Paul Industries provides industrial welding services in New Hampshire: ASME code pipe welding, orbital tube welding, structural and repair welding, and welded repairs to boilers and pressure vessels at biologics plants, semiconductor and defense electronics fabs, device and precision manufacturers, food plants, power stations, hospitals and campuses. Every job runs on qualified procedures and qualified welders, is examined to the governing code and is handed over with weld maps, examination reports and material records. Paul Industries, headquartered at 256 Shore Drive, Kilmarnock, Virginia, supplies welded assemblies, takes design-build packages and completes field installation for New Hampshire plants.
Request a quote or call 201-450-8280
Industrial welding services in New Hampshire, by type of work
Industrial welding services in New Hampshire fall into six kinds of work, each with its own code, examination and paperwork: hygienic and high-purity tube welding, process and utility pipe welding, power and steam piping, boiler and pressure vessel repair, structural steel, and repair welding on worn or cracked equipment. The kind of work decides which code applies, and the code decides how the welder and procedure are qualified, how the weld is examined and what the owner keeps on file. The general methods are described on the national industrial welding services page; this page covers how they apply at New Hampshire plants and under New Hampshire rules.
| Type of work | Typical New Hampshire setting | Governing code | What the owner keeps |
|---|---|---|---|
| Hygienic tube welding | Biologics and cell therapy suites in Portsmouth and West Lebanon | ASME BPE, Section IX | Weld log, coupons, borescope video, material certificates |
| High-purity gas and chemical tube welding | Gallium arsenide and electronics fabs in Nashua and Merrimack | SEMI F78 practice, SEMI F81 acceptance, owner specification | Weld log, coupons, visual acceptance, helium leak test |
| Process and utility pipe welding | Device, food and chemical plants statewide | ASME B31.3, Section IX | Weld map, examination reports, pressure test package |
| Steam and power piping | Hospital and campus central plants, biomass power in the North Country | ASME B31.1, Section I for boiler external piping | Weld map, radiography, heat treatment charts |
| Boiler and pressure vessel repair | Any plant with a vessel under RSA 157-A | National Board Inspection Code Part 3, Lab 1200 | Repair report accepted by the inspector |
| Fuel gas and plumbing system pipe | Burner trains, gas mains, large water services | NFPA 54, plumbing code, RSA 153:36 V | Welder qualification, pressure test, inspection |
| Structural steel and platforms | Pipe racks, mezzanines, equipment supports | AWS D1.1, 2024 IBC Chapter 17 | Welder qualifications, special inspection reports |
Where New Hampshire welding work concentrates
New Hampshire welding work for industry concentrates in five areas: the Nashua and Merrimack corridor, the Seacoast, Manchester and its mill buildings, the Upper Valley around Lebanon and Hanover, and the North Country around Berlin. Each area brings a different mix of metals, codes and site conditions.
Nashua, Merrimack and Hudson: defense electronics and precision plants
Nashua is home to BAE Systems’ Microelectronics Center, a six-inch gallium arsenide foundry that produces microelectronics for defense and aerospace, and BAE reports about 3,700 employees in the city across two campuses. These employers are named as a picture of the market, nothing more. Fabs and electronics plants in this corridor need orbital welds on electropolished stainless gas and chemical tube, purge control good enough to keep the weld root free of oxide discoloration, and repair and structural welding on tool supports and process cooling systems that has to happen beside running equipment.
The Seacoast: biologics and the shipyard-linked industrial base
The Seacoast combines biologics production at Portsmouth and the Pease Tradeport with an industrial base tied to Portsmouth Naval Shipyard, which sits across the Piscataqua River in Kittery, Maine; reporting in 2025 put the number of New Hampshire residents working at the yard at roughly 2,900 to 3,000. For welding, that mix means hygienic 316L tube work in validated suites on one side and heavier carbon steel and alloy work for marine, defense and manufacturing plants in Portsmouth, Dover and Rochester on the other.
Manchester and the mill buildings
Manchester’s Millyard and the converted mills of Nashua, Dover and Somersworth house device makers, technology firms and biofabrication tenants. Welding inside those buildings means hot work next to old timber, oil-soaked floors and concealed voids, so fire prevention planning matters as much as the weld procedure, and new steel tied into existing brick and iron needs its connection details checked against the structure before it goes up.
The Upper Valley and the North Country
Novo Nordisk’s 215,000 square foot biologics plant in West Lebanon and the hospital and college campuses around Lebanon and Hanover need hygienic tube welding, steam and condensate piping, and chilled water work. Farther north, Burgess BioPower runs a 75 megawatt biomass plant in Berlin that came out of Chapter 11 reorganization in April 2026 and sells power into the ISO New England markets. Biomass and steam plants of that size generate B31.1 piping repairs, boiler tube work and wear-resistant overlay on fuel handling equipment during planned outages.
Welding certification, New Hampshire statute and the codes
Welding certification in New Hampshire comes from the codes that govern the work rather than from a single state welding card. For pressure piping, boilers and vessels, ASME Section IX sets the qualification: a written welding procedure specification supported by a procedure qualification record, and a welder performance qualification for each welder and process, kept current by continuity records. Structural steel follows AWS D1.1, and high-purity tube follows the owner’s specification, often built on SEMI F78.
New Hampshire’s mechanical licensing statute addresses welders directly in one place. On plumbing and fuel gas piping, RSA 153:36 V provides that a welder holding current ASME welding certification may join pipe and fittings to the system, using the appropriate qualified process, under the direct supervision of a fuel gas fitter or master plumber who holds a board license. Paul Industries plans gas main and large water service welding to that provision and to NFPA 54 or the plumbing code, and records the welder’s qualification with the pressure test.
Orbital welding, New Hampshire biologics and semiconductor lines
Orbital welding in New Hampshire biologics and semiconductor plants joins thin-wall stainless tube with an automated gas tungsten arc head that turns around the joint under a programmed schedule, giving the same weld every time the schedule, material and purge match. Hygienic systems in Portsmouth and West Lebanon follow ASME BPE, which sets weld bead width, penetration, discoloration and misalignment limits and calls for examination of the inside surface, typically by borescope. Semiconductor gas and chemical systems in Nashua follow the owner’s specification, commonly drawn from SEMI F78 for the welding practice and SEMI F81 for visual acceptance.
Paul Industries controls the variables that decide whether an orbital weld passes: tube and fitting heat numbers matched to certificates, square and burr-free end preparation, oxygen content of the purge measured before the arc strikes, a sample coupon at the start of each shift and after any change of material, head or power supply, and a weld log that ties every joint to its schedule, operator and inspection result. Welds that fail are cut out and replaced, and the log records the replacement so the validation group sees one clean history. The finished lines feed the systems on the ultrapure water systems in New Hampshire and process piping in New Hampshire pages.
Welded repairs to boilers and pressure vessels under RSA 157-A
Welded repairs to boilers and pressure vessels in New Hampshire are governed by the Department of Labor’s Lab 1200 rules, readopted in September 2026, which require every repair and alteration to follow the National Board Inspection Code. RSA 157-A requires the state’s rules to be consistent with the ASME Boiler and Pressure Vessel Code and the National Board Inspection Code, and every boiler and pressure vessel inspector must hold an active National Board commission.
Before an arc is struck on a pressure part, the repair method, the extent of examination and any pressure test are agreed with the inspector, and the repair itself is carried out under the National Board R program. Typical repairs are tube replacements, nozzle and manway repairs, weld buildup of thinned areas and replacement of a cracked section. Each repair ends with a repair report the inspector accepts, and that report goes into the vessel’s file for the next certificate inspection. Where a vessel carries no ASME symbol, its maximum allowable pressure is computed under the National Board Inspection Code, so the repair calculation follows the same basis. Vessel and boiler work in more depth sits on the pressure vessel fabrication in New Hampshire and boiler repair in New Hampshire pages.
Hot work under New Hampshire’s 2024 fire code
Hot work at New Hampshire plants falls under the State Fire Code, which RSA 153:1 defines as NFPA 1, the Fire Code, and NFPA 101, the Life Safety Code, both in their 2024 editions, together with the standards those codes reference, including NFPA 51B for welding, cutting and other hot work. The State Fire Marshal and the municipal fire chief apply the code, and many plants and insurers add their own permit systems on top of it.
Two fire watch durations come up on every New Hampshire job. Federal OSHA, in 29 CFR 1910.252, requires a fire watch for at least a half hour after welding or cutting ends. NFPA 51B raised its own minimum to one hour in the 2019 edition, and plants following the fire code plan to the longer figure. Paul Industries writes the permit conditions into the job plan before the first arc: combustibles moved 35 feet or shielded, floor and wall openings covered, sprinklers in service, gas detection where the area could hold flammable vapor, and a trained fire watch with extinguishing equipment through the watch period.
| Control | Source | How it is applied on site |
|---|---|---|
| Written hot work permit | NFPA 51B through NFPA 1; plant procedure | Issued by the plant’s permit authorizing individual for each location and shift |
| Clearance of combustibles | NFPA 51B; 29 CFR 1910.252 | Material moved 35 feet away or covered with listed welding blankets and curtains |
| Fire watch during work | NFPA 51B; 29 CFR 1910.252 | Trained watcher with extinguisher, on both sides of walls where sparks can pass |
| Fire watch after work | One hour under NFPA 51B 2019; at least a half hour under OSHA | Watch held for the longer period; area checked before the permit closes |
| Atmosphere testing | NFPA 51B; plant procedure | Gas testing near solvent, fuel or process vapor sources before and during work |
| Fire protection in service | NFPA 1; plant procedure | Sprinklers and alarms kept active; any impairment handled under the impairment procedure |
Structural welding, New Hampshire building code inspections
Structural welding at New Hampshire plants falls under the State Building Code, which moved to the 2024 International Building Code on July 1, 2026, with new permit applications on the 2024 edition from January 1, 2027. Chapter 17 of the IBC calls for special inspection of structural steel, including welding, on work that needs a permit, with the program laid out in the statement of special inspections prepared for the project. Welding itself follows AWS D1.1 for structural steel and AWS D1.3 for sheet steel.
At a plant, structural welding usually means pipe racks, platforms and stairs, equipment supports and dunnage, mezzanines, crane runway repairs and reinforcement of existing framing for new loads. Paul Industries fabricates steel off site where the connection design allows, welds in the field where it has to, and coordinates the special inspector’s visits with the welding sequence so inspection never holds up the next lift. Steel fabrication is covered on the structural steel fabrication page.
Industrial vs commercial welding: what changes inside a plant?
Industrial vs commercial welding differs by the setting and by the code. Commercial welding usually means building work such as handrails, stairs, storefront steel, light framing and repairs in offices, shops and retail buildings, done to AWS D1.1 or the architect’s specification. Industrial welding happens inside operating plants, on pressure piping, boilers, vessels, process equipment and heavy structure, under ASME, National Board and owner specifications, with procedure qualification, examination and records that a commercial job seldom needs.
The plant setting changes the work as much as the code does. Hot work permits, lockout of the systems being welded, gas testing, cleanroom gowning, outage windows and the plant’s own quality rules all shape the job. For a New Hampshire welding project that touches a running process, those conditions are planned into the schedule and the price from the start.
Welding inside cleanrooms, fabs and GMP suites
Welding inside a cleanroom, fab or GMP suite is planned so that the room stays within its classification and the product stays protected. Paul Industries prefabricates as much tube and pipe as the routing allows, so the in-room work is limited to the closing welds. Inside the room, the work follows the plant’s gowning, material entry and cleaning procedures; orbital weld heads replace manual torches where the joint allows; fume and particles are captured at the source; and every opening in the system is capped between shifts. In a GMP suite, the work runs under the plant’s change control, and the weld records feed directly into the installation qualification for the system, described on the validation and commissioning in New Hampshire page.
Weld examination and the records a New Hampshire plant keeps
Weld examination at New Hampshire plants is chosen by code and service: visual examination on every weld, with radiography, ultrasonic, liquid penetrant, magnetic particle, borescope or leak testing added as the code and the owner’s specification require. ASME B31.3, for example, calls for random radiography of 5 percent of circumferential butt welds in Normal fluid service and full examination in more severe service, while ASME BPE relies on visual and borescope examination of hygienic welds.
| Method | What it finds | Where it is used |
|---|---|---|
| Visual examination | Surface cracks, undercut, porosity, profile, discoloration | Every weld under every code |
| Borescope of the weld root | Root penetration, concavity, discoloration inside hygienic tube | BPE systems in biologics and cell therapy suites |
| Radiography | Internal porosity, slag, lack of fusion, incomplete penetration | B31.3 and B31.1 butt welds, vessel repairs |
| Ultrasonic or phased array | Volumetric flaws in thick sections, without radiation exclusion zones | Heavy wall steam piping, vessel nozzles, occupied buildings |
| Liquid penetrant or magnetic particle | Surface-breaking cracks | Fillet welds, repair excavations, structural connections |
| Helium leak testing | Leak paths too small for a pressure test to show | High-purity gas systems in fabs |
At turnover, a New Hampshire plant receives the weld map or weld log, the procedure specifications and procedure qualification records, welder qualifications with continuity, material certificates traced to heat numbers, examination reports, heat treatment charts where applicable, and the pressure or leak test record. Boiler and vessel repairs add the repair report accepted by the inspector.
How is welding fitted into a New Hampshire plant shutdown?
Welding for a New Hampshire plant shutdown is fitted into the outage by moving every weld that can be made early out of the outage window. Biologics plants schedule their shutdowns between production campaigns, fabs plan around tool qualification windows, food plants use seasonal low points, and hospital and campus plants take steam outages in the shoulder months between heating and cooling seasons. Each of those windows is short, so the scope is frozen early and the welding is staged.
Paul Industries walks the scope before the outage, measures and photographs tie-in points, confirms materials against the plant’s records, and prefabricates spools, nozzles and replacement sections with their examination complete. Weld procedures, welder qualifications, hot work permits and inspection holds are settled in advance, and a joint-by-joint schedule shows which welds happen on which shift. During the outage, the field work is limited to cutting out, fitting and closing welds, examination of those welds and the pressure test. After restart, the documentation is assembled into one package for the plant’s maintenance and quality files, and any open items are listed with their closure dates.
What do industrial welding services in New Hampshire cost?
Industrial welding services in New Hampshire are priced on joint count, material and wall thickness, process, position and access, examination level, documentation and the conditions the plant sets, rather than on hours alone. An orbital weld on 316L tube inside a gowned suite, with a coupon, borescope video and a log entry, costs far more per joint than a manual weld on carbon steel in an open plant, and heavy wall alloy steam pipe adds preheat and post-weld heat treatment.
State-related costs are modest but real: the Department of Labor charges $100 per hour for inspections its own employees perform under RSA 157-A, and fire watch time, gas testing and special inspection visits are line items on many jobs. Paul Industries gives a budget range from comparable work early and a firm price once drawings, joint counts, examination requirements and work windows are fixed.
Who provides industrial welding services in New Hampshire?
Paul Industries provides industrial welding services in New Hampshire, from a single repair to a full plant expansion, with welding, examination and documentation under one contract. Headquartered at 256 Shore Drive in Kilmarnock, Virginia, and formerly based in northern New Jersey, then Pennsylvania, Paul Industries welds at plants throughout New Hampshire, across all 50 states and at industrial sites abroad. Companies running sites in more than one state see the same method on the industrial welding services in Virginia page for the headquarters state, the industrial welding services in Massachusetts and industrial welding services in Connecticut pages, and regionally on the New England page.
Industrial welding from Paul Industries throughout New Hampshire
Paul Industries welds, fabricates, examines, repairs and documents pipe, tube, vessels, boilers and structural steel for New Hampshire biologics plants, fabs, device and precision manufacturers, food plants, power stations, hospitals and campuses, from Portsmouth, Dover and Rochester to Nashua, Manchester, Concord, Keene, Lebanon and Berlin. The New Hampshire page brings the state’s industries and code requirements together in one place. Send drawings or photos, the material and code, and your work windows, call 201-450-8280 or request a quote.
Standards referenced: ASME Boiler and Pressure Vessel Code Section IX · ASME B31.1 Power Piping · ASME B31.3 Process Piping · ASME BPE Bioprocessing Equipment · National Board Inspection Code Part 2 and Part 3 · AWS D1.1 Structural Welding Code: Steel · SEMI F78 and SEMI F81 · NFPA 1 Fire Code, 2024 edition · NFPA 51B Fire Prevention During Welding, Cutting and Other Hot Work · NFPA 54 National Fuel Gas Code · OSHA 29 CFR 1910.252 · RSA 153:36 V (New Hampshire welder provision for plumbing and fuel gas piping) · RSA 157-A and Lab 1200 (New Hampshire boiler and pressure vessel repairs) · RSA 155-A (2024 International Building Code, Chapter 17)
Frequently asked questions
Who provides orbital tube welding for biologics suites in Portsmouth and at Pease?
Paul Industries provides orbital tube welding for biologics and cell therapy suites in Portsmouth, at the Pease Tradeport and across the Seacoast. Welds follow ASME BPE, with matched heat numbers, measured purge oxygen, start-of-shift coupons, borescope examination and a weld log that ties each joint to its schedule and inspection result, ready for the plant’s installation qualification.
Does Paul Industries weld high-purity gas lines for fabs in Nashua and Merrimack?
Yes. Paul Industries welds electropolished stainless gas and chemical tube for semiconductor and electronics plants in Nashua, Merrimack and Hudson to the owner’s specification, commonly built on SEMI F78 and SEMI F81. Each system is purged, coupon-checked and helium leak tested, and work beside running tools is sequenced behind isolation valves under the fab’s permit rules.
Who handles plant welding in Manchester, Concord and the Merrimack Valley?
Paul Industries takes pipe, structural and repair welding at plants, hospitals and campuses in Manchester, Concord, Bow and Hooksett. Work in converted mill buildings is planned around timber floors, concealed voids and old masonry, with fire prevention measures and connection details settled before any hot work begins and records handed over at the end.
Who handles biomass plant and steam line welding around Berlin and Gorham?
Paul Industries takes B31.1 steam piping, boiler tube and pressure part repairs, and wear-resistant overlay on fuel handling equipment at biomass, power and industrial plants in Berlin, Gorham and the North Country. Repairs to boilers follow the National Board Inspection Code with the inspector consulted, and outage scopes are prefabricated so the welding fits the plant’s shutdown window.
Which welding work does Paul Industries do at Keene and Monadnock region plants?
Paul Industries provides process and utility pipe welding, stainless repairs, structural steel for racks and platforms, and equipment repair welding at manufacturing and food plants in Keene, Peterborough, Jaffrey and the Monadnock region. Each job is quoted with its procedure, examination plan and records defined, so the plant knows what it receives at turnover.
What separates welding companies in New Hampshire on code work?
The difference shows in the paperwork: qualified procedure specifications with supporting qualification records, welder qualifications with continuity logs, examination reports, material traceability and inspector-accepted repair reports for vessels. Paul Industries supplies that full record set on every New Hampshire job, along with design, fabrication and field installation under one contract and one schedule.
What should a welding company, NH boiler inspector and plant agree before a boiler repair?
The plant should confirm the repair method, extent of examination and any pressure test with the boiler inspector before work starts, because the Lab 1200 rules require repairs to follow the National Board Inspection Code. Paul Industries prepares the repair plan, weld procedure and material details for that review and closes the job with a repair report the inspector accepts.
Is there a New Hampshire rule for welding on fuel gas piping?
Yes. RSA 153:36 V provides that a welder holding current ASME welding certification may join pipe and fittings on plumbing and fuel gas systems under the direct supervision of a fuel gas fitter or master plumber who holds a board license. The welds also meet NFPA 54 for gas piping, and the line is pressure tested before gas is introduced.
How long must a fire watch last after welding at a New Hampshire plant?
NFPA 51B, part of the State Fire Code through NFPA 1, has required at least one hour of fire watch after hot work since its 2019 edition, while federal OSHA’s 29 CFR 1910.252 sets at least a half hour. Plants under the fire code plan to the hour, and many insurers and plant procedures add further monitoring.
Is welding considered industrial when it is done on a building's heating system?
Welding on a large heating plant is industrial in method even inside a commercial building: steam and hot water piping under pressure follows ASME B31.1 or B31.9, and boiler repairs follow the National Board Inspection Code. The classification matters less than the code, so Paul Industries qualifies, examines and documents the weld to whichever code governs the system.
Which industrial vs commercial welding jobs does a hospital in Lebanon or Hanover need?
A hospital campus needs both. Industrial welding covers its central plant: steam, condensate, chilled water, medical gas tie-ins and boiler repairs under ASME and NBIC rules. Commercial welding covers stairs, rails and light steel in clinical buildings. Paul Industries handles both under one contract, planning hot work around patient care areas and infection control rules.
How are welds protected from contamination in a New Hampshire cleanroom?
Tube and pipe are prefabricated off site and capped, so in-room work is limited to closing welds. Inside the room, work follows the plant’s gowning and material entry rules, orbital heads replace manual torches where possible, fume is captured at the source, and every open end is capped between shifts. Records go straight into the system’s qualification file.
What does structural welding special inspection involve under the 2024 New Hampshire code?
Under Chapter 17 of the 2024 International Building Code, which New Hampshire adopted from July 1, 2026, structural steel welding on permitted work is examined by a special inspector according to the project’s statement of special inspections. The inspector checks welder qualifications, procedures, fit-up and finished welds. Paul Industries schedules the welding sequence around those inspection points.
How long does an ASME welder qualification stay current on New Hampshire jobs?
Under ASME Section IX, a welder’s performance qualification stays current as long as the welder uses the process at least once every six months, which is recorded in a continuity log. Paul Industries maintains those logs and includes them in the turnover package, so the owner and the inspector can trace every weld to a current qualification.
Can stainless steel be repaired by welding without losing its corrosion resistance?
Stainless steel keeps its corrosion resistance after a weld repair when the filler metal, heat input and shielding are controlled and the heat tint is removed. Paul Industries uses low-carbon or matching filler, keeps interpass temperatures in check, purges the root and then cleans and passivates the area so the surface film reforms across the repair.
Does Paul Industries supply welded spools and assemblies without field installation?
Yes. Paul Industries supplies welded spools, tube assemblies, skids, frames and supports for New Hampshire plants on a supply-only basis, examined and documented to the specified code, as well as design-build packages and complete field installation. Many plants combine the routes, taking prefabricated spools for a shutdown and field welding for tie-ins.
What information turns a New Hampshire welding budget into a fixed price?
Send drawings or photos, material grades and sizes, the governing code and examination requirements, the joint count or scope, site rules for hot work and cleanrooms, and the available work windows. Paul Industries returns a budget range from comparable work first and a firm price once the scope is fixed.
Planning welding work at a New Hampshire plant?
Send drawings or photos, the material and governing code, the examination requirements and your work windows. Call 201-450-8280 or request a quote.
