid air and water cooling with water connections sized for peak days |
Every new data center Louisiana parishes have approved since 2024 is being built in a state that is also running refineries, chemical plants and LNG terminals and starting large industrial builds such as the $5.8 billion Hyundai Steel plant in its early stages near Donaldsonville. Equipment orders, crane time and fabrication capacity are planned against that backdrop, so mechanical scope on a Louisiana campus benefits from early procurement, prefabrication and a schedule that moves work off the critical path wherever possible.
Louisiana contractors license rules on a data center mechanical package
Louisiana contractors license rules reach a data center mechanical package through the State Licensing Board for Contractors, whose published requirements say that commercial projects valued at $50,000 or more must be bid or performed under a commercial contractor license, and that electrical, mechanical and plumbing work requires a license once a project exceeds $10,000. Trade packages above those values are covered by the same law. Work on underground storage tanks, such as buried generator fuel tanks, falls under it from the first dollar.
The board sorts commercial work into major classifications and subclassifications, and the work on a data center campus spans several of them. The table lists the ones that typically apply to the mechanical scope, stated as requirements of the work.
| Classification | Data center work it covers | Threshold in the board’s published requirements |
|---|---|---|
| Mechanical, 6.1 Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration | Chillers, air handlers, fan walls, ductwork, refrigerant piping | Projects exceeding $10,000 |
| 3.4 Industrial Pipe Work and Insulation | Large-bore chilled water and condenser mains, pipe racks, insulation | Commercial projects of $50,000 or more |
| Plumbing | Domestic water, makeup water connections, drains, backflow protection | Projects exceeding $10,000 |
| Electrical, 5.1 Electrical Controls and Instrumentation and Calibration | Building automation, control valves, sensors and calibration | Projects exceeding $10,000 |
| Hazardous Materials, underground storage tanks | Buried diesel tanks for standby generators | From one dollar |
Licensing is separate from permits and inspections, which follow the Louisiana Uniform Construction Code as enforced for the parish or municipality where the campus sits. Paul Industries plans submittals and inspections into the schedule for each phase.
Wage law on Louisiana data center construction
Louisiana has no state prevailing wage law; the U.S. Department of Labor lists it among the states without one and notes that the state law was repealed in 1988. Privately funded data center construction in Louisiana therefore sets wages by contract and market, while federally funded or assisted construction carries federal Davis-Bacon wage rates. Owners using public financing, federal grants or public infrastructure tied to a campus should confirm which parts of the work, if any, carry federal wage requirements, because the answer can differ between the private campus and the public water or road work around it. Paul Industries prices each package on the wage basis that applies to it and keeps the weekly payroll records that federal rules call for, so the owner’s funding audit has what it needs.
Code editions and data center mechanical design in Louisiana
Data center mechanical design in Louisiana follows codes adopted for the whole state by the Louisiana Uniform Construction Code Commission, which currently enforces the 2021 International Mechanical, Fuel Gas, Plumbing and Building codes and the 2021 International Energy Conservation Code, with Louisiana amendments. The commission has set January 1, 2027 for the move to the 2024 ICC editions and the 2023 National Electrical Code.
For a phased campus, the edition change means early buildings and later buildings may be permitted under different codes. Paul Industries tracks which edition each permit falls under, keeps details that differ between editions visible in the drawings, and designs the central plant and shared pipe racks so they satisfy the later edition where that is practical. Mechanical piping inside buildings is designed and tested to ASME B31.9, and high-pressure steam or larger power piping, where a campus has it, to ASME B31.1.
Utilities and the mechanical schedule on a Louisiana campus
Utilities set the mechanical schedule on a Louisiana campus, because chillers and pumps cannot be started at full load until permanent power arrives. Entergy Louisiana serves the Richland Parish campus, where LED reports Meta is funding seven new gas-fueled generating plants and three batteries; SWEPCO serves the northwest Louisiana campuses. When generation and transmission are being built at the same time as the halls, energization dates move, and the mechanical sequence has to absorb that movement.
Paul Industries builds the sequence so work needing little power, such as pipe installation, pressure testing, flushing and controls checkout, runs first, and full-load startup follows energization. Installed equipment that waits for power is protected from weather and construction dust, shafts are rotated on schedule, and warranty start dates are coordinated with the manufacturer. Low Louisiana tariffs, 5.61 cents per kilowatt-hour for industrial customers in 2024 against 8.13 nationally (EIA), make temporary power for testing less of a burden than in many states.
Generator fuel, gas piping and storage tanks
Generator fuel, gas piping and storage tanks are part of the mechanical scope on most Louisiana data centers, because standby generation is what keeps the cooling plant running through a utility loss. Diesel generators need belly tanks or bulk storage with transfer pumps and day tanks; natural gas generators and gas-fired equipment need service lines, regulators and distribution piping built to the 2021 International Fuel Gas Code as adopted in Louisiana.
Buried fuel tanks are regulated by LDEQ’s Underground Storage Tank Division under LAC 33:XI, and work on them falls under the state contractor licensing law from the first dollar. Aboveground tanks need secondary containment, overfill protection and fire code separation. Paul Industries designs fuel systems for the run time the owner specifies, with storage sized for the days after a storm when deliveries may be interrupted, and installs, tests and documents the piping and tanks with the rest of the mechanical package.
Water, wastewater and the Louisiana data center
Water and wastewater connections on a Louisiana data center are sized for the cooling plant’s peak day, not its average, and on hybrid plants the difference is large. LED reports that Amazon will invest up to $400 million in public water infrastructure for its three northwest Louisiana campuses, which are designed to use water cooling only above about 85 degrees Fahrenheit. Owners of smaller sites face the same question at a different scale: whether the utility can deliver peak makeup water, and where blowdown and process drains go.
Paul Industries designs makeup water metering, storage, treatment and backflow protection, blowdown and drain systems, and the controls that switch hybrid plants between dry and wet modes. Treated fill for closed loops and liquid cooling is covered on the ultrapure water systems in Louisiana page, and process and utility piping for industrial sites on the process piping in Louisiana page.
Long-lead equipment and procurement for Louisiana campuses
Long-lead equipment and procurement decide the mechanical schedule on a Louisiana campus more often than field work does. Chillers, large dry coolers, switchgear-fed pump motors, variable frequency drives, large-bore valves and CDUs can take many months from order to delivery, and on a campus that orders them in dozens, the delivery sequence has to match the building sequence.
Paul Industries releases long-lead orders as soon as the basis of design allows, ties each delivery to the building and phase it serves, and arranges factory witness tests so problems are found before equipment ships. Deliveries are scheduled around storm season where possible, and equipment that arrives ahead of need is stored with protection against humidity and dust, with motors heated and shafts rotated. Owners who buy major equipment directly can hand it to Paul Industries for receiving, storage, setting and startup under the same records as the rest of the package.
Prefabrication and phasing for data center building in Louisiana
Prefabrication and phasing are how data center building in Louisiana keeps pace with the IT delivery schedule on campuses where several buildings are under way at once. Pump skids, chiller and heat exchanger modules, pipe rack spools, CDU assemblies and valve stations built off site arrive tested and ready to set, which cuts field hours, improves weld quality and moves work out of the weather.
| Stage | Mechanical work | What it depends on | Louisiana consideration |
|---|---|---|---|
| Design and procurement | Plant design, equipment selection, long-lead orders | IT load, redundancy and phasing agreed | Code edition for the permit date, 2021 or 2024 |
| Prefabrication | Skids, spools, modules built and tested off site | Approved shop drawings | Less field labor competing with industrial work |
| Underground and site | Buried mains, fuel tanks, drains | Grading and civil work | Flood elevation, soil conditions, UST rules under LAC 33:XI |
| Central plant and yard | Chillers, dry coolers, towers, pumps | Structural pads, anchoring design | Wind and flood design for the site |
| Building distribution | Headers, branches, air handlers, CDUs | Building shell dried in | Humidity control and vapor-sealed insulation |
| Testing and startup | Pressure tests, flushing, startup, functional tests | Permanent or temporary power | Energization timing on new generation |
| Tie-in to running plant | Connections to live headers under a method of procedure | Redundancy confirmed on the running plant | Avoid peak-load months for risky tie-ins |
Building a Louisiana data center mechanical yard for hurricanes
A Louisiana data center mechanical yard is designed for hurricane wind and flood because the state’s coast has seen category 4 landfalls in consecutive years. Hurricane Laura came ashore near Cameron on August 27, 2020 with a storm surge of up to 18 feet above ground and passed very near Lake Charles, where a gust of 119 knots was measured, according to the National Hurricane Center. Inland sites face lower surge risk but the same need for anchoring and for equipment that keeps running on generator power.
Paul Industries anchors chillers, dry coolers, towers and piping supports for the wind loads assigned to the site, sets pumps and electrical gear above design flood elevation, protects outdoor coils with coatings where salt or industrial air reaches them, and lays out yards so a damaged unit can be isolated and removed without disturbing its neighbors. Spare parts and makeup water for the days after a storm are part of the design, not an afterthought.
Data center mechanical systems inside a Louisiana building
Data center mechanical systems inside a Louisiana building have to control humidity as carefully as temperature, because the outdoor air the building leaks and ventilates is warm and wet for most of the year. Dedicated outdoor air units dry ventilation air before it reaches the white space, building pressurization keeps unconditioned air out of halls and corridors, and every cold pipe and duct outside the conditioned envelope carries vapor-sealed insulation.
Air side
Computer room air handlers, fan walls and in-row coolers sized for the air-cooled share of the load, with containment that keeps hot and cold air apart. Controls hold supply air within the ASHRAE recommended range while keeping coils above the room dew point where the design allows.
Water side
Primary and secondary pumping, headers, branch piping with isolation valves, chilled water storage for ride-through, and the warm-water loops that feed coolant distribution units. Every branch is valved so a section can be isolated for repair while the rest of the hall keeps cooling.
Support systems
Makeup and domestic water, condensate and drains, leak detection, fuel oil and gas piping, compressed air where the site needs it, and the building automation that monitors all of it. Paul Industries designs and installs these together, so points, alarms and sequences are coordinated from the first drawing.
Quality records Louisiana owners receive from the mechanical package
Quality records Louisiana owners receive from the mechanical package are the evidence that the plant was built and tested as designed, and they matter long after turnover when a leak, a failure or an expansion sends someone back to the files. Paul Industries assembles them as the work proceeds rather than at the end.
- Material test reports and certificates of compliance for pipe, fittings and valves.
- Weld procedure and welder qualification records, weld maps and examination results for welded mains.
- Pressure test reports for every section, with gauge calibration and hold times.
- Flush logs, water analyses and chemical treatment records for each loop.
- Equipment startup reports, controls point checkout sheets and functional test results.
- As-built drawings, valve tags and schedules, operating and maintenance manuals, and training records.
The same records support warranty claims, insurance inspections after a storm and the design of later phases, which is why they are delivered in an organized, searchable form for each building on a campus.
Data center mechanical services after turnover
Data center mechanical services after turnover keep the plant at its design capacity for the life of the campus: preventive maintenance on chillers, pumps and dry coolers, water treatment, refrigerant leak records, vibration and oil analysis, controls tuning, and repairs. Paul Industries maintains the plants it builds under service contracts, and handles chiller repair in Louisiana on plants of any age.
How much does it cost to build a data center’s mechanical systems in Louisiana?
How much it costs to build a data center’s mechanical systems in Louisiana depends on the IT load and redundancy, the split between air and liquid cooling, the heat rejection choice and water arrangements, the number of phases and tie-ins, the generator fuel system, and the wind and flood design of the site. The timing of energization affects the total through schedule, since equipment set early has to be protected until it starts. Published per-megawatt figures cover very different scopes, so they are a poor basis for a budget.
When owners ask how much does it cost to build a data center, the mechanical answer comes from the load profile and site plan. Paul Industries prices from those, first as a budget range drawn from similar campuses and then as a fixed figure when the basis of design is settled, with supply-only, design-build and complete installation options priced side by side.
Who builds data center mechanical systems in Louisiana?
Paul Industries builds data center mechanical systems in Louisiana: central plants, heat rejection yards, chilled water and liquid cooling distribution, fuel and gas piping, makeup water and drains, and controls, delivered as design-build, as a complete installation of the owner’s design, or as supply-only packages of prefabricated skids, spools and equipment. Owners comparing Louisiana data center contractors weigh the same points: whether one contract covers the full mechanical scope, how prefabrication and phasing protect the schedule, and who maintains the plant afterwards.
Related Louisiana pages cover the plant itself on data center cooling in Louisiana, rack-level cooling on data center liquid cooling in Louisiana and testing on data center commissioning in Louisiana. For comparison, see the headquarters state on the data center mechanical contractor in Virginia page and a hurricane-coast neighbor on the data center mechanical contractor in Florida page.
Paul Industries on Louisiana data center campuses
Paul Industries designs, fabricates, supplies, installs, tests and maintains data center mechanical systems for Louisiana owners, from a single enterprise hall to a data center north Louisiana campus built in phases. See the Louisiana page and the Gulf Coast page for the wider industrial picture. Send the load by phase, site plan and schedule, and request a quote.
Standards referenced: Louisiana contractor licensing law (State Licensing Board for Contractors) · 2021 International Mechanical Code (Louisiana) · 2021 International Fuel Gas Code (Louisiana) · 2021 International Energy Conservation Code (Louisiana) · ASME B31.9 · ASME B31.1 · LAC 33:XI · Davis-Bacon Act
Frequently asked questions
Who builds data center mechanical systems in Shreveport, Bossier City and northwest Louisiana?
Paul Industries builds central plants, piping, liquid cooling and fuel systems for data centers in Shreveport, Bossier City, Minden and the rest of the Caddo and Bossier area, the territory SWEPCO serves for the planned hyperscale campuses. Work there is phased, so headers and yards are sized for future buildings, and prefabricated skids and spools keep field hours down during busy construction years.
Does Paul Industries take data center mechanical work in Monroe, Richland Parish and northeast Louisiana?
Yes. Paul Industries takes mechanical work on data centers in Monroe, West Monroe, Delhi and Richland Parish, including central utility plants, pipe racks and building distribution. Energization on new Entergy Louisiana generation shapes the schedule there, so Paul Industries sequences installation and testing to move ahead of permanent power wherever it can.
Which mechanical contractors Baton Rouge data centers and plants use also build in New Orleans and Lafayette?
Paul Industries builds mechanical systems for data centers and industrial plants in Baton Rouge, the river parishes, New Orleans, Jefferson Parish, Lafayette and Acadiana under the same contract terms statewide. Sites near the chemical corridor and the coast get corrosion-resistant outdoor equipment, flood-elevated pumps and storm preparation built into the schedule.
Who handles data center mechanical work in Lake Charles and Calcasieu Parish?
Paul Industries handles data center and industrial mechanical work in Lake Charles, Sulphur and across Calcasieu and Cameron parishes. Hurricane Laura’s 2020 landfall near Cameron, with its surge and the gusts measured in Lake Charles, set the design priorities there: anchoring, elevation above flood levels, coated coils and fuel and water storage for the days after a storm.
Who builds data centers in Louisiana?
The hyperscale programs LED announced in 2024 to 2026 belong to Meta in Richland Parish and to Amazon, with developer STACK Infrastructure, in Caddo and Bossier parishes; enterprise, university and colocation owners build smaller halls in the cities. Paul Industries builds the mechanical systems for data centers of every size in the state, as design-build, complete installation or supply-only, and maintains them after turnover.
Does Louisiana require a contractor license for data center mechanical work?
Yes. The State Licensing Board for Contractors publishes that commercial projects of $50,000 or more must be bid or performed under a commercial license, with electrical, mechanical and plumbing work needing a license on projects above $10,000. Underground storage tank work falls under the law from one dollar. The classification has to match the work, such as Mechanical 6.1 for HVAC and refrigeration.
Do Louisiana data center mechanical contracts carry prevailing wage rates?
Louisiana has no state prevailing wage law; the U.S. Department of Labor notes it was repealed in 1988. Privately funded data center work is priced at contract rates. Federal Davis-Bacon rates apply where the construction is federally funded or assisted, which can include public water, road or power work around a campus, so owners should confirm the funding of each package before bidding.
What is the difference between a mechanical contractor vs HVAC contractor on a data center?
An HVAC contractor typically installs air handling, ductwork and packaged equipment. A data center mechanical contractor carries the whole thermal and fluid scope: central chiller plants, heat rejection yards, large-bore piping and pipe racks, liquid cooling loops, water treatment, fuel and gas piping, controls and testing. Paul Industries delivers that full mechanical scope, including the HVAC work, under one contract.
How does the 2027 code change affect a Louisiana campus already in design?
The Louisiana Uniform Construction Code Commission has set January 1, 2027 for the 2024 ICC codes and the 2023 National Electrical Code. Buildings permitted before then generally stay on the 2021 codes, later ones move to 2024, and a phased campus may have both. Paul Industries tracks the edition for each permit and designs shared plants to satisfy the later edition where practical.
Are data center HVAC contractors enough for a liquid-cooled hall in Louisiana?
Liquid-cooled halls add piping, CDUs, manifolds, fill water treatment, leak detection and pressure testing in the white space, which is pipefitting and process work as much as HVAC. Paul Industries carries both the air side and the liquid loops, so the interface between them is designed and tested under one contract.
Do diesel tanks for data center generators in Louisiana need state oversight?
Buried tanks are regulated by LDEQ’s Underground Storage Tank Division under LAC 33:XI, with registration, leak detection and closure requirements, and work on them falls under the state contractor licensing law from one dollar. Aboveground tanks are governed by fire and building codes for containment and separation. Paul Industries designs and installs both types with their piping and controls.
How does energization on new generation affect a Louisiana mechanical schedule?
When a campus waits on new generation, chillers and pumps may be installed months before permanent power. Paul Industries moves piping, pressure testing, flushing and controls checkout ahead of energization, protects and rotates idle equipment, coordinates warranty start dates, and plans temporary power for tests that cannot wait, so startup follows quickly once permanent power is available.
Can new buildings be added to a running Louisiana campus without shutting down cooling?
Yes, when the first phase is built for it. Paul Industries sizes headers for the final load, installs valved branches for future buildings, and connects each new building under a written method of procedure with redundancy confirmed on the running plant before any valve is opened. Each new branch is pressure tested and flushed on its own before it joins the live system.
Is design-build available for a Louisiana data center mechanical package?
Yes. Paul Industries offers design-build mechanical packages that take the owner’s load, redundancy and site information through design, procurement, prefabrication, installation and commissioning. Complete installation of an owner’s design and supply-only packages of skids, spools and equipment are priced from the same information, so the owner can compare routes.
Does Paul Industries install natural gas and fuel oil piping for data center generators in Louisiana?
Yes. Paul Industries designs and installs natural gas service and distribution piping to the 2021 International Fuel Gas Code as adopted in Louisiana, and diesel storage, transfer pumps, day tanks and fuel oil piping for standby generators, with the pressure tests and records each requires. Storage is sized for the run time the owner specifies after a storm.
What drawings and schedules start a Louisiana data center mechanical estimate?
The IT load and redundancy by phase, the site plan and utility arrangements, the cooling basis of design or equipment list, the share of liquid cooling, generator and fuel requirements, and the target dates for each building. Paul Industries turns that into a budget figure, then a contract price when the design basis is fixed.
Pricing a data center campus phase in Louisiana?
Send the load by phase, redundancy, site plan, utility arrangements and target dates. Call 201-450-8280 or request a quote.
