Paul Industries provides industrial welding services in Indiana for steel mills, refineries, pharmaceutical and food plants, assembly plants and utilities, welding structural steel, process and power piping, pressure equipment, tanks and stainless sanitary systems to AWS, ASME and National Board codes. Each weld is made to a written procedure qualified for the material and code, by a welder qualified to that procedure, with the examination and records the code requires. Paul Industries handles field welding inside operating Indiana plants and shop welding for prefabricated work under one contract.

Request a quote or call 201-450-8280

Headquarters 256 Shore Drive, Kilmarnock, Virginia
Structural codes AWS D1.1, D1.2 and D1.6
Pressure codes ASME Section IX, B31, NBIC Part 3
Boiler and vessel repair 675 IAC 30-5-11, National Board R program
Safety regime IOSHA state plan adopting OSHA standards
Steel Indiana leads US crude steel output
Reviewed November 2026

Which jobs fall under industrial welding services in Indiana?

Industrial welding services in Indiana cover every code weld a plant needs outside its production line: structural steel and platforms, pipe racks and supports, process, steam and utility piping, boiler and pressure vessel repairs, tank shells and bottoms, machinery bases and wear parts, and stainless high-purity systems. The work divides by the code that governs it, and the code decides how the procedure is qualified, how the welder is qualified, what examination follows and what records the owner keeps.

A welding service for industrial use differs from job-shop welding in three ways. The welds sit in operating plants, so hot work permits, fire watches, isolation and confined space entry are part of the job. The welds carry pressure, load or product, so they follow codes that require qualified procedures and examination. And the records outlive the welders, because the next inspector, auditor or engineer will ask for them. Paul Industries plans every project around those three facts.

Welding codes that apply at Indiana plants
WorkGoverning codeTypical examination
Structural steel, platforms, pipe racksAWS D1.1; D1.2 for aluminum, D1.6 for stainlessVisual inspection, ultrasonic testing of complete joint penetration welds
Process pipingASME B31.3 with ASME Section IX qualificationVisual and radiographic or ultrasonic examination by fluid service
Power and boiler external pipingASME Section I and B31.1Radiography or ultrasonics and, by thickness, postweld heat treatment
Boiler and pressure vessel repairsNBIC Part 3 under 675 IAC 30-5-11As the repair plan and the authorized inspector require
New pressure vesselsASME Section VIIIRadiography or ultrasonics per joint category; pressure test
Storage tank repairs and alterationsAPI 653 with API 650 welding rulesVacuum box, magnetic particle, radiography of shell repairs
High-purity stainless tubingASME BPEBorescope of product-contact welds, coupons, weld logs
Pipelines and gas transmissionAPI 1104Radiography or automated ultrasonics

Industrial welding: Indiana steel mills

Industrial welding in Indiana starts with steel, because the state leads the nation in crude steel production and its three integrated mills on Lake Michigan, Gary Works, Indiana Harbor and Burns Harbor, rank as the country’s biggest blast furnace plants by capacity. Mills consume welding around the clock: crane runways and rails, ladle and transfer car repairs, conveyor and stacker structures, gas mains and water lines, hydraulic piping, roll and mill stand rebuilds, and the structural steel of buildings that flex and crack under heavy loads and heat.

Mill welding is done in punishing conditions, and the procedures reflect it. Repairs on heavy sections need preheat and controlled interpass temperatures to avoid cracking; cast iron and cast steel components need procedures matched to their chemistry; hardfacing restores wear surfaces on rolls, chutes and crusher parts; and crane girder repairs need careful fatigue detailing so a cracked weld does not simply crack again. Paul Industries writes procedures for each repair type, qualifies them on the same material grades, and plans the work into mill outage windows and campaign changes.

Planned outages at Burns Harbor and Gary Works also bring larger welding scopes, such as blast furnace shell and cooling repairs, stove and gas main work and structural replacements. Those projects run to tight schedules with hundreds of welds, and Paul Industries staffs them with procedures, weld maps and examination plans ready before the furnace comes off wind.

Refinery and chemical plant welding

Refinery welding in Indiana centers on BP’s Whiting refinery, listed by the Energy Information Administration at 435,000 barrels per calendar day as of January 2026, and CountryMark’s Mount Vernon refinery at 36,700, plus the chemical and plastics plants along the Ohio River and in the Calumet region. Refinery welds follow ASME B31.3 and the owner’s specifications, with chrome-moly and stainless alloys, preheat, postweld heat treatment, hardness testing and positive material identification common requirements. Pressure vessel repairs in those plants follow API 510 and the National Board program, and Paul Industries prepares them as part of turnaround planning.

National Board repair welding on Indiana pressure equipment

Pressure welding on Indiana boilers and pressure vessels follows 675 IAC 30-5-11: a repair on any regulated unit is carried out within the National Board’s R program, the NR program covering nuclear items, and its methods come from Part 3 of the NBIC. The repair is planned with the authorized inspector before work begins, the welding procedure and welder are qualified under ASME Section IX, and the inspector accepts the finished repair before the unit returns to its Indiana operating permit.

Indiana’s rule also settles some daily questions: rolling in a replacement boiler tube is a repair, seal welding a tube plug is a repair, and rerolling an existing tube is maintenance. Rerates and other alterations are also NBIC Part 3 work, calculated with the stress values of the code edition the vessel was first built to. Paul Industries prepares the repair plan, procedures, material certifications and examination plan as one package for the inspector, then carries out the work through boiler repair in Indiana and pressure vessel fabrication in Indiana.

Pipe welding and stainless welding for Indiana process plants

Pipe welding for Indiana process plants covers carbon steel, stainless and alloy lines from half-inch instrument tubing to large headers, with procedures qualified under ASME Section IX for each material group and position. Root passes on critical lines are made with gas tungsten arc welding, and fill and cap passes with the process that suits the material and position; socket welds, branch connections and small-bore lines get the same procedure discipline as main runs. The complete systems are built through process piping in Indiana.

Stainless welding for pharmaceutical, animal health, food and device plants follows ASME BPE. Orbital welding machines make repeatable autogenous welds on sanitary tubing, with purge gas oxygen levels checked, sample coupons welded at the start of each shift and at changes, and every product-contact weld examined by borescope and logged. Eli Lilly’s active pharmaceutical ingredient site in Lebanon, under construction with a further $4.5 billion investment announced in May 2026, and the orthopedic manufacturers in Warsaw, where Zimmer Biomet is headquartered, are the kind of plants where weld records feed directly into validation. Paul Industries hands over weld maps, logs, coupons, borescope records and material traceability in the format the plant’s quality group uses, and the welded systems are cleaned and passivated through passivation services in Indiana.

Aluminum welding, Indianapolis and the transportation equipment plants

Aluminum welding serves Indiana’s transportation equipment makers, which account for about a quarter of the state’s manufacturing jobs according to the Bureau of Labor Statistics, and the recreational vehicle industry, which the RV Industry Association says builds 88 percent of the RVs produced in the United States and Canada in Indiana. Aluminum work for those plants includes fixtures, tooling, conveyors, platforms and structures, welded to AWS D1.2 where the code applies. Aluminum demands clean joints, controlled heat input and filler alloys matched to the base metal, and Paul Industries qualifies procedures for each alloy and temper it welds.

Structural welding and fabrication in Indiana plants

Structural welding in Indiana plants covers platforms, mezzanines, stairs, ladders and handrails, equipment supports, pipe racks, crane runways, monorails and building modifications, welded to AWS D1.1 for carbon steel. On structural welding fabrication, Indiana projects start with connection design and shop drawings, moves through shop fabrication with fit-up and welding inspection, and ends with field erection, bolting and field welds, with visual inspection on every weld and ultrasonic testing where the design calls for complete joint penetration.

New buildings and additions in Indiana go through the state’s design release process, and the structural drawings submitted for that release set the welding and inspection requirements for the steel. For plant modifications inside existing buildings, the plant’s engineer of record sets those requirements, and Paul Industries follows them. Larger structural packages run through structural steel fabrication.

Weld quality records an Indiana owner should receive
RecordWhat it provesWhere it is required
Welding procedure specification and procedure qualification recordThe method was tested and produces sound welds in that materialASME Section IX, AWS D1.1, API 1104
Welder performance qualifications and continuity logEach welder is qualified for the process, position and thicknessAll codes listed above
Weld map and logWhich welder made which weld, when, to which procedureASME BPE, owner specifications, B31.3 traceability
Examination reportsVisual, radiographic, ultrasonic, magnetic particle or penetrant resultsPer code and owner specification
Heat treatment chartsPreheat and postweld heat treatment met time and temperature limitsB31.1, B31.3, Section VIII for thicker or alloy welds
Material test reports and PMI resultsBase metal and filler match the specificationAll pressure work; alloy service
NBIC repair or alteration formThe repair was made and accepted under the National Board program675 IAC 30 regulated boilers and vessels

Welding processes and where each fits

Welding processes are chosen for the material, position, thickness and quality the joint needs, and a single Indiana plant project often uses four or five of them. Shielded metal arc welding remains the field standard for structural and carbon steel pipe in wind and awkward positions; gas tungsten arc welding gives clean, controlled roots on pipe and suits thin stainless; flux-cored and gas metal arc welding deliver high deposition on structural steel and plate; submerged arc welding suits long shop seams on tanks and vessels; and orbital gas tungsten arc welding produces repeatable sanitary tube welds.

Welding processes used on Indiana plant work
ProcessStrengthsTypical Indiana use
Shielded metal arc (stick)Portable, tolerant of wind and positionStructural repairs, carbon steel pipe, mill maintenance
Gas tungsten arc (TIG)Clean, controlled roots; thin and alloy materialsPipe roots, stainless, chrome-moly, aluminum
Flux-cored arcHigh deposition, good out-of-positionStructural steel, heavy plate, hardfacing
Gas metal arc (MIG)Fast and clean in the shopSpool fill passes, aluminum fabrication, light structures
Submerged arcDeep penetration on long seamsTank shells and vessel seams in the shop
Orbital GTAWRepeatable, documented weldsSanitary tubing at pharmaceutical, device and food plants

Preheat, postweld heat treatment and hydrogen control

Preheat and postweld heat treatment protect welds in thick sections and hardenable steels from cracking, and Indiana’s heavy industry uses both constantly. Preheat slows the cooling of the weld and the surrounding metal, which lets hydrogen escape and keeps hardness down; postweld heat treatment relieves residual stress and tempers hard zones after welding. Chrome-moly steam and refinery piping, thick carbon steel vessel nozzles, crane girders and mill castings all carry preheat requirements, and many carry postweld heat treatment as well.

Hydrogen control is the other half of crack prevention. Low-hydrogen electrodes are stored in heated ovens once opened, flux-cored wire is kept dry, joints are cleaned of oil, paint and moisture, and Indiana’s winter weather is accounted for with enclosures and heat so cold, damp steel never receives weld metal. Paul Industries records preheat and interpass temperatures and heat treatment charts as part of the weld record, so an inspector or engineer can confirm each weld received the thermal cycle its procedure required.

Nondestructive examination and weld acceptance

Nondestructive examination confirms that a finished weld meets the code without destroying it, and the method depends on the joint and the code. Visual inspection is required on every weld; radiography and ultrasonic testing find internal flaws in butt welds; magnetic particle testing finds surface cracks in carbon steel; liquid penetrant does the same for stainless and aluminum; and borescope examination checks the inside surface of sanitary tube welds. Phased array ultrasonics increasingly replaces radiography in operating plants because it needs no radiation exclusion zone.

Acceptance criteria come from the governing code, and a weld acceptable under one code can be rejectable under another, so Paul Industries states the code and acceptance standard on every examination request. Rejected welds are repaired to the same procedure, re-examined and logged, and the repair rate is tracked by welder and procedure so problems are caught early in a project rather than at turnover.

Machinery bases, wear parts and production equipment

Production equipment in Indiana plants needs welding that keeps lines running: machinery bases and soleplates, broken frames and housings, gear guards, conveyor structures, press and stamping equipment repairs, and wear surfaces on chutes, hoppers and rolls. Cast iron repairs need special procedures with preheat or peening and nickel fillers, and repairs to precision equipment need distortion control so alignment is preserved. Paul Industries plans those repairs with the plant’s maintenance and reliability engineers and documents the procedure for the next time the part wears.

Hot work safety in operating Indiana plants

Hot work safety in Indiana plants follows the Indiana Occupational Safety and Health Administration, which runs an OSHA-approved state plan covering most private employers and state and municipal government and adopts the federal OSHA standards, including the welding, cutting and brazing rules in 29 CFR 1910 Subpart Q. Plants add their own hot work permit systems, often built on NFPA 51B, with fire watches, combustible clearances, gas testing and isolation of adjacent systems.

Stainless and alloy welding adds an exposure issue: welding fumes from chromium-bearing metals contain hexavalent chromium, which OSHA’s standard at 29 CFR 1910.1026 limits to 5 micrograms per cubic meter as an eight-hour average. Paul Industries uses fume extraction, process selection and exposure monitoring to stay under that limit, and plans confined space entry, lockout and atmospheric testing for welding inside vessels, tanks and ducts. Those plans are written for each job and reviewed with the plant’s safety staff before the first arc. Gas cylinders are secured and separated, welding leads and grounds are inspected, and the welding return is clamped close to the work so current never passes through bearings, instruments or structural connections that could be damaged.

Tank and heavy plate welding

Tank and heavy plate welding in Indiana covers storage tank bottoms and shells, nozzle additions, roof repairs and complete new tanks, welded to API 650 for new construction and API 653 for repairs and alterations. Bottom replacements and floor-to-shell welds are examined by vacuum box and magnetic particle testing, shell repairs by radiography, and the repaired tank is hydrostatically tested where API 653 requires. Paul Industries builds and repairs tanks for refineries, mills, utilities and process plants through tank fabrication in Indiana.

Heavy plate work also includes mill equipment, hoppers, chutes, bins, ductwork and stacks, where abrasion-resistant plate, hardfacing and wear liners extend service life. Wear components are rebuilt with overlays chosen for the abrasion and impact they face, and Paul Industries records the overlay procedure so the next rebuild matches the last.

Where does Indiana’s welding work concentrate?

Welding services across Indiana follow the state’s industrial map, and Paul Industries takes work in every region under the same procedures and records.

Welding services, Indianapolis and Central Indiana

Welding services in Indianapolis and the surrounding counties serve pharmaceutical and animal health plants, engine and parts plants, food and beverage producers, hospitals and universities, with stainless sanitary welding at drug plants in Indianapolis and Lebanon and structural and piping work across the rest.

Welding services, Fort Wayne, South Bend, Elkhart and Warsaw

Structural and pipe welding, Fort Wayne’s assembly plants included, and welding services in South Bend and Elkhart serve assembly, food and recreational vehicle plants, while Warsaw’s orthopedic device makers need stainless utility and process systems welded to the standards their quality systems demand.

Pipe and structural welding, Evansville and the Ohio River counties

Welding in Evansville, Mount Vernon and the Ohio River counties serves chemical, plastics, food and refining plants, with alloy piping and pressure equipment repairs a large share of the work. Lafayette, Kokomo and Columbus round out the map with automotive, engine and food plants that need structural, piping and machinery welding during model changeovers and shutdowns.

What drives the cost of industrial welding in Indiana?

The cost of industrial welding services in Indiana depends on the code and examination required, the materials and their thickness, procedure qualification needs, preheat and postweld heat treatment, access, scaffolding and confined space requirements, hot work controls, the shift pattern and outage premiums, and the records the owner needs. A carbon steel structural repair with visual inspection costs a fraction of an alloy pressure repair with radiography, heat treatment and National Board documentation.

Public projects in Indiana carry no state wage schedule because the Common Construction Wage Act was repealed effective July 1, 2015, unless federal funding brings Davis-Bacon rates. Paul Industries gives a budget range from photographs, drawings and a description of the work, then a firm price once the weld count, procedures and examination plan are fixed.

Who provides industrial welding services in Indiana?

Paul Industries provides industrial welding services in Indiana as one of the welding companies in Indiana’s industrial market that combines procedure development, welder qualification, field and shop welding, examination and turnover records under one contract. Plants searching for Indiana welding and fabricating support get structural, piping, pressure, tank, stainless and wear welding from a single source, with shop fabrication supplied for the plant to place, design-build or complete installation as the project needs.

Headquartered on Virginia’s Northern Neck at 256 Shore Drive, Kilmarnock, where it performs industrial welding services in Virginia, Paul Industries grew from earlier bases in northern New Jersey and then Pennsylvania. It accepts welding work across Indiana, the Midwest and all 50 states, using the procedures behind industrial welding services in Pennsylvania.

Paul Industries welding scope for Indiana plants

Paul Industries welds structural steel, process and power piping, boilers and pressure vessels, tanks, stainless sanitary systems and mill equipment for Indiana plants, with qualified procedures, qualified welders, examination and complete records. Welding across the country is described under industrial welding services, and every service offered to Indiana owners appears on the Indiana overview. Send photographs, drawings and the outage window and request a quote.

Standards referenced: AWS D1.1 Structural Welding Code, Steel · AWS D1.2 Structural Welding Code, Aluminum · AWS D1.6 Structural Welding Code, Stainless Steel · ASME Boiler and Pressure Vessel Code Section IX · National Board Inspection Code Part 3 · 675 IAC 30, Indiana Boiler and Pressure Vessel Rules · ASME B31.1 and B31.3 · ASME BPE · API 1104 · API 653 · 29 CFR 1910 Subpart Q and 29 CFR 1910.1026 · NFPA 51B

Frequently asked questions

Who provides industrial welding, Indianapolis and Lebanon drug plants included?

Paul Industries provides structural, piping and orbital stainless welding for pharmaceutical, animal health, food and engine plants in Indianapolis, Lebanon and Central Indiana. Sanitary welds there follow ASME BPE with coupons, borescope records and weld logs, and utility and structural welds follow ASME Section IX and AWS D1.1, all delivered in the plant’s documentation format.

Does Paul Industries offer welding services, Fort Wayne to South Bend and Elkhart?

Paul Industries offers structural, piping, aluminum and machinery welding for assembly, food and recreational vehicle plants in Fort Wayne, South Bend, Elkhart and the rest of Northern Indiana. Work is scheduled into model changeovers, holiday shutdowns and weekend windows, with procedures and materials ready before the line stops.

Who handles mill welding at Gary Works, Indiana Harbor and Burns Harbor?

Paul Industries handles crane runway, ladle, conveyor, gas main, piping, structural and wear part welding for steel mills in Northwest Indiana. Heavy-section repairs use preheat, controlled interpass temperatures and procedures qualified on the same grades, and outage work arrives with weld maps and examination plans already approved.

Who welds alloy piping for plants in Evansville and Mount Vernon?

Paul Industries welds chrome-moly, stainless and carbon steel piping and repairs pressure equipment at refineries, chemical and plastics producers and food processors around Evansville, Mount Vernon and the Ohio River counties. Alloy work includes preheat, postweld heat treatment, hardness testing and positive material identification as the specification requires.

Does a boiler weld repair in Indiana need the National Board R program?

Yes for welded repairs on regulated units: Indiana places boiler and vessel repairs inside the National Board R program, with NBIC Part 3 setting the method. The authorized inspector is consulted on the repair before welding starts and accepts it before the unit returns to service under its Indiana operating permit.

What is the difference between a WPS and a PQR?

A welding procedure specification is the written instruction a welder follows: process, filler, preheat, heat input, position and other variables. The procedure qualification record documents the test weld that proved those variables produce a sound joint, with its mechanical test results. Codes such as ASME Section IX and AWS D1.1 require both, and Paul Industries keeps them in the turnover package.

How are welders qualified for code work at Indiana plants?

Welders are qualified by welding test coupons to a qualified procedure in the process, position and thickness range they will weld, then passing visual and bend or radiographic testing under ASME Section IX, AWS D1.1 or API 1104. Qualifications stay active through a continuity log showing the welder has used the process regularly. Paul Industries provides those records with every project.

Which welding code applies to a new platform in an Indiana plant?

A new steel platform, stair or pipe rack in an Indiana plant is welded to AWS D1.1, with D1.2 for aluminum and D1.6 for stainless. The design engineer specifies the weld sizes, joint types and inspection, and new buildings or additions carry those requirements through the state’s design release drawings. Paul Industries fabricates and installs to the stamped drawings.

What safety rules govern welding in Indiana workplaces?

Welding in most Indiana workplaces falls under IOSHA, the state’s OSHA-approved plan, which adopts the federal standards including 29 CFR 1910 Subpart Q for welding, cutting and brazing and 29 CFR 1910.1026 for hexavalent chromium. Plant hot work permits, often based on NFPA 51B, add fire watches and clearances. Paul Industries writes a job-specific safety plan for every welding scope.

How is hexavalent chromium controlled when welding stainless in Indiana?

Hexavalent chromium from stainless and alloy welding fumes is limited by OSHA’s standard to 5 micrograms per cubic meter as an eight-hour average, and IOSHA enforces the same limit in Indiana. Paul Industries controls exposure with source-capture fume extraction, process choices that generate less fume, ventilation in enclosed spaces and exposure monitoring.

Can welding be done inside an operating Indiana plant without a shutdown?

Much plant welding happens while production runs, under hot work permits with fire watches, isolation of adjacent systems, gas testing and barriers. Welds on live process lines are limited to qualified hot tap and line stop work where the service allows. Paul Industries plans the sequence with plant operations so tie-ins needing a shutdown are grouped into the fewest outages.

What examination follows a structural weld repair on a crane runway?

A crane runway weld repair is examined visually and, depending on the joint and the engineer’s requirements, by magnetic particle or ultrasonic testing to confirm the crack was removed and the new weld is sound. Fatigue-loaded details are often redesigned so the repaired joint does not concentrate stress again. Paul Industries records each repair location for future inspections.

Do tank repairs in Indiana follow API 653?

Repairs and alterations to aboveground storage tanks built to API 650 follow API 653, which sets the welding, examination and hydrostatic test requirements for shell, bottom and nozzle work. Bottom welds are vacuum box tested, shell repairs radiographed where required, and the tank’s records updated. Paul Industries performs and documents those repairs for Indiana tank owners.

What records come with orbital welds at an Indiana pharmaceutical plant?

Orbital welds at an Indiana pharmaceutical plant come with weld maps, weld logs, machine settings, start-of-shift and change coupons, borescope records of product-contact welds, purge gas verification, material heat numbers and slope checks. Paul Industries delivers them in the plant’s turnover format, so installation qualification draws directly on the welding records.

What sets the outage time for a weld repair at an Indiana plant?

A welding repair’s duration depends on access, preparation, preheat and postweld heat treatment, the number of welds, examination turnaround and any pressure test. Procedures, materials and examination are lined up before the equipment is released, so the time inside the outage goes to welding and testing. Paul Industries states the outage duration it needs in the proposal.

Which photographs and drawings help price Indiana welding work?

Send photographs, drawings or sketches, the material and thickness, the governing code or specification, access conditions, the outage window and any documentation the plant requires. From those, Paul Industries sets a budget figure based on similar repairs, then fixes the price when the weld count, procedures and examination plan are settled.

Need code welding at an Indiana plant?

Send photographs, drawings, the material and code, and the outage window. Call 201-450-8280 or request a quote.