Paul Industries is a data center mechanical contractor in Wisconsin that designs, prefabricates, installs, tests and maintains the mechanical systems of data halls and campuses: chiller plants, dry coolers and towers, chilled and condenser water piping, liquid cooling distribution, air handling, refrigerant piping, makeup water and generator fuel systems. Wisconsin data center construction has reached hyperscale size, with one campus operating in Mount Pleasant and its second facility under way. Paul Industries, headquartered at 256 Shore Drive in Kilmarnock, Virginia, delivers the mechanical scope for Wisconsin halls of every size under the state’s own code chapters, through its winters and on schedules set by utility power.
Request a quote or call 201-450-8280
What falls to a data center mechanical contractor in Wisconsin?
A data center mechanical contractor in Wisconsin carries every system that moves heat, water, air and fuel on the site: the heat rejection plant and its yard piping, the chilled water or warm-water loops through the building, CDUs and rack manifolds for liquid cooling, air handlers and fan walls, refrigerant piping for chillers and direct expansion units, domestic and makeup water, and the generator fuel and exhaust systems. On a Wisconsin job that scope also includes the state filings tied to it and the records the state requires at turnover.
| System | What Paul Industries delivers | Wisconsin rule that applies |
|---|---|---|
| Chiller plant and refrigerant piping | Chillers set, piped, evacuated, charged and started | SPS 345 registration and state inspection; ASHRAE 15 as adopted |
| Chilled water, condenser water and warm-water loops | Headers, risers, pumps, exchangers, valves, insulation | 2021 IMC hydronic chapter; SPS 364.0313 balancing |
| Liquid cooling distribution | CDUs, secondary loops, rack manifolds, leak detection | 2021 IMC for water loops; SPS 345 checked for refrigerant-based systems |
| Dry coolers, towers and yard piping | Equipment setting, glycol loops, heat tracing, basin protection | County design temperatures from SPS Table 363.0302 |
| Boilers, expansion tanks and other pressure vessels | Installation and connection of heating plant and vessels | SPS 341; welded repairs and alterations to the National Board Inspection Code |
| Makeup water, wells and metering | Makeup piping, meters, backflow protection, treatment skids | Wis. Stat. 281.34 and 281.346 where the site draws its own water |
| Generator fuel and exhaust | Fuel piping, day tank connections, exhaust and supports | DNR air permit for fleets beyond the NR 406 exemption |
The national data center mechanical contractors page sets out how the mechanical package is divided and delivered on any campus. The rest of this page covers what is specific to Wisconsin.
Wisconsin data center construction: where the halls are going up
Wisconsin data center construction is led by three large campuses, each named here only as a market fact. In June 2026 Microsoft reported its first Mount Pleasant facility complete and fully operational after nearly 10,000 construction workers contributed over two years, and that construction of the second facility next to it, with foundation installation, steel erection and underground utilities under way, is scheduled for completion in 2028. Meta broke ground on a data center in Beaver Dam in November 2025, an investment it put above $1 billion with more than 1,000 skilled trade workers at peak. The Lighthouse campus in Port Washington, Ozaukee County, was still developing in October 2026.
What a Wisconsin hyperscale data center asks of the mechanical trades
The scale of the Mount Pleasant work shows what a Wisconsin hyperscale data center demands from the mechanical trades. Microsoft has said that more than 3,000 construction workers were on site at daily peak, plumbers and pipefitters among them, and that it bought directly from 29 businesses in 11 Wisconsin counties, including steel fabricators in Outagamie and Marathon counties. Smaller data center projects in Wisconsin, from enterprise halls in Milwaukee to research computing in Madison and colocation in the Fox Valley, compete for the same trades and the same equipment, which is why prefabrication and early procurement matter as much in a 2 megawatt room as on a campus. For owners watching every data center in Wisconsin being built, the practical question is when its mechanical plant needs to carry load, since that date sets every procurement and installation milestone behind it.
The Wisconsin code path for the mechanical scope
The Wisconsin code path for the mechanical scope starts with the Wisconsin Commercial Building Code, chapters SPS 361 to 366, which incorporates the 2021 International Building Code, International Mechanical Code, International Energy Conservation Code, International Fuel Gas Code and International Existing Building Code from September 1, 2025, with state amendments. The Department of Safety and Professional Services reviews plans through its eSLA system and must decide a complete application within 15 business days, and SPS 361.40 puts any building of at least 50,000 cubic feet under the supervision of an architect or engineer registered in Wisconsin.
Three state chapters sit beside the building code and matter more to the mechanical contractor than to anyone else on the job. SPS 364.1101 removes chapter 11 of the International Mechanical Code and sends all mechanical refrigerating systems in public buildings and places of employment to SPS 345, the state’s mechanical refrigeration chapter, which adopts ASHRAE 15 and requires registration and inspection of larger systems. SPS 341 governs boilers, pressure vessels and power piping, and requires welded repairs and alterations to follow the National Board Inspection Code. SPS 364.0313 requires every HVAC system to be balanced on installation, with pump speed or impeller trim used before valves are throttled, and an operating and maintenance manual handed to the owner.
Smaller buildings follow a slightly different route: municipalities that have taken on plan review handle buildings under 50,000 cubic feet, and some occupancies under 25,000 cubic feet are exempt from state plan review altogether. A data hall added inside an existing building falls under the International Existing Building Code as adopted. Paul Industries confirms the review route for each project during design, since it decides who reviews the mechanical drawings and when.
Refrigerant piping and chiller setting under SPS 345
Refrigerant piping and chiller setting on a Wisconsin data center follow SPS 345, which applies to new systems and to replacement parts, alterations and repairs on existing ones. For a system charged with an A1 or B1 refrigerant at a 50-ton rating or larger, the department must have the registration 20 business days ahead of first operation, and its inspection follows within 45 business days of completion, and the chapter sets inspection requirements for refrigerant steel piping with welded joints. Refrigerants in the A2, B2, A3 and B3 safety groups trigger registration at only 10 tons, a threshold worth checking as new chillers move to lower-GWP refrigerants.
Paul Industries installs refrigerant piping to ASME B31.5 practice, pressure tests, evacuates and charges each system, and assembles the registration and inspection records with the startup report. The commissioning and inspection sequence is laid out on data center commissioning in Wisconsin, and the same chapter’s rules for repairs are covered on chiller repair in Wisconsin.
Prefabrication and building through a Wisconsin winter
Prefabrication is how a Wisconsin data center keeps its mechanical schedule through winter, because pipe spools, pump skids, pipe rack modules and manifold assemblies built in heated fabrication bays arrive ready to set while field welding and testing in subzero weather are kept to the minimum. State design temperatures run from 10 below zero along Lake Michigan to 25 below in the north, and the construction season sees colder days than that.
| Activity | Winter problem | How the work is planned |
|---|---|---|
| Pipe fabrication | Field welding slows and preheat needs rise in the cold | Spools and modules welded off site; field joints minimized and planned for heated enclosures |
| Hydrostatic testing | Test water freezes in unheated sections | Testing inside temporary enclosures, immediate drain-down, glycol test media where allowed |
| Equipment setting | Cranes and rigging limited by wind, snow and ground conditions | Lifts sequenced with weather windows; equipment stored dry and heated |
| Insulation and heat tracing | Adhesives and jackets need minimum temperatures | Exterior insulation scheduled for heated periods or done on prefabricated assemblies |
| Flushing and filling | Loops filled with water before permanent heat risk freezing | Loops filled once the building is heated, or filled with glycol from the start |
| Rooftop dry coolers and air-cooled chillers | Snow loads, drifting and icy access | Layout with snow clearance, raised dunnage and safe winter access paths |
Paul Industries designs the module breaks with the erection sequence, ships assemblies with test records, and plans field tie-ins for days the weather allows. The piping practices behind the modules are covered on process piping in Wisconsin and the field welding on industrial welding services in Wisconsin.
Data center mechanical equipment that suits Wisconsin’s climate
Data center mechanical equipment chosen for Wisconsin’s climate favors economizing and closed loops: dry coolers and fluid coolers on warm-water loops, air-cooled chillers with free cooling coils, plate heat exchangers for waterside economizers, and hybrid adiabatic coolers for the southeast’s humid peaks. Each needs cold-climate options, such as low ambient controls, fan speed control, coil protection and heaters for enclosures, and each affects the mechanical layout on the roof or in the yard.
The heat rejection choice is made with the owner and the engineer of record, and it drives most of the mechanical contractor’s work: glycol loops and the plate exchangers that separate them from indoor water, the yard piping and supports, the heat tracing, and the rooftop structure for equipment that may never have been planned for. The cooling plant comparison is set out on data center cooling in Wisconsin, and the rack-side loops on data center liquid cooling in Wisconsin.
Water, wells and fuel: the site utilities in a Wisconsin mechanical package
Water and fuel systems are part of a Wisconsin mechanical package and carry their own state rules. A site that draws its own water through wells with combined capacity over 100,000 gallons per day needs DNR high capacity well approval, and any system able to withdraw that much on average over a 30-day period is registered with the DNR and reports its monthly withdrawal volumes each year. The mechanical contractor installs the makeup piping, meters and treatment equipment those reports depend on, so metering points are placed where they capture every use.
Generator fuel systems connect to an engine fleet that, on almost every data center, exceeds the 3,000 kilowatt combined output under which Wisconsin exempts restricted use engines from an air construction permit. The DNR permit for the fleet sets operating and testing conditions, and the fuel piping, day tanks and exhaust systems are installed to match the permitted equipment. Paul Industries routes fuel and exhaust alongside the electrical and structural work on one schedule.
Utility power and the mechanical sequence
Utility power usually sets the order in which a Wisconsin data center’s mechanical systems are built, because cooling capacity is only useful when there is load to cool. We Energies, Wisconsin Public Service, Alliant Energy’s Wisconsin Power and Light and Madison Gas and Electric each bring new service and substation capacity in stages, and the mechanical plant is built in matching blocks: a chiller or dry cooler bank, its pumps and the loops for the halls that block serves.
| Stage | Mechanical work | Wisconsin step at this stage |
|---|---|---|
| Site and underground | Underground water, fire and drainage piping, yard piping sleeves, well connections | High capacity well approval before drilling where the site draws its own water |
| Building shell | Pipe racks, supports, risers, rooftop dunnage for dry coolers | Plan approval in hand; supervision by the engineer of record |
| First block of cooling | Chillers or dry coolers, pumps, headers, valved stubs for future blocks | SPS 345 registration filed 20 business days ahead of chiller startup |
| First halls | CDUs, manifolds, air handlers, leak detection, balancing | SPS 364.0313 balancing report and O&M manual |
| Integrated test of the block | Mechanical tests under load banks and generator transfer | Generator hours within the DNR permit conditions |
| Next block | New equipment tied into valved stubs without shutting down the live block | Registration and inspection for each new chiller |
Building in blocks means each block is installed, tested and commissioned while the next is under construction, and the piping is designed with valved connections so a future block ties in without shutting down the one before. At Wisconsin’s 2024 average industrial electricity price of 8.54 cents per kilowatt-hour, the efficiency of each block’s plant also carries real operating cost, so the mechanical contractor’s attention to pump selection, balancing and controls pays back through the life of the campus.
Working inside operating halls in Milwaukee, Madison and Green Bay
Working inside operating halls is a large share of the mechanical work in Wisconsin cities. A data center mechanical contractor in Milwaukee often works in enterprise and colocation halls inside existing buildings, where new risers, chilled water taps and liquid cooling headers go in around live equipment. Data center construction in Madison frequently means research computing rooms inside university and healthcare buildings, and data center construction in Green Bay and the Fox Valley often serves manufacturers, insurers and health systems expanding halls they already run.
The method is the same in each: a survey of capacity and redundancy, hot work and isolation procedures agreed with the operator, valved tie-ins installed in planned windows, prefabricated assemblies to shorten work inside the hall, and testing of each new section before it joins the live plant. Paul Industries keeps the existing systems carrying load until the new equipment has proven itself.
Keeping the mechanical plant running after the hall opens
Keeping a Wisconsin data center’s mechanical plant running after the hall opens is a year-round program shaped by the state’s seasons and its refrigeration chapter. Registered chillers that use A1 or B1 refrigerants come up for state inspection at least every 36 months, and the permit to operate has to stay current, so the inspection date belongs on the same calendar as the manufacturer’s maintenance. Each autumn the outdoor side is prepared for winter: glycol concentration and freeze point checked, heat trace circuits tested, dry cooler coils cleaned and basin heaters proven before the first hard freeze.
Spring brings the opposite checks, with adiabatic sprays and towers returned to service, water treatment restarted and economizer changeover setpoints confirmed before the first warm spell. Through the year, strainers, water chemistry, pump vibration and CDU filters are tracked so problems show up as trends rather than alarms. Paul Industries provides that program under service contracts, with the same records format used at turnover, so the owner’s file stays complete from the first day of operation.
Comparing mechanical contractors: Wisconsin data center questions to ask
Comparing mechanical contractors for a Wisconsin data center comes down to evidence on five points: how the bidder will meet the state’s refrigeration registration and balancing rules, how much of the piping it will prefabricate and where, how it will test and fill loops in winter, how it will tie new blocks into live ones, and what records the owner receives at the end. A clear answer to each, in writing, tells an owner more than a unit price does.
Paul Industries answers those questions in the proposal itself. The schedule shows the SPS 345 filing dates against chiller startup, the fabrication plan lists which assemblies are built off site, the winter plan names the enclosures, temporary heat and test media, the tie-in procedures show how live systems stay protected, and the turnover list includes the balancing report, operating and maintenance manual, pressure test logs and registration files. Owners who want a single contract for the mechanical scope, from design through service after turnover, get it under one schedule and one set of records.
What drives the price of the mechanical package on a Wisconsin data center?
The price of the mechanical package on a Wisconsin data center is driven by the IT load and density, the heat rejection method, redundancy, the amount of liquid cooling, the length and size of piping, how much can be prefabricated, the season of installation, and whether the work is a new campus or inside an operating hall. Winter work adds temporary heat, enclosures and glycol, and cold-climate equipment options add cost to dry coolers and chillers.
Labor and equipment availability in a market with several large campuses under construction also shapes the price and the schedule, which is why owners lock procurement for long-lead chillers, CDUs and dry coolers early. Paul Industries prices the mechanical package with a budget range from comparable scope at concept stage, then a firm price on the design documents, with equipment, prefabrication, field labor and winter measures shown separately.
Who installs the mechanical scope on Wisconsin data center projects?
Paul Industries installs the mechanical scope on Wisconsin data center projects, designing, supplying, prefabricating, installing, testing and maintaining chiller plants, heat rejection, piping, liquid cooling distribution, air handling and site water and fuel systems. Paul Industries takes this work in Mount Pleasant, Racine and Kenosha, in Milwaukee and Waukesha, in Port Washington and Ozaukee County, in Madison and Dane County, in Beaver Dam and Dodge County, in Green Bay, Appleton and Oshkosh, in Sheboygan and Manitowoc, and in Wausau, Eau Claire and La Crosse, with the same scope offered in every other state. Among mechanical contractors Wisconsin owners consider, Paul Industries offers each route: supply of equipment and prefabricated assemblies, design-build, or complete installation of an engineered design.
Owners comparing the mechanical approach in other markets can read data center mechanical contractor in New York and the headquarters state page, data center mechanical contractor in Virginia, while the Midwest page sets Wisconsin beside its neighboring states.
Data center mechanical systems from Paul Industries in Wisconsin
Paul Industries, headquartered in Kilmarnock, Virginia, and before that based first in northern New Jersey and then in Pennsylvania, is an East Coast contractor that builds data center mechanical systems for Wisconsin campuses and halls and for projects in every state. Each Wisconsin package is built to the state’s 2021 codes and its refrigeration, pressure vessel and balancing chapters, prefabricated for winter, sequenced with utility power and turned over with complete records. To start, share the concept or design set, the IT load and rack density, the site, and when the utility will energize each phase; for everything else Paul Industries does in the state, see the Wisconsin page. Call 201-450-8280 or request a quote.
Standards referenced: Wisconsin Commercial Building Code, chs. SPS 361 to 366 · 2021 International Mechanical Code and International Building Code (SPS 361.05) · ch. SPS 341 Boilers and Pressure Vessels and the National Board Inspection Code · ch. SPS 345 Mechanical Refrigeration and ANSI/ASHRAE 15 · SPS 364.0313 balancing and O&M manuals · ch. NR 406 air permit exemptions · Wis. Stat. 281.34 and 281.346 · ASME B31.9 Building Services Piping · ASME B31.5 Refrigeration Piping
Frequently asked questions
Which mechanical contractor builds data halls in Milwaukee and Waukesha?
Paul Industries builds the mechanical systems for data halls in Milwaukee, Waukesha and the rest of southeast Wisconsin, from chiller plants and dry coolers to liquid cooling distribution inside existing buildings. Many Milwaukee projects are additions to operating halls, so the work is planned around valved tie-ins, prefabricated assemblies and isolation procedures agreed with the operator.
Does Paul Industries handle data center construction in Madison for research and enterprise halls?
Paul Industries takes data center mechanical work in Madison, Middleton, Fitchburg and the rest of Dane County, including research computing rooms in university and healthcare buildings and enterprise halls. Projects inside existing buildings start with a survey of chilled water capacity, roof structure and electrical service, since those usually decide the heat rejection layout.
Who installs mechanical systems for data centers in Green Bay, the Fox Valley and central Wisconsin?
Paul Industries installs data center mechanical systems in Green Bay, Appleton, Oshkosh, Sheboygan, Manitowoc, Wausau, Eau Claire and La Crosse. Those counties design for winters of minus 15 to minus 25, which puts freeze protection, glycol loops and heat tracing at the center of the yard and roof design, while the long cold season gives dry coolers and economizers their best operating case.
Which Wisconsin codes govern the mechanical work on a data center?
The Wisconsin Commercial Building Code, chapters SPS 361 to 366, incorporates the 2021 International Building Code, Mechanical Code and Energy Conservation Code from September 1, 2025. Refrigeration systems follow SPS 345 instead of the mechanical code’s chapter 11, boilers and pressure vessels follow SPS 341, and SPS 364.0313 sets balancing and operating manual requirements. Generator and water rules come from the DNR.
Does a Wisconsin data center need state plan review for the mechanical design?
Data center building plans go to the state safety and professional services department electronically, and the department owes a decision on a complete set within 15 business days. Municipalities that have taken on plan review handle buildings under 50,000 cubic feet, and buildings of 50,000 cubic feet or more are built under the supervision of a Wisconsin registered architect or engineer.
Are chillers on a Wisconsin data center registered with the state?
Any chiller charged with an A1 or B1 refrigerant and rated at 50 tons or above is registered under SPS 345 at least 20 business days before first operation, inspected by the department or its agent within 45 business days after installation, and then operate under a permit to operate. Refrigerant groups with flammability or higher toxicity register at 10 tons. Paul Industries prepares the records with the installation.
How does winter affect data center mechanical construction in Wisconsin?
Winter slows field welding, freezes test water in unheated sections, limits crane lifts and complicates exterior insulation. The answer is prefabrication of spools, skids and modules in heated bays, testing inside temporary enclosures or with glycol media, heated storage for equipment, and filling loops only when the building is heated or with glycol from the start. Paul Industries plans each of these into the schedule.
What is being built in Mount Pleasant, and what does it mean for mechanical trades?
Microsoft reported its first Mount Pleasant facility fully operational in June 2026 and its second, next door, under construction with completion scheduled for 2028. A campus that size draws heavily on pipefitters, fabricators and equipment, which tightens the market for other Wisconsin projects. Early procurement and off-site fabrication protect smaller jobs from that pressure. The campus is cited only as a market fact.
Do data center generators in Wisconsin need a DNR air permit?
The DNR’s permit exemption for emergency engines is capped at 3,000 kilowatts of combined output, applies only to clean fuels such as natural gas or low-sulfur distillate, and covers engines used 200 hours a year or less. A typical data center fleet is larger than that cap, so it operates under a DNR permit whose conditions the fuel and exhaust installation must match.
Does a Wisconsin data center need to report its water use?
A site with its own water supply able to withdraw an average of 100,000 gallons per day over any 30-day period registers with the DNR and reports monthly withdrawal volumes each year, and a well field that can pump more than 100,000 gallons a day needs DNR approval as a high capacity well before drilling. Sites on municipal water rely on the utility’s permits. Paul Industries places meters so every use is captured.
Which data center projects in Wisconsin are under construction?
Microsoft’s second Mount Pleasant facility is under construction with completion scheduled for 2028, Meta broke ground in Beaver Dam in November 2025, and the Lighthouse campus in Port Washington was still developing in October 2026. Many smaller enterprise, research and colocation projects run alongside them. These are market facts; Paul Industries takes mechanical work on Wisconsin projects of every size.
Can a Wisconsin data center campus be built in phases without shutting down earlier halls?
Phased building is the normal pattern, with mechanical blocks matched to utility capacity. Headers and yard piping are designed with valved connections for future blocks, each block is tested and commissioned before it carries load, and tie-ins to an operating block are made in planned windows. Paul Industries confirms redundancy in the live plant before each tie-in.
Which mechanical equipment has the longest lead times on a Wisconsin data center?
Chillers, CDUs, dry coolers, large pumps, plate heat exchangers and switchgear-dependent equipment such as large variable speed drives often carry the longest lead times, and cold-climate options can lengthen them. With several large campuses building in the region, owners lock these orders early. Paul Industries sequences procurement from the dates each block of load is due.
How are pressure vessels on a Wisconsin data center handled?
Boilers, expansion tanks and other pressure vessels at a place of employment fall under SPS 341, which requires welded repairs and alterations to follow the National Board Inspection Code. Pressure vessels inside a mechanical refrigeration system fall under the repair and alteration part of SPS 341 and under SPS 345. Paul Industries installs vessels with their nameplate and data report records kept for the owner’s file.
Can Paul Industries supply prefabricated modules for a Wisconsin data center without installing them?
Paul Industries supplies prefabricated pipe spools, pump skids, rack modules and manifold assemblies on a supply-only basis for Wisconsin projects, with weld and pressure test records and setting instructions. Owners who want fabrication, installation and startup under one contract get the same assemblies through design-build or complete installation.
Does Wisconsin require balancing reports on data center mechanical systems?
Under SPS 364.0313 each HVAC system gets balanced at installation, with hydronic flow set by pump speed or impeller trim before valves are throttled, controls calibrated, and an operating and maintenance manual given to the owner with control diagrams and sequences. Paul Industries delivers the balancing report and manual with the turnover package.
Which documents get a firm mechanical price for a Wisconsin data hall?
Send the design documents or concept, the IT load, rack density and redundancy, the heat rejection approach, the site and county, the utility schedule with target dates for each block of load, and whether the work is a new campus or inside an operating hall. Paul Industries prices concept-stage work as a budget range drawn from similar projects and fixes the number once design documents are issued.
Building a data hall or campus in Wisconsin?
Send the design or concept, IT load, site, utility schedule and target load dates. Call 201-450-8280 or request a quote.
